linux/drivers/pci/pci.c

4457 lines
115 KiB
C

/*
* PCI Bus Services, see include/linux/pci.h for further explanation.
*
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
* David Mosberger-Tang
*
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/log2.h>
#include <linux/pci-aspm.h>
#include <linux/pm_wakeup.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pci_hotplug.h>
#include <asm-generic/pci-bridge.h>
#include <asm/setup.h>
#include "pci.h"
const char *pci_power_names[] = {
"error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
};
EXPORT_SYMBOL_GPL(pci_power_names);
int isa_dma_bridge_buggy;
EXPORT_SYMBOL(isa_dma_bridge_buggy);
int pci_pci_problems;
EXPORT_SYMBOL(pci_pci_problems);
unsigned int pci_pm_d3_delay;
static void pci_pme_list_scan(struct work_struct *work);
static LIST_HEAD(pci_pme_list);
static DEFINE_MUTEX(pci_pme_list_mutex);
static DECLARE_DELAYED_WORK(pci_pme_work, pci_pme_list_scan);
struct pci_pme_device {
struct list_head list;
struct pci_dev *dev;
};
#define PME_TIMEOUT 1000 /* How long between PME checks */
static void pci_dev_d3_sleep(struct pci_dev *dev)
{
unsigned int delay = dev->d3_delay;
if (delay < pci_pm_d3_delay)
delay = pci_pm_d3_delay;
msleep(delay);
}
#ifdef CONFIG_PCI_DOMAINS
int pci_domains_supported = 1;
#endif
#define DEFAULT_CARDBUS_IO_SIZE (256)
#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
/* pci=cbmemsize=nnM,cbiosize=nn can override this */
unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
#define DEFAULT_HOTPLUG_IO_SIZE (256)
#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
/* pci=hpmemsize=nnM,hpiosize=nn can override this */
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
/*
* The default CLS is used if arch didn't set CLS explicitly and not
* all pci devices agree on the same value. Arch can override either
* the dfl or actual value as it sees fit. Don't forget this is
* measured in 32-bit words, not bytes.
*/
u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2;
u8 pci_cache_line_size;
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain BIOSes forget to set it properly.
*/
unsigned int pcibios_max_latency = 255;
/* If set, the PCIe ARI capability will not be used. */
static bool pcie_ari_disabled;
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
*
* Given a PCI bus, returns the highest PCI bus number present in the set
* including the given PCI bus and its list of child PCI buses.
*/
unsigned char pci_bus_max_busnr(struct pci_bus* bus)
{
struct list_head *tmp;
unsigned char max, n;
max = bus->busn_res.end;
list_for_each(tmp, &bus->children) {
n = pci_bus_max_busnr(pci_bus_b(tmp));
if(n > max)
max = n;
}
return max;
}
EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
#ifdef CONFIG_HAS_IOMEM
void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
{
/*
* Make sure the BAR is actually a memory resource, not an IO resource
*/
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
WARN_ON(1);
return NULL;
}
return ioremap_nocache(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
}
EXPORT_SYMBOL_GPL(pci_ioremap_bar);
#endif
#define PCI_FIND_CAP_TTL 48
static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
u8 pos, int cap, int *ttl)
{
u8 id;
while ((*ttl)--) {
pci_bus_read_config_byte(bus, devfn, pos, &pos);
if (pos < 0x40)
break;
pos &= ~3;
pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID,
&id);
if (id == 0xff)
break;
if (id == cap)
return pos;
pos += PCI_CAP_LIST_NEXT;
}
return 0;
}
static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
u8 pos, int cap)
{
int ttl = PCI_FIND_CAP_TTL;
return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
}
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
{
return __pci_find_next_cap(dev->bus, dev->devfn,
pos + PCI_CAP_LIST_NEXT, cap);
}
EXPORT_SYMBOL_GPL(pci_find_next_capability);
static int __pci_bus_find_cap_start(struct pci_bus *bus,
unsigned int devfn, u8 hdr_type)
{
u16 status;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
return 0;
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
return PCI_CAPABILITY_LIST;
case PCI_HEADER_TYPE_CARDBUS:
return PCI_CB_CAPABILITY_LIST;
default:
return 0;
}
return 0;
}
/**
* pci_find_capability - query for devices' capabilities
* @dev: PCI device to query
* @cap: capability code
*
* Tell if a device supports a given PCI capability.
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
* support it. Possible values for @cap:
*
* %PCI_CAP_ID_PM Power Management
* %PCI_CAP_ID_AGP Accelerated Graphics Port
* %PCI_CAP_ID_VPD Vital Product Data
* %PCI_CAP_ID_SLOTID Slot Identification
* %PCI_CAP_ID_MSI Message Signalled Interrupts
* %PCI_CAP_ID_CHSWP CompactPCI HotSwap
* %PCI_CAP_ID_PCIX PCI-X
* %PCI_CAP_ID_EXP PCI Express
*/
int pci_find_capability(struct pci_dev *dev, int cap)
{
int pos;
pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
if (pos)
pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
return pos;
}
/**
* pci_bus_find_capability - query for devices' capabilities
* @bus: the PCI bus to query
* @devfn: PCI device to query
* @cap: capability code
*
* Like pci_find_capability() but works for pci devices that do not have a
* pci_dev structure set up yet.
*
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
* support it.
*/
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
{
int pos;
u8 hdr_type;
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
if (pos)
pos = __pci_find_next_cap(bus, devfn, pos, cap);
return pos;
}
/**
* pci_find_next_ext_capability - Find an extended capability
* @dev: PCI device to query
* @start: address at which to start looking (0 to start at beginning of list)
* @cap: capability code
*
* Returns the address of the next matching extended capability structure
* within the device's PCI configuration space or 0 if the device does
* not support it. Some capabilities can occur several times, e.g., the
* vendor-specific capability, and this provides a way to find them all.
*/
int pci_find_next_ext_capability(struct pci_dev *dev, int start, int cap)
{
u32 header;
int ttl;
int pos = PCI_CFG_SPACE_SIZE;
/* minimum 8 bytes per capability */
ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
if (dev->cfg_size <= PCI_CFG_SPACE_SIZE)
return 0;
if (start)
pos = start;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
return 0;
/*
* If we have no capabilities, this is indicated by cap ID,
* cap version and next pointer all being 0.
*/
if (header == 0)
return 0;
while (ttl-- > 0) {
if (PCI_EXT_CAP_ID(header) == cap && pos != start)
return pos;
pos = PCI_EXT_CAP_NEXT(header);
if (pos < PCI_CFG_SPACE_SIZE)
break;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(pci_find_next_ext_capability);
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
* @cap: capability code
*
* Returns the address of the requested extended capability structure
* within the device's PCI configuration space or 0 if the device does
* not support it. Possible values for @cap:
*
* %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
* %PCI_EXT_CAP_ID_VC Virtual Channel
* %PCI_EXT_CAP_ID_DSN Device Serial Number
* %PCI_EXT_CAP_ID_PWR Power Budgeting
*/
int pci_find_ext_capability(struct pci_dev *dev, int cap)
{
return pci_find_next_ext_capability(dev, 0, cap);
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
{
int rc, ttl = PCI_FIND_CAP_TTL;
u8 cap, mask;
if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
mask = HT_3BIT_CAP_MASK;
else
mask = HT_5BIT_CAP_MASK;
pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
PCI_CAP_ID_HT, &ttl);
while (pos) {
rc = pci_read_config_byte(dev, pos + 3, &cap);
if (rc != PCIBIOS_SUCCESSFUL)
return 0;
if ((cap & mask) == ht_cap)
return pos;
pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
pos + PCI_CAP_LIST_NEXT,
PCI_CAP_ID_HT, &ttl);
}
return 0;
}
/**
* pci_find_next_ht_capability - query a device's Hypertransport capabilities
* @dev: PCI device to query
* @pos: Position from which to continue searching
* @ht_cap: Hypertransport capability code
*
* To be used in conjunction with pci_find_ht_capability() to search for
* all capabilities matching @ht_cap. @pos should always be a value returned
* from pci_find_ht_capability().
*
* NB. To be 100% safe against broken PCI devices, the caller should take
* steps to avoid an infinite loop.
*/
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
{
return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
}
EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
/**
* pci_find_ht_capability - query a device's Hypertransport capabilities
* @dev: PCI device to query
* @ht_cap: Hypertransport capability code
*
* Tell if a device supports a given Hypertransport capability.
* Returns an address within the device's PCI configuration space
* or 0 in case the device does not support the request capability.
* The address points to the PCI capability, of type PCI_CAP_ID_HT,
* which has a Hypertransport capability matching @ht_cap.
*/
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
{
int pos;
pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
if (pos)
pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
return pos;
}
EXPORT_SYMBOL_GPL(pci_find_ht_capability);
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
* @res: child resource record for which parent is sought
*
* For given resource region of given device, return the resource
* region of parent bus the given region is contained in or where
* it should be allocated from.
*/
struct resource *
pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
{
const struct pci_bus *bus = dev->bus;
int i;
struct resource *best = NULL, *r;
pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
if (res->start && !(res->start >= r->start && res->end <= r->end))
continue; /* Not contained */
if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
continue; /* Wrong type */
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
return r; /* Exact match */
/* We can't insert a non-prefetch resource inside a prefetchable parent .. */
if (r->flags & IORESOURCE_PREFETCH)
continue;
/* .. but we can put a prefetchable resource inside a non-prefetchable one */
if (!best)
best = r;
}
return best;
}
/**
* pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
* @dev: PCI device to have its BARs restored
*
* Restore the BAR values for a given device, so as to make it
* accessible by its driver.
*/
static void
pci_restore_bars(struct pci_dev *dev)
{
int i;
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
pci_update_resource(dev, i);
}
static struct pci_platform_pm_ops *pci_platform_pm;
int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
{
if (!ops->is_manageable || !ops->set_state || !ops->choose_state
|| !ops->sleep_wake)
return -EINVAL;
pci_platform_pm = ops;
return 0;
}
static inline bool platform_pci_power_manageable(struct pci_dev *dev)
{
return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
}
static inline int platform_pci_set_power_state(struct pci_dev *dev,
pci_power_t t)
{
return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
}
static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
{
return pci_platform_pm ?
pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
}
static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
{
return pci_platform_pm ?
pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
}
static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
{
return pci_platform_pm ?
pci_platform_pm->run_wake(dev, enable) : -ENODEV;
}
/**
* pci_raw_set_power_state - Use PCI PM registers to set the power state of
* given PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
* -EIO if device does not support PCI PM or its PM capabilities register has a
* wrong version, or device doesn't support the requested state.
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
u16 pmcsr;
bool need_restore = false;
/* Check if we're already there */
if (dev->current_state == state)
return 0;
if (!dev->pm_cap)
return -EIO;
if (state < PCI_D0 || state > PCI_D3hot)
return -EINVAL;
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
dev_err(&dev->dev, "invalid power transition "
"(from state %d to %d)\n", dev->current_state, state);
return -EINVAL;
}
/* check if this device supports the desired state */
if ((state == PCI_D1 && !dev->d1_support)
|| (state == PCI_D2 && !dev->d2_support))
return -EIO;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
/* If we're (effectively) in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
* sets PowerState to 0.
*/
switch (dev->current_state) {
case PCI_D0:
case PCI_D1:
case PCI_D2:
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
break;
case PCI_D3hot:
case PCI_D3cold:
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = true;
/* Fall-through: force to D0 */
default:
pmcsr = 0;
break;
}
/* enter specified state */
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
pci_dev_d3_sleep(dev);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
if (dev->current_state != state && printk_ratelimit())
dev_info(&dev->dev, "Refused to change power state, "
"currently in D%d\n", dev->current_state);
/*
* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
* from D3hot to D0 _may_ perform an internal reset, thereby
* going to "D0 Uninitialized" rather than "D0 Initialized".
* For example, at least some versions of the 3c905B and the
* 3c556B exhibit this behaviour.
*
* At least some laptop BIOSen (e.g. the Thinkpad T21) leave
* devices in a D3hot state at boot. Consequently, we need to
* restore at least the BARs so that the device will be
* accessible to its driver.
*/
if (need_restore)
pci_restore_bars(dev);
if (dev->bus->self)
pcie_aspm_pm_state_change(dev->bus->self);
return 0;
}
/**
* pci_update_current_state - Read PCI power state of given device from its
* PCI PM registers and cache it
* @dev: PCI device to handle.
* @state: State to cache in case the device doesn't have the PM capability
*/
void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
{
if (dev->pm_cap) {
u16 pmcsr;
/*
* Configuration space is not accessible for device in
* D3cold, so just keep or set D3cold for safety
*/
if (dev->current_state == PCI_D3cold)
return;
if (state == PCI_D3cold) {
dev->current_state = PCI_D3cold;
return;
}
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
} else {
dev->current_state = state;
}
}
/**
* pci_power_up - Put the given device into D0 forcibly
* @dev: PCI device to power up
*/
void pci_power_up(struct pci_dev *dev)
{
if (platform_pci_power_manageable(dev))
platform_pci_set_power_state(dev, PCI_D0);
pci_raw_set_power_state(dev, PCI_D0);
pci_update_current_state(dev, PCI_D0);
}
/**
* pci_platform_power_transition - Use platform to change device power state
* @dev: PCI device to handle.
* @state: State to put the device into.
*/
static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
{
int error;
if (platform_pci_power_manageable(dev)) {
error = platform_pci_set_power_state(dev, state);
if (!error)
pci_update_current_state(dev, state);
} else
error = -ENODEV;
if (error && !dev->pm_cap) /* Fall back to PCI_D0 */
dev->current_state = PCI_D0;
return error;
}
/**
* __pci_start_power_transition - Start power transition of a PCI device
* @dev: PCI device to handle.
* @state: State to put the device into.
*/
static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
{
if (state == PCI_D0) {
pci_platform_power_transition(dev, PCI_D0);
/*
* Mandatory power management transition delays, see
* PCI Express Base Specification Revision 2.0 Section
* 6.6.1: Conventional Reset. Do not delay for
* devices powered on/off by corresponding bridge,
* because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
* whole hierarchy may be powered on into
* D0uninitialized state, resume them to give
* them a chance to suspend again
*/
pci_wakeup_bus(dev->subordinate);
}
}
}
/**
* __pci_dev_set_current_state - Set current state of a PCI device
* @dev: Device to handle
* @data: pointer to state to be set
*/
static int __pci_dev_set_current_state(struct pci_dev *dev, void *data)
{
pci_power_t state = *(pci_power_t *)data;
dev->current_state = state;
return 0;
}
/**
* __pci_bus_set_current_state - Walk given bus and set current state of devices
* @bus: Top bus of the subtree to walk.
* @state: state to be set
*/
static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
{
if (bus)
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
/**
* __pci_complete_power_transition - Complete power transition of a PCI device
* @dev: PCI device to handle.
* @state: State to put the device into.
*
* This function should not be called directly by device drivers.
*/
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
{
int ret;
if (state <= PCI_D0)
return -EINVAL;
ret = pci_platform_power_transition(dev, state);
/* Power off the bridge may power off the whole hierarchy */
if (!ret && state == PCI_D3cold)
__pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
return ret;
}
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
* Transition a device to a new power state, using the platform firmware and/or
* the device's PCI PM registers.
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
* -EIO if device does not support PCI PM or its PM capabilities register has a
* wrong version, or device doesn't support the requested state.
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
int error;
/* bound the state we're entering */
if (state > PCI_D3cold)
state = PCI_D3cold;
else if (state < PCI_D0)
state = PCI_D0;
else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
/*
* If the device or the parent bridge do not support PCI PM,
* ignore the request if we're doing anything other than putting
* it into D0 (which would only happen on boot).
*/
return 0;
/* Check if we're already there */
if (dev->current_state == state)
return 0;
__pci_start_power_transition(dev, state);
/* This device is quirked not to be put into D3, so
don't put it in D3 */
if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
/*
* To put device in D3cold, we put device into D3hot in native
* way, then put device into D3cold with platform ops
*/
error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
PCI_D3hot : state);
if (!__pci_complete_power_transition(dev, state))
error = 0;
/*
* When aspm_policy is "powersave" this call ensures
* that ASPM is configured.
*/
if (!error && dev->bus->self)
pcie_aspm_powersave_config_link(dev->bus->self);
return error;
}
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
* @state: target sleep state for the whole system. This is the value
* that is passed to suspend() function.
*
* Returns PCI power state suitable for given device and given system
* message.
*/
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
pci_power_t ret;
if (!dev->pm_cap)
return PCI_D0;
ret = platform_pci_choose_state(dev);
if (ret != PCI_POWER_ERROR)
return ret;
switch (state.event) {
case PM_EVENT_ON:
return PCI_D0;
case PM_EVENT_FREEZE:
case PM_EVENT_PRETHAW:
/* REVISIT both freeze and pre-thaw "should" use D0 */
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
return PCI_D3hot;
default:
dev_info(&dev->dev, "unrecognized suspend event %d\n",
state.event);
BUG();
}
return PCI_D0;
}
EXPORT_SYMBOL(pci_choose_state);
#define PCI_EXP_SAVE_REGS 7
static struct pci_cap_saved_state *pci_find_saved_cap(
struct pci_dev *pci_dev, char cap)
{
struct pci_cap_saved_state *tmp;
hlist_for_each_entry(tmp, &pci_dev->saved_cap_space, next) {
if (tmp->cap.cap_nr == cap)
return tmp;
}
return NULL;
}
static int pci_save_pcie_state(struct pci_dev *dev)
{
int i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
if (!pci_is_pcie(dev))
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
if (!save_state) {
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
cap = (u16 *)&save_state->cap.data[0];
pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_RTCTL, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &cap[i++]);
pcie_capability_read_word(dev, PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
static void pci_restore_pcie_state(struct pci_dev *dev)
{
int i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
if (!save_state)
return;
cap = (u16 *)&save_state->cap.data[0];
pcie_capability_write_word(dev, PCI_EXP_DEVCTL, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_LNKCTL, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_SLTCTL, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_RTCTL, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, cap[i++]);
pcie_capability_write_word(dev, PCI_EXP_SLTCTL2, cap[i++]);
}
static int pci_save_pcix_state(struct pci_dev *dev)
{
int pos;
struct pci_cap_saved_state *save_state;
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (pos <= 0)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
if (!save_state) {
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
pci_read_config_word(dev, pos + PCI_X_CMD,
(u16 *)save_state->cap.data);
return 0;
}
static void pci_restore_pcix_state(struct pci_dev *dev)
{
int i = 0, pos;
struct pci_cap_saved_state *save_state;
u16 *cap;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!save_state || pos <= 0)
return;
cap = (u16 *)&save_state->cap.data[0];
pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
}
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
*/
int
pci_save_state(struct pci_dev *dev)
{
int i;
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
dev->state_saved = true;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
return i;
return 0;
}
static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
u32 saved_val, int retry)
{
u32 val;
pci_read_config_dword(pdev, offset, &val);
if (val == saved_val)
return;
for (;;) {
dev_dbg(&pdev->dev, "restoring config space at offset "
"%#x (was %#x, writing %#x)\n", offset, val, saved_val);
pci_write_config_dword(pdev, offset, saved_val);
if (retry-- <= 0)
return;
pci_read_config_dword(pdev, offset, &val);
if (val == saved_val)
return;
mdelay(1);
}
}
static void pci_restore_config_space_range(struct pci_dev *pdev,
int start, int end, int retry)
{
int index;
for (index = end; index >= start; index--)
pci_restore_config_dword(pdev, 4 * index,
pdev->saved_config_space[index],
retry);
}
static void pci_restore_config_space(struct pci_dev *pdev)
{
if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
pci_restore_config_space_range(pdev, 10, 15, 0);
/* Restore BARs before the command register. */
pci_restore_config_space_range(pdev, 4, 9, 10);
pci_restore_config_space_range(pdev, 0, 3, 0);
} else {
pci_restore_config_space_range(pdev, 0, 15, 0);
}
}
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
*/
void pci_restore_state(struct pci_dev *dev)
{
if (!dev->state_saved)
return;
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
pci_restore_ats_state(dev);
pci_restore_config_space(dev);
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
pci_restore_iov_state(dev);
dev->state_saved = false;
}
struct pci_saved_state {
u32 config_space[16];
struct pci_cap_saved_data cap[0];
};
/**
* pci_store_saved_state - Allocate and return an opaque struct containing
* the device saved state.
* @dev: PCI device that we're dealing with
*
* Return NULL if no state or error.
*/
struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
{
struct pci_saved_state *state;
struct pci_cap_saved_state *tmp;
struct pci_cap_saved_data *cap;
size_t size;
if (!dev->state_saved)
return NULL;
size = sizeof(*state) + sizeof(struct pci_cap_saved_data);
hlist_for_each_entry(tmp, &dev->saved_cap_space, next)
size += sizeof(struct pci_cap_saved_data) + tmp->cap.size;
state = kzalloc(size, GFP_KERNEL);
if (!state)
return NULL;
memcpy(state->config_space, dev->saved_config_space,
sizeof(state->config_space));
cap = state->cap;
hlist_for_each_entry(tmp, &dev->saved_cap_space, next) {
size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size;
memcpy(cap, &tmp->cap, len);
cap = (struct pci_cap_saved_data *)((u8 *)cap + len);
}
/* Empty cap_save terminates list */
return state;
}
EXPORT_SYMBOL_GPL(pci_store_saved_state);
/**
* pci_load_saved_state - Reload the provided save state into struct pci_dev.
* @dev: PCI device that we're dealing with
* @state: Saved state returned from pci_store_saved_state()
*/
int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state)
{
struct pci_cap_saved_data *cap;
dev->state_saved = false;
if (!state)
return 0;
memcpy(dev->saved_config_space, state->config_space,
sizeof(state->config_space));
cap = state->cap;
while (cap->size) {
struct pci_cap_saved_state *tmp;
tmp = pci_find_saved_cap(dev, cap->cap_nr);
if (!tmp || tmp->cap.size != cap->size)
return -EINVAL;
memcpy(tmp->cap.data, cap->data, tmp->cap.size);
cap = (struct pci_cap_saved_data *)((u8 *)cap +
sizeof(struct pci_cap_saved_data) + cap->size);
}
dev->state_saved = true;
return 0;
}
EXPORT_SYMBOL_GPL(pci_load_saved_state);
/**
* pci_load_and_free_saved_state - Reload the save state pointed to by state,
* and free the memory allocated for it.
* @dev: PCI device that we're dealing with
* @state: Pointer to saved state returned from pci_store_saved_state()
*/
int pci_load_and_free_saved_state(struct pci_dev *dev,
struct pci_saved_state **state)
{
int ret = pci_load_saved_state(dev, *state);
kfree(*state);
*state = NULL;
return ret;
}
EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
err = pci_set_power_state(dev, PCI_D0);
if (err < 0 && err != -EIO)
return err;
err = pcibios_enable_device(dev, bars);
if (err < 0)
return err;
pci_fixup_device(pci_fixup_enable, dev);
return 0;
}
/**
* pci_reenable_device - Resume abandoned device
* @dev: PCI device to be resumed
*
* Note this function is a backend of pci_default_resume and is not supposed
* to be called by normal code, write proper resume handler and use it instead.
*/
int pci_reenable_device(struct pci_dev *dev)
{
if (pci_is_enabled(dev))
return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
return 0;
}
static void pci_enable_bridge(struct pci_dev *dev)
{
struct pci_dev *bridge;
int retval;
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_enable_bridge(bridge);
if (pci_is_enabled(dev)) {
if (!dev->is_busmaster)
pci_set_master(dev);
return;
}
retval = pci_enable_device(dev);
if (retval)
dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n",
retval);
pci_set_master(dev);
}
static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
{
struct pci_dev *bridge;
int err;
int i, bars = 0;
/*
* Power state could be unknown at this point, either due to a fresh
* boot or a device removal call. So get the current power state
* so that things like MSI message writing will behave as expected
* (e.g. if the device really is in D0 at enable time).
*/
if (dev->pm_cap) {
u16 pmcsr;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
}
if (atomic_inc_return(&dev->enable_cnt) > 1)
return 0; /* already enabled */
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_enable_bridge(bridge);
/* only skip sriov related */
for (i = 0; i <= PCI_ROM_RESOURCE; i++)
if (dev->resource[i].flags & flags)
bars |= (1 << i);
for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++)
if (dev->resource[i].flags & flags)
bars |= (1 << i);
err = do_pci_enable_device(dev, bars);
if (err < 0)
atomic_dec(&dev->enable_cnt);
return err;
}
/**
* pci_enable_device_io - Initialize a device for use with IO space
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable I/O resources. Wake up the device if it was suspended.
* Beware, this function can fail.
*/
int pci_enable_device_io(struct pci_dev *dev)
{
return pci_enable_device_flags(dev, IORESOURCE_IO);
}
/**
* pci_enable_device_mem - Initialize a device for use with Memory space
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable Memory resources. Wake up the device if it was suspended.
* Beware, this function can fail.
*/
int pci_enable_device_mem(struct pci_dev *dev)
{
return pci_enable_device_flags(dev, IORESOURCE_MEM);
}
/**
* pci_enable_device - Initialize device before it's used by a driver.
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable I/O and memory. Wake up the device if it was suspended.
* Beware, this function can fail.
*
* Note we don't actually enable the device many times if we call
* this function repeatedly (we just increment the count).
*/
int pci_enable_device(struct pci_dev *dev)
{
return pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO);
}
/*
* Managed PCI resources. This manages device on/off, intx/msi/msix
* on/off and BAR regions. pci_dev itself records msi/msix status, so
* there's no need to track it separately. pci_devres is initialized
* when a device is enabled using managed PCI device enable interface.
*/
struct pci_devres {
unsigned int enabled:1;
unsigned int pinned:1;
unsigned int orig_intx:1;
unsigned int restore_intx:1;
u32 region_mask;
};
static void pcim_release(struct device *gendev, void *res)
{
struct pci_dev *dev = container_of(gendev, struct pci_dev, dev);
struct pci_devres *this = res;
int i;
if (dev->msi_enabled)
pci_disable_msi(dev);
if (dev->msix_enabled)
pci_disable_msix(dev);
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
if (this->region_mask & (1 << i))
pci_release_region(dev, i);
if (this->restore_intx)
pci_intx(dev, this->orig_intx);
if (this->enabled && !this->pinned)
pci_disable_device(dev);
}
static struct pci_devres * get_pci_dr(struct pci_dev *pdev)
{
struct pci_devres *dr, *new_dr;
dr = devres_find(&pdev->dev, pcim_release, NULL, NULL);
if (dr)
return dr;
new_dr = devres_alloc(pcim_release, sizeof(*new_dr), GFP_KERNEL);
if (!new_dr)
return NULL;
return devres_get(&pdev->dev, new_dr, NULL, NULL);
}
static struct pci_devres * find_pci_dr(struct pci_dev *pdev)
{
if (pci_is_managed(pdev))
return devres_find(&pdev->dev, pcim_release, NULL, NULL);
return NULL;
}
/**
* pcim_enable_device - Managed pci_enable_device()
* @pdev: PCI device to be initialized
*
* Managed pci_enable_device().
*/
int pcim_enable_device(struct pci_dev *pdev)
{
struct pci_devres *dr;
int rc;
dr = get_pci_dr(pdev);
if (unlikely(!dr))
return -ENOMEM;
if (dr->enabled)
return 0;
rc = pci_enable_device(pdev);
if (!rc) {
pdev->is_managed = 1;
dr->enabled = 1;
}
return rc;
}
/**
* pcim_pin_device - Pin managed PCI device
* @pdev: PCI device to pin
*
* Pin managed PCI device @pdev. Pinned device won't be disabled on
* driver detach. @pdev must have been enabled with
* pcim_enable_device().
*/
void pcim_pin_device(struct pci_dev *pdev)
{
struct pci_devres *dr;
dr = find_pci_dr(pdev);
WARN_ON(!dr || !dr->enabled);
if (dr)
dr->pinned = 1;
}
/*
* pcibios_add_device - provide arch specific hooks when adding device dev
* @dev: the PCI device being added
*
* Permits the platform to provide architecture specific functionality when
* devices are added. This is the default implementation. Architecture
* implementations can override this.
*/
int __weak pcibios_add_device (struct pci_dev *dev)
{
return 0;
}
/**
* pcibios_release_device - provide arch specific hooks when releasing device dev
* @dev: the PCI device being released
*
* Permits the platform to provide architecture specific functionality when
* devices are released. This is the default implementation. Architecture
* implementations can override this.
*/
void __weak pcibios_release_device(struct pci_dev *dev) {}
/**
* pcibios_disable_device - disable arch specific PCI resources for device dev
* @dev: the PCI device to disable
*
* Disables architecture specific PCI resources for the device. This
* is the default implementation. Architecture implementations can
* override this.
*/
void __weak pcibios_disable_device (struct pci_dev *dev) {}
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}
/**
* pci_disable_enabled_device - Disable device without updating enable_cnt
* @dev: PCI device to disable
*
* NOTE: This function is a backend of PCI power management routines and is
* not supposed to be called drivers.
*/
void pci_disable_enabled_device(struct pci_dev *dev)
{
if (pci_is_enabled(dev))
do_pci_disable_device(dev);
}
/**
* pci_disable_device - Disable PCI device after use
* @dev: PCI device to be disabled
*
* Signal to the system that the PCI device is not in use by the system
* anymore. This only involves disabling PCI bus-mastering, if active.
*
* Note we don't actually disable the device until all callers of
* pci_enable_device() have called pci_disable_device().
*/
void
pci_disable_device(struct pci_dev *dev)
{
struct pci_devres *dr;
dr = find_pci_dr(dev);
if (dr)
dr->enabled = 0;
dev_WARN_ONCE(&dev->dev, atomic_read(&dev->enable_cnt) <= 0,
"disabling already-disabled device");
if (atomic_dec_return(&dev->enable_cnt) != 0)
return;
do_pci_disable_device(dev);
dev->is_busmaster = 0;
}
/**
* pcibios_set_pcie_reset_state - set reset state for device dev
* @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
* Sets the PCIe reset state for the device. This is the default
* implementation. Architecture implementations can override this.
*/
int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev,
enum pcie_reset_state state)
{
return -EINVAL;
}
/**
* pci_set_pcie_reset_state - set reset state for device dev
* @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
* Sets the PCI reset state for the device.
*/
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
{
return pcibios_set_pcie_reset_state(dev, state);
}
/**
* pci_check_pme_status - Check if given device has generated PME.
* @dev: Device to check.
*
* Check the PME status of the device and if set, clear it and clear PME enable
* (if set). Return 'true' if PME status and PME enable were both set or
* 'false' otherwise.
*/
bool pci_check_pme_status(struct pci_dev *dev)
{
int pmcsr_pos;
u16 pmcsr;
bool ret = false;
if (!dev->pm_cap)
return false;
pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
pci_read_config_word(dev, pmcsr_pos, &pmcsr);
if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
return false;
/* Clear PME status. */
pmcsr |= PCI_PM_CTRL_PME_STATUS;
if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
/* Disable PME to avoid interrupt flood. */
pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
ret = true;
}
pci_write_config_word(dev, pmcsr_pos, pmcsr);
return ret;
}
/**
* pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
* @dev: Device to handle.
* @pme_poll_reset: Whether or not to reset the device's pme_poll flag.
*
* Check if @dev has generated PME and queue a resume request for it in that
* case.
*/
static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset)
{
if (pme_poll_reset && dev->pme_poll)
dev->pme_poll = false;
if (pci_check_pme_status(dev)) {
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
}
return 0;
}
/**
* pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
* @bus: Top bus of the subtree to walk.
*/
void pci_pme_wakeup_bus(struct pci_bus *bus)
{
if (bus)
pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
}
/**
* pci_wakeup - Wake up a PCI device
* @pci_dev: Device to handle.
* @ign: ignored parameter
*/
static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
{
pci_wakeup_event(pci_dev);
pm_request_resume(&pci_dev->dev);
return 0;
}
/**
* pci_wakeup_bus - Walk given bus and wake up devices on it
* @bus: Top bus of the subtree to walk.
*/
void pci_wakeup_bus(struct pci_bus *bus)
{
if (bus)
pci_walk_bus(bus, pci_wakeup, NULL);
}
/**
* pci_pme_capable - check the capability of PCI device to generate PME#
* @dev: PCI device to handle.
* @state: PCI state from which device will issue PME#.
*/
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
{
if (!dev->pm_cap)
return false;
return !!(dev->pme_support & (1 << state));
}
static void pci_pme_list_scan(struct work_struct *work)
{
struct pci_pme_device *pme_dev, *n;
mutex_lock(&pci_pme_list_mutex);
if (!list_empty(&pci_pme_list)) {
list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
if (pme_dev->dev->pme_poll) {
struct pci_dev *bridge;
bridge = pme_dev->dev->bus->self;
/*
* If bridge is in low power state, the
* configuration space of subordinate devices
* may be not accessible
*/
if (bridge && bridge->current_state != PCI_D0)
continue;
pci_pme_wakeup(pme_dev->dev, NULL);
} else {
list_del(&pme_dev->list);
kfree(pme_dev);
}
}
if (!list_empty(&pci_pme_list))
schedule_delayed_work(&pci_pme_work,
msecs_to_jiffies(PME_TIMEOUT));
}
mutex_unlock(&pci_pme_list_mutex);
}
/**
* pci_pme_active - enable or disable PCI device's PME# function
* @dev: PCI device to handle.
* @enable: 'true' to enable PME# generation; 'false' to disable it.
*
* The caller must verify that the device is capable of generating PME# before
* calling this function with @enable equal to 'true'.
*/
void pci_pme_active(struct pci_dev *dev, bool enable)
{
u16 pmcsr;
if (!dev->pme_support)
return;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
/* Clear PME_Status by writing 1 to it and enable PME# */
pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
if (!enable)
pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
/*
* PCI (as opposed to PCIe) PME requires that the device have
* its PME# line hooked up correctly. Not all hardware vendors
* do this, so the PME never gets delivered and the device
* remains asleep. The easiest way around this is to
* periodically walk the list of suspended devices and check
* whether any have their PME flag set. The assumption is that
* we'll wake up often enough anyway that this won't be a huge
* hit, and the power savings from the devices will still be a
* win.
*
* Although PCIe uses in-band PME message instead of PME# line
* to report PME, PME does not work for some PCIe devices in
* reality. For example, there are devices that set their PME
* status bits, but don't really bother to send a PME message;
* there are PCI Express Root Ports that don't bother to
* trigger interrupts when they receive PME messages from the
* devices below. So PME poll is used for PCIe devices too.
*/
if (dev->pme_poll) {
struct pci_pme_device *pme_dev;
if (enable) {
pme_dev = kmalloc(sizeof(struct pci_pme_device),
GFP_KERNEL);
if (!pme_dev) {
dev_warn(&dev->dev, "can't enable PME#\n");
return;
}
pme_dev->dev = dev;
mutex_lock(&pci_pme_list_mutex);
list_add(&pme_dev->list, &pci_pme_list);
if (list_is_singular(&pci_pme_list))
schedule_delayed_work(&pci_pme_work,
msecs_to_jiffies(PME_TIMEOUT));
mutex_unlock(&pci_pme_list_mutex);
} else {
mutex_lock(&pci_pme_list_mutex);
list_for_each_entry(pme_dev, &pci_pme_list, list) {
if (pme_dev->dev == dev) {
list_del(&pme_dev->list);
kfree(pme_dev);
break;
}
}
mutex_unlock(&pci_pme_list_mutex);
}
}
dev_dbg(&dev->dev, "PME# %s\n", enable ? "enabled" : "disabled");
}
/**
* __pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
* @runtime: True if the events are to be generated at run time
* @enable: True to enable event generation; false to disable
*
* This enables the device as a wakeup event source, or disables it.
* When such events involves platform-specific hooks, those hooks are
* called automatically by this routine.
*
* Devices with legacy power management (no standard PCI PM capabilities)
* always require such platform hooks.
*
* RETURN VALUE:
* 0 is returned on success
* -EINVAL is returned if device is not supposed to wake up the system
* Error code depending on the platform is returned if both the platform and
* the native mechanism fail to enable the generation of wake-up events
*/
int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
bool runtime, bool enable)
{
int ret = 0;
if (enable && !runtime && !device_may_wakeup(&dev->dev))
return -EINVAL;
/* Don't do the same thing twice in a row for one device. */
if (!!enable == !!dev->wakeup_prepared)
return 0;
/*
* According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
* Anderson we should be doing PME# wake enable followed by ACPI wake
* enable. To disable wake-up we call the platform first, for symmetry.
*/
if (enable) {
int error;
if (pci_pme_capable(dev, state))
pci_pme_active(dev, true);
else
ret = 1;
error = runtime ? platform_pci_run_wake(dev, true) :
platform_pci_sleep_wake(dev, true);
if (ret)
ret = error;
if (!ret)
dev->wakeup_prepared = true;
} else {
if (runtime)
platform_pci_run_wake(dev, false);
else
platform_pci_sleep_wake(dev, false);
pci_pme_active(dev, false);
dev->wakeup_prepared = false;
}
return ret;
}
EXPORT_SYMBOL(__pci_enable_wake);
/**
* pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
* @dev: PCI device to prepare
* @enable: True to enable wake-up event generation; false to disable
*
* Many drivers want the device to wake up the system from D3_hot or D3_cold
* and this function allows them to set that up cleanly - pci_enable_wake()
* should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
* ordering constraints.
*
* This function only returns error code if the device is not capable of
* generating PME# from both D3_hot and D3_cold, and the platform is unable to
* enable wake-up power for it.
*/
int pci_wake_from_d3(struct pci_dev *dev, bool enable)
{
return pci_pme_capable(dev, PCI_D3cold) ?
pci_enable_wake(dev, PCI_D3cold, enable) :
pci_enable_wake(dev, PCI_D3hot, enable);
}
/**
* pci_target_state - find an appropriate low power state for a given PCI dev
* @dev: PCI device
*
* Use underlying platform code to find a supported low power state for @dev.
* If the platform can't manage @dev, return the deepest state from which it
* can generate wake events, based on any available PME info.
*/
pci_power_t pci_target_state(struct pci_dev *dev)
{
pci_power_t target_state = PCI_D3hot;
if (platform_pci_power_manageable(dev)) {
/*
* Call the platform to choose the target state of the device
* and enable wake-up from this state if supported.
*/
pci_power_t state = platform_pci_choose_state(dev);
switch (state) {
case PCI_POWER_ERROR:
case PCI_UNKNOWN:
break;
case PCI_D1:
case PCI_D2:
if (pci_no_d1d2(dev))
break;
default:
target_state = state;
}
} else if (!dev->pm_cap) {
target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
if (dev->pme_support) {
while (target_state
&& !(dev->pme_support & (1 << target_state)))
target_state--;
}
}
return target_state;
}
/**
* pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
* @dev: Device to handle.
*
* Choose the power state appropriate for the device depending on whether
* it can wake up the system and/or is power manageable by the platform
* (PCI_D3hot is the default) and put the device into that state.
*/
int pci_prepare_to_sleep(struct pci_dev *dev)
{
pci_power_t target_state = pci_target_state(dev);
int error;
if (target_state == PCI_POWER_ERROR)
return -EIO;
/* D3cold during system suspend/hibernate is not supported */
if (target_state > PCI_D3hot)
target_state = PCI_D3hot;
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
if (error)
pci_enable_wake(dev, target_state, false);
return error;
}
/**
* pci_back_from_sleep - turn PCI device on during system-wide transition into working state
* @dev: Device to handle.
*
* Disable device's system wake-up capability and put it into D0.
*/
int pci_back_from_sleep(struct pci_dev *dev)
{
pci_enable_wake(dev, PCI_D0, false);
return pci_set_power_state(dev, PCI_D0);
}
/**
* pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
* @dev: PCI device being suspended.
*
* Prepare @dev to generate wake-up events at run time and put it into a low
* power state.
*/
int pci_finish_runtime_suspend(struct pci_dev *dev)
{
pci_power_t target_state = pci_target_state(dev);
int error;
if (target_state == PCI_POWER_ERROR)
return -EIO;
dev->runtime_d3cold = target_state == PCI_D3cold;
__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
error = pci_set_power_state(dev, target_state);
if (error) {
__pci_enable_wake(dev, target_state, true, false);
dev->runtime_d3cold = false;
}
return error;
}
/**
* pci_dev_run_wake - Check if device can generate run-time wake-up events.
* @dev: Device to check.
*
* Return true if the device itself is capable of generating wake-up events
* (through the platform or using the native PCIe PME) or if the device supports
* PME and one of its upstream bridges can generate wake-up events.
*/
bool pci_dev_run_wake(struct pci_dev *dev)
{
struct pci_bus *bus = dev->bus;
if (device_run_wake(&dev->dev))
return true;
if (!dev->pme_support)
return false;
while (bus->parent) {
struct pci_dev *bridge = bus->self;
if (device_run_wake(&bridge->dev))
return true;
bus = bus->parent;
}
/* We have reached the root bus. */
if (bus->bridge)
return device_run_wake(bus->bridge);
return false;
}
EXPORT_SYMBOL_GPL(pci_dev_run_wake);
void pci_config_pm_runtime_get(struct pci_dev *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;
if (parent)
pm_runtime_get_sync(parent);
pm_runtime_get_noresume(dev);
/*
* pdev->current_state is set to PCI_D3cold during suspending,
* so wait until suspending completes
*/
pm_runtime_barrier(dev);
/*
* Only need to resume devices in D3cold, because config
* registers are still accessible for devices suspended but
* not in D3cold.
*/
if (pdev->current_state == PCI_D3cold)
pm_runtime_resume(dev);
}
void pci_config_pm_runtime_put(struct pci_dev *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;
pm_runtime_put(dev);
if (parent)
pm_runtime_put_sync(parent);
}
/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
*/
void pci_pm_init(struct pci_dev *dev)
{
int pm;
u16 pmc;
pm_runtime_forbid(&dev->dev);
pm_runtime_set_active(&dev->dev);
pm_runtime_enable(&dev->dev);
device_enable_async_suspend(&dev->dev);
dev->wakeup_prepared = false;
dev->pm_cap = 0;
dev->pme_support = 0;
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
if (!pm)
return;
/* Check device's ability to generate PME# */
pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
pmc & PCI_PM_CAP_VER_MASK);
return;
}
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
dev->d3cold_allowed = true;
dev->d1_support = false;
dev->d2_support = false;
if (!pci_no_d1d2(dev)) {
if (pmc & PCI_PM_CAP_D1)
dev->d1_support = true;
if (pmc & PCI_PM_CAP_D2)
dev->d2_support = true;
if (dev->d1_support || dev->d2_support)
dev_printk(KERN_DEBUG, &dev->dev, "supports%s%s\n",
dev->d1_support ? " D1" : "",
dev->d2_support ? " D2" : "");
}
pmc &= PCI_PM_CAP_PME_MASK;
if (pmc) {
dev_printk(KERN_DEBUG, &dev->dev,
"PME# supported from%s%s%s%s%s\n",
(pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
(pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
(pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
(pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
(pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
dev->pme_poll = true;
/*
* Make device's PM flags reflect the wake-up capability, but
* let the user space enable it to wake up the system as needed.
*/
device_set_wakeup_capable(&dev->dev, true);
/* Disable the PME# generation functionality */
pci_pme_active(dev, false);
}
}
static void pci_add_saved_cap(struct pci_dev *pci_dev,
struct pci_cap_saved_state *new_cap)
{
hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
}
/**
* pci_add_cap_save_buffer - allocate buffer for saving given capability registers
* @dev: the PCI device
* @cap: the capability to allocate the buffer for
* @size: requested size of the buffer
*/
static int pci_add_cap_save_buffer(
struct pci_dev *dev, char cap, unsigned int size)
{
int pos;
struct pci_cap_saved_state *save_state;
pos = pci_find_capability(dev, cap);
if (pos <= 0)
return 0;
save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
if (!save_state)
return -ENOMEM;
save_state->cap.cap_nr = cap;
save_state->cap.size = size;
pci_add_saved_cap(dev, save_state);
return 0;
}
/**
* pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
* @dev: the PCI device
*/
void pci_allocate_cap_save_buffers(struct pci_dev *dev)
{
int error;
error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
PCI_EXP_SAVE_REGS * sizeof(u16));
if (error)
dev_err(&dev->dev,
"unable to preallocate PCI Express save buffer\n");
error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
if (error)
dev_err(&dev->dev,
"unable to preallocate PCI-X save buffer\n");
}
void pci_free_cap_save_buffers(struct pci_dev *dev)
{
struct pci_cap_saved_state *tmp;
struct hlist_node *n;
hlist_for_each_entry_safe(tmp, n, &dev->saved_cap_space, next)
kfree(tmp);
}
/**
* pci_configure_ari - enable or disable ARI forwarding
* @dev: the PCI device
*
* If @dev and its upstream bridge both support ARI, enable ARI in the
* bridge. Otherwise, disable ARI in the bridge.
*/
void pci_configure_ari(struct pci_dev *dev)
{
u32 cap;
struct pci_dev *bridge;
if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
return;
bridge = dev->bus->self;
if (!bridge)
return;
pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &cap);
if (!(cap & PCI_EXP_DEVCAP2_ARI))
return;
if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI)) {
pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ARI);
bridge->ari_enabled = 1;
} else {
pcie_capability_clear_word(bridge, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ARI);
bridge->ari_enabled = 0;
}
}
/**
* pci_enable_ido - enable ID-based Ordering on a device
* @dev: the PCI device
* @type: which types of IDO to enable
*
* Enable ID-based ordering on @dev. @type can contain the bits
* %PCI_EXP_IDO_REQUEST and/or %PCI_EXP_IDO_COMPLETION to indicate
* which types of transactions are allowed to be re-ordered.
*/
void pci_enable_ido(struct pci_dev *dev, unsigned long type)
{
u16 ctrl = 0;
if (type & PCI_EXP_IDO_REQUEST)
ctrl |= PCI_EXP_DEVCTL2_IDO_REQ_EN;
if (type & PCI_EXP_IDO_COMPLETION)
ctrl |= PCI_EXP_DEVCTL2_IDO_CMP_EN;
if (ctrl)
pcie_capability_set_word(dev, PCI_EXP_DEVCTL2, ctrl);
}
EXPORT_SYMBOL(pci_enable_ido);
/**
* pci_disable_ido - disable ID-based ordering on a device
* @dev: the PCI device
* @type: which types of IDO to disable
*/
void pci_disable_ido(struct pci_dev *dev, unsigned long type)
{
u16 ctrl = 0;
if (type & PCI_EXP_IDO_REQUEST)
ctrl |= PCI_EXP_DEVCTL2_IDO_REQ_EN;
if (type & PCI_EXP_IDO_COMPLETION)
ctrl |= PCI_EXP_DEVCTL2_IDO_CMP_EN;
if (ctrl)
pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2, ctrl);
}
EXPORT_SYMBOL(pci_disable_ido);
/**
* pci_enable_obff - enable optimized buffer flush/fill
* @dev: PCI device
* @type: type of signaling to use
*
* Try to enable @type OBFF signaling on @dev. It will try using WAKE#
* signaling if possible, falling back to message signaling only if
* WAKE# isn't supported. @type should indicate whether the PCIe link
* be brought out of L0s or L1 to send the message. It should be either
* %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
*
* If your device can benefit from receiving all messages, even at the
* power cost of bringing the link back up from a low power state, use
* %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
* preferred type).
*
* RETURNS:
* Zero on success, appropriate error number on failure.
*/
int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
{
u32 cap;
u16 ctrl;
int ret;
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
if (!(cap & PCI_EXP_DEVCAP2_OBFF_MASK))
return -ENOTSUPP; /* no OBFF support at all */
/* Make sure the topology supports OBFF as well */
if (dev->bus->self) {
ret = pci_enable_obff(dev->bus->self, type);
if (ret)
return ret;
}
pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &ctrl);
if (cap & PCI_EXP_DEVCAP2_OBFF_WAKE)
ctrl |= PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
else {
switch (type) {
case PCI_EXP_OBFF_SIGNAL_L0:
if (!(ctrl & PCI_EXP_DEVCTL2_OBFF_WAKE_EN))
ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGA_EN;
break;
case PCI_EXP_OBFF_SIGNAL_ALWAYS:
ctrl &= ~PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGB_EN;
break;
default:
WARN(1, "bad OBFF signal type\n");
return -ENOTSUPP;
}
}
pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, ctrl);
return 0;
}
EXPORT_SYMBOL(pci_enable_obff);
/**
* pci_disable_obff - disable optimized buffer flush/fill
* @dev: PCI device
*
* Disable OBFF on @dev.
*/
void pci_disable_obff(struct pci_dev *dev)
{
pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_OBFF_WAKE_EN);
}
EXPORT_SYMBOL(pci_disable_obff);
/**
* pci_ltr_supported - check whether a device supports LTR
* @dev: PCI device
*
* RETURNS:
* True if @dev supports latency tolerance reporting, false otherwise.
*/
static bool pci_ltr_supported(struct pci_dev *dev)
{
u32 cap;
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
return cap & PCI_EXP_DEVCAP2_LTR;
}
/**
* pci_enable_ltr - enable latency tolerance reporting
* @dev: PCI device
*
* Enable LTR on @dev if possible, which means enabling it first on
* upstream ports.
*
* RETURNS:
* Zero on success, errno on failure.
*/
int pci_enable_ltr(struct pci_dev *dev)
{
int ret;
/* Only primary function can enable/disable LTR */
if (PCI_FUNC(dev->devfn) != 0)
return -EINVAL;
if (!pci_ltr_supported(dev))
return -ENOTSUPP;
/* Enable upstream ports first */
if (dev->bus->self) {
ret = pci_enable_ltr(dev->bus->self);
if (ret)
return ret;
}
return pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_LTR_EN);
}
EXPORT_SYMBOL(pci_enable_ltr);
/**
* pci_disable_ltr - disable latency tolerance reporting
* @dev: PCI device
*/
void pci_disable_ltr(struct pci_dev *dev)
{
/* Only primary function can enable/disable LTR */
if (PCI_FUNC(dev->devfn) != 0)
return;
if (!pci_ltr_supported(dev))
return;
pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_LTR_EN);
}
EXPORT_SYMBOL(pci_disable_ltr);
static int __pci_ltr_scale(int *val)
{
int scale = 0;
while (*val > 1023) {
*val = (*val + 31) / 32;
scale++;
}
return scale;
}
/**
* pci_set_ltr - set LTR latency values
* @dev: PCI device
* @snoop_lat_ns: snoop latency in nanoseconds
* @nosnoop_lat_ns: nosnoop latency in nanoseconds
*
* Figure out the scale and set the LTR values accordingly.
*/
int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns)
{
int pos, ret, snoop_scale, nosnoop_scale;
u16 val;
if (!pci_ltr_supported(dev))
return -ENOTSUPP;
snoop_scale = __pci_ltr_scale(&snoop_lat_ns);
nosnoop_scale = __pci_ltr_scale(&nosnoop_lat_ns);
if (snoop_lat_ns > PCI_LTR_VALUE_MASK ||
nosnoop_lat_ns > PCI_LTR_VALUE_MASK)
return -EINVAL;
if ((snoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)) ||
(nosnoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)))
return -EINVAL;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
if (!pos)
return -ENOTSUPP;
val = (snoop_scale << PCI_LTR_SCALE_SHIFT) | snoop_lat_ns;
ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_SNOOP_LAT, val);
if (ret != 4)
return -EIO;
val = (nosnoop_scale << PCI_LTR_SCALE_SHIFT) | nosnoop_lat_ns;
ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_NOSNOOP_LAT, val);
if (ret != 4)
return -EIO;
return 0;
}
EXPORT_SYMBOL(pci_set_ltr);
static int pci_acs_enable;
/**
* pci_request_acs - ask for ACS to be enabled if supported
*/
void pci_request_acs(void)
{
pci_acs_enable = 1;
}
/**
* pci_enable_acs - enable ACS if hardware support it
* @dev: the PCI device
*/
void pci_enable_acs(struct pci_dev *dev)
{
int pos;
u16 cap;
u16 ctrl;
if (!pci_acs_enable)
return;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
if (!pos)
return;
pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
/* Source Validation */
ctrl |= (cap & PCI_ACS_SV);
/* P2P Request Redirect */
ctrl |= (cap & PCI_ACS_RR);
/* P2P Completion Redirect */
ctrl |= (cap & PCI_ACS_CR);
/* Upstream Forwarding */
ctrl |= (cap & PCI_ACS_UF);
pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
}
static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags)
{
int pos;
u16 cap, ctrl;
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ACS);
if (!pos)
return false;
/*
* Except for egress control, capabilities are either required
* or only required if controllable. Features missing from the
* capability field can therefore be assumed as hard-wired enabled.
*/
pci_read_config_word(pdev, pos + PCI_ACS_CAP, &cap);
acs_flags &= (cap | PCI_ACS_EC);
pci_read_config_word(pdev, pos + PCI_ACS_CTRL, &ctrl);
return (ctrl & acs_flags) == acs_flags;
}
/**
* pci_acs_enabled - test ACS against required flags for a given device
* @pdev: device to test
* @acs_flags: required PCI ACS flags
*
* Return true if the device supports the provided flags. Automatically
* filters out flags that are not implemented on multifunction devices.
*
* Note that this interface checks the effective ACS capabilities of the
* device rather than the actual capabilities. For instance, most single
* function endpoints are not required to support ACS because they have no
* opportunity for peer-to-peer access. We therefore return 'true'
* regardless of whether the device exposes an ACS capability. This makes
* it much easier for callers of this function to ignore the actual type
* or topology of the device when testing ACS support.
*/
bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
{
int ret;
ret = pci_dev_specific_acs_enabled(pdev, acs_flags);
if (ret >= 0)
return ret > 0;
/*
* Conventional PCI and PCI-X devices never support ACS, either
* effectively or actually. The shared bus topology implies that
* any device on the bus can receive or snoop DMA.
*/
if (!pci_is_pcie(pdev))
return false;
switch (pci_pcie_type(pdev)) {
/*
* PCI/X-to-PCIe bridges are not specifically mentioned by the spec,
* but since their primary interface is PCI/X, we conservatively
* handle them as we would a non-PCIe device.
*/
case PCI_EXP_TYPE_PCIE_BRIDGE:
/*
* PCIe 3.0, 6.12.1 excludes ACS on these devices. "ACS is never
* applicable... must never implement an ACS Extended Capability...".
* This seems arbitrary, but we take a conservative interpretation
* of this statement.
*/
case PCI_EXP_TYPE_PCI_BRIDGE:
case PCI_EXP_TYPE_RC_EC:
return false;
/*
* PCIe 3.0, 6.12.1.1 specifies that downstream and root ports should
* implement ACS in order to indicate their peer-to-peer capabilities,
* regardless of whether they are single- or multi-function devices.
*/
case PCI_EXP_TYPE_DOWNSTREAM:
case PCI_EXP_TYPE_ROOT_PORT:
return pci_acs_flags_enabled(pdev, acs_flags);
/*
* PCIe 3.0, 6.12.1.2 specifies ACS capabilities that should be
* implemented by the remaining PCIe types to indicate peer-to-peer
* capabilities, but only when they are part of a multifunction
* device. The footnote for section 6.12 indicates the specific
* PCIe types included here.
*/
case PCI_EXP_TYPE_ENDPOINT:
case PCI_EXP_TYPE_UPSTREAM:
case PCI_EXP_TYPE_LEG_END:
case PCI_EXP_TYPE_RC_END:
if (!pdev->multifunction)
break;
return pci_acs_flags_enabled(pdev, acs_flags);
}
/*
* PCIe 3.0, 6.12.1.3 specifies no ACS capabilities are applicable
* to single function devices with the exception of downstream ports.
*/
return true;
}
/**
* pci_acs_path_enable - test ACS flags from start to end in a hierarchy
* @start: starting downstream device
* @end: ending upstream device or NULL to search to the root bus
* @acs_flags: required flags
*
* Walk up a device tree from start to end testing PCI ACS support. If
* any step along the way does not support the required flags, return false.
*/
bool pci_acs_path_enabled(struct pci_dev *start,
struct pci_dev *end, u16 acs_flags)
{
struct pci_dev *pdev, *parent = start;
do {
pdev = parent;
if (!pci_acs_enabled(pdev, acs_flags))
return false;
if (pci_is_root_bus(pdev->bus))
return (end == NULL);
parent = pdev->bus->self;
} while (pdev != end);
return true;
}
/**
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
* @dev: the PCI device
* @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
*
* Perform INTx swizzling for a device behind one level of bridge. This is
* required by section 9.1 of the PCI-to-PCI bridge specification for devices
* behind bridges on add-in cards. For devices with ARI enabled, the slot
* number is always 0 (see the Implementation Note in section 2.2.8.1 of
* the PCI Express Base Specification, Revision 2.1)
*/
u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin)
{
int slot;
if (pci_ari_enabled(dev->bus))
slot = 0;
else
slot = PCI_SLOT(dev->devfn);
return (((pin - 1) + slot) % 4) + 1;
}
int
pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
{
u8 pin;
pin = dev->pin;
if (!pin)
return -1;
while (!pci_is_root_bus(dev->bus)) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
*bridge = dev;
return pin;
}
/**
* pci_common_swizzle - swizzle INTx all the way to root bridge
* @dev: the PCI device
* @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
*
* Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
* bridges all the way up to a PCI root bus.
*/
u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
{
u8 pin = *pinp;
while (!pci_is_root_bus(dev->bus)) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
*pinp = pin;
return PCI_SLOT(dev->devfn);
}
/**
* pci_release_region - Release a PCI bar
* @pdev: PCI device whose resources were previously reserved by pci_request_region
* @bar: BAR to release
*
* Releases the PCI I/O and memory resources previously reserved by a
* successful call to pci_request_region. Call this function only
* after all use of the PCI regions has ceased.
*/
void pci_release_region(struct pci_dev *pdev, int bar)
{
struct pci_devres *dr;
if (pci_resource_len(pdev, bar) == 0)
return;
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
release_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
release_mem_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
dr = find_pci_dr(pdev);
if (dr)
dr->region_mask &= ~(1 << bar);
}
/**
* __pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
* @exclusive: whether the region access is exclusive or not
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* If @exclusive is set, then the region is marked so that userspace
* is explicitly not allowed to map the resource via /dev/mem or
* sysfs MMIO access.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
int exclusive)
{
struct pci_devres *dr;
if (pci_resource_len(pdev, bar) == 0)
return 0;
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
if (!request_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar), res_name))
goto err_out;
}
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
if (!__request_mem_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar), res_name,
exclusive))
goto err_out;
}
dr = find_pci_dr(pdev);
if (dr)
dr->region_mask |= 1 << bar;
return 0;
err_out:
dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar,
&pdev->resource[bar]);
return -EBUSY;
}
/**
* pci_request_region - Reserve PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource
*
* Mark the PCI region associated with PCI device @pdev BAR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
{
return __pci_request_region(pdev, bar, res_name, 0);
}
/**
* pci_request_region_exclusive - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*
* The key difference that _exclusive makes it that userspace is
* explicitly not allowed to map the resource via /dev/mem or
* sysfs.
*/
int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
{
return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
}
/**
* pci_release_selected_regions - Release selected PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved
* @bars: Bitmask of BARs to be released
*
* Release selected PCI I/O and memory resources previously reserved.
* Call this function only after all use of the PCI regions has ceased.
*/
void pci_release_selected_regions(struct pci_dev *pdev, int bars)
{
int i;
for (i = 0; i < 6; i++)
if (bars & (1 << i))
pci_release_region(pdev, i);
}
static int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
const char *res_name, int excl)
{
int i;
for (i = 0; i < 6; i++)
if (bars & (1 << i))
if (__pci_request_region(pdev, i, res_name, excl))
goto err_out;
return 0;
err_out:
while(--i >= 0)
if (bars & (1 << i))
pci_release_region(pdev, i);
return -EBUSY;
}
/**
* pci_request_selected_regions - Reserve selected PCI I/O and memory resources
* @pdev: PCI device whose resources are to be reserved
* @bars: Bitmask of BARs to be requested
* @res_name: Name to be associated with resource
*/
int pci_request_selected_regions(struct pci_dev *pdev, int bars,
const char *res_name)
{
return __pci_request_selected_regions(pdev, bars, res_name, 0);
}
int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
int bars, const char *res_name)
{
return __pci_request_selected_regions(pdev, bars, res_name,
IORESOURCE_EXCLUSIVE);
}
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved by pci_request_regions
*
* Releases all PCI I/O and memory resources previously reserved by a
* successful call to pci_request_regions. Call this function only
* after all use of the PCI regions has ceased.
*/
void pci_release_regions(struct pci_dev *pdev)
{
pci_release_selected_regions(pdev, (1 << 6) - 1);
}
/**
* pci_request_regions - Reserved PCI I/O and memory resources
* @pdev: PCI device whose resources are to be reserved
* @res_name: Name to be associated with resource.
*
* Mark all PCI regions associated with PCI device @pdev as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int pci_request_regions(struct pci_dev *pdev, const char *res_name)
{
return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
}
/**
* pci_request_regions_exclusive - Reserved PCI I/O and memory resources
* @pdev: PCI device whose resources are to be reserved
* @res_name: Name to be associated with resource.
*
* Mark all PCI regions associated with PCI device @pdev as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* pci_request_regions_exclusive() will mark the region so that
* /dev/mem and the sysfs MMIO access will not be allowed.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
{
return pci_request_selected_regions_exclusive(pdev,
((1 << 6) - 1), res_name);
}
static void __pci_set_master(struct pci_dev *dev, bool enable)
{
u16 old_cmd, cmd;
pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
if (enable)
cmd = old_cmd | PCI_COMMAND_MASTER;
else
cmd = old_cmd & ~PCI_COMMAND_MASTER;
if (cmd != old_cmd) {
dev_dbg(&dev->dev, "%s bus mastering\n",
enable ? "enabling" : "disabling");
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
dev->is_busmaster = enable;
}
/**
* pcibios_setup - process "pci=" kernel boot arguments
* @str: string used to pass in "pci=" kernel boot arguments
*
* Process kernel boot arguments. This is the default implementation.
* Architecture specific implementations can override this as necessary.
*/
char * __weak __init pcibios_setup(char *str)
{
return str;
}
/**
* pcibios_set_master - enable PCI bus-mastering for device dev
* @dev: the PCI device to enable
*
* Enables PCI bus-mastering for the device. This is the default
* implementation. Architecture specific implementations can override
* this if necessary.
*/
void __weak pcibios_set_master(struct pci_dev *dev)
{
u8 lat;
/* The latency timer doesn't apply to PCIe (either Type 0 or Type 1) */
if (pci_is_pcie(dev))
return;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
else
return;
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
/**
* pci_set_master - enables bus-mastering for device dev
* @dev: the PCI device to enable
*
* Enables bus-mastering on the device and calls pcibios_set_master()
* to do the needed arch specific settings.
*/
void pci_set_master(struct pci_dev *dev)
{
__pci_set_master(dev, true);
pcibios_set_master(dev);
}
/**
* pci_clear_master - disables bus-mastering for device dev
* @dev: the PCI device to disable
*/
void pci_clear_master(struct pci_dev *dev)
{
__pci_set_master(dev, false);
}
/**
* pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
* @dev: the PCI device for which MWI is to be enabled
*
* Helper function for pci_set_mwi.
* Originally copied from drivers/net/acenic.c.
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int pci_set_cacheline_size(struct pci_dev *dev)
{
u8 cacheline_size;
if (!pci_cache_line_size)
return -EINVAL;
/* Validate current setting: the PCI_CACHE_LINE_SIZE must be
equal to or multiple of the right value. */
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
if (cacheline_size >= pci_cache_line_size &&
(cacheline_size % pci_cache_line_size) == 0)
return 0;
/* Write the correct value. */
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
/* Read it back. */
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
if (cacheline_size == pci_cache_line_size)
return 0;
dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
"supported\n", pci_cache_line_size << 2);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(pci_set_cacheline_size);
#ifdef PCI_DISABLE_MWI
int pci_set_mwi(struct pci_dev *dev)
{
return 0;
}
int pci_try_set_mwi(struct pci_dev *dev)
{
return 0;
}
void pci_clear_mwi(struct pci_dev *dev)
{
}
#else
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int
pci_set_mwi(struct pci_dev *dev)
{
int rc;
u16 cmd;
rc = pci_set_cacheline_size(dev);
if (rc)
return rc;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
/**
* pci_try_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
* Callers are not required to check the return value.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int pci_try_set_mwi(struct pci_dev *dev)
{
int rc = pci_set_mwi(dev);
return rc;
}
/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
*
* Disables PCI Memory-Write-Invalidate transaction on the device
*/
void
pci_clear_mwi(struct pci_dev *dev)
{
u16 cmd;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (cmd & PCI_COMMAND_INVALIDATE) {
cmd &= ~PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
#endif /* ! PCI_DISABLE_MWI */
/**
* pci_intx - enables/disables PCI INTx for device dev
* @pdev: the PCI device to operate on
* @enable: boolean: whether to enable or disable PCI INTx
*
* Enables/disables PCI INTx for device dev
*/
void
pci_intx(struct pci_dev *pdev, int enable)
{
u16 pci_command, new;
pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
if (enable) {
new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
} else {
new = pci_command | PCI_COMMAND_INTX_DISABLE;
}
if (new != pci_command) {
struct pci_devres *dr;
pci_write_config_word(pdev, PCI_COMMAND, new);
dr = find_pci_dr(pdev);
if (dr && !dr->restore_intx) {
dr->restore_intx = 1;
dr->orig_intx = !enable;
}
}
}
/**
* pci_intx_mask_supported - probe for INTx masking support
* @dev: the PCI device to operate on
*
* Check if the device dev support INTx masking via the config space
* command word.
*/
bool pci_intx_mask_supported(struct pci_dev *dev)
{
bool mask_supported = false;
u16 orig, new;
if (dev->broken_intx_masking)
return false;
pci_cfg_access_lock(dev);
pci_read_config_word(dev, PCI_COMMAND, &orig);
pci_write_config_word(dev, PCI_COMMAND,
orig ^ PCI_COMMAND_INTX_DISABLE);
pci_read_config_word(dev, PCI_COMMAND, &new);
/*
* There's no way to protect against hardware bugs or detect them
* reliably, but as long as we know what the value should be, let's
* go ahead and check it.
*/
if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
dev_err(&dev->dev, "Command register changed from "
"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
mask_supported = true;
pci_write_config_word(dev, PCI_COMMAND, orig);
}
pci_cfg_access_unlock(dev);
return mask_supported;
}
EXPORT_SYMBOL_GPL(pci_intx_mask_supported);
static bool pci_check_and_set_intx_mask(struct pci_dev *dev, bool mask)
{
struct pci_bus *bus = dev->bus;
bool mask_updated = true;
u32 cmd_status_dword;
u16 origcmd, newcmd;
unsigned long flags;
bool irq_pending;
/*
* We do a single dword read to retrieve both command and status.
* Document assumptions that make this possible.
*/
BUILD_BUG_ON(PCI_COMMAND % 4);
BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS);
raw_spin_lock_irqsave(&pci_lock, flags);
bus->ops->read(bus, dev->devfn, PCI_COMMAND, 4, &cmd_status_dword);
irq_pending = (cmd_status_dword >> 16) & PCI_STATUS_INTERRUPT;
/*
* Check interrupt status register to see whether our device
* triggered the interrupt (when masking) or the next IRQ is
* already pending (when unmasking).
*/
if (mask != irq_pending) {
mask_updated = false;
goto done;
}
origcmd = cmd_status_dword;
newcmd = origcmd & ~PCI_COMMAND_INTX_DISABLE;
if (mask)
newcmd |= PCI_COMMAND_INTX_DISABLE;
if (newcmd != origcmd)
bus->ops->write(bus, dev->devfn, PCI_COMMAND, 2, newcmd);
done:
raw_spin_unlock_irqrestore(&pci_lock, flags);
return mask_updated;
}
/**
* pci_check_and_mask_intx - mask INTx on pending interrupt
* @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, mask it and
* return true in that case. False is returned if not interrupt was
* pending.
*/
bool pci_check_and_mask_intx(struct pci_dev *dev)
{
return pci_check_and_set_intx_mask(dev, true);
}
EXPORT_SYMBOL_GPL(pci_check_and_mask_intx);
/**
* pci_check_and_mask_intx - unmask INTx of no interrupt is pending
* @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, unmask it if not
* and return true. False is returned and the mask remains active if
* there was still an interrupt pending.
*/
bool pci_check_and_unmask_intx(struct pci_dev *dev)
{
return pci_check_and_set_intx_mask(dev, false);
}
EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
/**
* pci_msi_off - disables any MSI or MSI-X capabilities
* @dev: the PCI device to operate on
*
* If you want to use MSI, see pci_enable_msi() and friends.
* This is a lower-level primitive that allows us to disable
* MSI operation at the device level.
*/
void pci_msi_off(struct pci_dev *dev)
{
int pos;
u16 control;
/*
* This looks like it could go in msi.c, but we need it even when
* CONFIG_PCI_MSI=n. For the same reason, we can't use
* dev->msi_cap or dev->msix_cap here.
*/
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (pos) {
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
control &= ~PCI_MSI_FLAGS_ENABLE;
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
}
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (pos) {
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
control &= ~PCI_MSIX_FLAGS_ENABLE;
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
}
}
EXPORT_SYMBOL_GPL(pci_msi_off);
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
{
return dma_set_max_seg_size(&dev->dev, size);
}
EXPORT_SYMBOL(pci_set_dma_max_seg_size);
int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
{
return dma_set_seg_boundary(&dev->dev, mask);
}
EXPORT_SYMBOL(pci_set_dma_seg_boundary);
/**
* pci_wait_for_pending_transaction - waits for pending transaction
* @dev: the PCI device to operate on
*
* Return 0 if transaction is pending 1 otherwise.
*/
int pci_wait_for_pending_transaction(struct pci_dev *dev)
{
int i;
u16 status;
/* Wait for Transaction Pending bit clean */
for (i = 0; i < 4; i++) {
if (i)
msleep((1 << (i - 1)) * 100);
pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status);
if (!(status & PCI_EXP_DEVSTA_TRPND))
return 1;
}
return 0;
}
EXPORT_SYMBOL(pci_wait_for_pending_transaction);
static int pcie_flr(struct pci_dev *dev, int probe)
{
u32 cap;
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
if (!(cap & PCI_EXP_DEVCAP_FLR))
return -ENOTTY;
if (probe)
return 0;
if (!pci_wait_for_pending_transaction(dev))
dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
msleep(100);
return 0;
}
static int pci_af_flr(struct pci_dev *dev, int probe)
{
int i;
int pos;
u8 cap;
u8 status;
pos = pci_find_capability(dev, PCI_CAP_ID_AF);
if (!pos)
return -ENOTTY;
pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
return -ENOTTY;
if (probe)
return 0;
/* Wait for Transaction Pending bit clean */
for (i = 0; i < 4; i++) {
if (i)
msleep((1 << (i - 1)) * 100);
pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
if (!(status & PCI_AF_STATUS_TP))
goto clear;
}
dev_err(&dev->dev, "transaction is not cleared; "
"proceeding with reset anyway\n");
clear:
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
msleep(100);
return 0;
}
/**
* pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
* @dev: Device to reset.
* @probe: If set, only check if the device can be reset this way.
*
* If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
* unset, it will be reinitialized internally when going from PCI_D3hot to
* PCI_D0. If that's the case and the device is not in a low-power state
* already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset.
*
* NOTE: This causes the caller to sleep for twice the device power transition
* cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
* by default (i.e. unless the @dev's d3_delay field has a different value).
* Moreover, only devices in D0 can be reset by this function.
*/
static int pci_pm_reset(struct pci_dev *dev, int probe)
{
u16 csr;
if (!dev->pm_cap)
return -ENOTTY;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
return -ENOTTY;
if (probe)
return 0;
if (dev->current_state != PCI_D0)
return -EINVAL;
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D3hot;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
pci_dev_d3_sleep(dev);
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D0;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
pci_dev_d3_sleep(dev);
return 0;
}
/**
* pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
* @dev: Bridge device
*
* Use the bridge control register to assert reset on the secondary bus.
* Devices on the secondary bus are left in power-on state.
*/
void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
/*
* PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms. Double
* this to 2ms to ensure that we meet the minimum requirement.
*/
msleep(2);
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
/*
* Trhfa for conventional PCI is 2^25 clock cycles.
* Assuming a minimum 33MHz clock this results in a 1s
* delay before we can consider subordinate devices to
* be re-initialized. PCIe has some ways to shorten this,
* but we don't make use of them yet.
*/
ssleep(1);
}
EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
{
struct pci_dev *pdev;
if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
return -ENOTTY;
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
if (pdev != dev)
return -ENOTTY;
if (probe)
return 0;
pci_reset_bridge_secondary_bus(dev->bus->self);
return 0;
}
static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
{
int rc = -ENOTTY;
if (!hotplug || !try_module_get(hotplug->ops->owner))
return rc;
if (hotplug->ops->reset_slot)
rc = hotplug->ops->reset_slot(hotplug, probe);
module_put(hotplug->ops->owner);
return rc;
}
static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
{
struct pci_dev *pdev;
if (dev->subordinate || !dev->slot)
return -ENOTTY;
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
if (pdev != dev && pdev->slot == dev->slot)
return -ENOTTY;
return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
}
static int __pci_dev_reset(struct pci_dev *dev, int probe)
{
int rc;
might_sleep();
rc = pci_dev_specific_reset(dev, probe);
if (rc != -ENOTTY)
goto done;
rc = pcie_flr(dev, probe);
if (rc != -ENOTTY)
goto done;
rc = pci_af_flr(dev, probe);
if (rc != -ENOTTY)
goto done;
rc = pci_pm_reset(dev, probe);
if (rc != -ENOTTY)
goto done;
rc = pci_dev_reset_slot_function(dev, probe);
if (rc != -ENOTTY)
goto done;
rc = pci_parent_bus_reset(dev, probe);
done:
return rc;
}
static void pci_dev_lock(struct pci_dev *dev)
{
pci_cfg_access_lock(dev);
/* block PM suspend, driver probe, etc. */
device_lock(&dev->dev);
}
static void pci_dev_unlock(struct pci_dev *dev)
{
device_unlock(&dev->dev);
pci_cfg_access_unlock(dev);
}
static void pci_dev_save_and_disable(struct pci_dev *dev)
{
/*
* Wake-up device prior to save. PM registers default to D0 after
* reset and a simple register restore doesn't reliably return
* to a non-D0 state anyway.
*/
pci_set_power_state(dev, PCI_D0);
pci_save_state(dev);
/*
* Disable the device by clearing the Command register, except for
* INTx-disable which is set. This not only disables MMIO and I/O port
* BARs, but also prevents the device from being Bus Master, preventing
* DMA from the device including MSI/MSI-X interrupts. For PCI 2.3
* compliant devices, INTx-disable prevents legacy interrupts.
*/
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
}
static void pci_dev_restore(struct pci_dev *dev)
{
pci_restore_state(dev);
}
static int pci_dev_reset(struct pci_dev *dev, int probe)
{
int rc;
if (!probe)
pci_dev_lock(dev);
rc = __pci_dev_reset(dev, probe);
if (!probe)
pci_dev_unlock(dev);
return rc;
}
/**
* __pci_reset_function - reset a PCI device function
* @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
* to PCI config space in order to use this function.
*
* The device function is presumed to be unused when this function is called.
* Resetting the device will make the contents of PCI configuration space
* random, so any caller of this must be prepared to reinitialise the
* device including MSI, bus mastering, BARs, decoding IO and memory spaces,
* etc.
*
* Returns 0 if the device function was successfully reset or negative if the
* device doesn't support resetting a single function.
*/
int __pci_reset_function(struct pci_dev *dev)
{
return pci_dev_reset(dev, 0);
}
EXPORT_SYMBOL_GPL(__pci_reset_function);
/**
* __pci_reset_function_locked - reset a PCI device function while holding
* the @dev mutex lock.
* @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
* to PCI config space in order to use this function.
*
* The device function is presumed to be unused and the caller is holding
* the device mutex lock when this function is called.
* Resetting the device will make the contents of PCI configuration space
* random, so any caller of this must be prepared to reinitialise the
* device including MSI, bus mastering, BARs, decoding IO and memory spaces,
* etc.
*
* Returns 0 if the device function was successfully reset or negative if the
* device doesn't support resetting a single function.
*/
int __pci_reset_function_locked(struct pci_dev *dev)
{
return __pci_dev_reset(dev, 0);
}
EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
/**
* pci_probe_reset_function - check whether the device can be safely reset
* @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
* to PCI config space in order to use this function.
*
* Returns 0 if the device function can be reset or negative if the
* device doesn't support resetting a single function.
*/
int pci_probe_reset_function(struct pci_dev *dev)
{
return pci_dev_reset(dev, 1);
}
/**
* pci_reset_function - quiesce and reset a PCI device function
* @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
* to PCI config space in order to use this function.
*
* This function does not just reset the PCI portion of a device, but
* clears all the state associated with the device. This function differs
* from __pci_reset_function in that it saves and restores device state
* over the reset.
*
* Returns 0 if the device function was successfully reset or negative if the
* device doesn't support resetting a single function.
*/
int pci_reset_function(struct pci_dev *dev)
{
int rc;
rc = pci_dev_reset(dev, 1);
if (rc)
return rc;
pci_dev_save_and_disable(dev);
rc = pci_dev_reset(dev, 0);
pci_dev_restore(dev);
return rc;
}
EXPORT_SYMBOL_GPL(pci_reset_function);
/* Lock devices from the top of the tree down */
static void pci_bus_lock(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
pci_dev_lock(dev);
if (dev->subordinate)
pci_bus_lock(dev->subordinate);
}
}
/* Unlock devices from the bottom of the tree up */
static void pci_bus_unlock(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->subordinate)
pci_bus_unlock(dev->subordinate);
pci_dev_unlock(dev);
}
}
/* Lock devices from the top of the tree down */
static void pci_slot_lock(struct pci_slot *slot)
{
struct pci_dev *dev;
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot != slot)
continue;
pci_dev_lock(dev);
if (dev->subordinate)
pci_bus_lock(dev->subordinate);
}
}
/* Unlock devices from the bottom of the tree up */
static void pci_slot_unlock(struct pci_slot *slot)
{
struct pci_dev *dev;
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot != slot)
continue;
if (dev->subordinate)
pci_bus_unlock(dev->subordinate);
pci_dev_unlock(dev);
}
}
/* Save and disable devices from the top of the tree down */
static void pci_bus_save_and_disable(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable(dev->subordinate);
}
}
/*
* Restore devices from top of the tree down - parent bridges need to be
* restored before we can get to subordinate devices.
*/
static void pci_bus_restore(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
pci_dev_restore(dev);
if (dev->subordinate)
pci_bus_restore(dev->subordinate);
}
}
/* Save and disable devices from the top of the tree down */
static void pci_slot_save_and_disable(struct pci_slot *slot)
{
struct pci_dev *dev;
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot != slot)
continue;
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable(dev->subordinate);
}
}
/*
* Restore devices from top of the tree down - parent bridges need to be
* restored before we can get to subordinate devices.
*/
static void pci_slot_restore(struct pci_slot *slot)
{
struct pci_dev *dev;
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot != slot)
continue;
pci_dev_restore(dev);
if (dev->subordinate)
pci_bus_restore(dev->subordinate);
}
}
static int pci_slot_reset(struct pci_slot *slot, int probe)
{
int rc;
if (!slot)
return -ENOTTY;
if (!probe)
pci_slot_lock(slot);
might_sleep();
rc = pci_reset_hotplug_slot(slot->hotplug, probe);
if (!probe)
pci_slot_unlock(slot);
return rc;
}
/**
* pci_probe_reset_slot - probe whether a PCI slot can be reset
* @slot: PCI slot to probe
*
* Return 0 if slot can be reset, negative if a slot reset is not supported.
*/
int pci_probe_reset_slot(struct pci_slot *slot)
{
return pci_slot_reset(slot, 1);
}
EXPORT_SYMBOL_GPL(pci_probe_reset_slot);
/**
* pci_reset_slot - reset a PCI slot
* @slot: PCI slot to reset
*
* A PCI bus may host multiple slots, each slot may support a reset mechanism
* independent of other slots. For instance, some slots may support slot power
* control. In the case of a 1:1 bus to slot architecture, this function may
* wrap the bus reset to avoid spurious slot related events such as hotplug.
* Generally a slot reset should be attempted before a bus reset. All of the
* function of the slot and any subordinate buses behind the slot are reset
* through this function. PCI config space of all devices in the slot and
* behind the slot is saved before and restored after reset.
*
* Return 0 on success, non-zero on error.
*/
int pci_reset_slot(struct pci_slot *slot)
{
int rc;
rc = pci_slot_reset(slot, 1);
if (rc)
return rc;
pci_slot_save_and_disable(slot);
rc = pci_slot_reset(slot, 0);
pci_slot_restore(slot);
return rc;
}
EXPORT_SYMBOL_GPL(pci_reset_slot);
static int pci_bus_reset(struct pci_bus *bus, int probe)
{
if (!bus->self)
return -ENOTTY;
if (probe)
return 0;
pci_bus_lock(bus);
might_sleep();
pci_reset_bridge_secondary_bus(bus->self);
pci_bus_unlock(bus);
return 0;
}
/**
* pci_probe_reset_bus - probe whether a PCI bus can be reset
* @bus: PCI bus to probe
*
* Return 0 if bus can be reset, negative if a bus reset is not supported.
*/
int pci_probe_reset_bus(struct pci_bus *bus)
{
return pci_bus_reset(bus, 1);
}
EXPORT_SYMBOL_GPL(pci_probe_reset_bus);
/**
* pci_reset_bus - reset a PCI bus
* @bus: top level PCI bus to reset
*
* Do a bus reset on the given bus and any subordinate buses, saving
* and restoring state of all devices.
*
* Return 0 on success, non-zero on error.
*/
int pci_reset_bus(struct pci_bus *bus)
{
int rc;
rc = pci_bus_reset(bus, 1);
if (rc)
return rc;
pci_bus_save_and_disable(bus);
rc = pci_bus_reset(bus, 0);
pci_bus_restore(bus);
return rc;
}
EXPORT_SYMBOL_GPL(pci_reset_bus);
/**
* pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
* @dev: PCI device to query
*
* Returns mmrbc: maximum designed memory read count in bytes
* or appropriate error value.
*/
int pcix_get_max_mmrbc(struct pci_dev *dev)
{
int cap;
u32 stat;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
return -EINVAL;
if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
return -EINVAL;
return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
}
EXPORT_SYMBOL(pcix_get_max_mmrbc);
/**
* pcix_get_mmrbc - get PCI-X maximum memory read byte count
* @dev: PCI device to query
*
* Returns mmrbc: maximum memory read count in bytes
* or appropriate error value.
*/
int pcix_get_mmrbc(struct pci_dev *dev)
{
int cap;
u16 cmd;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
return -EINVAL;
if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
return -EINVAL;
return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
}
EXPORT_SYMBOL(pcix_get_mmrbc);
/**
* pcix_set_mmrbc - set PCI-X maximum memory read byte count
* @dev: PCI device to query
* @mmrbc: maximum memory read count in bytes
* valid values are 512, 1024, 2048, 4096
*
* If possible sets maximum memory read byte count, some bridges have erratas
* that prevent this.
*/
int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
{
int cap;
u32 stat, v, o;
u16 cmd;
if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
return -EINVAL;
v = ffs(mmrbc) - 10;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
return -EINVAL;
if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
return -EINVAL;
if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
return -E2BIG;
if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
return -EINVAL;
o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
if (o != v) {
if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
return -EIO;
cmd &= ~PCI_X_CMD_MAX_READ;
cmd |= v << 2;
if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
return -EIO;
}
return 0;
}
EXPORT_SYMBOL(pcix_set_mmrbc);
/**
* pcie_get_readrq - get PCI Express read request size
* @dev: PCI device to query
*
* Returns maximum memory read request in bytes
* or appropriate error value.
*/
int pcie_get_readrq(struct pci_dev *dev)
{
u16 ctl;
pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
return 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
}
EXPORT_SYMBOL(pcie_get_readrq);
/**
* pcie_set_readrq - set PCI Express maximum memory read request
* @dev: PCI device to query
* @rq: maximum memory read count in bytes
* valid values are 128, 256, 512, 1024, 2048, 4096
*
* If possible sets maximum memory read request in bytes
*/
int pcie_set_readrq(struct pci_dev *dev, int rq)
{
u16 v;
if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
return -EINVAL;
/*
* If using the "performance" PCIe config, we clamp the
* read rq size to the max packet size to prevent the
* host bridge generating requests larger than we can
* cope with
*/
if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
int mps = pcie_get_mps(dev);
if (mps < rq)
rq = mps;
}
v = (ffs(rq) - 8) << 12;
return pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_READRQ, v);
}
EXPORT_SYMBOL(pcie_set_readrq);
/**
* pcie_get_mps - get PCI Express maximum payload size
* @dev: PCI device to query
*
* Returns maximum payload size in bytes
*/
int pcie_get_mps(struct pci_dev *dev)
{
u16 ctl;
pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
return 128 << ((ctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
}
EXPORT_SYMBOL(pcie_get_mps);
/**
* pcie_set_mps - set PCI Express maximum payload size
* @dev: PCI device to query
* @mps: maximum payload size in bytes
* valid values are 128, 256, 512, 1024, 2048, 4096
*
* If possible sets maximum payload size
*/
int pcie_set_mps(struct pci_dev *dev, int mps)
{
u16 v;
if (mps < 128 || mps > 4096 || !is_power_of_2(mps))
return -EINVAL;
v = ffs(mps) - 8;
if (v > dev->pcie_mpss)
return -EINVAL;
v <<= 5;
return pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_PAYLOAD, v);
}
EXPORT_SYMBOL(pcie_set_mps);
/**
* pcie_get_minimum_link - determine minimum link settings of a PCI device
* @dev: PCI device to query
* @speed: storage for minimum speed
* @width: storage for minimum width
*
* This function will walk up the PCI device chain and determine the minimum
* link width and speed of the device.
*/
int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed,
enum pcie_link_width *width)
{
int ret;
*speed = PCI_SPEED_UNKNOWN;
*width = PCIE_LNK_WIDTH_UNKNOWN;
while (dev) {
u16 lnksta;
enum pci_bus_speed next_speed;
enum pcie_link_width next_width;
ret = pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
if (ret)
return ret;
next_speed = pcie_link_speed[lnksta & PCI_EXP_LNKSTA_CLS];
next_width = (lnksta & PCI_EXP_LNKSTA_NLW) >>
PCI_EXP_LNKSTA_NLW_SHIFT;
if (next_speed < *speed)
*speed = next_speed;
if (next_width < *width)
*width = next_width;
dev = dev->bus->self;
}
return 0;
}
EXPORT_SYMBOL(pcie_get_minimum_link);
/**
* pci_select_bars - Make BAR mask from the type of resource
* @dev: the PCI device for which BAR mask is made
* @flags: resource type mask to be selected
*
* This helper routine makes bar mask from the type of resource.
*/
int pci_select_bars(struct pci_dev *dev, unsigned long flags)
{
int i, bars = 0;
for (i = 0; i < PCI_NUM_RESOURCES; i++)
if (pci_resource_flags(dev, i) & flags)
bars |= (1 << i);
return bars;
}
/**
* pci_resource_bar - get position of the BAR associated with a resource
* @dev: the PCI device
* @resno: the resource number
* @type: the BAR type to be filled in
*
* Returns BAR position in config space, or 0 if the BAR is invalid.
*/
int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
{
int reg;
if (resno < PCI_ROM_RESOURCE) {
*type = pci_bar_unknown;
return PCI_BASE_ADDRESS_0 + 4 * resno;
} else if (resno == PCI_ROM_RESOURCE) {
*type = pci_bar_mem32;
return dev->rom_base_reg;
} else if (resno < PCI_BRIDGE_RESOURCES) {
/* device specific resource */
reg = pci_iov_resource_bar(dev, resno, type);
if (reg)
return reg;
}
dev_err(&dev->dev, "BAR %d: invalid resource\n", resno);
return 0;
}
/* Some architectures require additional programming to enable VGA */
static arch_set_vga_state_t arch_set_vga_state;
void __init pci_register_set_vga_state(arch_set_vga_state_t func)
{
arch_set_vga_state = func; /* NULL disables */
}
static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
unsigned int command_bits, u32 flags)
{
if (arch_set_vga_state)
return arch_set_vga_state(dev, decode, command_bits,
flags);
return 0;
}
/**
* pci_set_vga_state - set VGA decode state on device and parents if requested
* @dev: the PCI device
* @decode: true = enable decoding, false = disable decoding
* @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
* @flags: traverse ancestors and change bridges
* CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
unsigned int command_bits, u32 flags)
{
struct pci_bus *bus;
struct pci_dev *bridge;
u16 cmd;
int rc;
WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) & (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
/* ARCH specific VGA enables */
rc = pci_set_vga_state_arch(dev, decode, command_bits, flags);
if (rc)
return rc;
if (flags & PCI_VGA_STATE_CHANGE_DECODES) {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (decode == true)
cmd |= command_bits;
else
cmd &= ~command_bits;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
bus = dev->bus;
while (bus) {
bridge = bus->self;
if (bridge) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
&cmd);
if (decode == true)
cmd |= PCI_BRIDGE_CTL_VGA;
else
cmd &= ~PCI_BRIDGE_CTL_VGA;
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
cmd);
}
bus = bus->parent;
}
return 0;
}
bool pci_device_is_present(struct pci_dev *pdev)
{
u32 v;
return pci_bus_read_dev_vendor_id(pdev->bus, pdev->devfn, &v, 0);
}
EXPORT_SYMBOL_GPL(pci_device_is_present);
#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
static DEFINE_SPINLOCK(resource_alignment_lock);
/**
* pci_specified_resource_alignment - get resource alignment specified by user.
* @dev: the PCI device to get
*
* RETURNS: Resource alignment if it is specified.
* Zero if it is not specified.
*/
static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
{
int seg, bus, slot, func, align_order, count;
resource_size_t align = 0;
char *p;
spin_lock(&resource_alignment_lock);
p = resource_alignment_param;
while (*p) {
count = 0;
if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
p[count] == '@') {
p += count + 1;
} else {
align_order = -1;
}
if (sscanf(p, "%x:%x:%x.%x%n",
&seg, &bus, &slot, &func, &count) != 4) {
seg = 0;
if (sscanf(p, "%x:%x.%x%n",
&bus, &slot, &func, &count) != 3) {
/* Invalid format */
printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
p);
break;
}
}
p += count;
if (seg == pci_domain_nr(dev->bus) &&
bus == dev->bus->number &&
slot == PCI_SLOT(dev->devfn) &&
func == PCI_FUNC(dev->devfn)) {
if (align_order == -1) {
align = PAGE_SIZE;
} else {
align = 1 << align_order;
}
/* Found */
break;
}
if (*p != ';' && *p != ',') {
/* End of param or invalid format */
break;
}
p++;
}
spin_unlock(&resource_alignment_lock);
return align;
}
/*
* This function disables memory decoding and releases memory resources
* of the device specified by kernel's boot parameter 'pci=resource_alignment='.
* It also rounds up size to specified alignment.
* Later on, the kernel will assign page-aligned memory resource back
* to the device.
*/
void pci_reassigndev_resource_alignment(struct pci_dev *dev)
{
int i;
struct resource *r;
resource_size_t align, size;
u16 command;
/* check if specified PCI is target device to reassign */
align = pci_specified_resource_alignment(dev);
if (!align)
return;
if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
dev_warn(&dev->dev,
"Can't reassign resources to host bridge.\n");
return;
}
dev_info(&dev->dev,
"Disabling memory decoding and releasing memory resources.\n");
pci_read_config_word(dev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MEMORY;
pci_write_config_word(dev, PCI_COMMAND, command);
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
r = &dev->resource[i];
if (!(r->flags & IORESOURCE_MEM))
continue;
size = resource_size(r);
if (size < align) {
size = align;
dev_info(&dev->dev,
"Rounding up size of resource #%d to %#llx.\n",
i, (unsigned long long)size);
}
r->end = size - 1;
r->start = 0;
}
/* Need to disable bridge's resource window,
* to enable the kernel to reassign new resource
* window later on.
*/
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
r = &dev->resource[i];
if (!(r->flags & IORESOURCE_MEM))
continue;
r->end = resource_size(r) - 1;
r->start = 0;
}
pci_disable_bridge_window(dev);
}
}
static ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
{
if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
spin_lock(&resource_alignment_lock);
strncpy(resource_alignment_param, buf, count);
resource_alignment_param[count] = '\0';
spin_unlock(&resource_alignment_lock);
return count;
}
static ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
{
size_t count;
spin_lock(&resource_alignment_lock);
count = snprintf(buf, size, "%s", resource_alignment_param);
spin_unlock(&resource_alignment_lock);
return count;
}
static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
{
return pci_get_resource_alignment_param(buf, PAGE_SIZE);
}
static ssize_t pci_resource_alignment_store(struct bus_type *bus,
const char *buf, size_t count)
{
return pci_set_resource_alignment_param(buf, count);
}
BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
pci_resource_alignment_store);
static int __init pci_resource_alignment_sysfs_init(void)
{
return bus_create_file(&pci_bus_type,
&bus_attr_resource_alignment);
}
late_initcall(pci_resource_alignment_sysfs_init);
static void pci_no_domains(void)
{
#ifdef CONFIG_PCI_DOMAINS
pci_domains_supported = 0;
#endif
}
/**
* pci_ext_cfg_avail - can we access extended PCI config space?
*
* Returns 1 if we can access PCI extended config space (offsets
* greater than 0xff). This is the default implementation. Architecture
* implementations can override this.
*/
int __weak pci_ext_cfg_avail(void)
{
return 1;
}
void __weak pci_fixup_cardbus(struct pci_bus *bus)
{
}
EXPORT_SYMBOL(pci_fixup_cardbus);
static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
if (k)
*k++ = 0;
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
} else if (!strcmp(str, "noaer")) {
pci_no_aer();
} else if (!strncmp(str, "realloc=", 8)) {
pci_realloc_get_opt(str + 8);
} else if (!strncmp(str, "realloc", 7)) {
pci_realloc_get_opt("on");
} else if (!strcmp(str, "nodomains")) {
pci_no_domains();
} else if (!strncmp(str, "noari", 5)) {
pcie_ari_disabled = true;
} else if (!strncmp(str, "cbiosize=", 9)) {
pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
pci_cardbus_mem_size = memparse(str + 10, &str);
} else if (!strncmp(str, "resource_alignment=", 19)) {
pci_set_resource_alignment_param(str + 19,
strlen(str + 19));
} else if (!strncmp(str, "ecrc=", 5)) {
pcie_ecrc_get_policy(str + 5);
} else if (!strncmp(str, "hpiosize=", 9)) {
pci_hotplug_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "hpmemsize=", 10)) {
pci_hotplug_mem_size = memparse(str + 10, &str);
} else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
pcie_bus_config = PCIE_BUS_TUNE_OFF;
} else if (!strncmp(str, "pcie_bus_safe", 13)) {
pcie_bus_config = PCIE_BUS_SAFE;
} else if (!strncmp(str, "pcie_bus_perf", 13)) {
pcie_bus_config = PCIE_BUS_PERFORMANCE;
} else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
pcie_bus_config = PCIE_BUS_PEER2PEER;
} else if (!strncmp(str, "pcie_scan_all", 13)) {
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
}
}
str = k;
}
return 0;
}
early_param("pci", pci_setup);
EXPORT_SYMBOL(pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_io);
EXPORT_SYMBOL(pci_enable_device_mem);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pcim_enable_device);
EXPORT_SYMBOL(pcim_pin_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_request_regions_exclusive);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
EXPORT_SYMBOL(pci_request_region_exclusive);
EXPORT_SYMBOL(pci_release_selected_regions);
EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_clear_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_assign_resource);
EXPORT_SYMBOL(pci_find_parent_resource);
EXPORT_SYMBOL(pci_select_bars);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_pme_active);
EXPORT_SYMBOL(pci_wake_from_d3);
EXPORT_SYMBOL(pci_target_state);
EXPORT_SYMBOL(pci_prepare_to_sleep);
EXPORT_SYMBOL(pci_back_from_sleep);
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);