qemu-e2k/hw/acpi/ich9.c

507 lines
16 KiB
C
Raw Normal View History

/*
* ACPI implementation
*
* Copyright (c) 2006 Fabrice Bellard
* Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
* VA Linux Systems Japan K.K.
* Copyright (C) 2012 Jason Baron <jbaron@redhat.com>
*
* This is based on acpi.c.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "hw/i386/pc.h"
#include "hw/pci/pci.h"
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/tco.h"
#include "sysemu/kvm.h"
#include "exec/address-spaces.h"
#include "hw/i386/ich9.h"
#include "hw/mem/pc-dimm.h"
//#define DEBUG
#ifdef DEBUG
#define ICH9_DEBUG(fmt, ...) \
do { printf("%s "fmt, __func__, ## __VA_ARGS__); } while (0)
#else
#define ICH9_DEBUG(fmt, ...) do { } while (0)
#endif
static void ich9_pm_update_sci_fn(ACPIREGS *regs)
{
ICH9LPCPMRegs *pm = container_of(regs, ICH9LPCPMRegs, acpi_regs);
acpi_update_sci(&pm->acpi_regs, pm->irq);
}
static uint64_t ich9_gpe_readb(void *opaque, hwaddr addr, unsigned width)
{
ICH9LPCPMRegs *pm = opaque;
return acpi_gpe_ioport_readb(&pm->acpi_regs, addr);
}
static void ich9_gpe_writeb(void *opaque, hwaddr addr, uint64_t val,
unsigned width)
{
ICH9LPCPMRegs *pm = opaque;
acpi_gpe_ioport_writeb(&pm->acpi_regs, addr, val);
acpi_update_sci(&pm->acpi_regs, pm->irq);
}
static const MemoryRegionOps ich9_gpe_ops = {
.read = ich9_gpe_readb,
.write = ich9_gpe_writeb,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.impl.min_access_size = 1,
.impl.max_access_size = 1,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t ich9_smi_readl(void *opaque, hwaddr addr, unsigned width)
{
ICH9LPCPMRegs *pm = opaque;
switch (addr) {
case 0:
return pm->smi_en;
case 4:
return pm->smi_sts;
default:
return 0;
}
}
static void ich9_smi_writel(void *opaque, hwaddr addr, uint64_t val,
unsigned width)
{
ICH9LPCPMRegs *pm = opaque;
TCOIORegs *tr = &pm->tco_regs;
uint64_t tco_en;
switch (addr) {
case 0:
tco_en = pm->smi_en & ICH9_PMIO_SMI_EN_TCO_EN;
/* once TCO_LOCK bit is set, TCO_EN bit cannot be overwritten */
if (tr->tco.cnt1 & TCO_LOCK) {
val = (val & ~ICH9_PMIO_SMI_EN_TCO_EN) | tco_en;
}
pm->smi_en &= ~pm->smi_en_wmask;
pm->smi_en |= (val & pm->smi_en_wmask);
break;
}
}
static const MemoryRegionOps ich9_smi_ops = {
.read = ich9_smi_readl,
.write = ich9_smi_writel,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
.endianness = DEVICE_LITTLE_ENDIAN,
};
void ich9_pm_iospace_update(ICH9LPCPMRegs *pm, uint32_t pm_io_base)
{
ICH9_DEBUG("to 0x%x\n", pm_io_base);
assert((pm_io_base & ICH9_PMIO_MASK) == 0);
pm->pm_io_base = pm_io_base;
memory_region_transaction_begin();
memory_region_set_enabled(&pm->io, pm->pm_io_base != 0);
memory_region_set_address(&pm->io, pm->pm_io_base);
memory_region_transaction_commit();
}
static int ich9_pm_post_load(void *opaque, int version_id)
{
ICH9LPCPMRegs *pm = opaque;
uint32_t pm_io_base = pm->pm_io_base;
pm->pm_io_base = 0;
ich9_pm_iospace_update(pm, pm_io_base);
return 0;
}
#define VMSTATE_GPE_ARRAY(_field, _state) \
{ \
.name = (stringify(_field)), \
.version_id = 0, \
.num = ICH9_PMIO_GPE0_LEN, \
.info = &vmstate_info_uint8, \
.size = sizeof(uint8_t), \
.flags = VMS_ARRAY | VMS_POINTER, \
.offset = vmstate_offset_pointer(_state, _field, uint8_t), \
}
static bool vmstate_test_use_memhp(void *opaque)
{
ICH9LPCPMRegs *s = opaque;
return s->acpi_memory_hotplug.is_enabled;
}
static const VMStateDescription vmstate_memhp_state = {
.name = "ich9_pm/memhp",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.needed = vmstate_test_use_memhp,
.fields = (VMStateField[]) {
VMSTATE_MEMORY_HOTPLUG(acpi_memory_hotplug, ICH9LPCPMRegs),
VMSTATE_END_OF_LIST()
}
};
static bool vmstate_test_use_tco(void *opaque)
{
ICH9LPCPMRegs *s = opaque;
return s->enable_tco;
}
static const VMStateDescription vmstate_tco_io_state = {
.name = "ich9_pm/tco",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.needed = vmstate_test_use_tco,
.fields = (VMStateField[]) {
VMSTATE_STRUCT(tco_regs, ICH9LPCPMRegs, 1, vmstate_tco_io_sts,
TCOIORegs),
VMSTATE_END_OF_LIST()
}
};
const VMStateDescription vmstate_ich9_pm = {
.name = "ich9_pm",
.version_id = 1,
.minimum_version_id = 1,
.post_load = ich9_pm_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT16(acpi_regs.pm1.evt.sts, ICH9LPCPMRegs),
VMSTATE_UINT16(acpi_regs.pm1.evt.en, ICH9LPCPMRegs),
VMSTATE_UINT16(acpi_regs.pm1.cnt.cnt, ICH9LPCPMRegs),
VMSTATE_TIMER_PTR(acpi_regs.tmr.timer, ICH9LPCPMRegs),
VMSTATE_INT64(acpi_regs.tmr.overflow_time, ICH9LPCPMRegs),
VMSTATE_GPE_ARRAY(acpi_regs.gpe.sts, ICH9LPCPMRegs),
VMSTATE_GPE_ARRAY(acpi_regs.gpe.en, ICH9LPCPMRegs),
VMSTATE_UINT32(smi_en, ICH9LPCPMRegs),
VMSTATE_UINT32(smi_sts, ICH9LPCPMRegs),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&vmstate_memhp_state,
&vmstate_tco_io_state,
NULL
}
};
static void pm_reset(void *opaque)
{
ICH9LPCPMRegs *pm = opaque;
ich9_pm_iospace_update(pm, 0);
acpi_pm1_evt_reset(&pm->acpi_regs);
acpi_pm1_cnt_reset(&pm->acpi_regs);
acpi_pm_tmr_reset(&pm->acpi_regs);
acpi_gpe_reset(&pm->acpi_regs);
pm->smi_en = 0;
if (!pm->smm_enabled) {
/* Mark SMM as already inited to prevent SMM from running. */
pm->smi_en |= ICH9_PMIO_SMI_EN_APMC_EN;
}
pm->smi_en_wmask = ~0;
acpi_update_sci(&pm->acpi_regs, pm->irq);
}
static void pm_powerdown_req(Notifier *n, void *opaque)
{
ICH9LPCPMRegs *pm = container_of(n, ICH9LPCPMRegs, powerdown_notifier);
acpi_pm1_evt_power_down(&pm->acpi_regs);
}
void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs *pm,
bool smm_enabled,
qemu_irq sci_irq)
{
memory_region_init(&pm->io, OBJECT(lpc_pci), "ich9-pm", ICH9_PMIO_SIZE);
memory_region_set_enabled(&pm->io, false);
memory_region_add_subregion(pci_address_space_io(lpc_pci),
0, &pm->io);
acpi_pm_tmr_init(&pm->acpi_regs, ich9_pm_update_sci_fn, &pm->io);
acpi_pm1_evt_init(&pm->acpi_regs, ich9_pm_update_sci_fn, &pm->io);
acpi_pm1_cnt_init(&pm->acpi_regs, &pm->io, pm->disable_s3, pm->disable_s4,
pm->s4_val);
acpi_gpe_init(&pm->acpi_regs, ICH9_PMIO_GPE0_LEN);
memory_region_init_io(&pm->io_gpe, OBJECT(lpc_pci), &ich9_gpe_ops, pm,
"acpi-gpe0", ICH9_PMIO_GPE0_LEN);
memory_region_add_subregion(&pm->io, ICH9_PMIO_GPE0_STS, &pm->io_gpe);
memory_region_init_io(&pm->io_smi, OBJECT(lpc_pci), &ich9_smi_ops, pm,
"acpi-smi", 8);
memory_region_add_subregion(&pm->io, ICH9_PMIO_SMI_EN, &pm->io_smi);
pm->smm_enabled = smm_enabled;
pm->enable_tco = true;
acpi_pm_tco_init(&pm->tco_regs, &pm->io);
pm->irq = sci_irq;
qemu_register_reset(pm_reset, pm);
pm->powerdown_notifier.notify = pm_powerdown_req;
qemu_register_powerdown_notifier(&pm->powerdown_notifier);
legacy_acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci),
OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE);
if (pm->acpi_memory_hotplug.is_enabled) {
acpi_memory_hotplug_init(pci_address_space_io(lpc_pci), OBJECT(lpc_pci),
&pm->acpi_memory_hotplug);
}
}
static void ich9_pm_get_gpe0_blk(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
uint32_t value = pm->pm_io_base + ICH9_PMIO_GPE0_STS;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, errp);
}
static bool ich9_pm_get_memory_hotplug_support(Object *obj, Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
return s->pm.acpi_memory_hotplug.is_enabled;
}
static void ich9_pm_set_memory_hotplug_support(Object *obj, bool value,
Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
s->pm.acpi_memory_hotplug.is_enabled = value;
}
static bool ich9_pm_get_cpu_hotplug_legacy(Object *obj, Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
return s->pm.cpu_hotplug_legacy;
}
static void ich9_pm_set_cpu_hotplug_legacy(Object *obj, bool value,
Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
s->pm.cpu_hotplug_legacy = value;
}
static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
uint8_t value = pm->disable_s3;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, errp);
}
static void ich9_pm_set_disable_s3(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
Error *local_err = NULL;
uint8_t value;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, &local_err);
if (local_err) {
goto out;
}
pm->disable_s3 = value;
out:
error_propagate(errp, local_err);
}
static void ich9_pm_get_disable_s4(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
uint8_t value = pm->disable_s4;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, errp);
}
static void ich9_pm_set_disable_s4(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
Error *local_err = NULL;
uint8_t value;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, &local_err);
if (local_err) {
goto out;
}
pm->disable_s4 = value;
out:
error_propagate(errp, local_err);
}
static void ich9_pm_get_s4_val(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
uint8_t value = pm->s4_val;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, errp);
}
static void ich9_pm_set_s4_val(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ICH9LPCPMRegs *pm = opaque;
Error *local_err = NULL;
uint8_t value;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, &value, &local_err);
if (local_err) {
goto out;
}
pm->s4_val = value;
out:
error_propagate(errp, local_err);
}
static bool ich9_pm_get_enable_tco(Object *obj, Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
return s->pm.enable_tco;
}
static void ich9_pm_set_enable_tco(Object *obj, bool value, Error **errp)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
s->pm.enable_tco = value;
}
void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm, Error **errp)
{
static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN;
pm->acpi_memory_hotplug.is_enabled = true;
pm->cpu_hotplug_legacy = true;
pm->disable_s3 = 0;
pm->disable_s4 = 0;
pm->s4_val = 2;
object_property_add_uint32_ptr(obj, ACPI_PM_PROP_PM_IO_BASE,
&pm->pm_io_base, errp);
object_property_add(obj, ACPI_PM_PROP_GPE0_BLK, "uint32",
ich9_pm_get_gpe0_blk,
NULL, NULL, pm, NULL);
object_property_add_uint32_ptr(obj, ACPI_PM_PROP_GPE0_BLK_LEN,
&gpe0_len, errp);
object_property_add_bool(obj, "memory-hotplug-support",
ich9_pm_get_memory_hotplug_support,
ich9_pm_set_memory_hotplug_support,
NULL);
object_property_add_bool(obj, "cpu-hotplug-legacy",
ich9_pm_get_cpu_hotplug_legacy,
ich9_pm_set_cpu_hotplug_legacy,
NULL);
object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8",
ich9_pm_get_disable_s3,
ich9_pm_set_disable_s3,
NULL, pm, NULL);
object_property_add(obj, ACPI_PM_PROP_S4_DISABLED, "uint8",
ich9_pm_get_disable_s4,
ich9_pm_set_disable_s4,
NULL, pm, NULL);
object_property_add(obj, ACPI_PM_PROP_S4_VAL, "uint8",
ich9_pm_get_s4_val,
ich9_pm_set_s4_val,
NULL, pm, NULL);
object_property_add_bool(obj, ACPI_PM_PROP_TCO_ENABLED,
ich9_pm_get_enable_tco,
ich9_pm_set_enable_tco,
NULL);
}
void ich9_pm_device_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp)
{
ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
if (lpc->pm.acpi_memory_hotplug.is_enabled &&
object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
acpi_memory_plug_cb(hotplug_dev, &lpc->pm.acpi_memory_hotplug,
dev, errp);
} else if (lpc->pm.cpu_hotplug_legacy &&
object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
legacy_acpi_cpu_plug_cb(hotplug_dev, &lpc->pm.gpe_cpu, dev, errp);
} else {
error_setg(errp, "acpi: device plug request for not supported device"
" type: %s", object_get_typename(OBJECT(dev)));
}
}
void ich9_pm_device_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
if (lpc->pm.acpi_memory_hotplug.is_enabled &&
object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
acpi_memory_unplug_request_cb(hotplug_dev,
&lpc->pm.acpi_memory_hotplug, dev,
errp);
} else {
error_setg(errp, "acpi: device unplug request for not supported device"
" type: %s", object_get_typename(OBJECT(dev)));
}
}
void ich9_pm_device_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp)
{
ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
if (lpc->pm.acpi_memory_hotplug.is_enabled &&
object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
acpi_memory_unplug_cb(&lpc->pm.acpi_memory_hotplug, dev, errp);
} else {
error_setg(errp, "acpi: device unplug for not supported device"
" type: %s", object_get_typename(OBJECT(dev)));
}
}
void ich9_pm_ospm_status(AcpiDeviceIf *adev, ACPIOSTInfoList ***list)
{
ICH9LPCState *s = ICH9_LPC_DEVICE(adev);
acpi_memory_ospm_status(&s->pm.acpi_memory_hotplug, list);
}