linux/arch/arm64/include/asm/mmu_context.h
Suzuki K Poulose 13f417f3b8 arm64: Ensure the secondary CPUs have safe ASIDBits size
Adds a hook for checking whether a secondary CPU has the
features used already by the kernel during early boot, based
on the boot CPU and plugs in the check for ASID size.

The ID_AA64MMFR0_EL1:ASIDBits determines the size of the mm context
id and is used in the early boot to make decisions. The value is
picked up from the Boot CPU and cannot be delayed until other CPUs
are up. If a secondary CPU has a smaller size than that of the Boot
CPU, things will break horribly and the usual SANITY check is not good
enough to prevent the system from crashing. So, crash the system with
enough information.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-25 10:33:06 +00:00

209 lines
5.5 KiB
C

/*
* Based on arch/arm/include/asm/mmu_context.h
*
* Copyright (C) 1996 Russell King.
* Copyright (C) 2012 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASM_MMU_CONTEXT_H
#define __ASM_MMU_CONTEXT_H
#include <linux/compiler.h>
#include <linux/sched.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#include <asm-generic/mm_hooks.h>
#include <asm/cputype.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_PID_IN_CONTEXTIDR
static inline void contextidr_thread_switch(struct task_struct *next)
{
asm(
" msr contextidr_el1, %0\n"
" isb"
:
: "r" (task_pid_nr(next)));
}
#else
static inline void contextidr_thread_switch(struct task_struct *next)
{
}
#endif
/*
* Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0.
*/
static inline void cpu_set_reserved_ttbr0(void)
{
unsigned long ttbr = virt_to_phys(empty_zero_page);
asm(
" msr ttbr0_el1, %0 // set TTBR0\n"
" isb"
:
: "r" (ttbr));
}
/*
* TCR.T0SZ value to use when the ID map is active. Usually equals
* TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in
* physical memory, in which case it will be smaller.
*/
extern u64 idmap_t0sz;
static inline bool __cpu_uses_extended_idmap(void)
{
return (!IS_ENABLED(CONFIG_ARM64_VA_BITS_48) &&
unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS)));
}
/*
* Set TCR.T0SZ to its default value (based on VA_BITS)
*/
static inline void __cpu_set_tcr_t0sz(unsigned long t0sz)
{
unsigned long tcr;
if (!__cpu_uses_extended_idmap())
return;
asm volatile (
" mrs %0, tcr_el1 ;"
" bfi %0, %1, %2, %3 ;"
" msr tcr_el1, %0 ;"
" isb"
: "=&r" (tcr)
: "r"(t0sz), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
}
#define cpu_set_default_tcr_t0sz() __cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS))
#define cpu_set_idmap_tcr_t0sz() __cpu_set_tcr_t0sz(idmap_t0sz)
/*
* Remove the idmap from TTBR0_EL1 and install the pgd of the active mm.
*
* The idmap lives in the same VA range as userspace, but uses global entries
* and may use a different TCR_EL1.T0SZ. To avoid issues resulting from
* speculative TLB fetches, we must temporarily install the reserved page
* tables while we invalidate the TLBs and set up the correct TCR_EL1.T0SZ.
*
* If current is a not a user task, the mm covers the TTBR1_EL1 page tables,
* which should not be installed in TTBR0_EL1. In this case we can leave the
* reserved page tables in place.
*/
static inline void cpu_uninstall_idmap(void)
{
struct mm_struct *mm = current->active_mm;
cpu_set_reserved_ttbr0();
local_flush_tlb_all();
cpu_set_default_tcr_t0sz();
if (mm != &init_mm)
cpu_switch_mm(mm->pgd, mm);
}
static inline void cpu_install_idmap(void)
{
cpu_set_reserved_ttbr0();
local_flush_tlb_all();
cpu_set_idmap_tcr_t0sz();
cpu_switch_mm(idmap_pg_dir, &init_mm);
}
/*
* Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
* avoiding the possibility of conflicting TLB entries being allocated.
*/
static inline void cpu_replace_ttbr1(pgd_t *pgd)
{
typedef void (ttbr_replace_func)(phys_addr_t);
extern ttbr_replace_func idmap_cpu_replace_ttbr1;
ttbr_replace_func *replace_phys;
phys_addr_t pgd_phys = virt_to_phys(pgd);
replace_phys = (void *)virt_to_phys(idmap_cpu_replace_ttbr1);
cpu_install_idmap();
replace_phys(pgd_phys);
cpu_uninstall_idmap();
}
/*
* It would be nice to return ASIDs back to the allocator, but unfortunately
* that introduces a race with a generation rollover where we could erroneously
* free an ASID allocated in a future generation. We could workaround this by
* freeing the ASID from the context of the dying mm (e.g. in arch_exit_mmap),
* but we'd then need to make sure that we didn't dirty any TLBs afterwards.
* Setting a reserved TTBR0 or EPD0 would work, but it all gets ugly when you
* take CPU migration into account.
*/
#define destroy_context(mm) do { } while(0)
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.
*
* mm: describes the currently active mm context
* tsk: task which is entering lazy tlb
* cpu: cpu number which is entering lazy tlb
*
* tsk->mm will be NULL
*/
static inline void
enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
/*
* This is the actual mm switch as far as the scheduler
* is concerned. No registers are touched. We avoid
* calling the CPU specific function when the mm hasn't
* actually changed.
*/
static inline void
switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned int cpu = smp_processor_id();
if (prev == next)
return;
/*
* init_mm.pgd does not contain any user mappings and it is always
* active for kernel addresses in TTBR1. Just set the reserved TTBR0.
*/
if (next == &init_mm) {
cpu_set_reserved_ttbr0();
return;
}
check_and_switch_context(next, cpu);
}
#define deactivate_mm(tsk,mm) do { } while (0)
#define activate_mm(prev,next) switch_mm(prev, next, NULL)
void verify_cpu_asid_bits(void);
#endif