linux/Documentation/gpio
Linus Torvalds 980f3c344f This is the bulk of GPIO changes for the v3.19 series:
- A new API that allows setting more than one GPIO at the
   time. This is implemented for the new descriptor-based
   API only and makes it possible to e.g. toggle a clock and
   data line at the same time, if the hardware can do this
   with a single register write. Both consumers and drivers
   need new calls, and the core will fall back to driving
   individual lines where needed. Implemented for the MPC8xxx
   driver initially.
 - Patched the mdio-mux-gpio and the serial mctrl driver
   that drives modems to use the new multiple-setting API
   to set several signals simultaneously.
 - Get rid of the global GPIO descriptor array, and instead
   allocate descriptors dynamically for each GPIO on a certain
   GPIO chip. This moves us closer to getting rid of the
   limitation of using the global, static GPIO numberspace.
 - New driver and device tree bindings for 74xx ICs.
 - New driver and device tree bindings for the VF610 Vybrid.
 - Support the RCAR r8a7793 and r8a7794.
 - Guidelines for GPIO device tree bindings trying to get
   things a bit more strict with the advent of combined
   device properties.
 - Suspend/resume support for the MVEBU driver.
 - A slew of minor fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUjgQ7AAoJEEEQszewGV1zuJ8P+wamlDNhJbsgqXPcSCZZFgeP
 1O22VRYqoo/i8mAzNCRi2h6NogO9Da6rCRhHdH35TsuNzIbusHE+btMukj248qJ7
 WYOf25I0ImyUP8kulogW4/+7lYibRLHnN2BSLuAkApofmxDvODPS1KNWHulcOcxl
 VaVsA8wvFzQO1s1Wjv94ctVfs5rqk7mBfPwk61zHuLeETecmKg0e52p0Uzqlq6gi
 UKi9uK3sjQ7kI/+xa+qDrF9GRwRR22oJfD/9zNj8g94iU9iMs5Oh+Zp3RJcvYUSD
 y5BIb+IY2ATy20ZkijWmeP8LJz6pja+C9Ne7lKM0jkv7geGeHGAoavz0n3oUq4oz
 IvUNz6hCAP9PcxWc5a9FFqqORLWrRew6GmZmJvIkmC9K+3UQcWhkzO3vLpfl6Q9h
 S728XexkIlhxG9NcER21bFXV2dw3z/X9dm5mQ473TqJm+wQmRuYcPRg053NbqMcx
 juvkweCksx8qlpnjo/1QXQcVwFM8kuR7xAlVo7zdMDOU5F8pdxRnsTl0cUdx5cPv
 DKeMRg8+FYcHmIoe/EodemIh7cAZtEpijZNNAr9cDmAjifeBjWhCb+zri5SIc96x
 0jKVTXyY4jnHXBVoA0FIl1d2t54yVjh3PYiu0MjeLJ9tyB+Px/nOxW8FrdlFnPJ/
 oP5WK13c8h3bMkxUzsvL
 =ZAhA
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull take two of the GPIO updates:
 "Same stuff as last time, now with a fixup patch for the previous
  compile error plus I ran a few extra rounds of compile-testing.

  This is the bulk of GPIO changes for the v3.19 series:

   - A new API that allows setting more than one GPIO at the time.  This
     is implemented for the new descriptor-based API only and makes it
     possible to e.g. toggle a clock and data line at the same time, if
     the hardware can do this with a single register write.  Both
     consumers and drivers need new calls, and the core will fall back
     to driving individual lines where needed.  Implemented for the
     MPC8xxx driver initially

   - Patched the mdio-mux-gpio and the serial mctrl driver that drives
     modems to use the new multiple-setting API to set several signals
     simultaneously

   - Get rid of the global GPIO descriptor array, and instead allocate
     descriptors dynamically for each GPIO on a certain GPIO chip.  This
     moves us closer to getting rid of the limitation of using the
     global, static GPIO numberspace

   - New driver and device tree bindings for 74xx ICs

   - New driver and device tree bindings for the VF610 Vybrid

   - Support the RCAR r8a7793 and r8a7794

   - Guidelines for GPIO device tree bindings trying to get things a bit
     more strict with the advent of combined device properties

   - Suspend/resume support for the MVEBU driver

   - A slew of minor fixes and improvements"

* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
  gpio: mcp23s08: fix up compilation error
  gpio: pl061: document gpio-ranges property for bindings file
  gpio: pl061: hook request if gpio-ranges avaiable
  gpio: mcp23s08: Add option to configure IRQ output polarity as active high
  gpio: fix deferred probe detection for legacy API
  serial: mctrl_gpio: use gpiod_set_array function
  mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
  gpio: remove const modifier from gpiod_get_direction()
  gpio: remove gpio_descs global array
  gpio: mxs: implement get_direction callback
  gpio: em: Use dynamic allocation of GPIOs
  gpio: Check if base is positive before calling gpio_is_valid()
  gpio: mcp23s08: Add simple IRQ support for SPI devices
  gpio: mcp23s08: request a shared interrupt
  gpio: mcp23s08: Do not free unrequested interrupt
  gpio: rcar: Add r8a7793 and r8a7794 support
  gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
  gpiolib: allow simultaneous setting of multiple GPIO outputs
  gpio: mvebu: add suspend/resume support
  gpio: gpio-davinci: remove duplicate check on resource
  ..
2014-12-14 14:05:05 -08:00
..
00-INDEX Documentation: gpiolib: add 00-INDEX file 2013-12-03 13:10:48 +01:00
board.txt gpio: split gpiod board registration into machine header 2014-07-28 12:23:35 +02:00
consumer.txt This is the bulk of GPIO changes for the v3.19 series: 2014-12-14 14:05:05 -08:00
driver.txt gpio: rename gpio_lock_as_irq to gpiochip_lock_as_irq 2014-10-28 17:30:59 +01:00
gpio-legacy.txt Documentation: gpiolib: document new interface 2013-11-25 09:02:30 +01:00
gpio.txt Documentation: gpiolib: document new interface 2013-11-25 09:02:30 +01:00
sysfs.txt Documentation: gpiolib: document new interface 2013-11-25 09:02:30 +01:00