Simon Arlott 45145b67f5 [media] dvb-core: fix DVBFE_ALGO_HW retune bug ... Commit 7e07222 breaks DVBFE_ALGO_HW tuning after a retune is requested, which causes bad tuning on my TBS 6920. [ 0.769091] pci 0000:06:00.0: [14f1:8852] type 0 class 0x000400 [ 19.733530] CORE cx23885[0]: subsystem: 6920:8888, board: TurboSight TBS 6920 [card=14,autodetected] [ 762.824912] cx24116_load_firmware: FW version 1.23.86.1 7e0722215a [media] dvb-core: Don't pass DVBv3 parameters on tune() fops Although re_tune is set to true when FESTATE_RETUNE occurs, it is never set back to false which the old code used to do when !FESTATE_RETUNE. This patch sets re_tune to false if !(state & FESTATE_RETUNE). $ szap-s2 -a 2 "Channel 5" reading channels from file '/home/simon/.szap/channels.conf' zapping to 247 'Channel 5': delivery DVB-S, modulation QPSK sat 0, frequency 10964 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35 vpid 0x092a, apid 0x092b, sid 0x092d using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cec0 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cec0 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>		2012-02-14 17:15:25 -02:00
..
Makefile	[media] Make DVB NET configurable in the kernel	2011-07-27 17:52:20 -03:00
demux.h	…
dmxdev.c	…
dmxdev.h	…
dvb_ca_en50221.c	[media] dvb_ca_en50221: fix compilation breakage	2012-01-10 19:15:45 -02:00
dvb_ca_en50221.h	…
dvb_demux.c	…
dvb_demux.h	…
dvb_filter.c	…
dvb_filter.h	…
dvb_frontend.c	[media] dvb-core: fix DVBFE_ALGO_HW retune bug	2012-02-14 17:15:25 -02:00
dvb_frontend.h	[media] dvb-core: define general callback value for demodulator	2012-01-10 22:58:39 -02:00
dvb_math.c	…
dvb_math.h	…
dvb_net.c	[media] DVB: dvb_net_init: return -errno on error	2012-01-06 12:40:46 -02:00
dvb_net.h	dvb_net: Simplify the code if DVB NET is not defined	2011-07-27 17:52:20 -03:00
dvb_ringbuffer.c	…
dvb_ringbuffer.h	…
dvbdev.c	switch device_get_devnode() and ->devnode() to umode_t *	2012-01-03 22:54:55 -05:00
dvbdev.h	…