2019-04-29 15:51:09 +02:00
|
|
|
QA output created by 249
|
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576
|
iotests: Specify explicit backing format where sensible
There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 22:39:52 +02:00
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
|
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int backing_fmt=IMGFMT
|
2019-11-14 22:34:14 +01:00
|
|
|
{ 'execute': 'qmp_capabilities' }
|
2019-04-29 15:51:09 +02:00
|
|
|
{"return": {}}
|
|
|
|
|
|
|
|
|
|
=== Send a write command to a drive opened in read-only mode (1)
|
|
|
|
|
|
iotests: Fix _send_qemu_cmd with bash 5.1
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-12-17 16:38:03 +01:00
|
|
|
{ 'execute': 'human-monitor-command',
|
|
|
|
|
'arguments': {'command-line': 'qemu-io none0 "aio_write 0 2k"'}}
|
2019-04-29 15:51:09 +02:00
|
|
|
{"return": "Block node is read-onlyrn"}
|
|
|
|
|
|
|
|
|
|
=== Run block-commit on base using an invalid filter node name
|
|
|
|
|
|
iotests: Fix _send_qemu_cmd with bash 5.1
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-12-17 16:38:03 +01:00
|
|
|
{ 'execute': 'block-commit',
|
|
|
|
|
'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int',
|
|
|
|
|
'filter-node-name': '1234'}}
|
2019-04-29 15:51:09 +02:00
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
|
|
|
|
|
{"error": {"class": "GenericError", "desc": "Invalid node name"}}
|
|
|
|
|
|
|
|
|
|
=== Send a write command to a drive opened in read-only mode (2)
|
|
|
|
|
|
iotests: Fix _send_qemu_cmd with bash 5.1
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-12-17 16:38:03 +01:00
|
|
|
{ 'execute': 'human-monitor-command',
|
|
|
|
|
'arguments': {'command-line': 'qemu-io none0 "aio_write 0 2k"'}}
|
2019-04-29 15:51:09 +02:00
|
|
|
{"return": "Block node is read-onlyrn"}
|
|
|
|
|
|
|
|
|
|
=== Run block-commit on base using the default filter node name
|
|
|
|
|
|
iotests: Fix _send_qemu_cmd with bash 5.1
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-12-17 16:38:03 +01:00
|
|
|
{ 'execute': 'block-commit',
|
|
|
|
|
'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}
|
2019-04-29 15:51:09 +02:00
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}}
|
|
|
|
|
{"return": {}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "job0"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "job0"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "job0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "commit"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "job0"}}
|
|
|
|
|
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
|
|
|
|
|
|
|
|
|
|
=== Send a write command to a drive opened in read-only mode (3)
|
|
|
|
|
|
iotests: Fix _send_qemu_cmd with bash 5.1
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-12-17 16:38:03 +01:00
|
|
|
{ 'execute': 'human-monitor-command',
|
|
|
|
|
'arguments': {'command-line': 'qemu-io none0 "aio_write 0 2k"'}}
|
2019-04-29 15:51:09 +02:00
|
|
|
{"return": "Block node is read-onlyrn"}
|
|
|
|
|
*** done
|