qemu-e2k/qom/object_interfaces.c

189 lines
4.3 KiB
C
Raw Normal View History

#include "qemu/osdep.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qom/object_interfaces.h"
#include "qemu/module.h"
#include "qapi-visit.h"
#include "qapi/opts-visitor.h"
void user_creatable_complete(Object *obj, Error **errp)
{
UserCreatableClass *ucc;
UserCreatable *uc =
(UserCreatable *)object_dynamic_cast(obj, TYPE_USER_CREATABLE);
if (!uc) {
return;
}
ucc = USER_CREATABLE_GET_CLASS(uc);
if (ucc->complete) {
ucc->complete(uc, errp);
}
}
bool user_creatable_can_be_deleted(UserCreatable *uc, Error **errp)
{
UserCreatableClass *ucc = USER_CREATABLE_GET_CLASS(uc);
if (ucc->can_be_deleted) {
return ucc->can_be_deleted(uc, errp);
} else {
return true;
}
}
Object *user_creatable_add_type(const char *type, const char *id,
const QDict *qdict,
Visitor *v, Error **errp)
{
Object *obj;
ObjectClass *klass;
const QDictEntry *e;
Error *local_err = NULL;
klass = object_class_by_name(type);
if (!klass) {
error_setg(errp, "invalid object type: %s", type);
return NULL;
}
if (!object_class_dynamic_cast(klass, TYPE_USER_CREATABLE)) {
error_setg(errp, "object type '%s' isn't supported by object-add",
type);
return NULL;
}
if (object_class_is_abstract(klass)) {
error_setg(errp, "object type '%s' is abstract", type);
return NULL;
}
qom: Wrap prop visit in visit_start_struct The qmp-input visitor was allowing callers to play rather fast and loose: when visiting a QDict, you could grab members of the root dictionary without first pushing into the dict; the final such culprit was the QOM code for converting to and from object properties. But we are about to tighten the input visitor, at which point user_creatable_add_type() as called with a QMP input visitor via qmp_object_add() MUST follow the same paradigms as everyone else, of pushing into the struct before grabbing its keys. The use of 'err ? NULL : &err' is temporary; a later patch will clean that up when it splits visit_end_struct(). Furthermore, note that both callers always pass qdict, so we can convert the conditional into an assert and reduce indentation. The change has no impact to the testsuite now, but is required to avoid a failure in tests/test-netfilter once qmp-input is made stricter to detect inconsistent 'name' arguments on the root visit. Since user_creatable_add_type() is also called with OptsVisitor through user_creatable_add_opts(), we must also check that there is no negative impact there; both pre- and post-patch, we see: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found That is, the only new checking that the new visit_end_struct() can perform is for excess input, but we already catch excess input earlier in object_property_set(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:17 +02:00
assert(qdict);
obj = object_new(type);
qom: Wrap prop visit in visit_start_struct The qmp-input visitor was allowing callers to play rather fast and loose: when visiting a QDict, you could grab members of the root dictionary without first pushing into the dict; the final such culprit was the QOM code for converting to and from object properties. But we are about to tighten the input visitor, at which point user_creatable_add_type() as called with a QMP input visitor via qmp_object_add() MUST follow the same paradigms as everyone else, of pushing into the struct before grabbing its keys. The use of 'err ? NULL : &err' is temporary; a later patch will clean that up when it splits visit_end_struct(). Furthermore, note that both callers always pass qdict, so we can convert the conditional into an assert and reduce indentation. The change has no impact to the testsuite now, but is required to avoid a failure in tests/test-netfilter once qmp-input is made stricter to detect inconsistent 'name' arguments on the root visit. Since user_creatable_add_type() is also called with OptsVisitor through user_creatable_add_opts(), we must also check that there is no negative impact there; both pre- and post-patch, we see: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found That is, the only new checking that the new visit_end_struct() can perform is for excess input, but we already catch excess input earlier in object_property_set(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:17 +02:00
visit_start_struct(v, NULL, NULL, 0, &local_err);
if (local_err) {
goto out;
}
for (e = qdict_first(qdict); e; e = qdict_next(qdict, e)) {
object_property_set(obj, v, e->key, &local_err);
if (local_err) {
break;
}
}
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:27 +02:00
if (!local_err) {
visit_check_struct(v, &local_err);
}
2016-06-09 18:48:34 +02:00
visit_end_struct(v, NULL);
qom: Wrap prop visit in visit_start_struct The qmp-input visitor was allowing callers to play rather fast and loose: when visiting a QDict, you could grab members of the root dictionary without first pushing into the dict; the final such culprit was the QOM code for converting to and from object properties. But we are about to tighten the input visitor, at which point user_creatable_add_type() as called with a QMP input visitor via qmp_object_add() MUST follow the same paradigms as everyone else, of pushing into the struct before grabbing its keys. The use of 'err ? NULL : &err' is temporary; a later patch will clean that up when it splits visit_end_struct(). Furthermore, note that both callers always pass qdict, so we can convert the conditional into an assert and reduce indentation. The change has no impact to the testsuite now, but is required to avoid a failure in tests/test-netfilter once qmp-input is made stricter to detect inconsistent 'name' arguments on the root visit. Since user_creatable_add_type() is also called with OptsVisitor through user_creatable_add_opts(), we must also check that there is no negative impact there; both pre- and post-patch, we see: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found That is, the only new checking that the new visit_end_struct() can perform is for excess input, but we already catch excess input earlier in object_property_set(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:17 +02:00
if (local_err) {
goto out;
}
object_property_add_child(object_get_objects_root(),
id, obj, &local_err);
if (local_err) {
goto out;
}
user_creatable_complete(obj, &local_err);
if (local_err) {
object_property_del(object_get_objects_root(),
id, &error_abort);
goto out;
}
out:
if (local_err) {
error_propagate(errp, local_err);
object_unref(obj);
return NULL;
}
return obj;
}
Object *user_creatable_add_opts(QemuOpts *opts, Error **errp)
{
Visitor *v;
QDict *pdict;
Object *obj;
const char *id = qemu_opts_id(opts);
const char *type = qemu_opt_get(opts, "qom-type");
if (!type) {
error_setg(errp, QERR_MISSING_PARAMETER, "qom-type");
return NULL;
}
if (!id) {
error_setg(errp, QERR_MISSING_PARAMETER, "id");
return NULL;
}
pdict = qemu_opts_to_qdict(opts, NULL);
qdict_del(pdict, "qom-type");
qdict_del(pdict, "id");
v = opts_visitor_new(opts);
obj = user_creatable_add_type(type, id, pdict, v, errp);
visit_free(v);
QDECREF(pdict);
return obj;
}
int user_creatable_add_opts_foreach(void *opaque, QemuOpts *opts, Error **errp)
{
bool (*type_predicate)(const char *) = opaque;
Object *obj = NULL;
qom: -object error messages lost location, restore it qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-27 16:29:09 +02:00
Error *err = NULL;
const char *type;
type = qemu_opt_get(opts, "qom-type");
if (type && type_predicate &&
!type_predicate(type)) {
return 0;
}
qom: -object error messages lost location, restore it qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-27 16:29:09 +02:00
obj = user_creatable_add_opts(opts, &err);
if (!obj) {
qom: -object error messages lost location, restore it qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-27 16:29:09 +02:00
error_report_err(err);
return -1;
}
object_unref(obj);
return 0;
}
void user_creatable_del(const char *id, Error **errp)
{
Object *container;
Object *obj;
container = object_get_objects_root();
obj = object_resolve_path_component(container, id);
if (!obj) {
error_setg(errp, "object '%s' not found", id);
return;
}
if (!user_creatable_can_be_deleted(USER_CREATABLE(obj), errp)) {
error_setg(errp, "object '%s' is in use, can not be deleted", id);
return;
}
object_unparent(obj);
}
static void register_types(void)
{
static const TypeInfo uc_interface_info = {
.name = TYPE_USER_CREATABLE,
.parent = TYPE_INTERFACE,
.class_size = sizeof(UserCreatableClass),
};
type_register_static(&uc_interface_info);
}
type_init(register_types)