OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
2944d742f7
qemu-e2k/tests/qemu-iotests/039.out

78 lines
2.8 KiB
Plaintext
Raw Normal View History

qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
QA output created by 039
== Checking that image is clean on shutdown ==
qemu-iotests: Be more flexible with image creation options qemu-iotests already filters out image creation options that may be present or not in order to get the same output in both cases. However, often it only considers the default value of the option. Cover all valid values instead so that ./check -o name=value can be used successfull for all of them. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 15:14:28 +02:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
incompatible_features 0x0
No errors were found on the image.
== Creating a dirty image file ==
qemu-iotests: Be more flexible with image creation options qemu-iotests already filters out image creation options that may be present or not in order to get the same output in both cases. However, often it only considers the default value of the option. Cover all valid values instead so that ./check -o name=value can be used successfull for all of them. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 15:14:28 +02:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Fix core dump suppression in test 039 The shell script attempts to suppress core dumps like this: old_ulimit=$(ulimit -c) ulimit -c 0 $QEMU_IO arg... ulimit -c "$old_ulimit" This breaks the test hard unless the limit was zero to begin with! ulimit sets both hard and soft limit by default, and (re-)raising the hard limit requires privileges. Broken since it was added in commit dc68afe. Could be fixed by adding -S to set only the soft limit, but I'm not sure how portable that is in practice. Simply do it in a subshell instead, like this: (ulimit -c 0; exec $QEMU_IO arg...) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-14 15:12:34 +02:00
./039: Aborted ( ulimit -c 0; exec "$@" )
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
incompatible_features 0x1
ERROR cluster 5 refcount=0 reference=1
qemu-iotests: Adjust test result 039 The moved OFLAG_COPIED check in qcow2_check_refcounts results in a different output from test 039 (mismatches are now found after the general refcount check (as far as any remain)). This patch adjusts the expected test result accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-02 16:36:15 +02:00
ERROR OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=0
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
2 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
== Read-only access must still work ==
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
incompatible_features 0x1
== Repairing the image file must succeed ==
iotests: Fix test outputs 039, 060 and 061 all create images with referenced clusters having a refcount of 0. Because previous commits changed handling of such errors, these tests now have a different output. Fix it. Furthermore, 060 created a refblock with a refcount greater than one which now results in having to rebuild the refcount structure as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-22 14:09:42 +02:00
ERROR cluster 5 refcount=0 reference=1
Rebuilding refcount structure
Repairing cluster 1 refcount=1 reference=0
Repairing cluster 2 refcount=1 reference=0
block: add BLOCK_O_CHECK for qemu-img check Image formats with a dirty bit, like qed and qcow2, repair dirty image files upon open with BDRV_O_RDWR. Performing automatic repair when qemu-img check runs is not ideal because the bdrv_open() call repairs the image before the actual bdrv_check() call from qemu-img.c. Fix this "double repair" since it leads to confusing output from qemu-img check. Tell the block driver that this image is being opened just for bdrv_check(). This skips automatic repair and qemu-img.c can invoke it manually with bdrv_check(). Update the golden output for qemu-iotests 039 to reflect the new qemu-img check output. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-09 14:05:56 +02:00
The following inconsistencies were found and repaired:
0 leaked clusters
1 corruptions
Double checking the fixed image now...
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
No errors were found on the image.
incompatible_features 0x0
== Data should still be accessible after repair ==
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== Opening a dirty image read/write should repair it ==
qemu-iotests: Be more flexible with image creation options qemu-iotests already filters out image creation options that may be present or not in order to get the same output in both cases. However, often it only considers the default value of the option. Cover all valid values instead so that ./check -o name=value can be used successfull for all of them. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 15:14:28 +02:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Fix core dump suppression in test 039 The shell script attempts to suppress core dumps like this: old_ulimit=$(ulimit -c) ulimit -c 0 $QEMU_IO arg... ulimit -c "$old_ulimit" This breaks the test hard unless the limit was zero to begin with! ulimit sets both hard and soft limit by default, and (re-)raising the hard limit requires privileges. Broken since it was added in commit dc68afe. Could be fixed by adding -S to set only the soft limit, but I'm not sure how portable that is in practice. Simply do it in a subshell instead, like this: (ulimit -c 0; exec $QEMU_IO arg...) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-14 15:12:34 +02:00
./039: Aborted ( ulimit -c 0; exec "$@" )
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
incompatible_features 0x1
iotests: Fix test outputs 039, 060 and 061 all create images with referenced clusters having a refcount of 0. Because previous commits changed handling of such errors, these tests now have a different output. Fix it. Furthermore, 060 created a refblock with a refcount greater than one which now results in having to rebuild the refcount structure as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-22 14:09:42 +02:00
ERROR cluster 5 refcount=0 reference=1
Rebuilding refcount structure
Repairing cluster 1 refcount=1 reference=0
Repairing cluster 2 refcount=1 reference=0
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
incompatible_features 0x0
== Creating an image file with lazy_refcounts=off ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Fix core dump suppression in test 039 The shell script attempts to suppress core dumps like this: old_ulimit=$(ulimit -c) ulimit -c 0 $QEMU_IO arg... ulimit -c "$old_ulimit" This breaks the test hard unless the limit was zero to begin with! ulimit sets both hard and soft limit by default, and (re-)raising the hard limit requires privileges. Broken since it was added in commit dc68afe. Could be fixed by adding -S to set only the soft limit, but I'm not sure how portable that is in practice. Simply do it in a subshell instead, like this: (ulimit -c 0; exec $QEMU_IO arg...) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-14 15:12:34 +02:00
./039: Aborted ( ulimit -c 0; exec "$@" )
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
incompatible_features 0x0
No errors were found on the image.
qcow2: Flush metadata during read-only reopen If lazy refcounts are enabled for a backing file, committing to this backing file may leave it in a dirty state even if the commit succeeds. The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare() doesn't take care to flush metadata. In order to fix this, this patch also fixes qcow2_mark_clean(), which contains another ineffective bdrv_flush() call beause lazy refcounts are disabled only afterwards. All existing callers of qcow2_mark_clean() either don't modify refcounts or already flush manually, so that this fixes only a latent, but not yet actually triggerable bug. Another instance of the same problem is live snapshots. Again, a real corruption is prevented by an explicit flush for non-read-only images in external_snapshot_prepare(), but images using lazy refcounts stay dirty. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-03 13:47:50 +02:00
== Committing to a backing file with lazy_refcounts=on ==
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR/t.IMGFMT.base'
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Image committed.
incompatible_features 0x0
incompatible_features 0x0
No errors were found on the image.
No errors were found on the image.
qemu-iotests: add 039 qcow2 lazy refcounts test This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-27 10:05:24 +02:00
*** done
Reference in New Issue Copy Permalink