OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ffc89627ae
linux/drivers/usb/storage/unusual_devs.h
Alan Stern 9cfb95ef72 usb-storage: make onetouch a separate module 
This patch (as1217) converts usb-storage's onetouch subdriver into a
separate module.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:35 -07:00

1867 lines
55 KiB
C
Raw Blame History

/* Driver for USB Mass Storage compliant devices
* Unusual Devices File
*
* Current development and maintenance by:
* (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* Initial work by:
* (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* IMPORTANT NOTE: This file must be included in another file which does
* the following thing for it to work:
* The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
* before this file is included.
*/
/* If you edit this file, please try to keep it sorted first by VendorID,
* then by ProductID.
*
* If you want to add an entry for this file, be sure to include the
* following information:
* - a patch that adds the entry for your device, including your
* email address right above the entry (plus maybe a brief
* explanation of the reason for the entry),
* - a copy of /proc/bus/usb/devices with your device plugged in
* running with this patch.
* Send your submission to either Phil Dibowitz <phil@ipom.com> or
* Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
* USB development list <linux-usb@vger.kernel.org> and the USB storage list
* <usb-storage@lists.one-eyed-alien.net>
*/
/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
* use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
* because such entries mark devices which actually work correctly,
* as opposed to devices that do something strangely or wrongly.
*/
#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
#define NO_SDDR09
#endif
/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
*/
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
"ATMEL",
"SND1 Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200,
"Mitsumi",
"USB FDD",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by Rodolfo Quesada <rquesada@roqz.net> */
UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
"VIA Technologies Inc.",
"Mitsumi multi cardreader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
"HP",
"CD-Writer+",
US_SC_8070, US_PR_CB, NULL, 0),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
"HP",
"Personal Media Drive",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* Reported by Grant Grundler <grundler@parisc-linux.org>
* HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
*/
UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"HP",
"PhotoSmart R707",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
*/
UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
"NEC",
"NEC USB UF000x",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
"VIA Technologies Inc.",
"USB 2.0 Card Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
*/
UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
"Buffalo",
"DUB-P40G HDD",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
"Samsung Info. Systems America, Inc.",
"MP3 Player",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Orgad Shaneh <orgads@gmail.com> */
UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
"Samsung", "MP3 Player",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Christian Leber <christian@leber.de> */
UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
"TrekStor",
"i.Beat 115 2.0",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
/* Reported by Stefan Werner <dustbln@gmx.de> */
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
"TrekStor",
"i.Beat Joy 2.0",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Andrew Nayenko <relan@bk.ru> */
UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
"Nokia",
"Nokia 6288",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
"Nokia 3250",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by <honkkis@gmail.com> */
UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
"Nokia",
"E70",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Jon Hart <Jon.Hart@web.de> */
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
"Nokia",
"E60",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
* Einar Th. Einarsson <einarthered@gmail.com> */
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
"Nokia",
"N91",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Jiri Slaby <jirislaby@gmail.com> and
* Rene C. Castberg <Rene@Castberg.org> */
UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
"Nokia",
"N80",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
"Nokia",
"E61",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Bardur Arantsson <bardur@scientician.net> */
UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
"Nokia",
"6131",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
"Nokia",
"Nokia 6233",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Alex Corcoles <alex@corcoles.net> */
UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
"Nokia",
"6234",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
"FDC GOLD-2.30",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
/* Patch submitted by Daniel Drake <dsd@gentoo.org>
* Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
"Neuros Audio",
"USB 2.0 HD 2.5",
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/*
* Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
* The key does not actually break, but it returns zero sense which
* makes our SCSI stack to print confusing messages.
*/
UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
"USBest Technology", /* sold by Transcend */
"USB Mass Storage Device",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/*
* Bohdan Linda <bohdan.linda@gmail.com>
* 1GB USB sticks MyFlash High Speed. I have restricted
* the revision to my model only
*/
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
"USB 2.0",
"Flash Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
* Obviously the PROM has not been customized by the VAR;
* the Vendor and Product string descriptors are:
* Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
* Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
*/
UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
"Mitac",
"GPS",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
* This device chokes on both version of MODE SENSE which we have, so
* use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
*/
UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
"AMI",
"Virtual Floppy",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
"Finecam S3x",
US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
"Kyocera",
"Finecam S4",
US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
"Kyocera",
"Finecam S5",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
"Kyocera",
"CONTAX SL300R T*",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
/* Reported by Paul Stewart <stewart@wetlogic.net>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
"Hitachi",
"DVD-CAM DZ-MV100A Camcorder",
US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
* Frank Copeland <fjc@thingy.apana.org.au> */
UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Patch for Nikon coolpix 2000
* Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
"NIKON",
"NIKON DSC E2000",
US_SC_DEVICE, US_PR_DEVICE,NULL,
US_FL_NOT_LOCKABLE ),
/* Reported by Doug Maxey (dwm@austin.ibm.com) */
UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
"IBM",
"IBM RSA2",
US_SC_DEVICE, US_PR_CB, NULL,
US_FL_MAX_SECTORS_MIN),
/* Reported by Simon Levitt <simon@whattf.com>
* This entry needs Sub and Proto fields */
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
"Epson",
"875DC Storage",
US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Reported by Khalid Aziz <khalid@gonehiking.org>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
"Epson",
"785EPX Storage",
US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
/* Not sure who reported this originally but
* Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
* flag be added */
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm",
"FinePix 1400Zoom",
US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
* The device needs the flags only.
*/
UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
"ScanLogic",
"SL11R-IDE",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/* Reported by Kriston Fincher <kriston@airmail.net>
* Patch submitted by Sean Millichamp <sean@bruenor.org>
* This is to support the Panasonic PalmCam PV-SD4090
* This entry is needed because the device reports Sub=ff
*/
UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
"Panasonic",
"LS-120 Camera",
US_SC_UFI, US_PR_DEVICE, NULL, 0),
/* From Yukihiro Nakai, via zaitcev@yahoo.com.
* This is needed for CB instead of CBI */
UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
"Sharp CE-CW05",
"CD-R/RW Drive",
US_SC_8070, US_PR_CB, NULL, 0),
/* Reported by Adriaan Penning <a.penning@luon.net> */
UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
"Panasonic",
"DMC-LCx Camera",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
"LEICA",
"D-LUX Camera",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
/* Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
"Matshita",
"LS-120",
US_SC_8020, US_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB CompactFlash Adapter",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
#endif
/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
"SCM Microsystems Inc.",
"eUSB MMC Adapter",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
"Shuttle",
"eUSB MMC Adapter",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
"Sony",
"Hifd",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
"Shuttle",
"eUSB ATA/ATAPI Adapter",
US_SC_8020, US_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
"Shuttle",
"eUSB CompactFlash Adapter",
US_SC_8020, US_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
"Shuttle",
"CD-RW Device",
US_SC_8020, US_PR_CB, NULL, 0),
/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
"Samsung",
"YP-U3",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
*/
UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
"Kobian Mercury",
"Binocam DCB-132",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32),
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
"USB SCSI Adaptor",
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Iomega Clik! Drive
* Reported by David Chatenay <dchatenay@hotmail.com>
* The reason this is needed is not fully known.
*/
UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
"Iomega",
"USB Clik! 40",
US_SC_8070, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Added by Alan Stern <stern@rowland.harvard.edu> */
COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
"Linux",
"File-backed Storage Gadget",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_OK ),
/* Yakumo Mega Image 37
* Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Another Yakumo camera.
* Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Yakumo Mega Image 47
* Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Paul Ortyl <ortylp@3miasto.net>
* Note that it's similar to the device above, only different prodID */
UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
"Sony",
"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
"Sony",
"DSC-T1/T5/H5",
US_SC_8070, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by wim@geeks.nl */
UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
"Sony",
"Memorystick NW-MS7",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
"Sony",
"USB Floppy Drive",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
"Sony",
"Memorystick MSAC-US1",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
"Sony",
"Handycam",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
"Sony",
"Handycam HC-85",
US_SC_UFI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
"Sony",
"Memorystick MSC-U01N",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
"Sony",
"PEG N760c Memorystick",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
"Sony",
"Memorystick MSC-U03",
US_SC_UFI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Nathan Babb <nathan@lexi.com> */
UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* floppy reports multiple luns */
UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
"SAMSUNG",
"SFD-321U [FW 0C]",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
"Y-E Data",
"Flashbuster-U",
US_SC_DEVICE, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
"Y-E Data",
"Flashbuster-U",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
/* Reported by Johann Cardon <johann.cardon@free.fr>
* This entry is needed only because the device reports
* bInterfaceClass = 0xff (vendor-specific)
*/
UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
"Y-E Data",
"Silicon Media R/W",
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
/* Reported by RTE <raszilki@yandex.ru> */
UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
"JetFlash",
"TS1GJF2A/120",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
/* Reported by Andre Welter <a.r.welter@gmx.de>
* This antique device predates the release of the Bulk-only Transport
* spec, and if it gets a Get-Max-LUN then it requires the host to do a
* Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
* us from sending the request.
*/
UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
"Iomega",
"ZIP 100",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by <Hendryk.Pfeiffer@gmx.de> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
"DVD+-RW",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
*/
UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
"In-System",
"PyroGate External CD-ROM Enclosure (FCD-523)",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Submitted by Sven Anderson <sven-linux@anderson.de>
* There are at least four ProductIDs used for iPods, so I added 0x1202 and
* 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
* to change with firmware updates, I changed the range to maximum for all
* iPod entries.
*/
UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Avi Kivity <avi@argo.co.il> */
UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/*
* Reported by Tyson Vinson <lornoss@gmail.com>
* This particular productId is the iPod Nano
*/
UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Dan Williams <dcbw@redhat.com>
* Option N.V. mobile broadband modems
* Ignore driver CD mode and force into modem mode by default.
*/
/* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
"Option N.V.",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
0),
/* Reported by Blake Matheny <bmatheny@purdue.edu> */
UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
"Lexar",
"USB CF Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* The following two entries are for a Genesys USB to IDE
* converter chip, but it changes its ProductId depending
* on whether or not a disk or an optical device is enclosed
* They were originally reported by Alexander Oltu
* <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
* respectively.
*
* US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
* <phil@ipom.com> as these flags were made and hard-coded
* special-cases were pulled from scsiglue.c.
*/
UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Optical",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
"Genesys Logic",
"USB to SATA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* Reported by Hanno Boeck <hanno@gmx.de>
* Taken from the Lycoris Kernel */
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
"Vivitar",
"Vivicam 35Xx",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
"TEAC",
"Floppy Drive",
US_SC_UFI, US_PR_CB, NULL, 0 ),
/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
"SigmaTel",
"USBMSC Audio Player",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
* Thomas Bartosik <tbartdev@gmx-topmail.de> */
UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
"Prolific Technology Inc.",
"Mass Storage Device",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
"Prolific Technology Inc.",
"ATAPI-6 Bridge Controller",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
"Minolta",
"Dimage F300",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
"Minolta",
"DIMAGE E223",
US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
"Hagiwara",
"Flashgate",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
"Thomson Multimedia Inc.",
"RCA RD1080 MP3 Player",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
"RockChip",
"MP3",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
* Support the following product :
* "Dane-Elec MediaTouch"
*/
UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
"RockChip",
"MTP",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
* at least in the following products:
* "Magnex Digital Video Panel DVP 1800"
* "MP4 AIGO 4GB SLOT SD"
* "Teclast TL-C260 MP3"
* "i.Meizu PMP MP3/MP4"
* "Speed MV8 MP4 Audio Player"
*/
UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
"RockChip",
"ROCK MP3",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
"ATMEL",
"SND1 Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* Submitted by Roman Hodek <roman@hodek.net> */
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
"SanDisk Corporation",
"ImageMate CompactFlash USB",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
"Sandisk",
"ImageMate SDDR-12",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
/* Reported by Eero Volotinen <eero@ping-viini.org> */
UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
"Freecom Technologies",
"FHD-Classic",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
"Microtech",
"USB-SCSI-HD50",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
* Only revision 1.13 tested (same for all of the above devices,
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
* Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
* See also http://martin.wilck.bei.t-online.de/#kecf .
*/
UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
"Datafab",
"KECF-USB",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
* - They tell us they are using transport protocol CBI. In reality they
* are using transport protocol CB.
* - They don't like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
* - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
* bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
* So don't remove the US_PR_CB override!
* - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
*/
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
"Casio",
"QV DigitalCamera",
US_SC_8070, US_PR_CB, NULL,
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
"Digimax 410",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/* Reported by Luciano Rocha <luciano@eurotux.com> */
UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
"Argosy",
"Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
"Argosy",
"Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
"Argosy",
"Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Flag will support Bulk devices which use a standards-violating 32-byte
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
* Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
*/
UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
"Grandtech",
"DC2MEGA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32),
/* Andrew Lunn <andrew@lunn.ch>
* PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
* on LUN 4.
* Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
*/
UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
"PanDigital",
"Photo Frame",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
"X1DE-USB",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
/* Submitted by Dylan Taft <d13f00l@gmail.com>
* US_FL_IGNORE_RESIDUE Needed
*/
UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
"AIPTEK",
"Aiptek USB Keychain MP3 Player",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
* One example is "Trumpion Digital Research MYMP3".
* Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
*/
UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
"Trumpion",
"t33520 USB Flash Card Controller",
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Reported by Filippo Bardelli <filibard@libero.it>
* The device reports a subclass of RBC, which is wrong.
*/
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
"Trumpion Microelectronics, Inc.",
"33520 USB Digital Voice Recorder",
US_SC_UFI, US_PR_DEVICE, NULL,
0),
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",
"MP3 player",
US_SC_RBC, US_PR_BULK, NULL,
0 ),
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
"5-in-1 Card Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
* Tested on Rev. 10.00 (0x1000)
* Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
*/
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
"Pentax",
"Optio 2/3/400",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* These are virtual windows driver CDs, which the zd1211rw driver
* automatically converts into WLAN devices. */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
"ZyXEL",
"G-220F USB-WLAN Install",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
"SiteCom",
"WL-117 USB-WLAN Install",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
/* Reported by Dan Williams <dcbw@redhat.com>
* Option N.V. mobile broadband modems
* Ignore driver CD mode and force into modem mode by default.
*/
/* iCON 225 */
UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
"Option N.V.",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
0),
/* Reported by F. Aben <f.aben@option.com>
* This device (wrongly) has a vendor-specific device descriptor.
* The entry is needed so usb-storage can bind to it's mass-storage
* interface as an interface driver */
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
"Option",
"GI 0401 SD-Card",
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
/* Reported by Jan Dumon <j.dumon@option.com>
* This device (wrongly) has a vendor-specific device descriptor.
* The entry is needed so usb-storage can bind to it's mass-storage
* interface as an interface driver */
UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
"Option",
"GI 0431 SD-Card",
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
"Seagate",
"FreeAgent Pro",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
"Maxtor",
"USB to SATA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE),
/*
* Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
* The device blatantly ignores LUN and returns 1 in GetMaxLUN.
*/
UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
"Unknown",
"Unknown",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Joris Struyve <joris@struyve.be> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
"Medion",
"MD 7425",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/*
* Entry for Jenoptik JD 5200z3
*
* email: car.busse@gmx.de
*/
UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
"Jenoptik",
"JD 5200 z3",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Reported by Jason Johnston <killean@shaw.ca> */
UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
"Macpower Technology Co.LTD.",
"USB 2.0 3.5\" DEVICE",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported by Lubomir Blaha <tritol@trilogic.cz>
* I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
* works for me. Can anybody correct these values? (I able to test corrected
* version.)
*/
UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
"Netac",
"USB-CF-Card",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Reported by Edward Chapman (taken from linux-usb mailing list)
Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
"Netac",
"USB Flash Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Patch by Stephan Walter <stephan.walter@epfl.ch>
* I don't know why, but it works... */
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
"WINWARD",
"Music Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
"PNP_MP3",
"PNP_MP3 PLAYER",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
"Cowon Systems",
"iAUDIO M5",
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
"USB",
"Solid state disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Daniel Drake <dsd@gentoo.org>
* Reported by dayul on the Gentoo Forums */
UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
"Ours Technology",
"Flash Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
"USB",
"Flash Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Benjamin Schiller <sbenni@gmx.de>
* It is also sold by Easylite as DJ 20 */
UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
"Typhoon",
"My DJ 1820",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
/* Patch by Leonid Petrov mail at lpetrov.net
* Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
* http://www.qbik.ch/usb/devices/showdev.php?id=1705
* Updated to 103 device by MJ Ray mjr at phonecoop.coop
*/
UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
"Oracom Co., Ltd",
"ORC-200M",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* David Kuehling <dvdkhlng@gmx.de>:
* for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
* errors when trying to write.
*/
UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
"C-MEX",
"A-VOX",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Jeremy Katz <katzj@redhat.com>:
* The Blackberry Pearl can run in two modes; a usb-storage only mode
* and a mode that allows access via mass storage and to its database.
* The berry_charge module will set the device to dual mode and thus we
* should ignore its native mode if that module is built
*/
#ifdef CONFIG_USB_BERRY_CHARGE
UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001,
"RIM",
"Blackberry Pearl",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
#endif
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
"V800-Vodafone 802",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
/* Reported by The Solutor <thesolutor@gmail.com> */
UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
"Sony Ericsson",
"MD400",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE),
/* Reported by Jan Mate <mate@fiit.stuba.sk>
* and by Soeren Sonnenburg <kernel@nn7.de> */
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
"Sony Ericsson",
"P990i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
"Sony Ericsson",
"M600i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
"Sony Ericsson",
"P1i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
* Devices with bcd > 110 seem to not need it while those
* with bcd < 110 appear to need it.
*/
UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
"Western Digital",
"External HDD",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE),
/* Reported by Fabio Venturi <f.venturi@tdnet.it>
* The device reports a vendor-specific bDeviceClass.
*/
UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
"Actions Semiconductor",
"Mtp device",
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
* device.
*/
UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
"Sierra Wireless",
"USB MMC Storage",
US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
0),
/* Reported by Jaco Kroon <jaco@kroon.co.za>
* The usb-storage module found on the Digitech GNX4 (and supposedly other
* devices) misbehaves and causes a bunch of invalid I/O errors.
*/
UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
"Digitech HMG",
"DigiTech Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
"Dimage Z10",
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
"SWISSBIT",
"Black Silver",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Francesco Foresti <frafore@tiscali.it> */
UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
"Super Top",
"IDE DEVICE",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
* JMicron responds to USN and several other SCSI ioctls with a
* residue that causes subsequent I/O requests to fail. */
UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
"JMicron",
"USB to ATA/ATAPI Bridge",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
"Teac",
"HD-35PUK-B",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
"ST",
"2A",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
"Motorola",
"RAZR V3x",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/*
* Patch by Constantin Baranov <const@tltsu.ru>
* Report by Andreas Koenecke.
* Motorola ROKR Z6.
*/
UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
"Motorola",
"MSnc.",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
"MPIO",
"HS200",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
"INTOVA",
"Pixtreme",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
"Mitac",
"Mio DigiWalker USB Sync",
US_SC_DEVICE,US_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
"MP3 T10",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/*
* David Härdeman <david@2gen.com>
* The key makes the SCSI stack print confusing (but harmless) messages
*/
UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
"Iomega",
"Micro Mini 1GB",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
"DataStor",
"USB4500 FW1.04",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
/* Control/Bulk/Interrupt transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
/* Bulk-only transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
Reference in New Issue View Git Blame Copy Permalink