b1b4e435e4
When detecting a serial port on newer PA-RISC machines (with iosapic) we have a long way to go to find the right IRQ line, registering it, then registering the serial port and the irq handler for the serial port. During this phase spurious interrupts for the serial port may happen which then crashes the kernel because the action handler might not have been set up yet. So, basically it's a race condition between the serial port hardware and the CPU which sets up the necessary fields in the irq sructs. The main reason for this race is, that we unmask the serial port irqs too early without having set up everything properly before (which isn't easily possible because we need the IRQ number to register the serial ports). This patch is a work-around for this problem. It adds checks to the CPU irq handler to verify if the IRQ action field has been initialized already. If not, we just skip this interrupt (which isn't critical for a serial port at bootup). The real fix would probably involve rewriting all PA-RISC specific IRQ code (for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of the irq chips and proper irq enabling along this line. This bug has been in the PA-RISC port since the beginning, but the crashes happened very rarely with currently used hardware. But on the latest machine which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900, 1GHz) and which has the largest possible L1 cache size (64MB each), the kernel crashed at every boot because of this race. So, without this patch the machine would currently be unuseable. For the record, here is the flow logic: 1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq(). 2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq. 3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq 4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!) 5. serial_init_chip() then registers the 8250 port. Problems: - In step 4 the CPU irq shouldn't have been registered yet, but after step 5 - If serial irq happens between 4 and 5 have finished, the kernel will crash Signed-off-by: Helge Deller <deller@gmx.de>
606 lines
15 KiB
C
606 lines
15 KiB
C
/*
|
|
* Code to handle x86 style IRQs plus some generic interrupt stuff.
|
|
*
|
|
* Copyright (C) 1992 Linus Torvalds
|
|
* Copyright (C) 1994, 1995, 1996, 1997, 1998 Ralf Baechle
|
|
* Copyright (C) 1999 SuSE GmbH (Philipp Rumpf, prumpf@tux.org)
|
|
* Copyright (C) 1999-2000 Grant Grundler
|
|
* Copyright (c) 2005 Matthew Wilcox
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/types.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/smp.h>
|
|
#include <asm/ldcw.h>
|
|
|
|
#undef PARISC_IRQ_CR16_COUNTS
|
|
|
|
extern irqreturn_t timer_interrupt(int, void *);
|
|
extern irqreturn_t ipi_interrupt(int, void *);
|
|
|
|
#define EIEM_MASK(irq) (1UL<<(CPU_IRQ_MAX - irq))
|
|
|
|
/* Bits in EIEM correlate with cpu_irq_action[].
|
|
** Numbered *Big Endian*! (ie bit 0 is MSB)
|
|
*/
|
|
static volatile unsigned long cpu_eiem = 0;
|
|
|
|
/*
|
|
** local ACK bitmap ... habitually set to 1, but reset to zero
|
|
** between ->ack() and ->end() of the interrupt to prevent
|
|
** re-interruption of a processing interrupt.
|
|
*/
|
|
static DEFINE_PER_CPU(unsigned long, local_ack_eiem) = ~0UL;
|
|
|
|
static void cpu_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned long eirr_bit = EIEM_MASK(d->irq);
|
|
|
|
cpu_eiem &= ~eirr_bit;
|
|
/* Do nothing on the other CPUs. If they get this interrupt,
|
|
* The & cpu_eiem in the do_cpu_irq_mask() ensures they won't
|
|
* handle it, and the set_eiem() at the bottom will ensure it
|
|
* then gets disabled */
|
|
}
|
|
|
|
static void __cpu_unmask_irq(unsigned int irq)
|
|
{
|
|
unsigned long eirr_bit = EIEM_MASK(irq);
|
|
|
|
cpu_eiem |= eirr_bit;
|
|
|
|
/* This is just a simple NOP IPI. But what it does is cause
|
|
* all the other CPUs to do a set_eiem(cpu_eiem) at the end
|
|
* of the interrupt handler */
|
|
smp_send_all_nop();
|
|
}
|
|
|
|
static void cpu_unmask_irq(struct irq_data *d)
|
|
{
|
|
__cpu_unmask_irq(d->irq);
|
|
}
|
|
|
|
void cpu_ack_irq(struct irq_data *d)
|
|
{
|
|
unsigned long mask = EIEM_MASK(d->irq);
|
|
int cpu = smp_processor_id();
|
|
|
|
/* Clear in EIEM so we can no longer process */
|
|
per_cpu(local_ack_eiem, cpu) &= ~mask;
|
|
|
|
/* disable the interrupt */
|
|
set_eiem(cpu_eiem & per_cpu(local_ack_eiem, cpu));
|
|
|
|
/* and now ack it */
|
|
mtctl(mask, 23);
|
|
}
|
|
|
|
void cpu_eoi_irq(struct irq_data *d)
|
|
{
|
|
unsigned long mask = EIEM_MASK(d->irq);
|
|
int cpu = smp_processor_id();
|
|
|
|
/* set it in the eiems---it's no longer in process */
|
|
per_cpu(local_ack_eiem, cpu) |= mask;
|
|
|
|
/* enable the interrupt */
|
|
set_eiem(cpu_eiem & per_cpu(local_ack_eiem, cpu));
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
int cpu_check_affinity(struct irq_data *d, const struct cpumask *dest)
|
|
{
|
|
int cpu_dest;
|
|
|
|
/* timer and ipi have to always be received on all CPUs */
|
|
if (irqd_is_per_cpu(d))
|
|
return -EINVAL;
|
|
|
|
/* whatever mask they set, we just allow one CPU */
|
|
cpu_dest = cpumask_first_and(dest, cpu_online_mask);
|
|
|
|
return cpu_dest;
|
|
}
|
|
|
|
static int cpu_set_affinity_irq(struct irq_data *d, const struct cpumask *dest,
|
|
bool force)
|
|
{
|
|
int cpu_dest;
|
|
|
|
cpu_dest = cpu_check_affinity(d, dest);
|
|
if (cpu_dest < 0)
|
|
return -1;
|
|
|
|
cpumask_copy(irq_data_get_affinity_mask(d), dest);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct irq_chip cpu_interrupt_type = {
|
|
.name = "CPU",
|
|
.irq_mask = cpu_mask_irq,
|
|
.irq_unmask = cpu_unmask_irq,
|
|
.irq_ack = cpu_ack_irq,
|
|
.irq_eoi = cpu_eoi_irq,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = cpu_set_affinity_irq,
|
|
#endif
|
|
/* XXX: Needs to be written. We managed without it so far, but
|
|
* we really ought to write it.
|
|
*/
|
|
.irq_retrigger = NULL,
|
|
};
|
|
|
|
DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
|
|
#define irq_stats(x) (&per_cpu(irq_stat, x))
|
|
|
|
/*
|
|
* /proc/interrupts printing for arch specific interrupts
|
|
*/
|
|
int arch_show_interrupts(struct seq_file *p, int prec)
|
|
{
|
|
int j;
|
|
|
|
#ifdef CONFIG_DEBUG_STACKOVERFLOW
|
|
seq_printf(p, "%*s: ", prec, "STK");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->kernel_stack_usage);
|
|
seq_puts(p, " Kernel stack usage\n");
|
|
# ifdef CONFIG_IRQSTACKS
|
|
seq_printf(p, "%*s: ", prec, "IST");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage);
|
|
seq_puts(p, " Interrupt stack usage\n");
|
|
# endif
|
|
#endif
|
|
#ifdef CONFIG_SMP
|
|
seq_printf(p, "%*s: ", prec, "RES");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
|
|
seq_puts(p, " Rescheduling interrupts\n");
|
|
#endif
|
|
seq_printf(p, "%*s: ", prec, "UAH");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count);
|
|
seq_puts(p, " Unaligned access handler traps\n");
|
|
seq_printf(p, "%*s: ", prec, "FPA");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count);
|
|
seq_puts(p, " Floating point assist traps\n");
|
|
seq_printf(p, "%*s: ", prec, "TLB");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
|
|
seq_puts(p, " TLB shootdowns\n");
|
|
return 0;
|
|
}
|
|
|
|
int show_interrupts(struct seq_file *p, void *v)
|
|
{
|
|
int i = *(loff_t *) v, j;
|
|
unsigned long flags;
|
|
|
|
if (i == 0) {
|
|
seq_puts(p, " ");
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, " CPU%d", j);
|
|
|
|
#ifdef PARISC_IRQ_CR16_COUNTS
|
|
seq_printf(p, " [min/avg/max] (CPU cycle counts)");
|
|
#endif
|
|
seq_putc(p, '\n');
|
|
}
|
|
|
|
if (i < NR_IRQS) {
|
|
struct irq_desc *desc = irq_to_desc(i);
|
|
struct irqaction *action;
|
|
|
|
raw_spin_lock_irqsave(&desc->lock, flags);
|
|
action = desc->action;
|
|
if (!action)
|
|
goto skip;
|
|
seq_printf(p, "%3d: ", i);
|
|
#ifdef CONFIG_SMP
|
|
for_each_online_cpu(j)
|
|
seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
|
|
#else
|
|
seq_printf(p, "%10u ", kstat_irqs(i));
|
|
#endif
|
|
|
|
seq_printf(p, " %14s", irq_desc_get_chip(desc)->name);
|
|
#ifndef PARISC_IRQ_CR16_COUNTS
|
|
seq_printf(p, " %s", action->name);
|
|
|
|
while ((action = action->next))
|
|
seq_printf(p, ", %s", action->name);
|
|
#else
|
|
for ( ;action; action = action->next) {
|
|
unsigned int k, avg, min, max;
|
|
|
|
min = max = action->cr16_hist[0];
|
|
|
|
for (avg = k = 0; k < PARISC_CR16_HIST_SIZE; k++) {
|
|
int hist = action->cr16_hist[k];
|
|
|
|
if (hist) {
|
|
avg += hist;
|
|
} else
|
|
break;
|
|
|
|
if (hist > max) max = hist;
|
|
if (hist < min) min = hist;
|
|
}
|
|
|
|
avg /= k;
|
|
seq_printf(p, " %s[%d/%d/%d]", action->name,
|
|
min,avg,max);
|
|
}
|
|
#endif
|
|
|
|
seq_putc(p, '\n');
|
|
skip:
|
|
raw_spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
|
|
if (i == NR_IRQS)
|
|
arch_show_interrupts(p, 3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
** The following form a "set": Virtual IRQ, Transaction Address, Trans Data.
|
|
** Respectively, these map to IRQ region+EIRR, Processor HPA, EIRR bit.
|
|
**
|
|
** To use txn_XXX() interfaces, get a Virtual IRQ first.
|
|
** Then use that to get the Transaction address and data.
|
|
*/
|
|
|
|
int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data)
|
|
{
|
|
if (irq_has_action(irq))
|
|
return -EBUSY;
|
|
if (irq_get_chip(irq) != &cpu_interrupt_type)
|
|
return -EBUSY;
|
|
|
|
/* for iosapic interrupts */
|
|
if (type) {
|
|
irq_set_chip_and_handler(irq, type, handle_percpu_irq);
|
|
irq_set_chip_data(irq, data);
|
|
__cpu_unmask_irq(irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int txn_claim_irq(int irq)
|
|
{
|
|
return cpu_claim_irq(irq, NULL, NULL) ? -1 : irq;
|
|
}
|
|
|
|
/*
|
|
* The bits_wide parameter accommodates the limitations of the HW/SW which
|
|
* use these bits:
|
|
* Legacy PA I/O (GSC/NIO): 5 bits (architected EIM register)
|
|
* V-class (EPIC): 6 bits
|
|
* N/L/A-class (iosapic): 8 bits
|
|
* PCI 2.2 MSI: 16 bits
|
|
* Some PCI devices: 32 bits (Symbios SCSI/ATM/HyperFabric)
|
|
*
|
|
* On the service provider side:
|
|
* o PA 1.1 (and PA2.0 narrow mode) 5-bits (width of EIR register)
|
|
* o PA 2.0 wide mode 6-bits (per processor)
|
|
* o IA64 8-bits (0-256 total)
|
|
*
|
|
* So a Legacy PA I/O device on a PA 2.0 box can't use all the bits supported
|
|
* by the processor...and the N/L-class I/O subsystem supports more bits than
|
|
* PA2.0 has. The first case is the problem.
|
|
*/
|
|
int txn_alloc_irq(unsigned int bits_wide)
|
|
{
|
|
int irq;
|
|
|
|
/* never return irq 0 cause that's the interval timer */
|
|
for (irq = CPU_IRQ_BASE + 1; irq <= CPU_IRQ_MAX; irq++) {
|
|
if (cpu_claim_irq(irq, NULL, NULL) < 0)
|
|
continue;
|
|
if ((irq - CPU_IRQ_BASE) >= (1 << bits_wide))
|
|
continue;
|
|
return irq;
|
|
}
|
|
|
|
/* unlikely, but be prepared */
|
|
return -1;
|
|
}
|
|
|
|
|
|
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
|
|
{
|
|
#ifdef CONFIG_SMP
|
|
struct irq_data *d = irq_get_irq_data(irq);
|
|
cpumask_copy(irq_data_get_affinity_mask(d), cpumask_of(cpu));
|
|
#endif
|
|
|
|
return per_cpu(cpu_data, cpu).txn_addr;
|
|
}
|
|
|
|
|
|
unsigned long txn_alloc_addr(unsigned int virt_irq)
|
|
{
|
|
static int next_cpu = -1;
|
|
|
|
next_cpu++; /* assign to "next" CPU we want this bugger on */
|
|
|
|
/* validate entry */
|
|
while ((next_cpu < nr_cpu_ids) &&
|
|
(!per_cpu(cpu_data, next_cpu).txn_addr ||
|
|
!cpu_online(next_cpu)))
|
|
next_cpu++;
|
|
|
|
if (next_cpu >= nr_cpu_ids)
|
|
next_cpu = 0; /* nothing else, assign monarch */
|
|
|
|
return txn_affinity_addr(virt_irq, next_cpu);
|
|
}
|
|
|
|
|
|
unsigned int txn_alloc_data(unsigned int virt_irq)
|
|
{
|
|
return virt_irq - CPU_IRQ_BASE;
|
|
}
|
|
|
|
static inline int eirr_to_irq(unsigned long eirr)
|
|
{
|
|
int bit = fls_long(eirr);
|
|
return (BITS_PER_LONG - bit) + TIMER_IRQ;
|
|
}
|
|
|
|
#ifdef CONFIG_IRQSTACKS
|
|
/*
|
|
* IRQ STACK - used for irq handler
|
|
*/
|
|
#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */
|
|
|
|
union irq_stack_union {
|
|
unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
|
|
volatile unsigned int slock[4];
|
|
volatile unsigned int lock[1];
|
|
};
|
|
|
|
DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = {
|
|
.slock = { 1,1,1,1 },
|
|
};
|
|
#endif
|
|
|
|
|
|
int sysctl_panic_on_stackoverflow = 1;
|
|
|
|
static inline void stack_overflow_check(struct pt_regs *regs)
|
|
{
|
|
#ifdef CONFIG_DEBUG_STACKOVERFLOW
|
|
#define STACK_MARGIN (256*6)
|
|
|
|
/* Our stack starts directly behind the thread_info struct. */
|
|
unsigned long stack_start = (unsigned long) current_thread_info();
|
|
unsigned long sp = regs->gr[30];
|
|
unsigned long stack_usage;
|
|
unsigned int *last_usage;
|
|
int cpu = smp_processor_id();
|
|
|
|
/* if sr7 != 0, we interrupted a userspace process which we do not want
|
|
* to check for stack overflow. We will only check the kernel stack. */
|
|
if (regs->sr[7])
|
|
return;
|
|
|
|
/* calculate kernel stack usage */
|
|
stack_usage = sp - stack_start;
|
|
#ifdef CONFIG_IRQSTACKS
|
|
if (likely(stack_usage <= THREAD_SIZE))
|
|
goto check_kernel_stack; /* found kernel stack */
|
|
|
|
/* check irq stack usage */
|
|
stack_start = (unsigned long) &per_cpu(irq_stack_union, cpu).stack;
|
|
stack_usage = sp - stack_start;
|
|
|
|
last_usage = &per_cpu(irq_stat.irq_stack_usage, cpu);
|
|
if (unlikely(stack_usage > *last_usage))
|
|
*last_usage = stack_usage;
|
|
|
|
if (likely(stack_usage < (IRQ_STACK_SIZE - STACK_MARGIN)))
|
|
return;
|
|
|
|
pr_emerg("stackcheck: %s will most likely overflow irq stack "
|
|
"(sp:%lx, stk bottom-top:%lx-%lx)\n",
|
|
current->comm, sp, stack_start, stack_start + IRQ_STACK_SIZE);
|
|
goto panic_check;
|
|
|
|
check_kernel_stack:
|
|
#endif
|
|
|
|
/* check kernel stack usage */
|
|
last_usage = &per_cpu(irq_stat.kernel_stack_usage, cpu);
|
|
|
|
if (unlikely(stack_usage > *last_usage))
|
|
*last_usage = stack_usage;
|
|
|
|
if (likely(stack_usage < (THREAD_SIZE - STACK_MARGIN)))
|
|
return;
|
|
|
|
pr_emerg("stackcheck: %s will most likely overflow kernel stack "
|
|
"(sp:%lx, stk bottom-top:%lx-%lx)\n",
|
|
current->comm, sp, stack_start, stack_start + THREAD_SIZE);
|
|
|
|
#ifdef CONFIG_IRQSTACKS
|
|
panic_check:
|
|
#endif
|
|
if (sysctl_panic_on_stackoverflow)
|
|
panic("low stack detected by irq handler - check messages\n");
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_IRQSTACKS
|
|
/* in entry.S: */
|
|
void call_on_stack(unsigned long p1, void *func, unsigned long new_stack);
|
|
|
|
static void execute_on_irq_stack(void *func, unsigned long param1)
|
|
{
|
|
union irq_stack_union *union_ptr;
|
|
unsigned long irq_stack;
|
|
volatile unsigned int *irq_stack_in_use;
|
|
|
|
union_ptr = &per_cpu(irq_stack_union, smp_processor_id());
|
|
irq_stack = (unsigned long) &union_ptr->stack;
|
|
irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock),
|
|
64); /* align for stack frame usage */
|
|
|
|
/* We may be called recursive. If we are already using the irq stack,
|
|
* just continue to use it. Use spinlocks to serialize
|
|
* the irq stack usage.
|
|
*/
|
|
irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr);
|
|
if (!__ldcw(irq_stack_in_use)) {
|
|
void (*direct_call)(unsigned long p1) = func;
|
|
|
|
/* We are using the IRQ stack already.
|
|
* Do direct call on current stack. */
|
|
direct_call(param1);
|
|
return;
|
|
}
|
|
|
|
/* This is where we switch to the IRQ stack. */
|
|
call_on_stack(param1, func, irq_stack);
|
|
|
|
/* free up irq stack usage. */
|
|
*irq_stack_in_use = 1;
|
|
}
|
|
|
|
void do_softirq_own_stack(void)
|
|
{
|
|
execute_on_irq_stack(__do_softirq, 0);
|
|
}
|
|
#endif /* CONFIG_IRQSTACKS */
|
|
|
|
/* ONLY called from entry.S:intr_extint() */
|
|
void do_cpu_irq_mask(struct pt_regs *regs)
|
|
{
|
|
struct pt_regs *old_regs;
|
|
unsigned long eirr_val;
|
|
int irq, cpu = smp_processor_id();
|
|
struct irq_data *irq_data;
|
|
#ifdef CONFIG_SMP
|
|
cpumask_t dest;
|
|
#endif
|
|
|
|
old_regs = set_irq_regs(regs);
|
|
local_irq_disable();
|
|
irq_enter();
|
|
|
|
eirr_val = mfctl(23) & cpu_eiem & per_cpu(local_ack_eiem, cpu);
|
|
if (!eirr_val)
|
|
goto set_out;
|
|
irq = eirr_to_irq(eirr_val);
|
|
|
|
irq_data = irq_get_irq_data(irq);
|
|
|
|
/* Filter out spurious interrupts, mostly from serial port at bootup */
|
|
if (unlikely(!irq_desc_has_action(irq_data_to_desc(irq_data))))
|
|
goto set_out;
|
|
|
|
#ifdef CONFIG_SMP
|
|
cpumask_copy(&dest, irq_data_get_affinity_mask(irq_data));
|
|
if (irqd_is_per_cpu(irq_data) &&
|
|
!cpumask_test_cpu(smp_processor_id(), &dest)) {
|
|
int cpu = cpumask_first(&dest);
|
|
|
|
printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n",
|
|
irq, smp_processor_id(), cpu);
|
|
gsc_writel(irq + CPU_IRQ_BASE,
|
|
per_cpu(cpu_data, cpu).hpa);
|
|
goto set_out;
|
|
}
|
|
#endif
|
|
stack_overflow_check(regs);
|
|
|
|
#ifdef CONFIG_IRQSTACKS
|
|
execute_on_irq_stack(&generic_handle_irq, irq);
|
|
#else
|
|
generic_handle_irq(irq);
|
|
#endif /* CONFIG_IRQSTACKS */
|
|
|
|
out:
|
|
irq_exit();
|
|
set_irq_regs(old_regs);
|
|
return;
|
|
|
|
set_out:
|
|
set_eiem(cpu_eiem & per_cpu(local_ack_eiem, cpu));
|
|
goto out;
|
|
}
|
|
|
|
static struct irqaction timer_action = {
|
|
.handler = timer_interrupt,
|
|
.name = "timer",
|
|
.flags = IRQF_TIMER | IRQF_PERCPU | IRQF_IRQPOLL,
|
|
};
|
|
|
|
#ifdef CONFIG_SMP
|
|
static struct irqaction ipi_action = {
|
|
.handler = ipi_interrupt,
|
|
.name = "IPI",
|
|
.flags = IRQF_PERCPU,
|
|
};
|
|
#endif
|
|
|
|
static void claim_cpu_irqs(void)
|
|
{
|
|
int i;
|
|
for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
|
|
irq_set_chip_and_handler(i, &cpu_interrupt_type,
|
|
handle_percpu_irq);
|
|
}
|
|
|
|
irq_set_handler(TIMER_IRQ, handle_percpu_irq);
|
|
setup_irq(TIMER_IRQ, &timer_action);
|
|
#ifdef CONFIG_SMP
|
|
irq_set_handler(IPI_IRQ, handle_percpu_irq);
|
|
setup_irq(IPI_IRQ, &ipi_action);
|
|
#endif
|
|
}
|
|
|
|
void __init init_IRQ(void)
|
|
{
|
|
local_irq_disable(); /* PARANOID - should already be disabled */
|
|
mtctl(~0UL, 23); /* EIRR : clear all pending external intr */
|
|
#ifdef CONFIG_SMP
|
|
if (!cpu_eiem) {
|
|
claim_cpu_irqs();
|
|
cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ);
|
|
}
|
|
#else
|
|
claim_cpu_irqs();
|
|
cpu_eiem = EIEM_MASK(TIMER_IRQ);
|
|
#endif
|
|
set_eiem(cpu_eiem); /* EIEM : enable all external intr */
|
|
}
|