qemu-e2k/include/block/block.h

544 lines
22 KiB
C
Raw Normal View History

#ifndef BLOCK_H
#define BLOCK_H
#include "block/aio.h"
#include "qemu-common.h"
#include "qemu/option.h"
#include "block/coroutine.h"
#include "qapi/qmp/qobject.h"
#include "qapi-types.h"
/* block.c */
typedef struct BlockDriver BlockDriver;
typedef struct BlockJob BlockJob;
typedef struct BlockDriverInfo {
/* in bytes, 0 if irrelevant */
int cluster_size;
/* offset at which the VM state can be saved (0 if not possible) */
int64_t vm_state_offset;
bool is_dirty;
/*
* True if unallocated blocks read back as zeroes. This is equivalent
* to the the LBPRZ flag in the SCSI logical block provisioning page.
*/
bool unallocated_blocks_are_zero;
/*
* True if the driver can optimize writing zeroes by unmapping
* sectors. This is equivalent to the BLKDISCARDZEROES ioctl in Linux
* with the difference that in qemu a discard is allowed to silently
* fail. Therefore we have to use bdrv_write_zeroes with the
* BDRV_REQ_MAY_UNMAP flag for an optimized zero write with unmapping.
* After this call the driver has to guarantee that the contents read
* back as zero. It is additionally required that the block device is
* opened with BDRV_O_UNMAP flag for this to work.
*/
bool can_write_zeroes_with_unmap;
} BlockDriverInfo;
typedef struct BlockFragInfo {
uint64_t allocated_clusters;
uint64_t total_clusters;
uint64_t fragmented_clusters;
uint64_t compressed_clusters;
} BlockFragInfo;
/* Callbacks for block device models */
typedef struct BlockDevOps {
/*
* Runs when virtual media changed (monitor commands eject, change)
* Argument load is true on load and false on eject.
* Beware: doesn't run when a host device's physical media
* changes. Sure would be useful if it did.
block: Clean up remaining users of "removable" BlockDriverState member removable is a confused mess. It is true when an ide-cd, scsi-cd or floppy qdev is attached, or when the BlockDriverState was created with -drive if={floppy,sd} or -drive if={ide,scsi,xen,none},media=cdrom ("created removable"), except when an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached. Three users remain: 1. eject_device(), via bdrv_is_removable() uses it to determine whether a block device can eject media. 2. bdrv_info() is monitor command "info block". QMP documentation says "true if the device is removable, false otherwise". From the monitor user's point of view, the only sensible interpretation of "is removable" is "can eject media with monitor commands eject and change". A block device can eject media unless a device is attached that doesn't support it. Switch the two users over to new bdrv_dev_has_removable_media() that returns exactly that. 3. bdrv_getlength() uses to suppress its length cache when media can change (see commit 46a4e4e6). Media change is either monitor command change (updates the length cache), monitor command eject (doesn't update the length cache, easily fixable), or physical media change (invalidates length cache, not so easily fixable). I'm refraining from improving anything here, because this series is long enough already. Instead, I simply switch it over to bdrv_dev_has_removable_media() as well. This changes the behavior of the length cache and of monitor commands eject and change in two cases: a. drive not created removable, no device attached The commit makes the drive removable, and defeats the length cache. Example: -drive if=none b. drive created removable, but the attached drive is non-removable, and doesn't call bdrv_set_removable(..., 0) (most devices don't) The commit makes the drive non-removable, and enables the length cache. Example: -drive if=xen,media=cdrom -M xenpv The other non-removable devices that don't call bdrv_set_removable() can't currently use a drive created removable, either because they aren't qdevified, or because they lack a drive property. Won't stay that way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06 18:58:51 +02:00
* Device models with removable media must implement this callback.
*/
void (*change_media_cb)(void *opaque, bool load);
/*
* Runs when an eject request is issued from the monitor, the tray
* is closed, and the medium is locked.
* Device models that do not implement is_medium_locked will not need
* this callback. Device models that can lock the medium or tray might
* want to implement the callback and unlock the tray when "force" is
* true, even if they do not support eject requests.
*/
void (*eject_request_cb)(void *opaque, bool force);
/*
* Is the virtual tray open?
* Device models implement this only when the device has a tray.
*/
bool (*is_tray_open)(void *opaque);
/*
* Is the virtual medium locked into the device?
* Device models implement this only when device has such a lock.
*/
bool (*is_medium_locked)(void *opaque);
/*
* Runs when the size changed (e.g. monitor command block_resize)
*/
void (*resize_cb)(void *opaque);
} BlockDevOps;
typedef enum {
BDRV_REQ_COPY_ON_READ = 0x1,
BDRV_REQ_ZERO_WRITE = 0x2,
/* The BDRV_REQ_MAY_UNMAP flag is used to indicate that the block driver
* is allowed to optimize a write zeroes request by unmapping (discarding)
* blocks if it is guaranteed that the result will read back as
* zeroes. The flag is only passed to the driver if the block device is
* opened with BDRV_O_UNMAP.
*/
BDRV_REQ_MAY_UNMAP = 0x4,
} BdrvRequestFlags;
#define BDRV_O_RDWR 0x0002
#define BDRV_O_SNAPSHOT 0x0008 /* open the file read only and save writes in a snapshot */
#define BDRV_O_NOCACHE 0x0020 /* do not use the host page cache */
#define BDRV_O_CACHE_WB 0x0040 /* use write-back caching */
#define BDRV_O_NATIVE_AIO 0x0080 /* use native AIO instead of the thread pool */
#define BDRV_O_NO_BACKING 0x0100 /* don't open the backing file */
#define BDRV_O_NO_FLUSH 0x0200 /* disable flushing on this disk */
#define BDRV_O_COPY_ON_READ 0x0400 /* copy read backing sectors into image */
#define BDRV_O_INCOMING 0x0800 /* consistency hint for incoming migration */
#define BDRV_O_CHECK 0x1000 /* open solely for consistency check */
#define BDRV_O_ALLOW_RDWR 0x2000 /* allow reopen to change from r/o to r/w */
#define BDRV_O_UNMAP 0x4000 /* execute guest UNMAP/TRIM operations */
#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH)
#define BDRV_SECTOR_BITS 9
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
/* BDRV_BLOCK_DATA: data is read from bs->file or another file
* BDRV_BLOCK_ZERO: sectors read as zero
* BDRV_BLOCK_OFFSET_VALID: sector stored in bs->file as raw data
* BDRV_BLOCK_RAW: used internally to indicate that the request
* was answered by the raw driver and that one
* should look in bs->file directly.
*
* If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 represent the offset in
* bs->file where sector data can be read from as raw data.
*
* DATA == 0 && ZERO == 0 means that data is read from backing_hd if present.
*
* DATA ZERO OFFSET_VALID
* t t t sectors read as zero, bs->file is zero at offset
* t f t sectors read as valid from bs->file at offset
* f t t sectors preallocated, read as zero, bs->file not
* necessarily zero at offset
* f f t sectors preallocated but read from backing_hd,
* bs->file contains garbage at offset
* t t f sectors preallocated, read as zero, unknown offset
* t f f sectors read from unknown file or offset
* f t f not allocated or unknown offset, read as zero
* f f f not allocated or unknown offset, read from backing_hd
*/
#define BDRV_BLOCK_DATA 1
#define BDRV_BLOCK_ZERO 2
#define BDRV_BLOCK_OFFSET_VALID 4
#define BDRV_BLOCK_RAW 8
#define BDRV_BLOCK_OFFSET_MASK BDRV_SECTOR_MASK
typedef enum {
BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
} BlockErrorAction;
typedef QSIMPLEQ_HEAD(BlockReopenQueue, BlockReopenQueueEntry) BlockReopenQueue;
typedef struct BDRVReopenState {
BlockDriverState *bs;
int flags;
void *opaque;
} BDRVReopenState;
void bdrv_iostatus_enable(BlockDriverState *bs);
void bdrv_iostatus_reset(BlockDriverState *bs);
void bdrv_iostatus_disable(BlockDriverState *bs);
bool bdrv_iostatus_is_enabled(const BlockDriverState *bs);
void bdrv_iostatus_set_err(BlockDriverState *bs, int error);
void bdrv_info_print(Monitor *mon, const QObject *data);
void bdrv_info(Monitor *mon, QObject **ret_data);
void bdrv_stats_print(Monitor *mon, const QObject *data);
void bdrv_info_stats(Monitor *mon, QObject **ret_data);
/* disk I/O throttling */
void bdrv_io_limits_enable(BlockDriverState *bs);
void bdrv_io_limits_disable(BlockDriverState *bs);
void bdrv_init(void);
void bdrv_init_with_whitelist(void);
BlockDriver *bdrv_find_protocol(const char *filename,
bool allow_protocol_prefix);
BlockDriver *bdrv_find_format(const char *format_name);
BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
bool readonly);
int bdrv_create(BlockDriver *drv, const char* filename,
QEMUOptionParameter *options, Error **errp);
int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
Error **errp);
BlockDriverState *bdrv_new(const char *device_name);
Do not delete BlockDriverState when deleting the drive When removing a drive from the host-side via drive_del we currently have the following path: drive_del qemu_aio_flush() bdrv_close() // zaps bs->drv, which makes any subsequent I/O get // dropped. Works as designed drive_uninit() bdrv_delete() // frees the bs. Since the device is still connected to // bs, any subsequent I/O is a use-after-free. The value of bs->drv becomes unpredictable on free. As long as it remains null, I/O still gets dropped, however it could become non-null at any point after the free resulting SEGVs or other QEMU state corruption. To resolve this issue as simply as possible, we can chose to not actually delete the BlockDriverState pointer. Since bdrv_close() handles setting the drv pointer to NULL, we just need to remove the BlockDriverState from the QLIST that is used to enumerate the block devices. This is currently handled within bdrv_delete, so move this into its own function, bdrv_make_anon(). The result is that we can now invoke drive_del, this closes the file descriptors and sets BlockDriverState->drv to NULL which prevents futher IO to the device, and since we do not free BlockDriverState, we don't have to worry about the copy retained in the block devices. We also don't attempt to remove the qdev property since we are no longer deleting the BlockDriverState on drives with associated drives. This also allows for removing Drives with no devices associated either. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-03-30 03:51:47 +02:00
void bdrv_make_anon(BlockDriverState *bs);
void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old);
void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top);
int bdrv_parse_cache_flags(const char *mode, int *flags);
int bdrv_parse_discard_flags(const char *mode, int *flags);
int bdrv_file_open(BlockDriverState **pbs, const char *filename,
const char *reference, QDict *options, int flags,
Error **errp);
int bdrv_open_image(BlockDriverState **pbs, const char *filename,
QDict *options, const char *bdref_key, int flags,
bool force_raw, bool allow_none, Error **errp);
int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
int flags, BlockDriver *drv, Error **errp);
BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
BlockDriverState *bs, int flags);
int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp);
int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp);
int bdrv_reopen_prepare(BDRVReopenState *reopen_state,
BlockReopenQueue *queue, Error **errp);
void bdrv_reopen_commit(BDRVReopenState *reopen_state);
void bdrv_reopen_abort(BDRVReopenState *reopen_state);
void bdrv_close(BlockDriverState *bs);
void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify);
int bdrv_attach_dev(BlockDriverState *bs, void *dev);
void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev);
void bdrv_detach_dev(BlockDriverState *bs, void *dev);
void *bdrv_get_attached_dev(BlockDriverState *bs);
void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
void *opaque);
void bdrv_dev_eject_request(BlockDriverState *bs, bool force);
block: Clean up remaining users of "removable" BlockDriverState member removable is a confused mess. It is true when an ide-cd, scsi-cd or floppy qdev is attached, or when the BlockDriverState was created with -drive if={floppy,sd} or -drive if={ide,scsi,xen,none},media=cdrom ("created removable"), except when an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached. Three users remain: 1. eject_device(), via bdrv_is_removable() uses it to determine whether a block device can eject media. 2. bdrv_info() is monitor command "info block". QMP documentation says "true if the device is removable, false otherwise". From the monitor user's point of view, the only sensible interpretation of "is removable" is "can eject media with monitor commands eject and change". A block device can eject media unless a device is attached that doesn't support it. Switch the two users over to new bdrv_dev_has_removable_media() that returns exactly that. 3. bdrv_getlength() uses to suppress its length cache when media can change (see commit 46a4e4e6). Media change is either monitor command change (updates the length cache), monitor command eject (doesn't update the length cache, easily fixable), or physical media change (invalidates length cache, not so easily fixable). I'm refraining from improving anything here, because this series is long enough already. Instead, I simply switch it over to bdrv_dev_has_removable_media() as well. This changes the behavior of the length cache and of monitor commands eject and change in two cases: a. drive not created removable, no device attached The commit makes the drive removable, and defeats the length cache. Example: -drive if=none b. drive created removable, but the attached drive is non-removable, and doesn't call bdrv_set_removable(..., 0) (most devices don't) The commit makes the drive non-removable, and enables the length cache. Example: -drive if=xen,media=cdrom -M xenpv The other non-removable devices that don't call bdrv_set_removable() can't currently use a drive created removable, either because they aren't qdevified, or because they lack a drive property. Won't stay that way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06 18:58:51 +02:00
bool bdrv_dev_has_removable_media(BlockDriverState *bs);
bool bdrv_dev_is_tray_open(BlockDriverState *bs);
bool bdrv_dev_is_medium_locked(BlockDriverState *bs);
int bdrv_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags);
BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags,
BlockDriverCompletionFunc *cb, void *opaque);
int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags);
int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov);
int bdrv_pread(BlockDriverState *bs, int64_t offset,
void *buf, int count);
int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov);
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
/*
* Efficiently zero a region of the disk image. Note that this is a regular
* I/O request like read or write and should have a reasonable size. This
* function is not suitable for zeroing the entire image in a single request
* because it may allocate memory for the entire region.
*/
int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags);
BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
const char *backing_file);
int bdrv_get_backing_file_depth(BlockDriverState *bs);
int bdrv_truncate(BlockDriverState *bs, int64_t offset);
int64_t bdrv_getlength(BlockDriverState *bs);
int64_t bdrv_get_allocated_file_size(BlockDriverState *bs);
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
int bdrv_refresh_limits(BlockDriverState *bs);
int bdrv_commit(BlockDriverState *bs);
int bdrv_commit_all(void);
int bdrv_change_backing_file(BlockDriverState *bs,
const char *backing_file, const char *backing_fmt);
void bdrv_register(BlockDriver *bdrv);
int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
BlockDriverState *base);
BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
BlockDriverState *bs);
BlockDriverState *bdrv_find_base(BlockDriverState *bs);
typedef struct BdrvCheckResult {
int corruptions;
int leaks;
int check_errors;
int corruptions_fixed;
int leaks_fixed;
int64_t image_end_offset;
BlockFragInfo bfi;
} BdrvCheckResult;
typedef enum {
BDRV_FIX_LEAKS = 1,
BDRV_FIX_ERRORS = 2,
} BdrvCheckMode;
int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix);
int bdrv_amend_options(BlockDriverState *bs_new, QEMUOptionParameter *options);
/* external snapshots */
typedef enum {
BS_IS_A_FILTER,
BS_FILTER_PASS_DOWN,
BS_AUTHORIZATION_COUNT,
} BsAuthorization;
bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
BlockDriverState *candidate);
bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
BlockDriverState *candidate);
bool bdrv_is_first_non_filter(BlockDriverState *candidate);
/* async block I/O */
typedef void BlockDriverDirtyHandler(BlockDriverState *bs, int64_t sector,
int sector_num);
BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
void bdrv_aio_cancel(BlockDriverAIOCB *acb);
typedef struct BlockRequest {
/* Fields to be filled by multiwrite caller */
int64_t sector;
int nb_sectors;
int flags;
QEMUIOVector *qiov;
BlockDriverCompletionFunc *cb;
void *opaque;
/* Filled by multiwrite implementation */
int error;
} BlockRequest;
int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs,
int num_reqs);
/* sg packet commands */
int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf);
BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque);
/* Invalidate any cached metadata used by image formats */
void bdrv_invalidate_cache(BlockDriverState *bs);
void bdrv_invalidate_cache_all(void);
void bdrv_clear_incoming_migration_all(void);
/* Ensure contents are flushed to disk. */
int bdrv_flush(BlockDriverState *bs);
int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
int bdrv_flush_all(void);
void bdrv_close_all(void);
void bdrv_drain_all(void);
int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors);
int bdrv_co_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors);
int bdrv_has_zero_init_1(BlockDriverState *bs);
int bdrv_has_zero_init(BlockDriverState *bs);
bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs);
bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum);
int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
int *pnum);
int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
int64_t sector_num, int nb_sectors, int *pnum);
void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
BlockdevOnError on_write_error);
BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read);
BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error);
void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
bool is_read, int error);
int bdrv_is_read_only(BlockDriverState *bs);
int bdrv_is_sg(BlockDriverState *bs);
int bdrv_enable_write_cache(BlockDriverState *bs);
void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce);
int bdrv_is_inserted(BlockDriverState *bs);
int bdrv_media_changed(BlockDriverState *bs);
void bdrv_lock_medium(BlockDriverState *bs, bool locked);
void bdrv_eject(BlockDriverState *bs, bool eject_flag);
const char *bdrv_get_format_name(BlockDriverState *bs);
BlockDriverState *bdrv_find(const char *name);
BlockDriverState *bdrv_find_node(const char *node_name);
BlockDeviceInfoList *bdrv_named_nodes_list(void);
qmp: Allow to change password on named block driver states. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> There was two candidate ways to implement named node manipulation: 1) { 'command': 'block_passwd', 'data': {'*device': 'str', '*node-name': 'str', 'password': 'str'} } 2) { 'command': 'block_passwd', 'data': {'device': 'str', '*device-is-node': 'bool', 'password': 'str'} } Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to rewrite the QMP block interface for 2.0. Luiz does not like in 1 the fact that 2 fields are optional but one of them must be specified leading to an abuse of the QMP semantic. Kevin argumented that 2 what a clear abuse of the device field and would not be practical when reading fast some log file because the user would read "device" and think that a device is manipulated when it's in fact a node name. Documentation of 1 make it pretty clear what to do for the user. Kevin argued that all bs are node including devices ones so 2 does not make sense. Kevin also argued that rewriting the QMP block interface would not make disapear the current one. Kevin pushed the argument that making the QAPI generator compatible with the semantic of the operation would need a rewrite that no one has done yet. A vote has been done on the list to elect the version to use and 1 won. For reference the complete thread is: "[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver states." Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-23 21:31:35 +01:00
BlockDriverState *bdrv_lookup_bs(const char *device,
const char *node_name,
Error **errp);
BlockDriverState *bdrv_next(BlockDriverState *bs);
void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs),
void *opaque);
int bdrv_is_encrypted(BlockDriverState *bs);
int bdrv_key_required(BlockDriverState *bs);
int bdrv_set_key(BlockDriverState *bs, const char *key);
int bdrv_query_missing_keys(void);
void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
void *opaque);
const char *bdrv_get_device_name(BlockDriverState *bs);
int bdrv_get_flags(BlockDriverState *bs);
int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi);
ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs);
void bdrv_round_to_clusters(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
int64_t *cluster_sector_num,
int *cluster_nb_sectors);
const char *bdrv_get_encrypted_filename(BlockDriverState *bs);
void bdrv_get_backing_filename(BlockDriverState *bs,
char *filename, int filename_size);
void bdrv_get_full_backing_filename(BlockDriverState *bs,
char *dest, size_t sz);
int bdrv_is_snapshot(BlockDriverState *bs);
int path_is_absolute(const char *path);
void path_combine(char *dest, int dest_size,
const char *base_path,
const char *filename);
int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
int64_t pos, int size);
void bdrv_img_create(const char *filename, const char *fmt,
const char *base_filename, const char *base_fmt,
char *options, uint64_t img_size, int flags,
Error **errp, bool quiet);
/* Returns the alignment in bytes that is required so that no bounce buffer
* is required throughout the stack */
size_t bdrv_opt_mem_align(BlockDriverState *bs);
void bdrv_set_buffer_alignment(BlockDriverState *bs, int align);
void *qemu_blockalign(BlockDriverState *bs, size_t size);
bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov);
struct HBitmapIter;
typedef struct BdrvDirtyBitmap BdrvDirtyBitmap;
BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity);
void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap);
BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs);
int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector);
void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors);
void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors);
void bdrv_dirty_iter_init(BlockDriverState *bs,
BdrvDirtyBitmap *bitmap, struct HBitmapIter *hbi);
int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap);
void bdrv_enable_copy_on_read(BlockDriverState *bs);
void bdrv_disable_copy_on_read(BlockDriverState *bs);
void bdrv_ref(BlockDriverState *bs);
void bdrv_unref(BlockDriverState *bs);
void bdrv_set_in_use(BlockDriverState *bs, int in_use);
int bdrv_in_use(BlockDriverState *bs);
#ifdef CONFIG_LINUX_AIO
int raw_get_aio_fd(BlockDriverState *bs);
#else
static inline int raw_get_aio_fd(BlockDriverState *bs)
{
return -ENOTSUP;
}
#endif
enum BlockAcctType {
BDRV_ACCT_READ,
BDRV_ACCT_WRITE,
BDRV_ACCT_FLUSH,
BDRV_MAX_IOTYPE,
};
typedef struct BlockAcctCookie {
int64_t bytes;
int64_t start_time_ns;
enum BlockAcctType type;
} BlockAcctCookie;
void bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie,
int64_t bytes, enum BlockAcctType type);
void bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie);
typedef enum {
BLKDBG_L1_UPDATE,
BLKDBG_L1_GROW_ALLOC_TABLE,
BLKDBG_L1_GROW_WRITE_TABLE,
BLKDBG_L1_GROW_ACTIVATE_TABLE,
BLKDBG_L2_LOAD,
BLKDBG_L2_UPDATE,
BLKDBG_L2_UPDATE_COMPRESSED,
BLKDBG_L2_ALLOC_COW_READ,
BLKDBG_L2_ALLOC_WRITE,
BLKDBG_READ_AIO,
BLKDBG_READ_BACKING_AIO,
BLKDBG_READ_COMPRESSED,
BLKDBG_WRITE_AIO,
BLKDBG_WRITE_COMPRESSED,
BLKDBG_VMSTATE_LOAD,
BLKDBG_VMSTATE_SAVE,
BLKDBG_COW_READ,
BLKDBG_COW_WRITE,
BLKDBG_REFTABLE_LOAD,
BLKDBG_REFTABLE_GROW,
BLKDBG_REFTABLE_UPDATE,
BLKDBG_REFBLOCK_LOAD,
BLKDBG_REFBLOCK_UPDATE,
BLKDBG_REFBLOCK_UPDATE_PART,
BLKDBG_REFBLOCK_ALLOC,
BLKDBG_REFBLOCK_ALLOC_HOOKUP,
BLKDBG_REFBLOCK_ALLOC_WRITE,
BLKDBG_REFBLOCK_ALLOC_WRITE_BLOCKS,
BLKDBG_REFBLOCK_ALLOC_WRITE_TABLE,
BLKDBG_REFBLOCK_ALLOC_SWITCH_TABLE,
BLKDBG_CLUSTER_ALLOC,
BLKDBG_CLUSTER_ALLOC_BYTES,
BLKDBG_CLUSTER_FREE,
BLKDBG_FLUSH_TO_OS,
BLKDBG_FLUSH_TO_DISK,
BLKDBG_EVENT_MAX,
} BlkDebugEvent;
#define BLKDBG_EVENT(bs, evt) bdrv_debug_event(bs, evt)
void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event);
int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
const char *tag);
int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag);
int bdrv_debug_resume(BlockDriverState *bs, const char *tag);
bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag);
#endif