OpenE2K
/
qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
qemu-e2k/hw/acpi/Kconfig

74 lines
1012 B
Plaintext
Raw Normal View History

kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
config ACPI
bool
config ACPI_X86
bool
i386: express dependencies with Kconfig This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:10 +01:00
select ACPI
i386-softmmu.mak: remove all CONFIG_* except boards definitions %-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:16 +01:00
select ACPI_NVDIMM
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 16:40:49 +02:00
select ACPI_CXL
i386-softmmu.mak: remove all CONFIG_* except boards definitions %-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:16 +01:00
select ACPI_CPU_HOTPLUG
select ACPI_MEMORY_HOTPLUG
hmat acpi: Build Memory Proximity Domain Attributes Structure(s) HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table (HMAT). The specification references below link: http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf It describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain. The software is expected to use this information as hint for optimization. This structure describes Memory Proximity Domain Attributes by memory subsystem and its associativity with processor proximity domain as well as hint for memory usage. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-5-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-13 02:19:25 +01:00
select ACPI_HMAT
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 09:14:09 +02:00
select ACPI_PIIX4
select ACPI_PCIHP
ACPI ERST: support for ACPI ERST feature This implements a PCI device for ACPI ERST. This implements the non-NVRAM "mode" of operation for ERST as it is supported by Linux and Windows. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-28 21:38:04 +01:00
select ACPI_ERST
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
config ACPI_X86_ICH
bool
i386: express dependencies with Kconfig This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:10 +01:00
select ACPI_X86
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
config ACPI_CPU_HOTPLUG
bool
config ACPI_MEMORY_HOTPLUG
bool
i386: express dependencies with Kconfig This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:10 +01:00
select MEM_DEVICE
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
config ACPI_NVDIMM
bool
i386-softmmu.mak: remove all CONFIG_* except boards definitions %-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:16 +01:00
depends on ACPI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 09:14:09 +02:00
config ACPI_PIIX4
bool
depends on ACPI
config ACPI_PCIHP
bool
depends on ACPI
hmat acpi: Build Memory Proximity Domain Attributes Structure(s) HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table (HMAT). The specification references below link: http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf It describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain. The software is expected to use this information as hint for optimization. This structure describes Memory Proximity Domain Attributes by memory subsystem and its associativity with processor proximity domain as well as hint for memory usage. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-5-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-13 02:19:25 +01:00
config ACPI_HMAT
bool
depends on ACPI
ACPI: Build related register address fields via hardware error fw_cfg blob This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-12 05:06:03 +02:00
config ACPI_APEI
bool
depends on ACPI
hw/acpi: Consolidate build_mcfg to pci.c Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-21 08:28:35 +02:00
config ACPI_PCI
bool
depends on ACPI && PCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:00 +01:00
config ACPI_VMGENID
bool
i386-softmmu.mak: remove all CONFIG_* except boards definitions %-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 07:56:16 +01:00
default y
depends on PC
hw/acpi: Add ACPI Generic Event Device Support The ACPI Generic Event Device (GED) is a hardware-reduced specific device[ACPI v6.1 Section 5.6.9] that handles all platform events, including the hotplug ones. This patch generates the AML code that defines GEDs. Platforms need to specify their own GED Event bitmap to describe what kind of events they want to support through GED. Also this uses a a single interrupt for the GED device, relying on IO memory region to communicate the type of device affected by the interrupt. This way, we can support up to 32 events with a unique interrupt. This supports only memory hotplug for now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-09-18 15:06:25 +02:00
hw/acpi: Add VIOT table Add a function that generates a Virtual I/O Translation table (VIOT), describing the topology of paravirtual IOMMUs. The table is created if a virtio-iommu device is present. It contains a virtio-iommu node and PCI Range nodes for endpoints managed by the IOMMU. By default, a single node describes all PCI devices. When passing the "default_bus_bypass_iommu" machine option and "bypass_iommu" PXB option, only buses that do not bypass the IOMMU are described by PCI Range nodes. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-Id: <20211026182024.2642038-2-jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-26 20:20:20 +02:00
config ACPI_VIOT
bool
depends on ACPI
hw/acpi: Add ACPI Generic Event Device Support The ACPI Generic Event Device (GED) is a hardware-reduced specific device[ACPI v6.1 Section 5.6.9] that handles all platform events, including the hotplug ones. This patch generates the AML code that defines GEDs. Platforms need to specify their own GED Event bitmap to describe what kind of events they want to support through GED. Also this uses a a single interrupt for the GED device, relying on IO memory region to communicate the type of device affected by the interrupt. This way, we can support up to 32 events with a unique interrupt. This supports only memory hotplug for now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-09-18 15:06:25 +02:00
config ACPI_HW_REDUCED
hw/acpi/Kconfig: Add missing Kconfig dependencies (build error) The 'microvm' machine misses various dependencies: /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:247: undefined reference to `acpi_build_tables_init' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:192: undefined reference to `bios_linker_loader_alloc' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:121: undefined reference to `init_aml_allocator' /usr/bin/ld: hw/i386/acpi-microvm.c:124: undefined reference to `acpi_data_push' /usr/bin/ld: hw/i386/acpi-microvm.c:126: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:129: undefined reference to `build_ged_aml' /usr/bin/ld: hw/i386/acpi-microvm.c:131: undefined reference to `acpi_dsdt_add_power_button' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_virtio': hw/i386/acpi-microvm.c:77: undefined reference to `aml_string' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:138: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:149: undefined reference to `build_header' /usr/bin/ld: hw/i386/acpi-microvm.c:152: undefined reference to `free_aml_allocator' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:202: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:203: undefined reference to `build_fadt' /usr/bin/ld: hw/i386/acpi-microvm.c:206: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:207: undefined reference to `acpi_build_madt' /usr/bin/ld: hw/i386/acpi-microvm.c:212: undefined reference to `build_xsdt' /usr/bin/ld: hw/i386/acpi-microvm.c:224: undefined reference to `build_rsdp' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:251: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:253: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:255: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:258: undefined reference to `acpi_build_tables_cleanup' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_pci': hw/i386/acpi-microvm.c:105: undefined reference to `acpi_dsdt_add_gpex' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. Update the ACPI_HW_REDUCED symbol to select ACPI_MEMORY_HOTPLUG / ACPI_NVDIMM / ACPI. Fixes: 8045df14bcc ("microvm/acpi: add minimal acpi support") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210616204328.2611406-23-philmd@redhat.com>
2021-05-21 15:53:57 +02:00
bool
select ACPI
select ACPI_MEMORY_HOTPLUG
select ACPI_NVDIMM
ACPI ERST: support for ACPI ERST feature This implements a PCI device for ACPI ERST. This implements the non-NVRAM "mode" of operation for ERST as it is supported by Linux and Windows. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-28 21:38:04 +01:00
config ACPI_ERST
bool
default y
depends on ACPI && PCI
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 16:40:49 +02:00
config ACPI_CXL
bool
depends on ACPI