linux/arch/arm/boot/dts/kirkwood-sheevaplug-common....

110 lines
1.9 KiB
Plaintext

/*
* kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*
* Licensed under GPLv2
*/
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_red: pmx-led-red {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_blue: pmx-led-blue {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_sdio_wp: pmx-sdio-wp {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "okay";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 0>;
};
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x0500000 0x1fb00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};