378 lines
10 KiB
C
378 lines
10 KiB
C
/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* Copyright (C) 2005-6 DiBcom, SA
|
|
*/
|
|
#include "dib0700.h"
|
|
|
|
#include "dib3000mc.h"
|
|
#include "dib7000m.h"
|
|
#include "dib7000p.h"
|
|
#include "mt2060.h"
|
|
|
|
static int force_lna_activation;
|
|
module_param(force_lna_activation, int, 0644);
|
|
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
|
|
"if applicable for the device (default: 0=automatic/off).");
|
|
|
|
/* Hauppauge Nova-T 500
|
|
* has a LNA on GPIO0 which is enabled by setting 1 */
|
|
static struct mt2060_config bristol_mt2060_config[2] = {
|
|
{
|
|
.i2c_address = 0x60,
|
|
.clock_out = 3,
|
|
}, {
|
|
.i2c_address = 0x61,
|
|
}
|
|
};
|
|
|
|
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
|
|
.band_caps = BAND_VHF | BAND_UHF,
|
|
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
|
|
|
|
.agc1_max = 42598,
|
|
.agc1_min = 17694,
|
|
.agc2_max = 45875,
|
|
.agc2_min = 0,
|
|
|
|
.agc1_pt1 = 0,
|
|
.agc1_pt2 = 59,
|
|
|
|
.agc1_slope1 = 0,
|
|
.agc1_slope2 = 69,
|
|
|
|
.agc2_pt1 = 0,
|
|
.agc2_pt2 = 59,
|
|
|
|
.agc2_slope1 = 111,
|
|
.agc2_slope2 = 28,
|
|
};
|
|
|
|
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
|
|
{ .agc = &bristol_dib3000p_mt2060_agc_config,
|
|
.max_time = 0x196,
|
|
.ln_adc_level = 0x1cc7,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
},
|
|
{ .agc = &bristol_dib3000p_mt2060_agc_config,
|
|
.max_time = 0x196,
|
|
.ln_adc_level = 0x1cc7,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
}
|
|
};
|
|
|
|
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
if (adap->id == 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
|
|
|
|
if (force_lna_activation)
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
else
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
|
|
|
|
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
st->mt2060_if1[adap->id] = 1220;
|
|
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
|
|
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
|
|
return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &bristol_mt2060_config[adap->id],
|
|
st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
|
|
static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
|
|
BAND_UHF | BAND_VHF, // band_caps
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
|
|
|
|
712, // inv_gain
|
|
41, // time_stabiliz
|
|
|
|
0, // alpha_level
|
|
118, // thlock
|
|
|
|
0, // wbd_inv
|
|
4095, // wbd_ref
|
|
0, // wbd_sel
|
|
0, // wbd_alpha
|
|
|
|
42598, // agc1_max
|
|
17694, // agc1_min
|
|
45875, // agc2_max
|
|
2621, // agc2_min
|
|
0, // agc1_pt1
|
|
76, // agc1_pt2
|
|
139, // agc1_pt3
|
|
52, // agc1_slope1
|
|
59, // agc1_slope2
|
|
107, // agc2_pt1
|
|
172, // agc2_pt2
|
|
57, // agc2_slope1
|
|
70, // agc2_slope2
|
|
|
|
21, // alpha_mant
|
|
25, // alpha_exp
|
|
28, // beta_mant
|
|
48, // beta_exp
|
|
|
|
1, // perform_agc_softsplit
|
|
{ 0, // split_min
|
|
107, // split_max
|
|
51800, // global_split_min
|
|
24700 // global_split_max
|
|
},
|
|
};
|
|
|
|
static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
|
|
BAND_UHF | BAND_VHF,
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
|
|
|
|
712, // inv_gain
|
|
41, // time_stabiliz
|
|
|
|
0, // alpha_level
|
|
118, // thlock
|
|
|
|
0, // wbd_inv
|
|
4095, // wbd_ref
|
|
0, // wbd_sel
|
|
0, // wbd_alpha
|
|
|
|
42598, // agc1_max
|
|
16384, // agc1_min
|
|
42598, // agc2_max
|
|
0, // agc2_min
|
|
|
|
0, // agc1_pt1
|
|
137, // agc1_pt2
|
|
255, // agc1_pt3
|
|
|
|
0, // agc1_slope1
|
|
255, // agc1_slope2
|
|
|
|
0, // agc2_pt1
|
|
0, // agc2_pt2
|
|
|
|
0, // agc2_slope1
|
|
41, // agc2_slope2
|
|
|
|
15, // alpha_mant
|
|
25, // alpha_exp
|
|
|
|
28, // beta_mant
|
|
48, // beta_exp
|
|
|
|
0, // perform_agc_softsplit
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config stk7700p_pll_config = {
|
|
60000, 30000, // internal, sampling
|
|
1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
|
|
0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
|
|
(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
|
|
60258167, // ifreq
|
|
20452225, // timf
|
|
};
|
|
|
|
static struct dib7000m_config stk7700p_dib7000m_config = {
|
|
.dvbt_mode = 1,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
.quartz_direct = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &stk7700p_7000m_mt2060_agc_config,
|
|
.bw = &stk7700p_pll_config,
|
|
|
|
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
|
|
};
|
|
|
|
static struct dib7000p_config stk7700p_dib7000p_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc = &stk7700p_7000p_mt2060_agc_config,
|
|
.bw = &stk7700p_pll_config,
|
|
|
|
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
|
|
};
|
|
|
|
static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
/* unless there is no real power management in DVB - we leave the device on GPIO6 */
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
st->mt2060_if1[0] = 1220;
|
|
|
|
if (dib7000pc_detection(&adap->dev->i2c_adap)) {
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
|
|
st->is_dib7000pc = 1;
|
|
} else
|
|
adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static struct mt2060_config stk7700p_mt2060_config = {
|
|
0x60
|
|
};
|
|
|
|
static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
struct i2c_adapter *tun_i2c;
|
|
|
|
if (st->is_dib7000pc)
|
|
tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
else
|
|
tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
|
|
st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
struct usb_device_id dib0700_usb_id_table[] = {
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
|
|
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
|
|
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
|
|
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
|
|
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
|
|
|
|
#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER, \
|
|
.usb_ctrl = DEVICE_SPECIFIC, \
|
|
.firmware = "dvb-usb-dib0700-01.fw", \
|
|
.download_firmware = dib0700_download_firmware, \
|
|
.no_reconnect = 1, \
|
|
.size_of_priv = sizeof(struct dib0700_state), \
|
|
.i2c_algo = &dib0700_i2c_algo, \
|
|
.identify_state = dib0700_identify_state
|
|
|
|
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
|
|
.streaming_ctrl = dib0700_streaming_ctrl, \
|
|
.stream = { \
|
|
.type = USB_BULK, \
|
|
.count = 4, \
|
|
.endpoint = ep, \
|
|
.u = { \
|
|
.bulk = { \
|
|
.buffersize = 39480, \
|
|
} \
|
|
} \
|
|
}
|
|
|
|
struct dvb_usb_device_properties dib0700_devices[] = {
|
|
{
|
|
DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = stk7700p_frontend_attach,
|
|
.tuner_attach = stk7700p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 6,
|
|
.devices = {
|
|
{ "DiBcom STK7700P reference design",
|
|
{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-T Stick",
|
|
{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "AVerMedia AVerTV DVB-T Volar",
|
|
{ &dib0700_usb_id_table[5], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Compro Videomate U500",
|
|
{ &dib0700_usb_id_table[6], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Uniwill STK7700P based (Hama and others)",
|
|
{ &dib0700_usb_id_table[7], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
|
|
{ &dib0700_usb_id_table[8], NULL },
|
|
{ NULL },
|
|
}
|
|
}
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = bristol_frontend_attach,
|
|
.tuner_attach = bristol_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
}, {
|
|
.frontend_attach = bristol_frontend_attach,
|
|
.tuner_attach = bristol_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
|
}
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "Hauppauge Nova-T 500 Dual DVB-T",
|
|
{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
|
|
{ NULL },
|
|
},
|
|
}
|
|
}
|
|
};
|
|
|
|
int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
|