qemu-e2k/hw/net/Makefile.objs

42 lines
1.5 KiB
Makefile
Raw Normal View History

common-obj-$(CONFIG_DP8393X) += dp8393x.o
common-obj-$(CONFIG_XEN_BACKEND) += xen_nic.o
# PCI network cards
common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
common-obj-$(CONFIG_E1000_PCI) += e1000.o
common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet_tx_pkt.o vmxnet_rx_pkt.o
common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet3.o
common-obj-$(CONFIG_SMC91C111) += smc91c111.o
common-obj-$(CONFIG_LAN9118) += lan9118.o
common-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
common-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
common-obj-$(CONFIG_XGMAC) += xgmac.o
common-obj-$(CONFIG_MIPSNET) += mipsnet.o
common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
common-obj-$(CONFIG_ALLWINNER_EMAC) += allwinner_emac.o
common-obj-$(CONFIG_CADENCE) += cadence_gem.o
common-obj-$(CONFIG_STELLARIS_ENET) += stellaris_enet.o
common-obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
obj-$(CONFIG_COLDFIRE) += mcf_fec.o
obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
obj-$(CONFIG_PSERIES) += spapr_llan.o
obj-$(CONFIG_XILINX_ETHLITE) += xilinx_ethlite.o
obj-$(CONFIG_VIRTIO) += virtio-net.o
obj-y += vhost_net.o
obj-$(CONFIG_ETSEC) += fsl_etsec/etsec.o fsl_etsec/registers.o \
fsl_etsec/rings.o fsl_etsec/miim.o
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
common-obj-$(CONFIG_ROCKER) += rocker/rocker.o rocker/rocker_fp.o \
rocker/rocker_desc.o rocker/rocker_world.o \
rocker/rocker_of_dpa.o