qemu-e2k/include/qemu/osdep.h

217 lines
5.4 KiB
C
Raw Normal View History

#ifndef QEMU_OSDEP_H
#define QEMU_OSDEP_H
#include "config-host.h"
#include "qemu/compiler.h"
#include <stdarg.h>
#include <stddef.h>
#include <stdbool.h>
#include <stdint.h>
#include <sys/types.h>
#ifdef __OpenBSD__
#include <sys/signal.h>
#endif
#ifndef _WIN32
#include <sys/wait.h>
#else
#define WIFEXITED(x) 1
#define WEXITSTATUS(x) (x)
#endif
#include <sys/time.h>
#if defined(CONFIG_SOLARIS) && CONFIG_SOLARIS_VERSION < 10
/* [u]int_fast*_t not in <sys/int_types.h> */
typedef unsigned char uint_fast8_t;
typedef unsigned int uint_fast16_t;
typedef signed int int_fast16_t;
#endif
#ifndef MIN
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#endif
#ifndef MAX
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#endif
/* Minimum function that returns zero only iff both values are zero.
* Intended for use with unsigned values only. */
#ifndef MIN_NON_ZERO
#define MIN_NON_ZERO(a, b) (((a) != 0 && (a) < (b)) ? (a) : (b))
#endif
#ifndef ROUND_UP
#define ROUND_UP(n,d) (((n) + (d) - 1) & -(d))
#endif
#ifndef DIV_ROUND_UP
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#endif
#ifndef ARRAY_SIZE
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif
int qemu_daemon(int nochdir, int noclose);
void *qemu_try_memalign(size_t alignment, size_t size);
void *qemu_memalign(size_t alignment, size_t size);
void *qemu_anon_ram_alloc(size_t size, uint64_t *align);
void qemu_vfree(void *ptr);
void qemu_anon_ram_free(void *ptr, size_t size);
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
#define QEMU_MADV_INVALID -1
#if defined(CONFIG_MADVISE)
#define QEMU_MADV_WILLNEED MADV_WILLNEED
#define QEMU_MADV_DONTNEED MADV_DONTNEED
#ifdef MADV_DONTFORK
#define QEMU_MADV_DONTFORK MADV_DONTFORK
#else
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#endif
#ifdef MADV_MERGEABLE
#define QEMU_MADV_MERGEABLE MADV_MERGEABLE
#else
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#endif
#ifdef MADV_UNMERGEABLE
#define QEMU_MADV_UNMERGEABLE MADV_UNMERGEABLE
#else
#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID
#endif
#ifdef MADV_DODUMP
#define QEMU_MADV_DODUMP MADV_DODUMP
#else
#define QEMU_MADV_DODUMP QEMU_MADV_INVALID
#endif
#ifdef MADV_DONTDUMP
#define QEMU_MADV_DONTDUMP MADV_DONTDUMP
#else
#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID
#endif
#ifdef MADV_HUGEPAGE
#define QEMU_MADV_HUGEPAGE MADV_HUGEPAGE
#else
#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID
#endif
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
#elif defined(CONFIG_POSIX_MADVISE)
#define QEMU_MADV_WILLNEED POSIX_MADV_WILLNEED
#define QEMU_MADV_DONTNEED POSIX_MADV_DONTNEED
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID
#define QEMU_MADV_DODUMP QEMU_MADV_INVALID
#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID
#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
#else /* no-op */
#define QEMU_MADV_WILLNEED QEMU_MADV_INVALID
#define QEMU_MADV_DONTNEED QEMU_MADV_INVALID
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID
#define QEMU_MADV_DODUMP QEMU_MADV_INVALID
#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID
#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
#endif
int qemu_madvise(void *addr, size_t len, int advice);
int qemu_open(const char *name, int flags, ...);
int qemu_close(int fd);
#if defined(__HAIKU__) && defined(__i386__)
#define FMT_pid "%ld"
#elif defined(WIN64)
#define FMT_pid "%" PRId64
#else
#define FMT_pid "%d"
#endif
int qemu_create_pidfile(const char *filename);
int qemu_get_thread_id(void);
#ifndef CONFIG_IOVEC
struct iovec {
void *iov_base;
size_t iov_len;
};
/*
* Use the same value as Linux for now.
*/
#define IOV_MAX 1024
ssize_t readv(int fd, const struct iovec *iov, int iov_cnt);
ssize_t writev(int fd, const struct iovec *iov, int iov_cnt);
#else
#include <sys/uio.h>
#endif
#ifdef _WIN32
static inline void qemu_timersub(const struct timeval *val1,
const struct timeval *val2,
struct timeval *res)
{
res->tv_sec = val1->tv_sec - val2->tv_sec;
if (val1->tv_usec < val2->tv_usec) {
res->tv_sec--;
res->tv_usec = val1->tv_usec - val2->tv_usec + 1000 * 1000;
} else {
res->tv_usec = val1->tv_usec - val2->tv_usec;
}
}
#else
#define qemu_timersub timersub
#endif
void qemu_set_cloexec(int fd);
void qemu_set_version(const char *);
const char *qemu_get_version(void);
void fips_set_state(bool requested);
bool fips_get_state(void);
/* Return a dynamically allocated pathname denoting a file or directory that is
* appropriate for storing local state.
*
* @relative_pathname need not start with a directory separator; one will be
* added automatically.
*
* The caller is responsible for releasing the value returned with g_free()
* after use.
*/
char *qemu_get_local_state_pathname(const char *relative_pathname);
/* Find program directory, and save it for later usage with
* qemu_get_exec_dir().
* Try OS specific API first, if not working, parse from argv0. */
void qemu_init_exec_dir(const char *argv0);
/* Get the saved exec dir.
* Caller needs to release the returned string by g_free() */
char *qemu_get_exec_dir(void);
/**
* qemu_getauxval:
* @type: the auxiliary vector key to lookup
*
* Search the auxiliary vector for @type, returning the value
* or 0 if @type is not present.
*/
unsigned long qemu_getauxval(unsigned long type);
void qemu_set_tty_echo(int fd, bool echo);
void os_mem_prealloc(int fd, char *area, size_t sz);
int qemu_read_password(char *buf, int buf_size);
#endif