qemu-e2k/hw/display/xlnx_dp.c

1380 lines
47 KiB
C
Raw Normal View History

/*
* Xilinx Display Port
*
* Copyright (C) 2015 : GreenSocs Ltd
* http://www.greensocs.com/ , email: info@greensocs.com
*
* Developed by :
* Frederic Konrad <fred.konrad@greensocs.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option)any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/display/xlnx_dp.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#ifndef DEBUG_DP
#define DEBUG_DP 0
#endif
#define DPRINTF(fmt, ...) do { \
if (DEBUG_DP) { \
qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__); \
} \
maint: Fix macros with broken 'do/while(0); ' usage The point of writing a macro embedded in a 'do { ... } while (0)' loop (particularly if the macro has multiple statements or would otherwise end with an 'if' statement) is so that the macro can be used as a drop-in statement with the caller supplying the trailing ';'. Although our coding style frowns on brace-less 'if': if (cond) statement; else something else; that is the classic case where failure to use do/while(0) wrapping would cause the 'else' to pair with any embedded 'if' in the macro rather than the intended outer 'if'. But conversely, if the macro includes an embedded ';', then the same brace-less coding style would now have two statements, making the 'else' a syntax error rather than pairing with the outer 'if'. Thus, even though our coding style with required braces is not impacted, ending a macro with ';' makes our code harder to port to projects that use brace-less styles. The change should have no semantic impact. I was not able to fully compile-test all of the changes (as some of them are examples of the ugly bit-rotting debug print statements that are completely elided by default, and I didn't want to recompile with the necessary -D witnesses - cleaning those up is left as a bite-sized task for another day); I did, however, audit that for all files touched, all callers of the changed macros DID supply a trailing ';' at the callsite, and did not appear to be used as part of a brace-less conditional. Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\ Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20171201232433.25193-7-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-02 00:24:32 +01:00
} while (0)
/*
* Register offset for DP.
*/
#define DP_LINK_BW_SET (0x0000 >> 2)
#define DP_LANE_COUNT_SET (0x0004 >> 2)
#define DP_ENHANCED_FRAME_EN (0x0008 >> 2)
#define DP_TRAINING_PATTERN_SET (0x000C >> 2)
#define DP_LINK_QUAL_PATTERN_SET (0x0010 >> 2)
#define DP_SCRAMBLING_DISABLE (0x0014 >> 2)
#define DP_DOWNSPREAD_CTRL (0x0018 >> 2)
#define DP_SOFTWARE_RESET (0x001C >> 2)
#define DP_TRANSMITTER_ENABLE (0x0080 >> 2)
#define DP_MAIN_STREAM_ENABLE (0x0084 >> 2)
#define DP_FORCE_SCRAMBLER_RESET (0x00C0 >> 2)
#define DP_VERSION_REGISTER (0x00F8 >> 2)
#define DP_CORE_ID (0x00FC >> 2)
#define DP_AUX_COMMAND_REGISTER (0x0100 >> 2)
#define AUX_ADDR_ONLY_MASK (0x1000)
#define AUX_COMMAND_MASK (0x0F00)
#define AUX_COMMAND_SHIFT (8)
#define AUX_COMMAND_NBYTES (0x000F)
#define DP_AUX_WRITE_FIFO (0x0104 >> 2)
#define DP_AUX_ADDRESS (0x0108 >> 2)
#define DP_AUX_CLOCK_DIVIDER (0x010C >> 2)
#define DP_TX_USER_FIFO_OVERFLOW (0x0110 >> 2)
#define DP_INTERRUPT_SIGNAL_STATE (0x0130 >> 2)
#define DP_AUX_REPLY_DATA (0x0134 >> 2)
#define DP_AUX_REPLY_CODE (0x0138 >> 2)
#define DP_AUX_REPLY_COUNT (0x013C >> 2)
#define DP_REPLY_DATA_COUNT (0x0148 >> 2)
#define DP_REPLY_STATUS (0x014C >> 2)
#define DP_HPD_DURATION (0x0150 >> 2)
#define DP_MAIN_STREAM_HTOTAL (0x0180 >> 2)
#define DP_MAIN_STREAM_VTOTAL (0x0184 >> 2)
#define DP_MAIN_STREAM_POLARITY (0x0188 >> 2)
#define DP_MAIN_STREAM_HSWIDTH (0x018C >> 2)
#define DP_MAIN_STREAM_VSWIDTH (0x0190 >> 2)
#define DP_MAIN_STREAM_HRES (0x0194 >> 2)
#define DP_MAIN_STREAM_VRES (0x0198 >> 2)
#define DP_MAIN_STREAM_HSTART (0x019C >> 2)
#define DP_MAIN_STREAM_VSTART (0x01A0 >> 2)
#define DP_MAIN_STREAM_MISC0 (0x01A4 >> 2)
#define DP_MAIN_STREAM_MISC1 (0x01A8 >> 2)
#define DP_MAIN_STREAM_M_VID (0x01AC >> 2)
#define DP_MSA_TRANSFER_UNIT_SIZE (0x01B0 >> 2)
#define DP_MAIN_STREAM_N_VID (0x01B4 >> 2)
#define DP_USER_DATA_COUNT_PER_LANE (0x01BC >> 2)
#define DP_MIN_BYTES_PER_TU (0x01C4 >> 2)
#define DP_FRAC_BYTES_PER_TU (0x01C8 >> 2)
#define DP_INIT_WAIT (0x01CC >> 2)
#define DP_PHY_RESET (0x0200 >> 2)
#define DP_PHY_VOLTAGE_DIFF_LANE_0 (0x0220 >> 2)
#define DP_PHY_VOLTAGE_DIFF_LANE_1 (0x0224 >> 2)
#define DP_TRANSMIT_PRBS7 (0x0230 >> 2)
#define DP_PHY_CLOCK_SELECT (0x0234 >> 2)
#define DP_TX_PHY_POWER_DOWN (0x0238 >> 2)
#define DP_PHY_PRECURSOR_LANE_0 (0x023C >> 2)
#define DP_PHY_PRECURSOR_LANE_1 (0x0240 >> 2)
#define DP_PHY_POSTCURSOR_LANE_0 (0x024C >> 2)
#define DP_PHY_POSTCURSOR_LANE_1 (0x0250 >> 2)
#define DP_PHY_STATUS (0x0280 >> 2)
#define DP_TX_AUDIO_CONTROL (0x0300 >> 2)
#define DP_TX_AUD_CTRL (1)
#define DP_TX_AUDIO_CHANNELS (0x0304 >> 2)
#define DP_TX_AUDIO_INFO_DATA(n) ((0x0308 + 4 * n) >> 2)
#define DP_TX_M_AUD (0x0328 >> 2)
#define DP_TX_N_AUD (0x032C >> 2)
#define DP_TX_AUDIO_EXT_DATA(n) ((0x0330 + 4 * n) >> 2)
#define DP_INT_STATUS (0x03A0 >> 2)
#define DP_INT_MASK (0x03A4 >> 2)
#define DP_INT_EN (0x03A8 >> 2)
#define DP_INT_DS (0x03AC >> 2)
/*
* Registers offset for Audio Video Buffer configuration.
*/
#define V_BLEND_OFFSET (0xA000)
#define V_BLEND_BG_CLR_0 (0x0000 >> 2)
#define V_BLEND_BG_CLR_1 (0x0004 >> 2)
#define V_BLEND_BG_CLR_2 (0x0008 >> 2)
#define V_BLEND_SET_GLOBAL_ALPHA_REG (0x000C >> 2)
#define V_BLEND_OUTPUT_VID_FORMAT (0x0014 >> 2)
#define V_BLEND_LAYER0_CONTROL (0x0018 >> 2)
#define V_BLEND_LAYER1_CONTROL (0x001C >> 2)
#define V_BLEND_RGB2YCBCR_COEFF(n) ((0x0020 + 4 * n) >> 2)
#define V_BLEND_IN1CSC_COEFF(n) ((0x0044 + 4 * n) >> 2)
#define V_BLEND_LUMA_IN1CSC_OFFSET (0x0068 >> 2)
#define V_BLEND_CR_IN1CSC_OFFSET (0x006C >> 2)
#define V_BLEND_CB_IN1CSC_OFFSET (0x0070 >> 2)
#define V_BLEND_LUMA_OUTCSC_OFFSET (0x0074 >> 2)
#define V_BLEND_CR_OUTCSC_OFFSET (0x0078 >> 2)
#define V_BLEND_CB_OUTCSC_OFFSET (0x007C >> 2)
#define V_BLEND_IN2CSC_COEFF(n) ((0x0080 + 4 * n) >> 2)
#define V_BLEND_LUMA_IN2CSC_OFFSET (0x00A4 >> 2)
#define V_BLEND_CR_IN2CSC_OFFSET (0x00A8 >> 2)
#define V_BLEND_CB_IN2CSC_OFFSET (0x00AC >> 2)
#define V_BLEND_CHROMA_KEY_ENABLE (0x01D0 >> 2)
#define V_BLEND_CHROMA_KEY_COMP1 (0x01D4 >> 2)
#define V_BLEND_CHROMA_KEY_COMP2 (0x01D8 >> 2)
#define V_BLEND_CHROMA_KEY_COMP3 (0x01DC >> 2)
/*
* Registers offset for Audio Video Buffer configuration.
*/
#define AV_BUF_MANAGER_OFFSET (0xB000)
#define AV_BUF_FORMAT (0x0000 >> 2)
#define AV_BUF_NON_LIVE_LATENCY (0x0008 >> 2)
#define AV_CHBUF0 (0x0010 >> 2)
#define AV_CHBUF1 (0x0014 >> 2)
#define AV_CHBUF2 (0x0018 >> 2)
#define AV_CHBUF3 (0x001C >> 2)
#define AV_CHBUF4 (0x0020 >> 2)
#define AV_CHBUF5 (0x0024 >> 2)
#define AV_BUF_STC_CONTROL (0x002C >> 2)
#define AV_BUF_STC_INIT_VALUE0 (0x0030 >> 2)
#define AV_BUF_STC_INIT_VALUE1 (0x0034 >> 2)
#define AV_BUF_STC_ADJ (0x0038 >> 2)
#define AV_BUF_STC_VIDEO_VSYNC_TS_REG0 (0x003C >> 2)
#define AV_BUF_STC_VIDEO_VSYNC_TS_REG1 (0x0040 >> 2)
#define AV_BUF_STC_EXT_VSYNC_TS_REG0 (0x0044 >> 2)
#define AV_BUF_STC_EXT_VSYNC_TS_REG1 (0x0048 >> 2)
#define AV_BUF_STC_CUSTOM_EVENT_TS_REG0 (0x004C >> 2)
#define AV_BUF_STC_CUSTOM_EVENT_TS_REG1 (0x0050 >> 2)
#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0 (0x0054 >> 2)
#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1 (0x0058 >> 2)
#define AV_BUF_STC_SNAPSHOT0 (0x0060 >> 2)
#define AV_BUF_STC_SNAPSHOT1 (0x0064 >> 2)
#define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT (0x0070 >> 2)
#define AV_BUF_HCOUNT_VCOUNT_INT0 (0x0074 >> 2)
#define AV_BUF_HCOUNT_VCOUNT_INT1 (0x0078 >> 2)
#define AV_BUF_DITHER_CONFIG (0x007C >> 2)
#define AV_BUF_DITHER_CONFIG_MAX (0x008C >> 2)
#define AV_BUF_DITHER_CONFIG_MIN (0x0090 >> 2)
#define AV_BUF_PATTERN_GEN_SELECT (0x0100 >> 2)
#define AV_BUF_AUD_VID_CLK_SOURCE (0x0120 >> 2)
#define AV_BUF_SRST_REG (0x0124 >> 2)
#define AV_BUF_AUDIO_RDY_INTERVAL (0x0128 >> 2)
#define AV_BUF_AUDIO_CH_CONFIG (0x012C >> 2)
#define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
#define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n) ((0x020C + 4 * n) >> 2)
#define AV_BUF_LIVE_VIDEO_COMP_SF(n) ((0x0218 + 4 * n) >> 2)
#define AV_BUF_LIVE_VID_CONFIG (0x0224 >> 2)
#define AV_BUF_LIVE_GFX_COMP_SF(n) ((0x0228 + 4 * n) >> 2)
#define AV_BUF_LIVE_GFX_CONFIG (0x0234 >> 2)
#define AUDIO_MIXER_REGISTER_OFFSET (0xC000)
#define AUDIO_MIXER_VOLUME_CONTROL (0x0000 >> 2)
#define AUDIO_MIXER_META_DATA (0x0004 >> 2)
#define AUD_CH_STATUS_REG(n) ((0x0008 + 4 * n) >> 2)
#define AUD_CH_A_DATA_REG(n) ((0x0020 + 4 * n) >> 2)
#define AUD_CH_B_DATA_REG(n) ((0x0038 + 4 * n) >> 2)
#define DP_AUDIO_DMA_CHANNEL(n) (4 + n)
#define DP_GRAPHIC_DMA_CHANNEL (3)
#define DP_VIDEO_DMA_CHANNEL (0)
enum DPGraphicFmt {
DP_GRAPHIC_RGBA8888 = 0 << 8,
DP_GRAPHIC_ABGR8888 = 1 << 8,
DP_GRAPHIC_RGB888 = 2 << 8,
DP_GRAPHIC_BGR888 = 3 << 8,
DP_GRAPHIC_RGBA5551 = 4 << 8,
DP_GRAPHIC_RGBA4444 = 5 << 8,
DP_GRAPHIC_RGB565 = 6 << 8,
DP_GRAPHIC_8BPP = 7 << 8,
DP_GRAPHIC_4BPP = 8 << 8,
DP_GRAPHIC_2BPP = 9 << 8,
DP_GRAPHIC_1BPP = 10 << 8,
DP_GRAPHIC_MASK = 0xF << 8
};
enum DPVideoFmt {
DP_NL_VID_CB_Y0_CR_Y1 = 0,
DP_NL_VID_CR_Y0_CB_Y1 = 1,
DP_NL_VID_Y0_CR_Y1_CB = 2,
DP_NL_VID_Y0_CB_Y1_CR = 3,
DP_NL_VID_YV16 = 4,
DP_NL_VID_YV24 = 5,
DP_NL_VID_YV16CL = 6,
DP_NL_VID_MONO = 7,
DP_NL_VID_YV16CL2 = 8,
DP_NL_VID_YUV444 = 9,
DP_NL_VID_RGB888 = 10,
DP_NL_VID_RGBA8880 = 11,
DP_NL_VID_RGB888_10BPC = 12,
DP_NL_VID_YUV444_10BPC = 13,
DP_NL_VID_YV16CL2_10BPC = 14,
DP_NL_VID_YV16CL_10BPC = 15,
DP_NL_VID_YV16_10BPC = 16,
DP_NL_VID_YV24_10BPC = 17,
DP_NL_VID_Y_ONLY_10BPC = 18,
DP_NL_VID_YV16_420 = 19,
DP_NL_VID_YV16CL_420 = 20,
DP_NL_VID_YV16CL2_420 = 21,
DP_NL_VID_YV16_420_10BPC = 22,
DP_NL_VID_YV16CL_420_10BPC = 23,
DP_NL_VID_YV16CL2_420_10BPC = 24,
DP_NL_VID_FMT_MASK = 0x1F
};
typedef enum DPGraphicFmt DPGraphicFmt;
typedef enum DPVideoFmt DPVideoFmt;
static const VMStateDescription vmstate_dp = {
.name = TYPE_XLNX_DP,
.version_id = 1,
.fields = (VMStateField[]){
VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
DP_CORE_REG_ARRAY_SIZE),
VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
DP_AVBUF_REG_ARRAY_SIZE),
VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
DP_VBLEND_REG_ARRAY_SIZE),
VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
DP_AUDIO_REG_ARRAY_SIZE),
VMSTATE_END_OF_LIST()
}
};
static void xlnx_dp_update_irq(XlnxDPState *s);
static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
offset = offset >> 2;
return s->audio_registers[offset];
}
static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
offset = offset >> 2;
switch (offset) {
case AUDIO_MIXER_META_DATA:
s->audio_registers[offset] = value & 0x00000001;
break;
default:
s->audio_registers[offset] = value;
break;
}
}
static const MemoryRegionOps audio_ops = {
.read = xlnx_dp_audio_read,
.write = xlnx_dp_audio_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
uint8_t channel)
{
switch (channel) {
case 0:
return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
case 1:
return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
16);
default:
return 0;
}
}
static inline void xlnx_dp_audio_activate(XlnxDPState *s)
{
bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
& DP_TX_AUD_CTRL) != 0);
AUD_set_active_out(s->amixer_output_stream, activated);
xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
&s->audio_buffer_0);
xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
&s->audio_buffer_1);
}
static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
{
/*
* Audio packets are signed and have this shape:
* | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
* | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
*
* Output audio is 16bits saturated.
*/
int i;
if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
for (i = 0; i < s->audio_data_available[0] / 2; i++) {
s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
* xlnx_dp_audio_get_volume(s, 0) / 8192;
}
s->byte_left = s->audio_data_available[0];
} else {
memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
}
if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
if ((s->audio_data_available[0] == 0)
|| (s->audio_data_available[1] == s->audio_data_available[0])) {
for (i = 0; i < s->audio_data_available[1] / 2; i++) {
s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
* xlnx_dp_audio_get_volume(s, 1) / 8192;
}
s->byte_left = s->audio_data_available[1];
}
}
for (i = 0; i < s->byte_left / 2; i++) {
s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
}
s->data_ptr = 0;
}
static void xlnx_dp_audio_callback(void *opaque, int avail)
{
/*
* Get some data from the DPDMA and compute these datas.
* Then wait for QEMU's audio subsystem to call this callback.
*/
XlnxDPState *s = XLNX_DP(opaque);
size_t written = 0;
/* If there are already some data don't get more data. */
if (s->byte_left == 0) {
s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
true);
s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
true);
xlnx_dp_audio_mix_buffer(s);
}
/* Send the buffer through the audio. */
if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
if (s->byte_left != 0) {
written = AUD_write(s->amixer_output_stream,
&s->out_buffer[s->data_ptr], s->byte_left);
} else {
int len_to_copy;
/*
* There is nothing to play.. We don't have any data! Fill the
* buffer with zero's and send it.
*/
written = 0;
while (avail) {
len_to_copy = MIN(AUD_CHBUF_MAX_DEPTH, avail);
memset(s->out_buffer, 0, len_to_copy);
avail -= AUD_write(s->amixer_output_stream, s->out_buffer,
len_to_copy);
}
}
} else {
written = AUD_write(s->amixer_output_stream,
&s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
}
s->byte_left -= written;
s->data_ptr += written;
}
/*
* AUX channel related function.
*/
static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
{
fifo8_reset(&s->rx_fifo);
}
static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
{
DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
fifo8_push_all(&s->rx_fifo, buf, len);
}
static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
{
uint8_t ret;
if (fifo8_is_empty(&s->rx_fifo)) {
hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO In the previous commit we fixed a crash when the guest read a register that pop from an empty FIFO. By auditing the repository, we found another similar use with an easy way to reproduce: $ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S QEMU 4.0.50 monitor - type 'help' for more information (qemu) xp/b 0xfd4a0134 Aborted (core dumped) (gdb) bt #0 0x00007f6936dea57f in raise () at /lib64/libc.so.6 #1 0x00007f6936dd4895 in abort () at /lib64/libc.so.6 #2 0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431 #3 0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667 #4 0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439 #5 0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569 #6 0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420 #7 0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447 #8 0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385 #9 0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423 #10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436 #11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131 #12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723 #13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795 #14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082 Fix by checking the FIFO is not empty before popping from it. The datasheet is not clear about the reset value of this register, we choose to return '0'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190709113715.7761-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15 15:17:03 +02:00
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Reading empty RX_FIFO\n",
__func__);
/*
* The datasheet is not clear about the reset value, it seems
* to be unspecified. We choose to return '0'.
*/
ret = 0;
} else {
ret = fifo8_pop(&s->rx_fifo);
DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
}
return ret;
}
static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
{
fifo8_reset(&s->tx_fifo);
}
static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
{
DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
fifo8_push_all(&s->tx_fifo, buf, len);
}
static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
{
uint8_t ret;
if (fifo8_is_empty(&s->tx_fifo)) {
error_report("%s: TX_FIFO underflow", __func__);
abort();
}
ret = fifo8_pop(&s->tx_fifo);
DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
return ret;
}
static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
{
return s->core_registers[DP_AUX_ADDRESS];
}
/*
* Get command from the register.
*/
static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
{
bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
uint8_t buf[16];
int i;
/*
* When an address_only command is executed nothing happen to the fifo, so
* just make nbytes = 0.
*/
if (address_only) {
nbytes = 0;
}
switch (cmd) {
case READ_AUX:
case READ_I2C:
case READ_I2C_MOT:
s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
xlnx_dp_aux_get_address(s),
nbytes, buf);
s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
}
break;
case WRITE_AUX:
case WRITE_I2C:
case WRITE_I2C_MOT:
for (i = 0; i < nbytes; i++) {
buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
}
s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
xlnx_dp_aux_get_address(s),
nbytes, buf);
xlnx_dp_aux_clear_tx_fifo(s);
break;
case WRITE_I2C_STATUS:
qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
break;
default:
error_report("%s: invalid command: %u", __func__, cmd);
abort();
}
s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
}
static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
Error **errp)
{
XlnxDPState *s = XLNX_DP(obj);
if (s->console) {
DisplaySurface *surface = qemu_console_surface(s->console);
XlnxDPDMAState *dma = XLNX_DPDMA(val);
xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
surface_data(surface));
}
}
static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
{
return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
}
static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
{
/*
* If the alpha is totally opaque (255) we consider the alpha is disabled to
* reduce CPU consumption.
*/
return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
}
static void xlnx_dp_recreate_surface(XlnxDPState *s)
{
/*
* Two possibilities, if blending is enabled the console displays
* bout_plane, if not g_plane is displayed.
*/
uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
DisplaySurface *current_console_surface = qemu_console_surface(s->console);
if ((width != 0) && (height != 0)) {
/*
* As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
* surface we need to be careful and don't free the surface associated
* to the console or double free will happen.
*/
if (s->bout_plane.surface != current_console_surface) {
qemu_free_displaysurface(s->bout_plane.surface);
}
if (s->v_plane.surface != current_console_surface) {
qemu_free_displaysurface(s->v_plane.surface);
}
if (s->g_plane.surface != current_console_surface) {
qemu_free_displaysurface(s->g_plane.surface);
}
s->g_plane.surface
= qemu_create_displaysurface_from(width, height,
s->g_plane.format, 0, NULL);
s->v_plane.surface
= qemu_create_displaysurface_from(width, height,
s->v_plane.format, 0, NULL);
if (xlnx_dp_global_alpha_enabled(s)) {
s->bout_plane.surface =
qemu_create_displaysurface_from(width,
height,
s->g_plane.format,
0, NULL);
dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
} else {
s->bout_plane.surface = NULL;
dpy_gfx_replace_surface(s->console, s->g_plane.surface);
}
xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
surface_data(s->g_plane.surface));
xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
surface_data(s->v_plane.surface));
}
}
/*
* Change the graphic format of the surface.
*/
static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
{
switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
case DP_GRAPHIC_RGBA8888:
s->g_plane.format = PIXMAN_r8g8b8a8;
break;
case DP_GRAPHIC_ABGR8888:
s->g_plane.format = PIXMAN_a8b8g8r8;
break;
case DP_GRAPHIC_RGB565:
s->g_plane.format = PIXMAN_r5g6b5;
break;
case DP_GRAPHIC_RGB888:
s->g_plane.format = PIXMAN_r8g8b8;
break;
case DP_GRAPHIC_BGR888:
s->g_plane.format = PIXMAN_b8g8r8;
break;
default:
error_report("%s: unsupported graphic format %u", __func__,
s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
abort();
}
switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
case 0:
s->v_plane.format = PIXMAN_x8b8g8r8;
break;
case DP_NL_VID_Y0_CB_Y1_CR:
s->v_plane.format = PIXMAN_yuy2;
break;
case DP_NL_VID_RGBA8880:
s->v_plane.format = PIXMAN_x8b8g8r8;
break;
default:
error_report("%s: unsupported video format %u", __func__,
s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
abort();
}
xlnx_dp_recreate_surface(s);
}
static void xlnx_dp_update_irq(XlnxDPState *s)
{
uint32_t flags;
flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
qemu_set_irq(s->irq, flags != 0);
}
static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
uint64_t ret = 0;
offset = offset >> 2;
switch (offset) {
case DP_TX_USER_FIFO_OVERFLOW:
/* This register is cleared after a read */
ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
break;
case DP_AUX_REPLY_DATA:
ret = xlnx_dp_aux_pop_rx_fifo(s);
break;
case DP_INTERRUPT_SIGNAL_STATE:
/*
* XXX: Not sure it is the right thing to do actually.
* The register is not written by the device driver so it's stuck
* to 0x04.
*/
ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
break;
case DP_AUX_WRITE_FIFO:
case DP_TX_AUDIO_INFO_DATA(0):
case DP_TX_AUDIO_INFO_DATA(1):
case DP_TX_AUDIO_INFO_DATA(2):
case DP_TX_AUDIO_INFO_DATA(3):
case DP_TX_AUDIO_INFO_DATA(4):
case DP_TX_AUDIO_INFO_DATA(5):
case DP_TX_AUDIO_INFO_DATA(6):
case DP_TX_AUDIO_INFO_DATA(7):
case DP_TX_AUDIO_EXT_DATA(0):
case DP_TX_AUDIO_EXT_DATA(1):
case DP_TX_AUDIO_EXT_DATA(2):
case DP_TX_AUDIO_EXT_DATA(3):
case DP_TX_AUDIO_EXT_DATA(4):
case DP_TX_AUDIO_EXT_DATA(5):
case DP_TX_AUDIO_EXT_DATA(6):
case DP_TX_AUDIO_EXT_DATA(7):
case DP_TX_AUDIO_EXT_DATA(8):
/* write only registers */
ret = 0;
break;
default:
assert(offset <= (0x3AC >> 2));
ret = s->core_registers[offset];
break;
}
DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
return ret;
}
static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
offset = offset >> 2;
switch (offset) {
/*
* Only special write case are handled.
*/
case DP_LINK_BW_SET:
s->core_registers[offset] = value & 0x000000FF;
break;
case DP_LANE_COUNT_SET:
case DP_MAIN_STREAM_MISC0:
s->core_registers[offset] = value & 0x0000000F;
break;
case DP_TRAINING_PATTERN_SET:
case DP_LINK_QUAL_PATTERN_SET:
case DP_MAIN_STREAM_POLARITY:
case DP_PHY_VOLTAGE_DIFF_LANE_0:
case DP_PHY_VOLTAGE_DIFF_LANE_1:
s->core_registers[offset] = value & 0x00000003;
break;
case DP_ENHANCED_FRAME_EN:
case DP_SCRAMBLING_DISABLE:
case DP_DOWNSPREAD_CTRL:
case DP_MAIN_STREAM_ENABLE:
case DP_TRANSMIT_PRBS7:
s->core_registers[offset] = value & 0x00000001;
break;
case DP_PHY_CLOCK_SELECT:
s->core_registers[offset] = value & 0x00000007;
break;
case DP_SOFTWARE_RESET:
/*
* No need to update this bit as it's read '0'.
*/
/*
* TODO: reset IP.
*/
break;
case DP_TRANSMITTER_ENABLE:
s->core_registers[offset] = value & 0x01;
break;
case DP_FORCE_SCRAMBLER_RESET:
/*
* No need to update this bit as it's read '0'.
*/
/*
* TODO: force a scrambler reset??
*/
break;
case DP_AUX_COMMAND_REGISTER:
s->core_registers[offset] = value & 0x00001F0F;
xlnx_dp_aux_set_command(s, s->core_registers[offset]);
break;
case DP_MAIN_STREAM_HTOTAL:
case DP_MAIN_STREAM_VTOTAL:
case DP_MAIN_STREAM_HSTART:
case DP_MAIN_STREAM_VSTART:
s->core_registers[offset] = value & 0x0000FFFF;
break;
case DP_MAIN_STREAM_HRES:
case DP_MAIN_STREAM_VRES:
s->core_registers[offset] = value & 0x0000FFFF;
xlnx_dp_recreate_surface(s);
break;
case DP_MAIN_STREAM_HSWIDTH:
case DP_MAIN_STREAM_VSWIDTH:
s->core_registers[offset] = value & 0x00007FFF;
break;
case DP_MAIN_STREAM_MISC1:
s->core_registers[offset] = value & 0x00000086;
break;
case DP_MAIN_STREAM_M_VID:
case DP_MAIN_STREAM_N_VID:
s->core_registers[offset] = value & 0x00FFFFFF;
break;
case DP_MSA_TRANSFER_UNIT_SIZE:
case DP_MIN_BYTES_PER_TU:
case DP_INIT_WAIT:
s->core_registers[offset] = value & 0x00000007;
break;
case DP_USER_DATA_COUNT_PER_LANE:
s->core_registers[offset] = value & 0x0003FFFF;
break;
case DP_FRAC_BYTES_PER_TU:
s->core_registers[offset] = value & 0x000003FF;
break;
case DP_PHY_RESET:
s->core_registers[offset] = value & 0x00010003;
/*
* TODO: Reset something?
*/
break;
case DP_TX_PHY_POWER_DOWN:
s->core_registers[offset] = value & 0x0000000F;
/*
* TODO: Power down things?
*/
break;
case DP_AUX_WRITE_FIFO: {
uint8_t c = value;
xlnx_dp_aux_push_tx_fifo(s, &c, 1);
break;
}
case DP_AUX_CLOCK_DIVIDER:
break;
case DP_AUX_REPLY_COUNT:
/*
* Writing to this register clear the counter.
*/
s->core_registers[offset] = 0x00000000;
break;
case DP_AUX_ADDRESS:
s->core_registers[offset] = value & 0x000FFFFF;
break;
case DP_VERSION_REGISTER:
case DP_CORE_ID:
case DP_TX_USER_FIFO_OVERFLOW:
case DP_AUX_REPLY_DATA:
case DP_AUX_REPLY_CODE:
case DP_REPLY_DATA_COUNT:
case DP_REPLY_STATUS:
case DP_HPD_DURATION:
/*
* Write to read only location..
*/
break;
case DP_TX_AUDIO_CONTROL:
s->core_registers[offset] = value & 0x00000001;
xlnx_dp_audio_activate(s);
break;
case DP_TX_AUDIO_CHANNELS:
s->core_registers[offset] = value & 0x00000007;
xlnx_dp_audio_activate(s);
break;
case DP_INT_STATUS:
s->core_registers[DP_INT_STATUS] &= ~value;
xlnx_dp_update_irq(s);
break;
case DP_INT_EN:
s->core_registers[DP_INT_MASK] &= ~value;
xlnx_dp_update_irq(s);
break;
case DP_INT_DS:
s->core_registers[DP_INT_MASK] |= ~value;
xlnx_dp_update_irq(s);
break;
default:
assert(offset <= (0x504C >> 2));
s->core_registers[offset] = value;
break;
}
}
static const MemoryRegionOps dp_ops = {
.read = xlnx_dp_read,
.write = xlnx_dp_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
};
/*
* This is to handle Read/Write to the Video Blender.
*/
static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
bool alpha_was_enabled;
DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
(uint32_t)value);
offset = offset >> 2;
switch (offset) {
case V_BLEND_BG_CLR_0:
case V_BLEND_BG_CLR_1:
case V_BLEND_BG_CLR_2:
s->vblend_registers[offset] = value & 0x00000FFF;
break;
case V_BLEND_SET_GLOBAL_ALPHA_REG:
/*
* A write to this register can enable or disable blending. Thus we need
* to recreate the surfaces.
*/
alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
s->vblend_registers[offset] = value & 0x000001FF;
if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
xlnx_dp_recreate_surface(s);
}
break;
case V_BLEND_OUTPUT_VID_FORMAT:
s->vblend_registers[offset] = value & 0x00000017;
break;
case V_BLEND_LAYER0_CONTROL:
case V_BLEND_LAYER1_CONTROL:
s->vblend_registers[offset] = value & 0x00000103;
break;
case V_BLEND_RGB2YCBCR_COEFF(0):
case V_BLEND_RGB2YCBCR_COEFF(1):
case V_BLEND_RGB2YCBCR_COEFF(2):
case V_BLEND_RGB2YCBCR_COEFF(3):
case V_BLEND_RGB2YCBCR_COEFF(4):
case V_BLEND_RGB2YCBCR_COEFF(5):
case V_BLEND_RGB2YCBCR_COEFF(6):
case V_BLEND_RGB2YCBCR_COEFF(7):
case V_BLEND_RGB2YCBCR_COEFF(8):
case V_BLEND_IN1CSC_COEFF(0):
case V_BLEND_IN1CSC_COEFF(1):
case V_BLEND_IN1CSC_COEFF(2):
case V_BLEND_IN1CSC_COEFF(3):
case V_BLEND_IN1CSC_COEFF(4):
case V_BLEND_IN1CSC_COEFF(5):
case V_BLEND_IN1CSC_COEFF(6):
case V_BLEND_IN1CSC_COEFF(7):
case V_BLEND_IN1CSC_COEFF(8):
case V_BLEND_IN2CSC_COEFF(0):
case V_BLEND_IN2CSC_COEFF(1):
case V_BLEND_IN2CSC_COEFF(2):
case V_BLEND_IN2CSC_COEFF(3):
case V_BLEND_IN2CSC_COEFF(4):
case V_BLEND_IN2CSC_COEFF(5):
case V_BLEND_IN2CSC_COEFF(6):
case V_BLEND_IN2CSC_COEFF(7):
case V_BLEND_IN2CSC_COEFF(8):
s->vblend_registers[offset] = value & 0x0000FFFF;
break;
case V_BLEND_LUMA_IN1CSC_OFFSET:
case V_BLEND_CR_IN1CSC_OFFSET:
case V_BLEND_CB_IN1CSC_OFFSET:
case V_BLEND_LUMA_IN2CSC_OFFSET:
case V_BLEND_CR_IN2CSC_OFFSET:
case V_BLEND_CB_IN2CSC_OFFSET:
case V_BLEND_LUMA_OUTCSC_OFFSET:
case V_BLEND_CR_OUTCSC_OFFSET:
case V_BLEND_CB_OUTCSC_OFFSET:
s->vblend_registers[offset] = value & 0x3FFF7FFF;
break;
case V_BLEND_CHROMA_KEY_ENABLE:
s->vblend_registers[offset] = value & 0x00000003;
break;
case V_BLEND_CHROMA_KEY_COMP1:
case V_BLEND_CHROMA_KEY_COMP2:
case V_BLEND_CHROMA_KEY_COMP3:
s->vblend_registers[offset] = value & 0x0FFF0FFF;
break;
default:
s->vblend_registers[offset] = value;
break;
}
}
static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
s->vblend_registers[offset >> 2]);
return s->vblend_registers[offset >> 2];
}
static const MemoryRegionOps vblend_ops = {
.read = xlnx_dp_vblend_read,
.write = xlnx_dp_vblend_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
};
/*
* This is to handle Read/Write to the Audio Video buffer manager.
*/
static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
(uint32_t)value);
offset = offset >> 2;
switch (offset) {
case AV_BUF_FORMAT:
s->avbufm_registers[offset] = value & 0x00000FFF;
xlnx_dp_change_graphic_fmt(s);
break;
case AV_CHBUF0:
case AV_CHBUF1:
case AV_CHBUF2:
case AV_CHBUF3:
case AV_CHBUF4:
case AV_CHBUF5:
s->avbufm_registers[offset] = value & 0x0000007F;
break;
case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
s->avbufm_registers[offset] = value & 0x0000007F;
break;
case AV_BUF_DITHER_CONFIG:
s->avbufm_registers[offset] = value & 0x000007FF;
break;
case AV_BUF_DITHER_CONFIG_MAX:
case AV_BUF_DITHER_CONFIG_MIN:
s->avbufm_registers[offset] = value & 0x00000FFF;
break;
case AV_BUF_PATTERN_GEN_SELECT:
s->avbufm_registers[offset] = value & 0xFFFFFF03;
break;
case AV_BUF_AUD_VID_CLK_SOURCE:
s->avbufm_registers[offset] = value & 0x00000007;
break;
case AV_BUF_SRST_REG:
s->avbufm_registers[offset] = value & 0x00000002;
break;
case AV_BUF_AUDIO_CH_CONFIG:
s->avbufm_registers[offset] = value & 0x00000003;
break;
case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
s->avbufm_registers[offset] = value & 0x0000FFFF;
break;
case AV_BUF_LIVE_VIDEO_COMP_SF(0):
case AV_BUF_LIVE_VIDEO_COMP_SF(1):
case AV_BUF_LIVE_VIDEO_COMP_SF(2):
case AV_BUF_LIVE_VID_CONFIG:
case AV_BUF_LIVE_GFX_COMP_SF(0):
case AV_BUF_LIVE_GFX_COMP_SF(1):
case AV_BUF_LIVE_GFX_COMP_SF(2):
case AV_BUF_LIVE_GFX_CONFIG:
case AV_BUF_NON_LIVE_LATENCY:
case AV_BUF_STC_CONTROL:
case AV_BUF_STC_INIT_VALUE0:
case AV_BUF_STC_INIT_VALUE1:
case AV_BUF_STC_ADJ:
case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
case AV_BUF_STC_EXT_VSYNC_TS_REG0:
case AV_BUF_STC_EXT_VSYNC_TS_REG1:
case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
case AV_BUF_STC_SNAPSHOT0:
case AV_BUF_STC_SNAPSHOT1:
case AV_BUF_HCOUNT_VCOUNT_INT0:
case AV_BUF_HCOUNT_VCOUNT_INT1:
qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
PRIx64 "\n",
offset << 2);
break;
default:
s->avbufm_registers[offset] = value;
break;
}
}
static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
unsigned size)
{
XlnxDPState *s = XLNX_DP(opaque);
offset = offset >> 2;
return s->avbufm_registers[offset];
}
static const MemoryRegionOps avbufm_ops = {
.read = xlnx_dp_avbufm_read,
.write = xlnx_dp_avbufm_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
};
/*
* This is a global alpha blending using pixman.
* Both graphic and video planes are multiplied with the global alpha
* coefficient and added.
*/
static inline void xlnx_dp_blend_surface(XlnxDPState *s)
{
pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
pixman_double_to_fixed(1),
pixman_double_to_fixed(1.0) };
pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
pixman_double_to_fixed(1),
pixman_double_to_fixed(1.0) };
if ((surface_width(s->g_plane.surface)
!= surface_width(s->v_plane.surface)) ||
(surface_height(s->g_plane.surface)
!= surface_height(s->v_plane.surface))) {
return;
}
alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
/ 256.0);
alpha2[2] = pixman_double_to_fixed((255.0
- (double)xlnx_dp_global_alpha_value(s))
/ 256.0);
pixman_image_set_filter(s->g_plane.surface->image,
PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
surface_width(s->g_plane.surface),
surface_height(s->g_plane.surface));
pixman_image_set_filter(s->v_plane.surface->image,
PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
surface_width(s->g_plane.surface),
surface_height(s->g_plane.surface));
}
static void xlnx_dp_update_display(void *opaque)
{
XlnxDPState *s = XLNX_DP(opaque);
if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
return;
}
s->core_registers[DP_INT_STATUS] |= (1 << 13);
xlnx_dp_update_irq(s);
xlnx_dpdma_trigger_vsync_irq(s->dpdma);
/*
* Trigger the DMA channel.
*/
if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
/*
* An error occurred don't do anything with the data..
* Trigger an underflow interrupt.
*/
s->core_registers[DP_INT_STATUS] |= (1 << 21);
xlnx_dp_update_irq(s);
return;
}
if (xlnx_dp_global_alpha_enabled(s)) {
if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
s->core_registers[DP_INT_STATUS] |= (1 << 21);
xlnx_dp_update_irq(s);
return;
}
xlnx_dp_blend_surface(s);
}
/*
* XXX: We might want to update only what changed.
*/
dpy_gfx_update_full(s->console);
}
static const GraphicHwOps xlnx_dp_gfx_ops = {
.gfx_update = xlnx_dp_update_display,
};
static void xlnx_dp_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
XlnxDPState *s = XLNX_DP(obj);
memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050);
memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
".core", 0x3AF);
memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem);
memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
".v_blend", 0x1DF);
memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem);
memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
".av_buffer_manager", 0x238);
memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem);
memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
".audio", sizeof(s->audio_registers));
memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
sysbus_init_mmio(sbd, &s->container);
sysbus_init_irq(sbd, &s->irq);
object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
(Object **) &s->dpdma,
xlnx_dp_set_dpdma,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
OBJ_PROP_LINK_STRONG);
/*
* Initialize AUX Bus.
*/
s->aux_bus = aux_bus_init(DEVICE(obj), "aux");
/*
* Initialize DPCD and EDID..
*/
s->dpcd = DPCD(qdev_new("dpcd"));
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd));
s->edid = I2CDDC(qdev_new("i2c-ddc"));
i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50);
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid));
fifo8_create(&s->rx_fifo, 16);
fifo8_create(&s->tx_fifo, 16);
}
static void xlnx_dp_finalize(Object *obj)
{
XlnxDPState *s = XLNX_DP(obj);
fifo8_destroy(&s->tx_fifo);
fifo8_destroy(&s->rx_fifo);
}
static void xlnx_dp_realize(DeviceState *dev, Error **errp)
{
XlnxDPState *s = XLNX_DP(dev);
DisplaySurface *surface;
struct audsettings as;
aux_bus_realize(s->aux_bus);
qdev_realize(DEVICE(s->dpcd), BUS(s->aux_bus), &error_fatal);
aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
qdev_realize_and_unref(DEVICE(s->edid), BUS(aux_get_i2c_bus(s->aux_bus)),
&error_fatal);
s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
surface = qemu_console_surface(s->console);
xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
surface_data(surface));
as.freq = 44100;
as.nchannels = 2;
as.fmt = AUDIO_FORMAT_S16;
as.endianness = 0;
AUD_register_card("xlnx_dp.audio", &s->aud_card);
s->amixer_output_stream = AUD_open_out(&s->aud_card,
s->amixer_output_stream,
"xlnx_dp.audio.out",
s,
xlnx_dp_audio_callback,
&as);
AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
xlnx_dp_audio_activate(s);
}
static void xlnx_dp_reset(DeviceState *dev)
{
XlnxDPState *s = XLNX_DP(dev);
memset(s->core_registers, 0, sizeof(s->core_registers));
s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
s->core_registers[DP_CORE_ID] = 0x01020000;
s->core_registers[DP_REPLY_STATUS] = 0x00000010;
s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
s->core_registers[DP_INIT_WAIT] = 0x00000020;
s->core_registers[DP_PHY_RESET] = 0x00010003;
s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
s->core_registers[DP_PHY_STATUS] = 0x00000043;
s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
memset(s->audio_registers, 0, sizeof(s->audio_registers));
s->byte_left = 0;
xlnx_dp_aux_clear_rx_fifo(s);
xlnx_dp_change_graphic_fmt(s);
xlnx_dp_update_irq(s);
}
static void xlnx_dp_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = xlnx_dp_realize;
dc->vmsd = &vmstate_dp;
dc->reset = xlnx_dp_reset;
}
static const TypeInfo xlnx_dp_info = {
.name = TYPE_XLNX_DP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(XlnxDPState),
.instance_init = xlnx_dp_init,
.instance_finalize = xlnx_dp_finalize,
.class_init = xlnx_dp_class_init,
};
static void xlnx_dp_register_types(void)
{
type_register_static(&xlnx_dp_info);
}
type_init(xlnx_dp_register_types)