qemu-e2k/hw/usb/dev-storage.c

803 lines
23 KiB
C
Raw Normal View History

/*
* USB Mass Storage Device emulation
*
* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the LGPL.
*/
#include "qemu/osdep.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "hw/usb.h"
#include "desc.h"
#include "hw/qdev-properties.h"
#include "hw/scsi/scsi.h"
#include "migration/vmstate.h"
#include "sysemu/sysemu.h"
#include "sysemu/block-backend.h"
#include "qapi/visitor.h"
#include "qemu/cutils.h"
//#define DEBUG_MSD
#ifdef DEBUG_MSD
#define DPRINTF(fmt, ...) \
do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...) do {} while(0)
#endif
/* USB requests. */
#define MassStorageReset 0xff
#define GetMaxLun 0xfe
enum USBMSDMode {
USB_MSDM_CBW, /* Command Block. */
USB_MSDM_DATAOUT, /* Transfer data to device. */
USB_MSDM_DATAIN, /* Transfer data from device. */
USB_MSDM_CSW /* Command Status. */
};
struct usb_msd_csw {
uint32_t sig;
uint32_t tag;
uint32_t residue;
uint8_t status;
};
typedef struct {
USBDevice dev;
enum USBMSDMode mode;
uint32_t scsi_off;
uint32_t scsi_len;
uint32_t data_len;
struct usb_msd_csw csw;
SCSIRequest *req;
SCSIBus bus;
/* For async completion. */
USBPacket *packet;
/* usb-storage only */
block: add topology qdev properties Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 23:37:09 +01:00
BlockConf conf;
uint32_t removable;
SCSIDevice *scsi_dev;
} MSDState;
#define TYPE_USB_STORAGE "usb-storage-dev"
#define USB_STORAGE_DEV(obj) OBJECT_CHECK(MSDState, (obj), TYPE_USB_STORAGE)
struct usb_msd_cbw {
uint32_t sig;
uint32_t tag;
uint32_t data_len;
uint8_t flags;
uint8_t lun;
uint8_t cmd_len;
uint8_t cmd[16];
};
enum {
STR_MANUFACTURER = 1,
STR_PRODUCT,
STR_SERIALNUMBER,
STR_CONFIG_FULL,
STR_CONFIG_HIGH,
STR_CONFIG_SUPER,
};
static const USBDescStrings desc_strings = {
[STR_MANUFACTURER] = "QEMU",
[STR_PRODUCT] = "QEMU USB HARDDRIVE",
[STR_SERIALNUMBER] = "1",
[STR_CONFIG_FULL] = "Full speed config (usb 1.1)",
[STR_CONFIG_HIGH] = "High speed config (usb 2.0)",
[STR_CONFIG_SUPER] = "Super speed config (usb 3.0)",
};
static const USBDescIface desc_iface_full = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 64,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 64,
},
}
};
static const USBDescDevice desc_device_full = {
.bcdUSB = 0x0200,
.bMaxPacketSize0 = 8,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_FULL,
.bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
.nif = 1,
.ifs = &desc_iface_full,
},
},
};
static const USBDescIface desc_iface_high = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 512,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 512,
},
}
};
static const USBDescDevice desc_device_high = {
.bcdUSB = 0x0200,
.bMaxPacketSize0 = 64,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_HIGH,
.bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
.nif = 1,
.ifs = &desc_iface_high,
},
},
};
static const USBDescIface desc_iface_super = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 1024,
.bMaxBurst = 15,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 1024,
.bMaxBurst = 15,
},
}
};
static const USBDescDevice desc_device_super = {
.bcdUSB = 0x0300,
.bMaxPacketSize0 = 9,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_SUPER,
.bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
.nif = 1,
.ifs = &desc_iface_super,
},
},
};
static const USBDesc desc = {
.id = {
.idVendor = 0x46f4, /* CRC16() of "QEMU" */
.idProduct = 0x0001,
.bcdDevice = 0,
.iManufacturer = STR_MANUFACTURER,
.iProduct = STR_PRODUCT,
.iSerialNumber = STR_SERIALNUMBER,
},
.full = &desc_device_full,
.high = &desc_device_high,
.super = &desc_device_super,
.str = desc_strings,
};
static void usb_msd_copy_data(MSDState *s, USBPacket *p)
{
uint32_t len;
len = p->iov.size - p->actual_length;
if (len > s->scsi_len)
len = s->scsi_len;
usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len);
s->scsi_len -= len;
s->scsi_off += len;
if (len > s->data_len) {
len = s->data_len;
}
s->data_len -= len;
if (s->scsi_len == 0 || s->data_len == 0) {
scsi_req_continue(s->req);
}
}
static void usb_msd_send_status(MSDState *s, USBPacket *p)
{
int len;
DPRINTF("Command status %d tag 0x%x, len %zd\n",
s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
assert(s->csw.sig == cpu_to_le32(0x53425355));
len = MIN(sizeof(s->csw), p->iov.size);
usb_packet_copy(p, &s->csw, len);
memset(&s->csw, 0, sizeof(s->csw));
}
static void usb_msd_packet_complete(MSDState *s)
{
USBPacket *p = s->packet;
/* Set s->packet to NULL before calling usb_packet_complete
because another request may be issued before
usb_packet_complete returns. */
DPRINTF("Packet complete %p\n", p);
s->packet = NULL;
usb_packet_complete(&s->dev, p);
}
static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
USBPacket *p = s->packet;
assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
s->scsi_len = len;
s->scsi_off = 0;
if (p) {
usb_msd_copy_data(s, p);
p = s->packet;
if (p && p->actual_length == p->iov.size) {
p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
usb_msd_packet_complete(s);
}
}
}
static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t resid)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
USBPacket *p = s->packet;
DPRINTF("Command complete %d tag 0x%x\n", status, req->tag);
s->csw.sig = cpu_to_le32(0x53425355);
s->csw.tag = cpu_to_le32(req->tag);
s->csw.residue = cpu_to_le32(s->data_len);
s->csw.status = status != 0;
if (s->packet) {
if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
/* A deferred packet with no write data remaining must be
the status read packet. */
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
} else if (s->mode == USB_MSDM_CSW) {
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
} else {
if (s->data_len) {
int len = (p->iov.size - p->actual_length);
usb_packet_skip(p, len);
if (len > s->data_len) {
len = s->data_len;
}
s->data_len -= len;
}
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
usb_msd_packet_complete(s);
} else if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
scsi_req_unref(req);
s->req = NULL;
}
static void usb_msd_request_cancelled(SCSIRequest *req)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
if (req == s->req) {
scsi_req_unref(s->req);
s->req = NULL;
s->scsi_len = 0;
}
}
static void usb_msd_handle_reset(USBDevice *dev)
{
MSDState *s = (MSDState *)dev;
DPRINTF("Reset\n");
if (s->req) {
scsi_req_cancel(s->req);
}
assert(s->req == NULL);
if (s->packet) {
s->packet->status = USB_RET_STALL;
usb_msd_packet_complete(s);
}
s->mode = USB_MSDM_CBW;
}
static void usb_msd_handle_control(USBDevice *dev, USBPacket *p,
int request, int value, int index, int length, uint8_t *data)
{
MSDState *s = (MSDState *)dev;
SCSIDevice *scsi_dev;
int ret, maxlun;
ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return;
}
switch (request) {
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
break;
/* Class specific requests. */
case ClassInterfaceOutRequest | MassStorageReset:
/* Reset state ready for the next CBW. */
s->mode = USB_MSDM_CBW;
break;
case ClassInterfaceRequest | GetMaxLun:
maxlun = 0;
for (;;) {
scsi_dev = scsi_device_find(&s->bus, 0, 0, maxlun+1);
if (scsi_dev == NULL) {
break;
}
if (scsi_dev->lun != maxlun+1) {
break;
}
maxlun++;
}
DPRINTF("MaxLun %d\n", maxlun);
data[0] = maxlun;
p->actual_length = 1;
break;
default:
p->status = USB_RET_STALL;
break;
}
}
static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
{
MSDState *s = USB_STORAGE_DEV(dev);
assert(s->packet == p);
s->packet = NULL;
if (s->req) {
scsi_req_cancel(s->req);
}
}
static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
{
MSDState *s = (MSDState *)dev;
uint32_t tag;
struct usb_msd_cbw cbw;
uint8_t devep = p->ep->nr;
SCSIDevice *scsi_dev;
uint32_t len;
switch (p->pid) {
case USB_TOKEN_OUT:
if (devep != 2)
goto fail;
switch (s->mode) {
case USB_MSDM_CBW:
if (p->iov.size != 31) {
error_report("usb-msd: Bad CBW size");
goto fail;
}
usb_packet_copy(p, &cbw, 31);
if (le32_to_cpu(cbw.sig) != 0x43425355) {
error_report("usb-msd: Bad signature %08x",
le32_to_cpu(cbw.sig));
goto fail;
}
DPRINTF("Command on LUN %d\n", cbw.lun);
scsi_dev = scsi_device_find(&s->bus, 0, 0, cbw.lun);
if (scsi_dev == NULL) {
error_report("usb-msd: Bad LUN %d", cbw.lun);
goto fail;
}
tag = le32_to_cpu(cbw.tag);
s->data_len = le32_to_cpu(cbw.data_len);
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
} else if (cbw.flags & 0x80) {
s->mode = USB_MSDM_DATAIN;
} else {
s->mode = USB_MSDM_DATAOUT;
}
DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
tag, cbw.flags, cbw.cmd_len, s->data_len);
assert(le32_to_cpu(s->csw.residue) == 0);
s->scsi_len = 0;
s->req = scsi_req_new(scsi_dev, tag, cbw.lun, cbw.cmd, NULL);
#ifdef DEBUG_MSD
scsi_req_print(s->req);
#endif
len = scsi_req_enqueue(s->req);
if (len) {
scsi_req_continue(s->req);
}
break;
case USB_MSDM_DATAOUT:
DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
if (p->iov.size > s->data_len) {
goto fail;
}
if (s->scsi_len) {
usb_msd_copy_data(s, p);
}
if (le32_to_cpu(s->csw.residue)) {
int len = p->iov.size - p->actual_length;
if (len) {
usb_packet_skip(p, len);
if (len > s->data_len) {
len = s->data_len;
}
s->data_len -= len;
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
}
if (p->actual_length < p->iov.size) {
DPRINTF("Deferring packet %p [wait data-out]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
}
break;
default:
DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
goto fail;
}
break;
case USB_TOKEN_IN:
if (devep != 1)
goto fail;
switch (s->mode) {
case USB_MSDM_DATAOUT:
if (s->data_len != 0 || p->iov.size < 13) {
goto fail;
}
/* Waiting for SCSI write to complete. */
s->packet = p;
p->status = USB_RET_ASYNC;
break;
case USB_MSDM_CSW:
if (p->iov.size < 13) {
goto fail;
}
if (s->req) {
/* still in flight */
DPRINTF("Deferring packet %p [wait status]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
} else {
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
}
break;
case USB_MSDM_DATAIN:
DPRINTF("Data in %zd/%d, scsi_len %d\n",
p->iov.size, s->data_len, s->scsi_len);
if (s->scsi_len) {
usb_msd_copy_data(s, p);
}
if (le32_to_cpu(s->csw.residue)) {
int len = p->iov.size - p->actual_length;
if (len) {
usb_packet_skip(p, len);
if (len > s->data_len) {
len = s->data_len;
}
s->data_len -= len;
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
}
if (p->actual_length < p->iov.size && s->mode == USB_MSDM_DATAIN) {
DPRINTF("Deferring packet %p [wait data-in]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
}
break;
default:
DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
goto fail;
}
break;
default:
DPRINTF("Bad token\n");
fail:
p->status = USB_RET_STALL;
break;
}
}
static void *usb_msd_load_request(QEMUFile *f, SCSIRequest *req)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
/* nothing to load, just store req in our state struct */
assert(s->req == NULL);
scsi_req_ref(req);
s->req = req;
return NULL;
}
static const struct SCSIBusInfo usb_msd_scsi_info_storage = {
.tcq = false,
.max_target = 0,
.max_lun = 0,
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
.cancel = usb_msd_request_cancelled,
.load_request = usb_msd_load_request,
};
static const struct SCSIBusInfo usb_msd_scsi_info_bot = {
.tcq = false,
.max_target = 0,
.max_lun = 15,
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
.cancel = usb_msd_request_cancelled,
.load_request = usb_msd_load_request,
};
static void usb_msd_storage_realize(USBDevice *dev, Error **errp)
{
MSDState *s = USB_STORAGE_DEV(dev);
BlockBackend *blk = s->conf.blk;
SCSIDevice *scsi_dev;
if (!blk) {
error_setg(errp, "drive property not set");
return;
}
if (!blkconf_blocksizes(&s->conf, errp)) {
return;
}
if (!blkconf_apply_backend_options(&s->conf, blk_is_read_only(blk), true,
errp)) {
return;
}
/*
* Hack alert: this pretends to be a block device, but it's really
* a SCSI bus that can serve only a single device, which it
* creates automatically. But first it needs to detach from its
* blockdev, or else scsi_bus_legacy_add_drive() dies when it
* attaches again. We also need to take another reference so that
* blk_detach_dev() doesn't free blk while we still need it.
*
* The hack is probably a bad idea.
*/
blk_ref(blk);
blk_detach_dev(blk, DEVICE(s));
s->conf.blk = NULL;
usb_desc_create_serial(dev);
usb_desc_init(dev);
scsi_bus_new(&s->bus, sizeof(s->bus), DEVICE(dev),
&usb_msd_scsi_info_storage, NULL);
scsi_dev = scsi_bus_legacy_add_drive(&s->bus, blk, 0, !!s->removable,
s->conf.bootindex, s->conf.share_rw,
s->conf.rerror, s->conf.werror,
dev->serial,
errp);
blk_unref(blk);
if (!scsi_dev) {
return;
}
usb_msd_handle_reset(dev);
s->scsi_dev = scsi_dev;
}
static void usb_msd_bot_realize(USBDevice *dev, Error **errp)
{
MSDState *s = USB_STORAGE_DEV(dev);
DeviceState *d = DEVICE(dev);
usb_desc_create_serial(dev);
usb_desc_init(dev);
if (d->hotplugged) {
s->dev.auto_attach = 0;
}
scsi_bus_new(&s->bus, sizeof(s->bus), DEVICE(dev),
&usb_msd_scsi_info_bot, NULL);
usb_msd_handle_reset(dev);
}
static const VMStateDescription vmstate_usb_msd = {
.name = "usb-storage",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_USB_DEVICE(dev, MSDState),
VMSTATE_UINT32(mode, MSDState),
VMSTATE_UINT32(scsi_len, MSDState),
VMSTATE_UINT32(scsi_off, MSDState),
VMSTATE_UINT32(data_len, MSDState),
VMSTATE_UINT32(csw.sig, MSDState),
VMSTATE_UINT32(csw.tag, MSDState),
VMSTATE_UINT32(csw.residue, MSDState),
VMSTATE_UINT8(csw.status, MSDState),
VMSTATE_END_OF_LIST()
}
};
static Property msd_properties[] = {
DEFINE_BLOCK_PROPERTIES(MSDState, conf),
DEFINE_BLOCK_ERROR_PROPERTIES(MSDState, conf),
DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
DEFINE_PROP_END_OF_LIST(),
};
static void usb_msd_class_initfn_common(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->product_desc = "QEMU USB MSD";
uc->usb_desc = &desc;
uc->cancel_packet = usb_msd_cancel_io;
uc->handle_attach = usb_desc_attach;
uc->handle_reset = usb_msd_handle_reset;
uc->handle_control = usb_msd_handle_control;
uc->handle_data = usb_msd_handle_data;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
dc->fw_name = "storage";
dc->vmsd = &vmstate_usb_msd;
}
static void usb_msd_class_storage_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->realize = usb_msd_storage_realize;
device_class_set_props(dc, msd_properties);
}
static void usb_msd_get_bootindex(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
USBDevice *dev = USB_DEVICE(obj);
MSDState *s = USB_STORAGE_DEV(dev);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_int32(v, name, &s->conf.bootindex, errp);
}
static void usb_msd_set_bootindex(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
USBDevice *dev = USB_DEVICE(obj);
MSDState *s = USB_STORAGE_DEV(dev);
int32_t boot_index;
Error *local_err = NULL;
if (!visit_type_int32(v, name, &boot_index, errp)) {
return;
}
/* check whether bootindex is present in fw_boot_order list */
check_boot_index(boot_index, &local_err);
if (local_err) {
goto out;
}
/* change bootindex to a new one */
s->conf.bootindex = boot_index;
if (s->scsi_dev) {
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(s->scsi_dev), "bootindex", boot_index,
&error_abort);
}
out:
error_propagate(errp, local_err);
}
static const TypeInfo usb_storage_dev_type_info = {
.name = TYPE_USB_STORAGE,
.parent = TYPE_USB_DEVICE,
.instance_size = sizeof(MSDState),
.abstract = true,
.class_init = usb_msd_class_initfn_common,
};
static void usb_msd_instance_init(Object *obj)
{
object_property_add(obj, "bootindex", "int32",
usb_msd_get_bootindex,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
usb_msd_set_bootindex, NULL, NULL);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(obj, "bootindex", -1, NULL);
}
static void usb_msd_class_bot_initfn(ObjectClass *klass, void *data)
{
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->realize = usb_msd_bot_realize;
uc->attached_settable = true;
}
static const TypeInfo msd_info = {
.name = "usb-storage",
.parent = TYPE_USB_STORAGE,
.class_init = usb_msd_class_storage_initfn,
.instance_init = usb_msd_instance_init,
};
static const TypeInfo bot_info = {
.name = "usb-bot",
.parent = TYPE_USB_STORAGE,
.class_init = usb_msd_class_bot_initfn,
};
static void usb_msd_register_types(void)
{
type_register_static(&usb_storage_dev_type_info);
type_register_static(&msd_info);
type_register_static(&bot_info);
}
type_init(usb_msd_register_types)