qemu-e2k/trace/simple.c

359 lines
8.8 KiB
C
Raw Normal View History

/*
* Simple trace backend
*
* Copyright IBM, Corp. 2010
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include <stdlib.h>
#include <stdint.h>
#include <stdio.h>
#include <time.h>
#include <signal.h>
#include <pthread.h>
#include "qemu-timer.h"
#include "trace.h"
#include "trace/control.h"
/** Trace file header event ID */
#define HEADER_EVENT_ID (~(uint64_t)0) /* avoids conflicting with TraceEventIDs */
/** Trace file magic number */
#define HEADER_MAGIC 0xf2b177cb0aa429b4ULL
/** Trace file version number, bump if format changes */
#define HEADER_VERSION 0
/** Records were dropped event ID */
#define DROPPED_EVENT_ID (~(uint64_t)0 - 1)
/** Trace record is valid */
#define TRACE_RECORD_VALID ((uint64_t)1 << 63)
/** Trace buffer entry */
typedef struct {
uint64_t event;
uint64_t timestamp_ns;
uint64_t x1;
uint64_t x2;
uint64_t x3;
uint64_t x4;
uint64_t x5;
uint64_t x6;
} TraceRecord;
enum {
TRACE_BUF_LEN = 4096,
TRACE_BUF_FLUSH_THRESHOLD = TRACE_BUF_LEN / 4,
};
/*
* Trace records are written out by a dedicated thread. The thread waits for
* records to become available, writes them out, and then waits again.
*/
static pthread_mutex_t trace_lock = PTHREAD_MUTEX_INITIALIZER;
static pthread_cond_t trace_available_cond = PTHREAD_COND_INITIALIZER;
static pthread_cond_t trace_empty_cond = PTHREAD_COND_INITIALIZER;
static bool trace_available;
static bool trace_writeout_enabled;
static TraceRecord trace_buf[TRACE_BUF_LEN];
static unsigned int trace_idx;
static FILE *trace_fp;
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
static char *trace_file_name = NULL;
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
/**
* Read a trace record from the trace buffer
*
* @idx Trace buffer index
* @record Trace record to fill
*
* Returns false if the record is not valid.
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
*/
static bool get_trace_record(unsigned int idx, TraceRecord *record)
{
if (!(trace_buf[idx].event & TRACE_RECORD_VALID)) {
return false;
}
__sync_synchronize(); /* read memory barrier before accessing record */
*record = trace_buf[idx];
record->event &= ~TRACE_RECORD_VALID;
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
return true;
}
/**
* Kick writeout thread
*
* @wait Whether to wait for writeout thread to complete
*/
static void flush_trace_file(bool wait)
{
pthread_mutex_lock(&trace_lock);
trace_available = true;
pthread_cond_signal(&trace_available_cond);
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
if (wait) {
pthread_cond_wait(&trace_empty_cond, &trace_lock);
}
pthread_mutex_unlock(&trace_lock);
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
}
static void wait_for_trace_records_available(void)
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
{
pthread_mutex_lock(&trace_lock);
while (!(trace_available && trace_writeout_enabled)) {
pthread_cond_signal(&trace_empty_cond);
pthread_cond_wait(&trace_available_cond, &trace_lock);
trace: Add trace-file command to open/close/flush trace file This patch adds the trace-file command: trace-file [on|off|flush] Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. The trace file is turned on by default but is only written out when the trace buffer becomes full. The flush operation can be used to force write out at any time. Turning off the trace file does not change the state of trace events; tracing will continue to the trace buffer. When the trace file is off, use "info trace" to display the contents of the trace buffer in memory. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> This commit also contains the trace-file sub-command from the following commit: commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd Author: Prerna Saxena <prerna@linux.vnet.ibm.com> Date: Wed Aug 4 16:23:54 2010 +0530 trace: Add options to specify trace file name at startup and runtime This patch adds an optional command line switch '-trace' to specify the filename to write traces to, when qemu starts. Eg, If compiled with the 'simple' trace backend, [temp@system]$ qemu -trace FILENAME IMAGE Allows the binary traces to be written to FILENAME instead of the option set at config-time. Also, this adds monitor sub-command 'set' to trace-file commands to dynamically change trace log file at runtime. Eg, (qemu)trace-file set FILENAME This allows one to set trace outputs to FILENAME from the default specified at startup. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-13 10:26:33 +02:00
}
trace_available = false;
pthread_mutex_unlock(&trace_lock);
}
static void *writeout_thread(void *opaque)
{
TraceRecord record;
unsigned int writeout_idx = 0;
unsigned int num_available, idx;
size_t unused __attribute__ ((unused));
for (;;) {
wait_for_trace_records_available();
num_available = trace_idx - writeout_idx;
if (num_available > TRACE_BUF_LEN) {
record = (TraceRecord){
.event = DROPPED_EVENT_ID,
.x1 = num_available,
};
unused = fwrite(&record, sizeof(record), 1, trace_fp);
writeout_idx += num_available;
}
idx = writeout_idx % TRACE_BUF_LEN;
while (get_trace_record(idx, &record)) {
trace_buf[idx].event = 0; /* clear valid bit */
unused = fwrite(&record, sizeof(record), 1, trace_fp);
idx = ++writeout_idx % TRACE_BUF_LEN;
}
fflush(trace_fp);
}
return NULL;
}
static void trace(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3,
uint64_t x4, uint64_t x5, uint64_t x6)
{
unsigned int idx;
uint64_t timestamp;
if (!trace_list[event].state) {
return;
}
timestamp = get_clock();
idx = __sync_fetch_and_add(&trace_idx, 1) % TRACE_BUF_LEN;
trace_buf[idx] = (TraceRecord){
.event = event,
.timestamp_ns = timestamp,
.x1 = x1,
.x2 = x2,
.x3 = x3,
.x4 = x4,
.x5 = x5,
.x6 = x6,
};
__sync_synchronize(); /* write barrier before marking as valid */
trace_buf[idx].event |= TRACE_RECORD_VALID;
if ((idx + 1) % TRACE_BUF_FLUSH_THRESHOLD == 0) {
flush_trace_file(false);
}
}
void trace0(TraceEventID event)
{
trace(event, 0, 0, 0, 0, 0, 0);
}
void trace1(TraceEventID event, uint64_t x1)
{
trace(event, x1, 0, 0, 0, 0, 0);
}
void trace2(TraceEventID event, uint64_t x1, uint64_t x2)
{
trace(event, x1, x2, 0, 0, 0, 0);
}
void trace3(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3)
{
trace(event, x1, x2, x3, 0, 0, 0);
}
void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4)
{
trace(event, x1, x2, x3, x4, 0, 0);
}
void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5)
{
trace(event, x1, x2, x3, x4, x5, 0);
}
void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6)
{
trace(event, x1, x2, x3, x4, x5, x6);
}
void st_set_trace_file_enabled(bool enable)
{
if (enable == !!trace_fp) {
return; /* no change */
}
/* Halt trace writeout */
flush_trace_file(true);
trace_writeout_enabled = false;
flush_trace_file(true);
if (enable) {
static const TraceRecord header = {
.event = HEADER_EVENT_ID,
.timestamp_ns = HEADER_MAGIC,
.x1 = HEADER_VERSION,
};
trace_fp = fopen(trace_file_name, "w");
if (!trace_fp) {
return;
}
if (fwrite(&header, sizeof header, 1, trace_fp) != 1) {
fclose(trace_fp);
trace_fp = NULL;
return;
}
/* Resume trace writeout */
trace_writeout_enabled = true;
flush_trace_file(false);
} else {
fclose(trace_fp);
trace_fp = NULL;
}
}
/**
* Set the name of a trace file
*
* @file The trace file name or NULL for the default name-<pid> set at
* config time
*/
bool st_set_trace_file(const char *file)
{
st_set_trace_file_enabled(false);
free(trace_file_name);
if (!file) {
if (asprintf(&trace_file_name, CONFIG_TRACE_FILE, getpid()) < 0) {
trace_file_name = NULL;
return false;
}
} else {
if (asprintf(&trace_file_name, "%s", file) < 0) {
trace_file_name = NULL;
return false;
}
}
st_set_trace_file_enabled(true);
return true;
}
void st_print_trace_file_status(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
{
stream_printf(stream, "Trace file \"%s\" %s.\n",
trace_file_name, trace_fp ? "on" : "off");
}
void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
{
unsigned int i;
for (i = 0; i < TRACE_BUF_LEN; i++) {
TraceRecord record;
if (!get_trace_record(i, &record)) {
continue;
}
stream_printf(stream, "Event %" PRIu64 " : %" PRIx64 " %" PRIx64
" %" PRIx64 " %" PRIx64 " %" PRIx64 " %" PRIx64 "\n",
record.event, record.x1, record.x2,
record.x3, record.x4, record.x5,
record.x6);
}
}
void st_flush_trace_buffer(void)
{
flush_trace_file(true);
}
void trace_print_events(FILE *stream, fprintf_function stream_printf)
{
unsigned int i;
for (i = 0; i < NR_TRACE_EVENTS; i++) {
stream_printf(stream, "%s [Event ID %u] : state %u\n",
trace_list[i].tp_name, i, trace_list[i].state);
}
}
bool trace_event_set_state(const char *name, bool state)
{
unsigned int i;
for (i = 0; i < NR_TRACE_EVENTS; i++) {
if (!strcmp(trace_list[i].tp_name, name)) {
trace_list[i].state = state;
return true;
}
}
return false;
}
bool trace_backend_init(const char *events, const char *file)
{
pthread_t thread;
pthread_attr_t attr;
sigset_t set, oldset;
int ret;
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
sigfillset(&set);
pthread_sigmask(SIG_SETMASK, &set, &oldset);
ret = pthread_create(&thread, &attr, writeout_thread, NULL);
pthread_sigmask(SIG_SETMASK, &oldset, NULL);
if (ret != 0) {
fprintf(stderr, "warning: unable to initialize simple trace backend\n");
} else {
atexit(st_flush_trace_buffer);
trace_backend_init_events(events);
st_set_trace_file(file);
}
return true;
}