qemu-e2k/docs/nvdimm.txt

125 lines
4.7 KiB
Plaintext
Raw Normal View History

QEMU Virtual NVDIMM
===================
This document explains the usage of virtual NVDIMM (vNVDIMM) feature
which is available since QEMU v2.6.0.
The current QEMU only implements the persistent memory mode of vNVDIMM
device and not the block window mode.
Basic Usage
-----------
The storage of a vNVDIMM device in QEMU is provided by the memory
backend (i.e. memory-backend-file and memory-backend-ram). A simple
way to create a vNVDIMM device at startup time is done via the
following command line options:
-machine pc,nvdimm
-m $RAM_SIZE,slots=$N,maxmem=$MAX_SIZE
-object memory-backend-file,id=mem1,share=on,mem-path=$PATH,size=$NVDIMM_SIZE
-device nvdimm,id=nvdimm1,memdev=mem1
Where,
- the "nvdimm" machine option enables vNVDIMM feature.
- "slots=$N" should be equal to or larger than the total amount of
normal RAM devices and vNVDIMM devices, e.g. $N should be >= 2 here.
- "maxmem=$MAX_SIZE" should be equal to or larger than the total size
of normal RAM devices and vNVDIMM devices, e.g. $MAX_SIZE should be
>= $RAM_SIZE + $NVDIMM_SIZE here.
- "object memory-backend-file,id=mem1,share=on,mem-path=$PATH,size=$NVDIMM_SIZE"
creates a backend storage of size $NVDIMM_SIZE on a file $PATH. All
accesses to the virtual NVDIMM device go to the file $PATH.
"share=on/off" controls the visibility of guest writes. If
"share=on", then guest writes will be applied to the backend
file. If another guest uses the same backend file with option
"share=on", then above writes will be visible to it as well. If
"share=off", then guest writes won't be applied to the backend
file and thus will be invisible to other guests.
- "device nvdimm,id=nvdimm1,memdev=mem1" creates a virtual NVDIMM
device whose storage is provided by above memory backend device.
Multiple vNVDIMM devices can be created if multiple pairs of "-object"
and "-device" are provided.
For above command line options, if the guest OS has the proper NVDIMM
driver, it should be able to detect a NVDIMM device which is in the
persistent memory mode and whose size is $NVDIMM_SIZE.
Note:
1. Prior to QEMU v2.8.0, if memory-backend-file is used and the actual
backend file size is not equal to the size given by "size" option,
QEMU will truncate the backend file by ftruncate(2), which will
corrupt the existing data in the backend file, especially for the
shrink case.
QEMU v2.8.0 and later check the backend file size and the "size"
option. If they do not match, QEMU will report errors and abort in
order to avoid the data corruption.
2. QEMU v2.6.0 only puts a basic alignment requirement on the "size"
option of memory-backend-file, e.g. 4KB alignment on x86. However,
QEMU v.2.7.0 puts an additional alignment requirement, which may
require a larger value than the basic one, e.g. 2MB on x86. This
change breaks the usage of memory-backend-file that only satisfies
the basic alignment.
QEMU v2.8.0 and later remove the additional alignment on non-s390x
architectures, so the broken memory-backend-file can work again.
Label
-----
QEMU v2.7.0 and later implement the label support for vNVDIMM devices.
To enable label on vNVDIMM devices, users can simply add
"label-size=$SZ" option to "-device nvdimm", e.g.
-device nvdimm,id=nvdimm1,memdev=mem1,label-size=128K
Note:
1. The minimal label size is 128KB.
2. QEMU v2.7.0 and later store labels at the end of backend storage.
If a memory backend file, which was previously used as the backend
of a vNVDIMM device without labels, is now used for a vNVDIMM
device with label, the data in the label area at the end of file
will be inaccessible to the guest. If any useful data (e.g. the
meta-data of the file system) was stored there, the latter usage
may result guest data corruption (e.g. breakage of guest file
system).
Hotplug
-------
QEMU v2.8.0 and later implement the hotplug support for vNVDIMM
devices. Similarly to the RAM hotplug, the vNVDIMM hotplug is
accomplished by two monitor commands "object_add" and "device_add".
For example, the following commands add another 4GB vNVDIMM device to
the guest:
(qemu) object_add memory-backend-file,id=mem2,share=on,mem-path=new_nvdimm.img,size=4G
(qemu) device_add nvdimm,id=nvdimm2,memdev=mem2
Note:
1. Each hotplugged vNVDIMM device consumes one memory slot. Users
should always ensure the memory option "-m ...,slots=N" specifies
enough number of slots, i.e.
N >= number of RAM devices +
number of statically plugged vNVDIMM devices +
number of hotplugged vNVDIMM devices
2. The similar is required for the memory option "-m ...,maxmem=M", i.e.
M >= size of RAM devices +
size of statically plugged vNVDIMM devices +
size of hotplugged vNVDIMM devices