qemu-e2k/hw/s390x/css.c

2604 lines
75 KiB
C
Raw Normal View History

/*
* Channel subsystem base support.
*
* Copyright 2012 IBM Corp.
* Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or (at
* your option) any later version. See the COPYING file in the top-level
* directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/bitops.h"
s390x/css: catch section mismatch on load Prior to the virtio-ccw-2.7 machine (and commit 2a79eb1a), our virtio devices residing under the virtual-css bus do not have qdev_path based migration stream identifiers (because their qdev_path is NULL). The ids are instead generated when the device is registered as a composition of the so called idstr, which takes the vmsd name as its value, and an instance_id, which is which is calculated as a maximal instance_id registered with the same idstr plus one, or zero (if none was registered previously). That means, under certain circumstances, one device might try, and even succeed, to load the state of a different device. This can lead to trouble. Let us fail the migration if the above problem is detected during load. How to reproduce the problem: 1) start qemu-system-s390x making sure you have the following devices defined on your command line: -device virtio-rng-ccw,id=rng1,devno=fe.0.0001 -device virtio-rng-ccw,id=rng2,devno=fe.0.0002 2) detach the devices and reattach in reverse order using the monitor: (qemu) device_del rng1 (qemu) device_del rng2 (qemu) device_add virtio-rng-ccw,id=rng2,devno=fe.0.0002 (qemu) device_add virtio-rng-ccw,id=rng1,devno=fe.0.0001 3) save the state of the vm into a temporary file and quit QEMU: (qemu) migrate "exec:gzip -c > /tmp/tmp_vmstate.gz" (qemu) q 4) use your command line from step 1 with -incoming "exec:gzip -c -d /tmp/tmp_vmstate.gz" appended to reproduce the problem (while trying to to load the saved vm) CC: qemu-stable@nongnu.org Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-Id: <20170518111405.56947-1-pasic@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-05-18 13:14:05 +02:00
#include "qemu/error-report.h"
#include "exec/address-spaces.h"
#include "cpu.h"
#include "hw/s390x/ioinst.h"
#include "hw/qdev-properties.h"
#include "hw/s390x/css.h"
#include "trace.h"
#include "hw/s390x/s390_flic.h"
#include "hw/s390x/s390-virtio-ccw.h"
#include "hw/s390x/s390-ccw.h"
typedef struct CrwContainer {
CRW crw;
QTAILQ_ENTRY(CrwContainer) sibling;
} CrwContainer;
static const VMStateDescription vmstate_crw = {
.name = "s390_crw",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT16(flags, CRW),
VMSTATE_UINT16(rsid, CRW),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_crw_container = {
.name = "s390_crw_container",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_STRUCT(crw, CrwContainer, 0, vmstate_crw, CRW),
VMSTATE_END_OF_LIST()
},
};
typedef struct ChpInfo {
uint8_t in_use;
uint8_t type;
uint8_t is_virtual;
} ChpInfo;
static const VMStateDescription vmstate_chp_info = {
.name = "s390_chp_info",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(in_use, ChpInfo),
VMSTATE_UINT8(type, ChpInfo),
VMSTATE_UINT8(is_virtual, ChpInfo),
VMSTATE_END_OF_LIST()
}
};
typedef struct SubchSet {
SubchDev *sch[MAX_SCHID + 1];
unsigned long schids_used[BITS_TO_LONGS(MAX_SCHID + 1)];
unsigned long devnos_used[BITS_TO_LONGS(MAX_SCHID + 1)];
} SubchSet;
static const VMStateDescription vmstate_scsw = {
.name = "s390_scsw",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT16(flags, SCSW),
VMSTATE_UINT16(ctrl, SCSW),
VMSTATE_UINT32(cpa, SCSW),
VMSTATE_UINT8(dstat, SCSW),
VMSTATE_UINT8(cstat, SCSW),
VMSTATE_UINT16(count, SCSW),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_pmcw = {
.name = "s390_pmcw",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(intparm, PMCW),
VMSTATE_UINT16(flags, PMCW),
VMSTATE_UINT16(devno, PMCW),
VMSTATE_UINT8(lpm, PMCW),
VMSTATE_UINT8(pnom, PMCW),
VMSTATE_UINT8(lpum, PMCW),
VMSTATE_UINT8(pim, PMCW),
VMSTATE_UINT16(mbi, PMCW),
VMSTATE_UINT8(pom, PMCW),
VMSTATE_UINT8(pam, PMCW),
VMSTATE_UINT8_ARRAY(chpid, PMCW, 8),
VMSTATE_UINT32(chars, PMCW),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_schib = {
.name = "s390_schib",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_STRUCT(pmcw, SCHIB, 0, vmstate_pmcw, PMCW),
VMSTATE_STRUCT(scsw, SCHIB, 0, vmstate_scsw, SCSW),
VMSTATE_UINT64(mba, SCHIB),
VMSTATE_UINT8_ARRAY(mda, SCHIB, 4),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_ccw1 = {
.name = "s390_ccw1",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(cmd_code, CCW1),
VMSTATE_UINT8(flags, CCW1),
VMSTATE_UINT16(count, CCW1),
VMSTATE_UINT32(cda, CCW1),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_ciw = {
.name = "s390_ciw",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(type, CIW),
VMSTATE_UINT8(command, CIW),
VMSTATE_UINT16(count, CIW),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_sense_id = {
.name = "s390_sense_id",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(reserved, SenseId),
VMSTATE_UINT16(cu_type, SenseId),
VMSTATE_UINT8(cu_model, SenseId),
VMSTATE_UINT16(dev_type, SenseId),
VMSTATE_UINT8(dev_model, SenseId),
VMSTATE_UINT8(unused, SenseId),
VMSTATE_STRUCT_ARRAY(ciw, SenseId, MAX_CIWS, 0, vmstate_ciw, CIW),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_orb = {
.name = "s390_orb",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(intparm, ORB),
VMSTATE_UINT16(ctrl0, ORB),
VMSTATE_UINT8(lpm, ORB),
VMSTATE_UINT8(ctrl1, ORB),
VMSTATE_UINT32(cpa, ORB),
VMSTATE_END_OF_LIST()
}
};
static bool vmstate_schdev_orb_needed(void *opaque)
{
return css_migration_enabled();
}
static const VMStateDescription vmstate_schdev_orb = {
.name = "s390_subch_dev/orb",
.version_id = 1,
.minimum_version_id = 1,
.needed = vmstate_schdev_orb_needed,
.fields = (VMStateField[]) {
VMSTATE_STRUCT(orb, SubchDev, 1, vmstate_orb, ORB),
VMSTATE_END_OF_LIST()
}
};
static int subch_dev_post_load(void *opaque, int version_id);
static int subch_dev_pre_save(void *opaque);
const char err_hint_devno[] = "Devno mismatch, tried to load wrong section!"
" Likely reason: some sequences of plug and unplug can break"
" migration for machine versions prior to 2.7 (known design flaw).";
const VMStateDescription vmstate_subch_dev = {
.name = "s390_subch_dev",
.version_id = 1,
.minimum_version_id = 1,
.post_load = subch_dev_post_load,
.pre_save = subch_dev_pre_save,
.fields = (VMStateField[]) {
VMSTATE_UINT8_EQUAL(cssid, SubchDev, "Bug!"),
VMSTATE_UINT8_EQUAL(ssid, SubchDev, "Bug!"),
VMSTATE_UINT16(migrated_schid, SubchDev),
VMSTATE_UINT16_EQUAL(devno, SubchDev, err_hint_devno),
VMSTATE_BOOL(thinint_active, SubchDev),
VMSTATE_STRUCT(curr_status, SubchDev, 0, vmstate_schib, SCHIB),
VMSTATE_UINT8_ARRAY(sense_data, SubchDev, 32),
VMSTATE_UINT64(channel_prog, SubchDev),
VMSTATE_STRUCT(last_cmd, SubchDev, 0, vmstate_ccw1, CCW1),
VMSTATE_BOOL(last_cmd_valid, SubchDev),
VMSTATE_STRUCT(id, SubchDev, 0, vmstate_sense_id, SenseId),
VMSTATE_BOOL(ccw_fmt_1, SubchDev),
VMSTATE_UINT8(ccw_no_data_cnt, SubchDev),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_schdev_orb,
NULL
}
};
typedef struct IndAddrPtrTmp {
IndAddr **parent;
uint64_t addr;
int32_t len;
} IndAddrPtrTmp;
static int post_load_ind_addr(void *opaque, int version_id)
{
IndAddrPtrTmp *ptmp = opaque;
IndAddr **ind_addr = ptmp->parent;
if (ptmp->len != 0) {
*ind_addr = get_indicator(ptmp->addr, ptmp->len);
} else {
*ind_addr = NULL;
}
return 0;
}
static int pre_save_ind_addr(void *opaque)
{
IndAddrPtrTmp *ptmp = opaque;
IndAddr *ind_addr = *(ptmp->parent);
if (ind_addr != NULL) {
ptmp->len = ind_addr->len;
ptmp->addr = ind_addr->addr;
} else {
ptmp->len = 0;
ptmp->addr = 0L;
}
return 0;
}
const VMStateDescription vmstate_ind_addr_tmp = {
.name = "s390_ind_addr_tmp",
.pre_save = pre_save_ind_addr,
.post_load = post_load_ind_addr,
.fields = (VMStateField[]) {
VMSTATE_INT32(len, IndAddrPtrTmp),
VMSTATE_UINT64(addr, IndAddrPtrTmp),
VMSTATE_END_OF_LIST()
}
};
const VMStateDescription vmstate_ind_addr = {
.name = "s390_ind_addr_tmp",
.fields = (VMStateField[]) {
VMSTATE_WITH_TMP(IndAddr*, IndAddrPtrTmp, vmstate_ind_addr_tmp),
VMSTATE_END_OF_LIST()
}
};
typedef struct CssImage {
SubchSet *sch_set[MAX_SSID + 1];
ChpInfo chpids[MAX_CHPID + 1];
} CssImage;
static const VMStateDescription vmstate_css_img = {
.name = "s390_css_img",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
/* Subchannel sets have no relevant state. */
VMSTATE_STRUCT_ARRAY(chpids, CssImage, MAX_CHPID + 1, 0,
vmstate_chp_info, ChpInfo),
VMSTATE_END_OF_LIST()
}
};
typedef struct IoAdapter {
uint32_t id;
uint8_t type;
uint8_t isc;
uint8_t flags;
} IoAdapter;
typedef struct ChannelSubSys {
QTAILQ_HEAD(, CrwContainer) pending_crws;
bool sei_pending;
bool do_crw_mchk;
bool crws_lost;
uint8_t max_cssid;
uint8_t max_ssid;
bool chnmon_active;
uint64_t chnmon_area;
CssImage *css[MAX_CSSID + 1];
uint8_t default_cssid;
/* don't migrate, see css_register_io_adapters */
IoAdapter *io_adapters[CSS_IO_ADAPTER_TYPE_NUMS][MAX_ISC + 1];
/* don't migrate, see get_indicator and IndAddrPtrTmp */
QTAILQ_HEAD(, IndAddr) indicator_addresses;
} ChannelSubSys;
static const VMStateDescription vmstate_css = {
.name = "s390_css",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_QTAILQ_V(pending_crws, ChannelSubSys, 1, vmstate_crw_container,
CrwContainer, sibling),
VMSTATE_BOOL(sei_pending, ChannelSubSys),
VMSTATE_BOOL(do_crw_mchk, ChannelSubSys),
VMSTATE_BOOL(crws_lost, ChannelSubSys),
/* These were kind of migrated by virtio */
VMSTATE_UINT8(max_cssid, ChannelSubSys),
VMSTATE_UINT8(max_ssid, ChannelSubSys),
VMSTATE_BOOL(chnmon_active, ChannelSubSys),
VMSTATE_UINT64(chnmon_area, ChannelSubSys),
VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(css, ChannelSubSys, MAX_CSSID + 1,
0, vmstate_css_img, CssImage),
VMSTATE_UINT8(default_cssid, ChannelSubSys),
VMSTATE_END_OF_LIST()
}
};
static ChannelSubSys channel_subsys = {
.pending_crws = QTAILQ_HEAD_INITIALIZER(channel_subsys.pending_crws),
.do_crw_mchk = true,
.sei_pending = false,
.crws_lost = false,
.chnmon_active = false,
.indicator_addresses =
QTAILQ_HEAD_INITIALIZER(channel_subsys.indicator_addresses),
};
static int subch_dev_pre_save(void *opaque)
{
SubchDev *s = opaque;
/* Prepare remote_schid for save */
s->migrated_schid = s->schid;
return 0;
}
static int subch_dev_post_load(void *opaque, int version_id)
{
SubchDev *s = opaque;
/* Re-assign the subchannel to remote_schid if necessary */
if (s->migrated_schid != s->schid) {
if (css_find_subch(true, s->cssid, s->ssid, s->schid) == s) {
/*
* Cleanup the slot before moving to s->migrated_schid provided
* it still belongs to us, i.e. it was not changed by previous
* invocation of this function.
*/
css_subch_assign(s->cssid, s->ssid, s->schid, s->devno, NULL);
}
/* It's OK to re-assign without a prior de-assign. */
s->schid = s->migrated_schid;
css_subch_assign(s->cssid, s->ssid, s->schid, s->devno, s);
}
if (css_migration_enabled()) {
/* No compat voodoo to do ;) */
return 0;
}
/*
* Hack alert. If we don't migrate the channel subsystem status
* we still need to find out if the guest enabled mss/mcss-e.
* If the subchannel is enabled, it certainly was able to access it,
* so adjust the max_ssid/max_cssid values for relevant ssid/cssid
* values. This is not watertight, but better than nothing.
*/
if (s->curr_status.pmcw.flags & PMCW_FLAGS_MASK_ENA) {
if (s->ssid) {
channel_subsys.max_ssid = MAX_SSID;
}
if (s->cssid != channel_subsys.default_cssid) {
channel_subsys.max_cssid = MAX_CSSID;
}
}
return 0;
}
void css_register_vmstate(void)
{
vmstate_register(NULL, 0, &vmstate_css, &channel_subsys);
}
IndAddr *get_indicator(hwaddr ind_addr, int len)
{
IndAddr *indicator;
QTAILQ_FOREACH(indicator, &channel_subsys.indicator_addresses, sibling) {
if (indicator->addr == ind_addr) {
indicator->refcnt++;
return indicator;
}
}
indicator = g_new0(IndAddr, 1);
indicator->addr = ind_addr;
indicator->len = len;
indicator->refcnt = 1;
QTAILQ_INSERT_TAIL(&channel_subsys.indicator_addresses,
indicator, sibling);
return indicator;
}
static int s390_io_adapter_map(AdapterInfo *adapter, uint64_t map_addr,
bool do_map)
{
S390FLICState *fs = s390_get_flic();
S390FLICStateClass *fsc = s390_get_flic_class(fs);
return fsc->io_adapter_map(fs, adapter->adapter_id, map_addr, do_map);
}
void release_indicator(AdapterInfo *adapter, IndAddr *indicator)
{
assert(indicator->refcnt > 0);
indicator->refcnt--;
if (indicator->refcnt > 0) {
return;
}
QTAILQ_REMOVE(&channel_subsys.indicator_addresses, indicator, sibling);
if (indicator->map) {
s390_io_adapter_map(adapter, indicator->map, false);
}
g_free(indicator);
}
int map_indicator(AdapterInfo *adapter, IndAddr *indicator)
{
int ret;
if (indicator->map) {
return 0; /* already mapped is not an error */
}
indicator->map = indicator->addr;
ret = s390_io_adapter_map(adapter, indicator->map, true);
if ((ret != 0) && (ret != -ENOSYS)) {
goto out_err;
}
return 0;
out_err:
indicator->map = 0;
return ret;
}
int css_create_css_image(uint8_t cssid, bool default_image)
{
trace_css_new_image(cssid, default_image ? "(default)" : "");
/* 255 is reserved */
if (cssid == 255) {
return -EINVAL;
}
if (channel_subsys.css[cssid]) {
return -EBUSY;
}
channel_subsys.css[cssid] = g_new0(CssImage, 1);
if (default_image) {
channel_subsys.default_cssid = cssid;
}
return 0;
}
uint32_t css_get_adapter_id(CssIoAdapterType type, uint8_t isc)
{
if (type >= CSS_IO_ADAPTER_TYPE_NUMS || isc > MAX_ISC ||
!channel_subsys.io_adapters[type][isc]) {
return -1;
}
return channel_subsys.io_adapters[type][isc]->id;
}
/**
* css_register_io_adapters: Register I/O adapters per ISC during init
*
* @swap: an indication if byte swap is needed.
* @maskable: an indication if the adapter is subject to the mask operation.
* @flags: further characteristics of the adapter.
* e.g. suppressible, an indication if the adapter is subject to AIS.
* @errp: location to store error information.
*/
void css_register_io_adapters(CssIoAdapterType type, bool swap, bool maskable,
uint8_t flags, Error **errp)
{
uint32_t id;
int ret, isc;
IoAdapter *adapter;
S390FLICState *fs = s390_get_flic();
S390FLICStateClass *fsc = s390_get_flic_class(fs);
/*
* Disallow multiple registrations for the same device type.
* Report an error if registering for an already registered type.
*/
if (channel_subsys.io_adapters[type][0]) {
error_setg(errp, "Adapters for type %d already registered", type);
}
for (isc = 0; isc <= MAX_ISC; isc++) {
id = (type << 3) | isc;
ret = fsc->register_io_adapter(fs, id, isc, swap, maskable, flags);
if (ret == 0) {
adapter = g_new0(IoAdapter, 1);
adapter->id = id;
adapter->isc = isc;
adapter->type = type;
adapter->flags = flags;
channel_subsys.io_adapters[type][isc] = adapter;
} else {
error_setg_errno(errp, -ret, "Unexpected error %d when "
"registering adapter %d", ret, id);
break;
}
}
/*
* No need to free registered adapters in kvm: kvm will clean up
* when the machine goes away.
*/
if (ret) {
for (isc--; isc >= 0; isc--) {
g_free(channel_subsys.io_adapters[type][isc]);
channel_subsys.io_adapters[type][isc] = NULL;
}
}
}
static void css_clear_io_interrupt(uint16_t subchannel_id,
uint16_t subchannel_nr)
{
Error *err = NULL;
static bool no_clear_irq;
S390FLICState *fs = s390_get_flic();
S390FLICStateClass *fsc = s390_get_flic_class(fs);
int r;
if (unlikely(no_clear_irq)) {
return;
}
r = fsc->clear_io_irq(fs, subchannel_id, subchannel_nr);
switch (r) {
case 0:
break;
case -ENOSYS:
no_clear_irq = true;
/*
* Ignore unavailability, as the user can't do anything
* about it anyway.
*/
break;
default:
error_setg_errno(&err, -r, "unexpected error condition");
error_propagate(&error_abort, err);
}
}
static inline uint16_t css_do_build_subchannel_id(uint8_t cssid, uint8_t ssid)
{
if (channel_subsys.max_cssid > 0) {
return (cssid << 8) | (1 << 3) | (ssid << 1) | 1;
}
return (ssid << 1) | 1;
}
uint16_t css_build_subchannel_id(SubchDev *sch)
{
return css_do_build_subchannel_id(sch->cssid, sch->ssid);
}
void css_inject_io_interrupt(SubchDev *sch)
{
uint8_t isc = (sch->curr_status.pmcw.flags & PMCW_FLAGS_MASK_ISC) >> 11;
trace_css_io_interrupt(sch->cssid, sch->ssid, sch->schid,
sch->curr_status.pmcw.intparm, isc, "");
s390_io_interrupt(css_build_subchannel_id(sch),
sch->schid,
sch->curr_status.pmcw.intparm,
isc << 27);
}
void css_conditional_io_interrupt(SubchDev *sch)
{
/*
* If the subchannel is not enabled, it is not made status pending
* (see PoP p. 16-17, "Status Control").
*/
if (!(sch->curr_status.pmcw.flags & PMCW_FLAGS_MASK_ENA)) {
return;
}
/*
* If the subchannel is not currently status pending, make it pending
* with alert status.
*/
if (!(sch->curr_status.scsw.ctrl & SCSW_STCTL_STATUS_PEND)) {
uint8_t isc = (sch->curr_status.pmcw.flags & PMCW_FLAGS_MASK_ISC) >> 11;
trace_css_io_interrupt(sch->cssid, sch->ssid, sch->schid,
sch->curr_status.pmcw.intparm, isc,
"(unsolicited)");
sch->curr_status.scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
sch->curr_status.scsw.ctrl |=
SCSW_STCTL_ALERT | SCSW_STCTL_STATUS_PEND;
/* Inject an I/O interrupt. */
s390_io_interrupt(css_build_subchannel_id(sch),
sch->schid,
sch->curr_status.pmcw.intparm,
isc << 27);
}
}
int css_do_sic(CPUS390XState *env, uint8_t isc, uint16_t mode)
{
S390FLICState *fs = s390_get_flic();
S390FLICStateClass *fsc = s390_get_flic_class(fs);
int r;
if (env->psw.mask & PSW_MASK_PSTATE) {
r = -PGM_PRIVILEGED;
goto out;
}
trace_css_do_sic(mode, isc);
switch (mode) {
case SIC_IRQ_MODE_ALL:
case SIC_IRQ_MODE_SINGLE:
break;
default:
r = -PGM_OPERAND;
goto out;
}
r = fsc->modify_ais_mode(fs, isc, mode) ? -PGM_OPERATION : 0;
out:
return r;
}
void css_adapter_interrupt(CssIoAdapterType type, uint8_t isc)
{
S390FLICState *fs = s390_get_flic();
S390FLICStateClass *fsc = s390_get_flic_class(fs);
uint32_t io_int_word = (isc << 27) | IO_INT_WORD_AI;
IoAdapter *adapter = channel_subsys.io_adapters[type][isc];
if (!adapter) {
return;
}
trace_css_adapter_interrupt(isc);
if (fs->ais_supported) {
if (fsc->inject_airq(fs, type, isc, adapter->flags)) {
error_report("Failed to inject airq with AIS supported");
exit(1);
}
} else {
s390_io_interrupt(0, 0, 0, io_int_word);
}
}
static void sch_handle_clear_func(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
int path;
/* Path management: In our simple css, we always choose the only path. */
path = 0x80;
/* Reset values prior to 'issuing the clear signal'. */
schib->pmcw.lpum = 0;
schib->pmcw.pom = 0xff;
schib->scsw.flags &= ~SCSW_FLAGS_MASK_PNO;
/* We always 'attempt to issue the clear signal', and we always succeed. */
sch->channel_prog = 0x0;
sch->last_cmd_valid = false;
schib->scsw.ctrl &= ~SCSW_ACTL_CLEAR_PEND;
schib->scsw.ctrl |= SCSW_STCTL_STATUS_PEND;
schib->scsw.dstat = 0;
schib->scsw.cstat = 0;
schib->pmcw.lpum = path;
}
static void sch_handle_halt_func(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
hwaddr curr_ccw = sch->channel_prog;
int path;
/* Path management: In our simple css, we always choose the only path. */
path = 0x80;
/* We always 'attempt to issue the halt signal', and we always succeed. */
sch->channel_prog = 0x0;
sch->last_cmd_valid = false;
schib->scsw.ctrl &= ~SCSW_ACTL_HALT_PEND;
schib->scsw.ctrl |= SCSW_STCTL_STATUS_PEND;
if ((schib->scsw.ctrl & (SCSW_ACTL_SUBCH_ACTIVE |
SCSW_ACTL_DEVICE_ACTIVE)) ||
!((schib->scsw.ctrl & SCSW_ACTL_START_PEND) ||
(schib->scsw.ctrl & SCSW_ACTL_SUSP))) {
schib->scsw.dstat = SCSW_DSTAT_DEVICE_END;
}
if ((schib->scsw.ctrl & (SCSW_ACTL_SUBCH_ACTIVE |
SCSW_ACTL_DEVICE_ACTIVE)) ||
(schib->scsw.ctrl & SCSW_ACTL_SUSP)) {
schib->scsw.cpa = curr_ccw + 8;
}
schib->scsw.cstat = 0;
schib->pmcw.lpum = path;
}
/*
* As the SenseId struct cannot be packed (would cause unaligned accesses), we
* have to copy the individual fields to an unstructured area using the correct
* layout (see SA22-7204-01 "Common I/O-Device Commands").
*/
static void copy_sense_id_to_guest(uint8_t *dest, SenseId *src)
{
int i;
dest[0] = src->reserved;
stw_be_p(dest + 1, src->cu_type);
dest[3] = src->cu_model;
stw_be_p(dest + 4, src->dev_type);
dest[6] = src->dev_model;
dest[7] = src->unused;
for (i = 0; i < ARRAY_SIZE(src->ciw); i++) {
dest[8 + i * 4] = src->ciw[i].type;
dest[9 + i * 4] = src->ciw[i].command;
stw_be_p(dest + 10 + i * 4, src->ciw[i].count);
}
}
static CCW1 copy_ccw_from_guest(hwaddr addr, bool fmt1)
{
CCW0 tmp0;
CCW1 tmp1;
CCW1 ret;
if (fmt1) {
cpu_physical_memory_read(addr, &tmp1, sizeof(tmp1));
ret.cmd_code = tmp1.cmd_code;
ret.flags = tmp1.flags;
ret.count = be16_to_cpu(tmp1.count);
ret.cda = be32_to_cpu(tmp1.cda);
} else {
cpu_physical_memory_read(addr, &tmp0, sizeof(tmp0));
if ((tmp0.cmd_code & 0x0f) == CCW_CMD_TIC) {
ret.cmd_code = CCW_CMD_TIC;
ret.flags = 0;
ret.count = 0;
} else {
ret.cmd_code = tmp0.cmd_code;
ret.flags = tmp0.flags;
ret.count = be16_to_cpu(tmp0.count);
}
ret.cda = be16_to_cpu(tmp0.cda1) | (tmp0.cda0 << 16);
}
return ret;
}
/**
* If out of bounds marks the stream broken. If broken returns -EINVAL,
* otherwise the requested length (may be zero)
*/
static inline int cds_check_len(CcwDataStream *cds, int len)
{
if (cds->at_byte + len > cds->count) {
cds->flags |= CDS_F_STREAM_BROKEN;
}
return cds->flags & CDS_F_STREAM_BROKEN ? -EINVAL : len;
}
static inline bool cds_ccw_addrs_ok(hwaddr addr, int len, bool ccw_fmt1)
{
return (addr + len) < (ccw_fmt1 ? (1UL << 31) : (1UL << 24));
}
static int ccw_dstream_rw_noflags(CcwDataStream *cds, void *buff, int len,
CcwDataStreamOp op)
{
int ret;
ret = cds_check_len(cds, len);
if (ret <= 0) {
return ret;
}
if (!cds_ccw_addrs_ok(cds->cda, len, cds->flags & CDS_F_FMT)) {
return -EINVAL; /* channel program check */
}
if (op == CDS_OP_A) {
goto incr;
}
if (!cds->do_skip) {
ret = address_space_rw(&address_space_memory, cds->cda,
MEMTXATTRS_UNSPECIFIED, buff, len, op);
} else {
ret = MEMTX_OK;
}
if (ret != MEMTX_OK) {
cds->flags |= CDS_F_STREAM_BROKEN;
return -EINVAL;
}
incr:
cds->at_byte += len;
cds->cda += len;
return 0;
}
/* returns values between 1 and bsz, where bsz is a power of 2 */
static inline uint16_t ida_continuous_left(hwaddr cda, uint64_t bsz)
{
return bsz - (cda & (bsz - 1));
}
static inline uint64_t ccw_ida_block_size(uint8_t flags)
{
if ((flags & CDS_F_C64) && !(flags & CDS_F_I2K)) {
return 1ULL << 12;
}
return 1ULL << 11;
}
static inline int ida_read_next_idaw(CcwDataStream *cds)
{
union {uint64_t fmt2; uint32_t fmt1; } idaw;
int ret;
hwaddr idaw_addr;
bool idaw_fmt2 = cds->flags & CDS_F_C64;
bool ccw_fmt1 = cds->flags & CDS_F_FMT;
if (idaw_fmt2) {
idaw_addr = cds->cda_orig + sizeof(idaw.fmt2) * cds->at_idaw;
if (idaw_addr & 0x07 || !cds_ccw_addrs_ok(idaw_addr, 0, ccw_fmt1)) {
return -EINVAL; /* channel program check */
}
Avoid address_space_rw() with a constant is_write argument The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-18 12:24:57 +01:00
ret = address_space_read(&address_space_memory, idaw_addr,
MEMTXATTRS_UNSPECIFIED, &idaw.fmt2,
sizeof(idaw.fmt2));
cds->cda = be64_to_cpu(idaw.fmt2);
} else {
idaw_addr = cds->cda_orig + sizeof(idaw.fmt1) * cds->at_idaw;
if (idaw_addr & 0x03 || !cds_ccw_addrs_ok(idaw_addr, 0, ccw_fmt1)) {
return -EINVAL; /* channel program check */
}
Avoid address_space_rw() with a constant is_write argument The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-18 12:24:57 +01:00
ret = address_space_read(&address_space_memory, idaw_addr,
MEMTXATTRS_UNSPECIFIED, &idaw.fmt1,
sizeof(idaw.fmt1));
cds->cda = be64_to_cpu(idaw.fmt1);
if (cds->cda & 0x80000000) {
return -EINVAL; /* channel program check */
}
}
++(cds->at_idaw);
if (ret != MEMTX_OK) {
/* assume inaccessible address */
return -EINVAL; /* channel program check */
}
return 0;
}
static int ccw_dstream_rw_ida(CcwDataStream *cds, void *buff, int len,
CcwDataStreamOp op)
{
uint64_t bsz = ccw_ida_block_size(cds->flags);
int ret = 0;
uint16_t cont_left, iter_len;
ret = cds_check_len(cds, len);
if (ret <= 0) {
return ret;
}
if (!cds->at_idaw) {
/* read first idaw */
ret = ida_read_next_idaw(cds);
if (ret) {
goto err;
}
cont_left = ida_continuous_left(cds->cda, bsz);
} else {
cont_left = ida_continuous_left(cds->cda, bsz);
if (cont_left == bsz) {
ret = ida_read_next_idaw(cds);
if (ret) {
goto err;
}
if (cds->cda & (bsz - 1)) {
ret = -EINVAL; /* channel program check */
goto err;
}
}
}
do {
iter_len = MIN(len, cont_left);
if (op != CDS_OP_A) {
if (!cds->do_skip) {
ret = address_space_rw(&address_space_memory, cds->cda,
MEMTXATTRS_UNSPECIFIED, buff, iter_len,
op);
} else {
ret = MEMTX_OK;
}
if (ret != MEMTX_OK) {
/* assume inaccessible address */
ret = -EINVAL; /* channel program check */
goto err;
}
}
cds->at_byte += iter_len;
cds->cda += iter_len;
len -= iter_len;
if (!len) {
break;
}
ret = ida_read_next_idaw(cds);
if (ret) {
goto err;
}
cont_left = bsz;
} while (true);
return ret;
err:
cds->flags |= CDS_F_STREAM_BROKEN;
return ret;
}
void ccw_dstream_init(CcwDataStream *cds, CCW1 const *ccw, ORB const *orb)
{
/*
* We don't support MIDA (an optional facility) yet and we
* catch this earlier. Just for expressing the precondition.
*/
g_assert(!(orb->ctrl1 & ORB_CTRL1_MASK_MIDAW));
cds->flags = (orb->ctrl0 & ORB_CTRL0_MASK_I2K ? CDS_F_I2K : 0) |
(orb->ctrl0 & ORB_CTRL0_MASK_C64 ? CDS_F_C64 : 0) |
(orb->ctrl0 & ORB_CTRL0_MASK_FMT ? CDS_F_FMT : 0) |
(ccw->flags & CCW_FLAG_IDA ? CDS_F_IDA : 0);
cds->count = ccw->count;
cds->cda_orig = ccw->cda;
/* skip is only effective for read, read backwards, or sense commands */
cds->do_skip = (ccw->flags & CCW_FLAG_SKIP) &&
((ccw->cmd_code & 0x0f) == CCW_CMD_BASIC_SENSE ||
(ccw->cmd_code & 0x03) == 0x02 /* read */ ||
(ccw->cmd_code & 0x0f) == 0x0c /* read backwards */);
ccw_dstream_rewind(cds);
if (!(cds->flags & CDS_F_IDA)) {
cds->op_handler = ccw_dstream_rw_noflags;
} else {
cds->op_handler = ccw_dstream_rw_ida;
}
}
static int css_interpret_ccw(SubchDev *sch, hwaddr ccw_addr,
bool suspend_allowed)
{
int ret;
bool check_len;
int len;
CCW1 ccw;
if (!ccw_addr) {
return -EINVAL; /* channel-program check */
}
2017-07-27 17:48:42 +02:00
/* Check doubleword aligned and 31 or 24 (fmt 0) bit addressable. */
if (ccw_addr & (sch->ccw_fmt_1 ? 0x80000007 : 0xff000007)) {
return -EINVAL;
}
/* Translate everything to format-1 ccws - the information is the same. */
ccw = copy_ccw_from_guest(ccw_addr, sch->ccw_fmt_1);
/* Check for invalid command codes. */
if ((ccw.cmd_code & 0x0f) == 0) {
return -EINVAL;
}
if (((ccw.cmd_code & 0x0f) == CCW_CMD_TIC) &&
((ccw.cmd_code & 0xf0) != 0)) {
return -EINVAL;
}
if (!sch->ccw_fmt_1 && (ccw.count == 0) &&
(ccw.cmd_code != CCW_CMD_TIC)) {
return -EINVAL;
}
/* We don't support MIDA. */
if (ccw.flags & CCW_FLAG_MIDA) {
return -EINVAL;
}
if (ccw.flags & CCW_FLAG_SUSPEND) {
return suspend_allowed ? -EINPROGRESS : -EINVAL;
}
check_len = !((ccw.flags & CCW_FLAG_SLI) && !(ccw.flags & CCW_FLAG_DC));
if (!ccw.cda) {
if (sch->ccw_no_data_cnt == 255) {
return -EINVAL;
}
sch->ccw_no_data_cnt++;
}
/* Look at the command. */
ccw_dstream_init(&sch->cds, &ccw, &(sch->orb));
switch (ccw.cmd_code) {
case CCW_CMD_NOOP:
/* Nothing to do. */
ret = 0;
break;
case CCW_CMD_BASIC_SENSE:
if (check_len) {
if (ccw.count != sizeof(sch->sense_data)) {
ret = -EINVAL;
break;
}
}
len = MIN(ccw.count, sizeof(sch->sense_data));
ccw_dstream_write_buf(&sch->cds, sch->sense_data, len);
sch->curr_status.scsw.count = ccw_dstream_residual_count(&sch->cds);
memset(sch->sense_data, 0, sizeof(sch->sense_data));
ret = 0;
break;
case CCW_CMD_SENSE_ID:
{
/* According to SA22-7204-01, Sense-ID can store up to 256 bytes */
uint8_t sense_id[256];
copy_sense_id_to_guest(sense_id, &sch->id);
/* Sense ID information is device specific. */
if (check_len) {
if (ccw.count != sizeof(sense_id)) {
ret = -EINVAL;
break;
}
}
len = MIN(ccw.count, sizeof(sense_id));
/*
* Only indicate 0xff in the first sense byte if we actually
* have enough place to store at least bytes 0-3.
*/
if (len >= 4) {
sense_id[0] = 0xff;
} else {
sense_id[0] = 0;
}
ccw_dstream_write_buf(&sch->cds, sense_id, len);
sch->curr_status.scsw.count = ccw_dstream_residual_count(&sch->cds);
ret = 0;
break;
}
case CCW_CMD_TIC:
if (sch->last_cmd_valid && (sch->last_cmd.cmd_code == CCW_CMD_TIC)) {
ret = -EINVAL;
break;
}
if (ccw.flags || ccw.count) {
/* We have already sanitized these if converted from fmt 0. */
ret = -EINVAL;
break;
}
sch->channel_prog = ccw.cda;
ret = -EAGAIN;
break;
default:
if (sch->ccw_cb) {
/* Handle device specific commands. */
ret = sch->ccw_cb(sch, ccw);
} else {
ret = -ENOSYS;
}
break;
}
sch->last_cmd = ccw;
sch->last_cmd_valid = true;
if (ret == 0) {
if (ccw.flags & CCW_FLAG_CC) {
sch->channel_prog += 8;
ret = -EAGAIN;
}
}
return ret;
}
static void sch_handle_start_func_virtual(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
int path;
int ret;
bool suspend_allowed;
/* Path management: In our simple css, we always choose the only path. */
path = 0x80;
if (!(schib->scsw.ctrl & SCSW_ACTL_SUSP)) {
/* Start Function triggered via ssch, i.e. we have an ORB */
ORB *orb = &sch->orb;
schib->scsw.cstat = 0;
schib->scsw.dstat = 0;
/* Look at the orb and try to execute the channel program. */
schib->pmcw.intparm = orb->intparm;
if (!(orb->lpm & path)) {
/* Generate a deferred cc 3 condition. */
schib->scsw.flags |= SCSW_FLAGS_MASK_CC;
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
schib->scsw.ctrl |= (SCSW_STCTL_ALERT | SCSW_STCTL_STATUS_PEND);
return;
}
sch->ccw_fmt_1 = !!(orb->ctrl0 & ORB_CTRL0_MASK_FMT);
schib->scsw.flags |= (sch->ccw_fmt_1) ? SCSW_FLAGS_MASK_FMT : 0;
sch->ccw_no_data_cnt = 0;
suspend_allowed = !!(orb->ctrl0 & ORB_CTRL0_MASK_SPND);
} else {
/* Start Function resumed via rsch */
schib->scsw.ctrl &= ~(SCSW_ACTL_SUSP | SCSW_ACTL_RESUME_PEND);
/* The channel program had been suspended before. */
suspend_allowed = true;
}
sch->last_cmd_valid = false;
do {
ret = css_interpret_ccw(sch, sch->channel_prog, suspend_allowed);
switch (ret) {
case -EAGAIN:
/* ccw chain, continue processing */
break;
case 0:
/* success */
schib->scsw.ctrl &= ~SCSW_ACTL_START_PEND;
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
schib->scsw.ctrl |= SCSW_STCTL_PRIMARY | SCSW_STCTL_SECONDARY |
SCSW_STCTL_STATUS_PEND;
schib->scsw.dstat = SCSW_DSTAT_CHANNEL_END | SCSW_DSTAT_DEVICE_END;
schib->scsw.cpa = sch->channel_prog + 8;
break;
case -EIO:
/* I/O errors, status depends on specific devices */
break;
case -ENOSYS:
/* unsupported command, generate unit check (command reject) */
schib->scsw.ctrl &= ~SCSW_ACTL_START_PEND;
schib->scsw.dstat = SCSW_DSTAT_UNIT_CHECK;
/* Set sense bit 0 in ecw0. */
sch->sense_data[0] = 0x80;
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
schib->scsw.ctrl |= SCSW_STCTL_PRIMARY | SCSW_STCTL_SECONDARY |
SCSW_STCTL_ALERT | SCSW_STCTL_STATUS_PEND;
schib->scsw.cpa = sch->channel_prog + 8;
break;
case -EINPROGRESS:
/* channel program has been suspended */
schib->scsw.ctrl &= ~SCSW_ACTL_START_PEND;
schib->scsw.ctrl |= SCSW_ACTL_SUSP;
break;
default:
/* error, generate channel program check */
schib->scsw.ctrl &= ~SCSW_ACTL_START_PEND;
schib->scsw.cstat = SCSW_CSTAT_PROG_CHECK;
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
schib->scsw.ctrl |= SCSW_STCTL_PRIMARY | SCSW_STCTL_SECONDARY |
SCSW_STCTL_ALERT | SCSW_STCTL_STATUS_PEND;
schib->scsw.cpa = sch->channel_prog + 8;
break;
}
} while (ret == -EAGAIN);
}
static void sch_handle_halt_func_passthrough(SubchDev *sch)
{
int ret;
ret = s390_ccw_halt(sch);
if (ret == -ENOSYS) {
sch_handle_halt_func(sch);
}
}
static void sch_handle_clear_func_passthrough(SubchDev *sch)
{
int ret;
ret = s390_ccw_clear(sch);
if (ret == -ENOSYS) {
sch_handle_clear_func(sch);
}
}
static IOInstEnding sch_handle_start_func_passthrough(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
ORB *orb = &sch->orb;
if (!(schib->scsw.ctrl & SCSW_ACTL_SUSP)) {
assert(orb != NULL);
schib->pmcw.intparm = orb->intparm;
}
return s390_ccw_cmd_request(sch);
}
/*
* On real machines, this would run asynchronously to the main vcpus.
* We might want to make some parts of the ssch handling (interpreting
* read/writes) asynchronous later on if we start supporting more than
* our current very simple devices.
*/
IOInstEnding do_subchannel_work_virtual(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (schib->scsw.ctrl & SCSW_FCTL_CLEAR_FUNC) {
sch_handle_clear_func(sch);
} else if (schib->scsw.ctrl & SCSW_FCTL_HALT_FUNC) {
sch_handle_halt_func(sch);
} else if (schib->scsw.ctrl & SCSW_FCTL_START_FUNC) {
/* Triggered by both ssch and rsch. */
sch_handle_start_func_virtual(sch);
}
css_inject_io_interrupt(sch);
/* inst must succeed if this func is called */
return IOINST_CC_EXPECTED;
}
IOInstEnding do_subchannel_work_passthrough(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (schib->scsw.ctrl & SCSW_FCTL_CLEAR_FUNC) {
sch_handle_clear_func_passthrough(sch);
} else if (schib->scsw.ctrl & SCSW_FCTL_HALT_FUNC) {
sch_handle_halt_func_passthrough(sch);
} else if (schib->scsw.ctrl & SCSW_FCTL_START_FUNC) {
return sch_handle_start_func_passthrough(sch);
}
return IOINST_CC_EXPECTED;
}
static IOInstEnding do_subchannel_work(SubchDev *sch)
{
if (!sch->do_subchannel_work) {
return IOINST_CC_STATUS_PRESENT;
}
g_assert(sch->curr_status.scsw.ctrl & SCSW_CTRL_MASK_FCTL);
return sch->do_subchannel_work(sch);
}
static void copy_pmcw_to_guest(PMCW *dest, const PMCW *src)
{
int i;
dest->intparm = cpu_to_be32(src->intparm);
dest->flags = cpu_to_be16(src->flags);
dest->devno = cpu_to_be16(src->devno);
dest->lpm = src->lpm;
dest->pnom = src->pnom;
dest->lpum = src->lpum;
dest->pim = src->pim;
dest->mbi = cpu_to_be16(src->mbi);
dest->pom = src->pom;
dest->pam = src->pam;
for (i = 0; i < ARRAY_SIZE(dest->chpid); i++) {
dest->chpid[i] = src->chpid[i];
}
dest->chars = cpu_to_be32(src->chars);
}
void copy_scsw_to_guest(SCSW *dest, const SCSW *src)
{
dest->flags = cpu_to_be16(src->flags);
dest->ctrl = cpu_to_be16(src->ctrl);
dest->cpa = cpu_to_be32(src->cpa);
dest->dstat = src->dstat;
dest->cstat = src->cstat;
dest->count = cpu_to_be16(src->count);
}
static void copy_schib_to_guest(SCHIB *dest, const SCHIB *src)
{
int i;
/*
* We copy the PMCW and SCSW in and out of local variables to
* avoid taking the address of members of a packed struct.
*/
PMCW src_pmcw, dest_pmcw;
SCSW src_scsw, dest_scsw;
src_pmcw = src->pmcw;
copy_pmcw_to_guest(&dest_pmcw, &src_pmcw);
dest->pmcw = dest_pmcw;
src_scsw = src->scsw;
copy_scsw_to_guest(&dest_scsw, &src_scsw);
dest->scsw = dest_scsw;
dest->mba = cpu_to_be64(src->mba);
for (i = 0; i < ARRAY_SIZE(dest->mda); i++) {
dest->mda[i] = src->mda[i];
}
}
IOInstEnding css_do_stsch(SubchDev *sch, SCHIB *schib)
{
int ret;
/*
* For some subchannels, we may want to update parts of
* the schib (e.g., update path masks from the host device
* for passthrough subchannels).
*/
ret = s390_ccw_store(sch);
/* Use current status. */
copy_schib_to_guest(schib, &sch->curr_status);
return ret;
}
static void copy_pmcw_from_guest(PMCW *dest, const PMCW *src)
{
int i;
dest->intparm = be32_to_cpu(src->intparm);
dest->flags = be16_to_cpu(src->flags);
dest->devno = be16_to_cpu(src->devno);
dest->lpm = src->lpm;
dest->pnom = src->pnom;
dest->lpum = src->lpum;
dest->pim = src->pim;
dest->mbi = be16_to_cpu(src->mbi);
dest->pom = src->pom;
dest->pam = src->pam;
for (i = 0; i < ARRAY_SIZE(dest->chpid); i++) {
dest->chpid[i] = src->chpid[i];
}
dest->chars = be32_to_cpu(src->chars);
}
static void copy_scsw_from_guest(SCSW *dest, const SCSW *src)
{
dest->flags = be16_to_cpu(src->flags);
dest->ctrl = be16_to_cpu(src->ctrl);
dest->cpa = be32_to_cpu(src->cpa);
dest->dstat = src->dstat;
dest->cstat = src->cstat;
dest->count = be16_to_cpu(src->count);
}
static void copy_schib_from_guest(SCHIB *dest, const SCHIB *src)
{
int i;
/*
* We copy the PMCW and SCSW in and out of local variables to
* avoid taking the address of members of a packed struct.
*/
PMCW src_pmcw, dest_pmcw;
SCSW src_scsw, dest_scsw;
src_pmcw = src->pmcw;
copy_pmcw_from_guest(&dest_pmcw, &src_pmcw);
dest->pmcw = dest_pmcw;
src_scsw = src->scsw;
copy_scsw_from_guest(&dest_scsw, &src_scsw);
dest->scsw = dest_scsw;
dest->mba = be64_to_cpu(src->mba);
for (i = 0; i < ARRAY_SIZE(dest->mda); i++) {
dest->mda[i] = src->mda[i];
}
}
IOInstEnding css_do_msch(SubchDev *sch, const SCHIB *orig_schib)
{
SCHIB *schib = &sch->curr_status;
uint16_t oldflags;
SCHIB schib_copy;
if (!(schib->pmcw.flags & PMCW_FLAGS_MASK_DNV)) {
return IOINST_CC_EXPECTED;
}
if (schib->scsw.ctrl & SCSW_STCTL_STATUS_PEND) {
return IOINST_CC_STATUS_PRESENT;
}
if (schib->scsw.ctrl &
(SCSW_FCTL_START_FUNC|SCSW_FCTL_HALT_FUNC|SCSW_FCTL_CLEAR_FUNC)) {
return IOINST_CC_BUSY;
}
copy_schib_from_guest(&schib_copy, orig_schib);
/* Only update the program-modifiable fields. */
schib->pmcw.intparm = schib_copy.pmcw.intparm;
oldflags = schib->pmcw.flags;
schib->pmcw.flags &= ~(PMCW_FLAGS_MASK_ISC | PMCW_FLAGS_MASK_ENA |
PMCW_FLAGS_MASK_LM | PMCW_FLAGS_MASK_MME |
PMCW_FLAGS_MASK_MP);
schib->pmcw.flags |= schib_copy.pmcw.flags &
(PMCW_FLAGS_MASK_ISC | PMCW_FLAGS_MASK_ENA |
PMCW_FLAGS_MASK_LM | PMCW_FLAGS_MASK_MME |
PMCW_FLAGS_MASK_MP);
schib->pmcw.lpm = schib_copy.pmcw.lpm;
schib->pmcw.mbi = schib_copy.pmcw.mbi;
schib->pmcw.pom = schib_copy.pmcw.pom;
schib->pmcw.chars &= ~(PMCW_CHARS_MASK_MBFC | PMCW_CHARS_MASK_CSENSE);
schib->pmcw.chars |= schib_copy.pmcw.chars &
(PMCW_CHARS_MASK_MBFC | PMCW_CHARS_MASK_CSENSE);
schib->mba = schib_copy.mba;
/* Has the channel been disabled? */
if (sch->disable_cb && (oldflags & PMCW_FLAGS_MASK_ENA) != 0
&& (schib->pmcw.flags & PMCW_FLAGS_MASK_ENA) == 0) {
sch->disable_cb(sch);
}
return IOINST_CC_EXPECTED;
}
IOInstEnding css_do_xsch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return IOINST_CC_NOT_OPERATIONAL;
}
if (schib->scsw.ctrl & SCSW_CTRL_MASK_STCTL) {
return IOINST_CC_STATUS_PRESENT;
}
if (!(schib->scsw.ctrl & SCSW_CTRL_MASK_FCTL) ||
((schib->scsw.ctrl & SCSW_CTRL_MASK_FCTL) != SCSW_FCTL_START_FUNC) ||
(!(schib->scsw.ctrl &
(SCSW_ACTL_RESUME_PEND | SCSW_ACTL_START_PEND | SCSW_ACTL_SUSP))) ||
(schib->scsw.ctrl & SCSW_ACTL_SUBCH_ACTIVE)) {
return IOINST_CC_BUSY;
}
/* Cancel the current operation. */
schib->scsw.ctrl &= ~(SCSW_FCTL_START_FUNC |
SCSW_ACTL_RESUME_PEND |
SCSW_ACTL_START_PEND |
SCSW_ACTL_SUSP);
sch->channel_prog = 0x0;
sch->last_cmd_valid = false;
schib->scsw.dstat = 0;
schib->scsw.cstat = 0;
return IOINST_CC_EXPECTED;
}
IOInstEnding css_do_csch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return IOINST_CC_NOT_OPERATIONAL;
}
/* Trigger the clear function. */
schib->scsw.ctrl &= ~(SCSW_CTRL_MASK_FCTL | SCSW_CTRL_MASK_ACTL);
schib->scsw.ctrl |= SCSW_FCTL_CLEAR_FUNC | SCSW_ACTL_CLEAR_PEND;
return do_subchannel_work(sch);
}
IOInstEnding css_do_hsch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return IOINST_CC_NOT_OPERATIONAL;
}
if (((schib->scsw.ctrl & SCSW_CTRL_MASK_STCTL) == SCSW_STCTL_STATUS_PEND) ||
(schib->scsw.ctrl & (SCSW_STCTL_PRIMARY |
SCSW_STCTL_SECONDARY |
SCSW_STCTL_ALERT))) {
return IOINST_CC_STATUS_PRESENT;
}
if (schib->scsw.ctrl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) {
return IOINST_CC_BUSY;
}
/* Trigger the halt function. */
schib->scsw.ctrl |= SCSW_FCTL_HALT_FUNC;
schib->scsw.ctrl &= ~SCSW_FCTL_START_FUNC;
if (((schib->scsw.ctrl & SCSW_CTRL_MASK_ACTL) ==
(SCSW_ACTL_SUBCH_ACTIVE | SCSW_ACTL_DEVICE_ACTIVE)) &&
((schib->scsw.ctrl & SCSW_CTRL_MASK_STCTL) ==
SCSW_STCTL_INTERMEDIATE)) {
schib->scsw.ctrl &= ~SCSW_STCTL_STATUS_PEND;
}
schib->scsw.ctrl |= SCSW_ACTL_HALT_PEND;
return do_subchannel_work(sch);
}
static void css_update_chnmon(SubchDev *sch)
{
if (!(sch->curr_status.pmcw.flags & PMCW_FLAGS_MASK_MME)) {
/* Not active. */
return;
}
/* The counter is conveniently located at the beginning of the struct. */
if (sch->curr_status.pmcw.chars & PMCW_CHARS_MASK_MBFC) {
/* Format 1, per-subchannel area. */
uint32_t count;
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
count = address_space_ldl(&address_space_memory,
sch->curr_status.mba,
MEMTXATTRS_UNSPECIFIED,
NULL);
count++;
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
address_space_stl(&address_space_memory, sch->curr_status.mba, count,
MEMTXATTRS_UNSPECIFIED, NULL);
} else {
/* Format 0, global area. */
uint32_t offset;
uint16_t count;
offset = sch->curr_status.pmcw.mbi << 5;
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
count = address_space_lduw(&address_space_memory,
channel_subsys.chnmon_area + offset,
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
MEMTXATTRS_UNSPECIFIED,
NULL);
count++;
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
address_space_stw(&address_space_memory,
channel_subsys.chnmon_area + offset, count,
Switch non-CPU callers from ld/st*_phys to address_space_ld/st* Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 17:49:24 +02:00
MEMTXATTRS_UNSPECIFIED, NULL);
}
}
IOInstEnding css_do_ssch(SubchDev *sch, ORB *orb)
{
SCHIB *schib = &sch->curr_status;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return IOINST_CC_NOT_OPERATIONAL;
}
if (schib->scsw.ctrl & SCSW_STCTL_STATUS_PEND) {
return IOINST_CC_STATUS_PRESENT;
}
if (schib->scsw.ctrl & (SCSW_FCTL_START_FUNC |
SCSW_FCTL_HALT_FUNC |
SCSW_FCTL_CLEAR_FUNC)) {
return IOINST_CC_BUSY;
}
/* If monitoring is active, update counter. */
if (channel_subsys.chnmon_active) {
css_update_chnmon(sch);
}
sch->orb = *orb;
sch->channel_prog = orb->cpa;
/* Trigger the start function. */
schib->scsw.ctrl |= (SCSW_FCTL_START_FUNC | SCSW_ACTL_START_PEND);
schib->scsw.flags &= ~SCSW_FLAGS_MASK_PNO;
return do_subchannel_work(sch);
}
static void copy_irb_to_guest(IRB *dest, const IRB *src, const PMCW *pmcw,
int *irb_len)
{
int i;
uint16_t stctl = src->scsw.ctrl & SCSW_CTRL_MASK_STCTL;
uint16_t actl = src->scsw.ctrl & SCSW_CTRL_MASK_ACTL;
copy_scsw_to_guest(&dest->scsw, &src->scsw);
for (i = 0; i < ARRAY_SIZE(dest->esw); i++) {
dest->esw[i] = cpu_to_be32(src->esw[i]);
}
for (i = 0; i < ARRAY_SIZE(dest->ecw); i++) {
dest->ecw[i] = cpu_to_be32(src->ecw[i]);
}
*irb_len = sizeof(*dest) - sizeof(dest->emw);
/* extended measurements enabled? */
if ((src->scsw.flags & SCSW_FLAGS_MASK_ESWF) ||
!(pmcw->flags & PMCW_FLAGS_MASK_TF) ||
!(pmcw->chars & PMCW_CHARS_MASK_XMWME)) {
return;
}
/* extended measurements pending? */
if (!(stctl & SCSW_STCTL_STATUS_PEND)) {
return;
}
if ((stctl & SCSW_STCTL_PRIMARY) ||
(stctl == SCSW_STCTL_SECONDARY) ||
((stctl & SCSW_STCTL_INTERMEDIATE) && (actl & SCSW_ACTL_SUSP))) {
for (i = 0; i < ARRAY_SIZE(dest->emw); i++) {
dest->emw[i] = cpu_to_be32(src->emw[i]);
}
}
*irb_len = sizeof(*dest);
}
int css_do_tsch_get_irb(SubchDev *sch, IRB *target_irb, int *irb_len)
{
SCHIB *schib = &sch->curr_status;
PMCW p;
uint16_t stctl;
IRB irb;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return 3;
}
stctl = schib->scsw.ctrl & SCSW_CTRL_MASK_STCTL;
/* Prepare the irb for the guest. */
memset(&irb, 0, sizeof(IRB));
/* Copy scsw from current status. */
irb.scsw = schib->scsw;
if (stctl & SCSW_STCTL_STATUS_PEND) {
if (schib->scsw.cstat & (SCSW_CSTAT_DATA_CHECK |
SCSW_CSTAT_CHN_CTRL_CHK |
SCSW_CSTAT_INTF_CTRL_CHK)) {
irb.scsw.flags |= SCSW_FLAGS_MASK_ESWF;
irb.esw[0] = 0x04804000;
} else {
irb.esw[0] = 0x00800000;
}
/* If a unit check is pending, copy sense data. */
if ((schib->scsw.dstat & SCSW_DSTAT_UNIT_CHECK) &&
(schib->pmcw.chars & PMCW_CHARS_MASK_CSENSE)) {
int i;
irb.scsw.flags |= SCSW_FLAGS_MASK_ESWF | SCSW_FLAGS_MASK_ECTL;
/* Attention: sense_data is already BE! */
memcpy(irb.ecw, sch->sense_data, sizeof(sch->sense_data));
for (i = 0; i < ARRAY_SIZE(irb.ecw); i++) {
irb.ecw[i] = be32_to_cpu(irb.ecw[i]);
}
irb.esw[1] = 0x01000000 | (sizeof(sch->sense_data) << 8);
}
}
/* Store the irb to the guest. */
p = schib->pmcw;
copy_irb_to_guest(target_irb, &irb, &p, irb_len);
return ((stctl & SCSW_STCTL_STATUS_PEND) == 0);
}
void css_do_tsch_update_subch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
uint16_t stctl;
uint16_t fctl;
uint16_t actl;
stctl = schib->scsw.ctrl & SCSW_CTRL_MASK_STCTL;
fctl = schib->scsw.ctrl & SCSW_CTRL_MASK_FCTL;
actl = schib->scsw.ctrl & SCSW_CTRL_MASK_ACTL;
/* Clear conditions on subchannel, if applicable. */
if (stctl & SCSW_STCTL_STATUS_PEND) {
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_STCTL;
if ((stctl != (SCSW_STCTL_INTERMEDIATE | SCSW_STCTL_STATUS_PEND)) ||
((fctl & SCSW_FCTL_HALT_FUNC) &&
(actl & SCSW_ACTL_SUSP))) {
schib->scsw.ctrl &= ~SCSW_CTRL_MASK_FCTL;
}
if (stctl != (SCSW_STCTL_INTERMEDIATE | SCSW_STCTL_STATUS_PEND)) {
schib->scsw.flags &= ~SCSW_FLAGS_MASK_PNO;
schib->scsw.ctrl &= ~(SCSW_ACTL_RESUME_PEND |
SCSW_ACTL_START_PEND |
SCSW_ACTL_HALT_PEND |
SCSW_ACTL_CLEAR_PEND |
SCSW_ACTL_SUSP);
} else {
if ((actl & SCSW_ACTL_SUSP) &&
(fctl & SCSW_FCTL_START_FUNC)) {
schib->scsw.flags &= ~SCSW_FLAGS_MASK_PNO;
if (fctl & SCSW_FCTL_HALT_FUNC) {
schib->scsw.ctrl &= ~(SCSW_ACTL_RESUME_PEND |
SCSW_ACTL_START_PEND |
SCSW_ACTL_HALT_PEND |
SCSW_ACTL_CLEAR_PEND |
SCSW_ACTL_SUSP);
} else {
schib->scsw.ctrl &= ~SCSW_ACTL_RESUME_PEND;
}
}
}
/* Clear pending sense data. */
if (schib->pmcw.chars & PMCW_CHARS_MASK_CSENSE) {
memset(sch->sense_data, 0 , sizeof(sch->sense_data));
}
}
}
static void copy_crw_to_guest(CRW *dest, const CRW *src)
{
dest->flags = cpu_to_be16(src->flags);
dest->rsid = cpu_to_be16(src->rsid);
}
int css_do_stcrw(CRW *crw)
{
CrwContainer *crw_cont;
int ret;
crw_cont = QTAILQ_FIRST(&channel_subsys.pending_crws);
if (crw_cont) {
QTAILQ_REMOVE(&channel_subsys.pending_crws, crw_cont, sibling);
copy_crw_to_guest(crw, &crw_cont->crw);
g_free(crw_cont);
ret = 0;
} else {
/* List was empty, turn crw machine checks on again. */
memset(crw, 0, sizeof(*crw));
channel_subsys.do_crw_mchk = true;
ret = 1;
}
return ret;
}
static void copy_crw_from_guest(CRW *dest, const CRW *src)
{
dest->flags = be16_to_cpu(src->flags);
dest->rsid = be16_to_cpu(src->rsid);
}
void css_undo_stcrw(CRW *crw)
{
CrwContainer *crw_cont;
crw_cont = g_try_new0(CrwContainer, 1);
if (!crw_cont) {
channel_subsys.crws_lost = true;
return;
}
copy_crw_from_guest(&crw_cont->crw, crw);
QTAILQ_INSERT_HEAD(&channel_subsys.pending_crws, crw_cont, sibling);
}
int css_collect_chp_desc(int m, uint8_t cssid, uint8_t f_chpid, uint8_t l_chpid,
int rfmt, void *buf)
{
int i, desc_size;
uint32_t words[8];
uint32_t chpid_type_word;
CssImage *css;
if (!m && !cssid) {
css = channel_subsys.css[channel_subsys.default_cssid];
} else {
css = channel_subsys.css[cssid];
}
if (!css) {
return 0;
}
desc_size = 0;
for (i = f_chpid; i <= l_chpid; i++) {
if (css->chpids[i].in_use) {
chpid_type_word = 0x80000000 | (css->chpids[i].type << 8) | i;
if (rfmt == 0) {
words[0] = cpu_to_be32(chpid_type_word);
words[1] = 0;
memcpy(buf + desc_size, words, 8);
desc_size += 8;
} else if (rfmt == 1) {
words[0] = cpu_to_be32(chpid_type_word);
words[1] = 0;
words[2] = 0;
words[3] = 0;
words[4] = 0;
words[5] = 0;
words[6] = 0;
words[7] = 0;
memcpy(buf + desc_size, words, 32);
desc_size += 32;
}
}
}
return desc_size;
}
void css_do_schm(uint8_t mbk, int update, int dct, uint64_t mbo)
{
/* dct is currently ignored (not really meaningful for our devices) */
/* TODO: Don't ignore mbk. */
if (update && !channel_subsys.chnmon_active) {
/* Enable measuring. */
channel_subsys.chnmon_area = mbo;
channel_subsys.chnmon_active = true;
}
if (!update && channel_subsys.chnmon_active) {
/* Disable measuring. */
channel_subsys.chnmon_area = 0;
channel_subsys.chnmon_active = false;
}
}
IOInstEnding css_do_rsch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if (~(schib->pmcw.flags) & (PMCW_FLAGS_MASK_DNV | PMCW_FLAGS_MASK_ENA)) {
return IOINST_CC_NOT_OPERATIONAL;
}
if (schib->scsw.ctrl & SCSW_STCTL_STATUS_PEND) {
return IOINST_CC_STATUS_PRESENT;
}
if (((schib->scsw.ctrl & SCSW_CTRL_MASK_FCTL) != SCSW_FCTL_START_FUNC) ||
(schib->scsw.ctrl & SCSW_ACTL_RESUME_PEND) ||
(!(schib->scsw.ctrl & SCSW_ACTL_SUSP))) {
return IOINST_CC_BUSY;
}
/* If monitoring is active, update counter. */
if (channel_subsys.chnmon_active) {
css_update_chnmon(sch);
}
schib->scsw.ctrl |= SCSW_ACTL_RESUME_PEND;
return do_subchannel_work(sch);
}
int css_do_rchp(uint8_t cssid, uint8_t chpid)
{
uint8_t real_cssid;
if (cssid > channel_subsys.max_cssid) {
return -EINVAL;
}
if (channel_subsys.max_cssid == 0) {
real_cssid = channel_subsys.default_cssid;
} else {
real_cssid = cssid;
}
if (!channel_subsys.css[real_cssid]) {
return -EINVAL;
}
if (!channel_subsys.css[real_cssid]->chpids[chpid].in_use) {
return -ENODEV;
}
if (!channel_subsys.css[real_cssid]->chpids[chpid].is_virtual) {
fprintf(stderr,
"rchp unsupported for non-virtual chpid %x.%02x!\n",
real_cssid, chpid);
return -ENODEV;
}
/* We don't really use a channel path, so we're done here. */
css_queue_crw(CRW_RSC_CHP, CRW_ERC_INIT, 1,
channel_subsys.max_cssid > 0 ? 1 : 0, chpid);
if (channel_subsys.max_cssid > 0) {
css_queue_crw(CRW_RSC_CHP, CRW_ERC_INIT, 1, 0, real_cssid << 8);
}
return 0;
}
bool css_schid_final(int m, uint8_t cssid, uint8_t ssid, uint16_t schid)
{
SubchSet *set;
uint8_t real_cssid;
real_cssid = (!m && (cssid == 0)) ? channel_subsys.default_cssid : cssid;
if (ssid > MAX_SSID ||
!channel_subsys.css[real_cssid] ||
!channel_subsys.css[real_cssid]->sch_set[ssid]) {
return true;
}
set = channel_subsys.css[real_cssid]->sch_set[ssid];
return schid > find_last_bit(set->schids_used,
(MAX_SCHID + 1) / sizeof(unsigned long));
}
unsigned int css_find_free_chpid(uint8_t cssid)
{
CssImage *css = channel_subsys.css[cssid];
unsigned int chpid;
if (!css) {
return MAX_CHPID + 1;
}
for (chpid = 0; chpid <= MAX_CHPID; chpid++) {
/* skip reserved chpid */
if (chpid == VIRTIO_CCW_CHPID) {
continue;
}
if (!css->chpids[chpid].in_use) {
return chpid;
}
}
return MAX_CHPID + 1;
}
static int css_add_chpid(uint8_t cssid, uint8_t chpid, uint8_t type,
bool is_virt)
{
CssImage *css;
trace_css_chpid_add(cssid, chpid, type);
css = channel_subsys.css[cssid];
if (!css) {
return -EINVAL;
}
if (css->chpids[chpid].in_use) {
return -EEXIST;
}
css->chpids[chpid].in_use = 1;
css->chpids[chpid].type = type;
css->chpids[chpid].is_virtual = is_virt;
css_generate_chp_crws(cssid, chpid);
return 0;
}
void css_sch_build_virtual_schib(SubchDev *sch, uint8_t chpid, uint8_t type)
{
SCHIB *schib = &sch->curr_status;
int i;
CssImage *css = channel_subsys.css[sch->cssid];
assert(css != NULL);
memset(&schib->pmcw, 0, sizeof(PMCW));
schib->pmcw.flags |= PMCW_FLAGS_MASK_DNV;
schib->pmcw.devno = sch->devno;
/* single path */
schib->pmcw.pim = 0x80;
schib->pmcw.pom = 0xff;
schib->pmcw.pam = 0x80;
schib->pmcw.chpid[0] = chpid;
if (!css->chpids[chpid].in_use) {
css_add_chpid(sch->cssid, chpid, type, true);
}
memset(&schib->scsw, 0, sizeof(SCSW));
schib->mba = 0;
for (i = 0; i < ARRAY_SIZE(schib->mda); i++) {
schib->mda[i] = 0;
}
}
SubchDev *css_find_subch(uint8_t m, uint8_t cssid, uint8_t ssid, uint16_t schid)
{
uint8_t real_cssid;
real_cssid = (!m && (cssid == 0)) ? channel_subsys.default_cssid : cssid;
if (!channel_subsys.css[real_cssid]) {
return NULL;
}
if (!channel_subsys.css[real_cssid]->sch_set[ssid]) {
return NULL;
}
return channel_subsys.css[real_cssid]->sch_set[ssid]->sch[schid];
}
/**
* Return free device number in subchannel set.
*
* Return index of the first free device number in the subchannel set
* identified by @p cssid and @p ssid, beginning the search at @p
* start and wrapping around at MAX_DEVNO. Return a value exceeding
* MAX_SCHID if there are no free device numbers in the subchannel
* set.
*/
static uint32_t css_find_free_devno(uint8_t cssid, uint8_t ssid,
uint16_t start)
{
uint32_t round;
for (round = 0; round <= MAX_DEVNO; round++) {
uint16_t devno = (start + round) % MAX_DEVNO;
if (!css_devno_used(cssid, ssid, devno)) {
return devno;
}
}
return MAX_DEVNO + 1;
}
/**
* Return first free subchannel (id) in subchannel set.
*
* Return index of the first free subchannel in the subchannel set
* identified by @p cssid and @p ssid, if there is any. Return a value
* exceeding MAX_SCHID if there are no free subchannels in the
* subchannel set.
*/
static uint32_t css_find_free_subch(uint8_t cssid, uint8_t ssid)
{
uint32_t schid;
for (schid = 0; schid <= MAX_SCHID; schid++) {
if (!css_find_subch(1, cssid, ssid, schid)) {
return schid;
}
}
return MAX_SCHID + 1;
}
/**
* Return first free subchannel (id) in subchannel set for a device number
*
* Verify the device number @p devno is not used yet in the subchannel
* set identified by @p cssid and @p ssid. Set @p schid to the index
* of the first free subchannel in the subchannel set, if there is
* any. Return true if everything succeeded and false otherwise.
*/
static bool css_find_free_subch_for_devno(uint8_t cssid, uint8_t ssid,
uint16_t devno, uint16_t *schid,
Error **errp)
{
uint32_t free_schid;
assert(schid);
if (css_devno_used(cssid, ssid, devno)) {
error_setg(errp, "Device %x.%x.%04x already exists",
cssid, ssid, devno);
return false;
}
free_schid = css_find_free_subch(cssid, ssid);
if (free_schid > MAX_SCHID) {
error_setg(errp, "No free subchannel found for %x.%x.%04x",
cssid, ssid, devno);
return false;
}
*schid = free_schid;
return true;
}
/**
* Return first free subchannel (id) and device number
*
* Locate the first free subchannel and first free device number in
* any of the subchannel sets of the channel subsystem identified by
* @p cssid. Return false if no free subchannel / device number could
* be found. Otherwise set @p ssid, @p devno and @p schid to identify
* the available subchannel and device number and return true.
*
* May modify @p ssid, @p devno and / or @p schid even if no free
* subchannel / device number could be found.
*/
static bool css_find_free_subch_and_devno(uint8_t cssid, uint8_t *ssid,
uint16_t *devno, uint16_t *schid,
Error **errp)
{
uint32_t free_schid, free_devno;
assert(ssid && devno && schid);
for (*ssid = 0; *ssid <= MAX_SSID; (*ssid)++) {
free_schid = css_find_free_subch(cssid, *ssid);
if (free_schid > MAX_SCHID) {
continue;
}
free_devno = css_find_free_devno(cssid, *ssid, free_schid);
if (free_devno > MAX_DEVNO) {
continue;
}
*schid = free_schid;
*devno = free_devno;
return true;
}
error_setg(errp, "Virtual channel subsystem is full!");
return false;
}
bool css_subch_visible(SubchDev *sch)
{
if (sch->ssid > channel_subsys.max_ssid) {
return false;
}
if (sch->cssid != channel_subsys.default_cssid) {
return (channel_subsys.max_cssid > 0);
}
return true;
}
bool css_present(uint8_t cssid)
{
return (channel_subsys.css[cssid] != NULL);
}
bool css_devno_used(uint8_t cssid, uint8_t ssid, uint16_t devno)
{
if (!channel_subsys.css[cssid]) {
return false;
}
if (!channel_subsys.css[cssid]->sch_set[ssid]) {
return false;
}
return !!test_bit(devno,
channel_subsys.css[cssid]->sch_set[ssid]->devnos_used);
}
void css_subch_assign(uint8_t cssid, uint8_t ssid, uint16_t schid,
uint16_t devno, SubchDev *sch)
{
CssImage *css;
SubchSet *s_set;
trace_css_assign_subch(sch ? "assign" : "deassign", cssid, ssid, schid,
devno);
if (!channel_subsys.css[cssid]) {
fprintf(stderr,
"Suspicious call to %s (%x.%x.%04x) for non-existing css!\n",
__func__, cssid, ssid, schid);
return;
}
css = channel_subsys.css[cssid];
if (!css->sch_set[ssid]) {
css->sch_set[ssid] = g_new0(SubchSet, 1);
}
s_set = css->sch_set[ssid];
s_set->sch[schid] = sch;
if (sch) {
set_bit(schid, s_set->schids_used);
set_bit(devno, s_set->devnos_used);
} else {
clear_bit(schid, s_set->schids_used);
clear_bit(devno, s_set->devnos_used);
}
}
void css_crw_add_to_queue(CRW crw)
{
CrwContainer *crw_cont;
trace_css_crw((crw.flags & CRW_FLAGS_MASK_RSC) >> 8,
crw.flags & CRW_FLAGS_MASK_ERC,
crw.rsid,
(crw.flags & CRW_FLAGS_MASK_C) ? "(chained)" : "");
/* TODO: Maybe use a static crw pool? */
crw_cont = g_try_new0(CrwContainer, 1);
if (!crw_cont) {
channel_subsys.crws_lost = true;
return;
}
crw_cont->crw = crw;
QTAILQ_INSERT_TAIL(&channel_subsys.pending_crws, crw_cont, sibling);
if (channel_subsys.do_crw_mchk) {
channel_subsys.do_crw_mchk = false;
/* Inject crw pending machine check. */
s390_crw_mchk();
}
}
void css_queue_crw(uint8_t rsc, uint8_t erc, int solicited,
int chain, uint16_t rsid)
{
CRW crw;
crw.flags = (rsc << 8) | erc;
if (solicited) {
crw.flags |= CRW_FLAGS_MASK_S;
}
if (chain) {
crw.flags |= CRW_FLAGS_MASK_C;
}
crw.rsid = rsid;
if (channel_subsys.crws_lost) {
crw.flags |= CRW_FLAGS_MASK_R;
channel_subsys.crws_lost = false;
}
css_crw_add_to_queue(crw);
}
void css_generate_sch_crws(uint8_t cssid, uint8_t ssid, uint16_t schid,
int hotplugged, int add)
{
uint8_t guest_cssid;
bool chain_crw;
if (add && !hotplugged) {
return;
}
if (channel_subsys.max_cssid == 0) {
/* Default cssid shows up as 0. */
guest_cssid = (cssid == channel_subsys.default_cssid) ? 0 : cssid;
} else {
/* Show real cssid to the guest. */
guest_cssid = cssid;
}
/*
* Only notify for higher subchannel sets/channel subsystems if the
* guest has enabled it.
*/
if ((ssid > channel_subsys.max_ssid) ||
(guest_cssid > channel_subsys.max_cssid) ||
((channel_subsys.max_cssid == 0) &&
(cssid != channel_subsys.default_cssid))) {
return;
}
chain_crw = (channel_subsys.max_ssid > 0) ||
(channel_subsys.max_cssid > 0);
css_queue_crw(CRW_RSC_SUBCH, CRW_ERC_IPI, 0, chain_crw ? 1 : 0, schid);
if (chain_crw) {
css_queue_crw(CRW_RSC_SUBCH, CRW_ERC_IPI, 0, 0,
(guest_cssid << 8) | (ssid << 4));
}
/* RW_ERC_IPI --> clear pending interrupts */
css_clear_io_interrupt(css_do_build_subchannel_id(cssid, ssid), schid);
}
void css_generate_chp_crws(uint8_t cssid, uint8_t chpid)
{
/* TODO */
}
void css_generate_css_crws(uint8_t cssid)
{
if (!channel_subsys.sei_pending) {
css_queue_crw(CRW_RSC_CSS, CRW_ERC_EVENT, 0, 0, cssid);
}
channel_subsys.sei_pending = true;
}
void css_clear_sei_pending(void)
{
channel_subsys.sei_pending = false;
}
int css_enable_mcsse(void)
{
trace_css_enable_facility("mcsse");
channel_subsys.max_cssid = MAX_CSSID;
return 0;
}
int css_enable_mss(void)
{
trace_css_enable_facility("mss");
channel_subsys.max_ssid = MAX_SSID;
return 0;
}
void css_reset_sch(SubchDev *sch)
{
SCHIB *schib = &sch->curr_status;
if ((schib->pmcw.flags & PMCW_FLAGS_MASK_ENA) != 0 && sch->disable_cb) {
sch->disable_cb(sch);
}
schib->pmcw.intparm = 0;
schib->pmcw.flags &= ~(PMCW_FLAGS_MASK_ISC | PMCW_FLAGS_MASK_ENA |
PMCW_FLAGS_MASK_LM | PMCW_FLAGS_MASK_MME |
PMCW_FLAGS_MASK_MP | PMCW_FLAGS_MASK_TF);
schib->pmcw.flags |= PMCW_FLAGS_MASK_DNV;
schib->pmcw.devno = sch->devno;
schib->pmcw.pim = 0x80;
schib->pmcw.lpm = schib->pmcw.pim;
schib->pmcw.pnom = 0;
schib->pmcw.lpum = 0;
schib->pmcw.mbi = 0;
schib->pmcw.pom = 0xff;
schib->pmcw.pam = 0x80;
schib->pmcw.chars &= ~(PMCW_CHARS_MASK_MBFC | PMCW_CHARS_MASK_XMWME |
PMCW_CHARS_MASK_CSENSE);
memset(&schib->scsw, 0, sizeof(schib->scsw));
schib->mba = 0;
sch->channel_prog = 0x0;
sch->last_cmd_valid = false;
sch->thinint_active = false;
}
void css_reset(void)
{
CrwContainer *crw_cont;
/* Clean up monitoring. */
channel_subsys.chnmon_active = false;
channel_subsys.chnmon_area = 0;
/* Clear pending CRWs. */
while ((crw_cont = QTAILQ_FIRST(&channel_subsys.pending_crws))) {
QTAILQ_REMOVE(&channel_subsys.pending_crws, crw_cont, sibling);
g_free(crw_cont);
}
channel_subsys.sei_pending = false;
channel_subsys.do_crw_mchk = true;
channel_subsys.crws_lost = false;
/* Reset maximum ids. */
channel_subsys.max_cssid = 0;
channel_subsys.max_ssid = 0;
}
static void get_css_devid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
CssDevId *dev_id = object_field_prop_ptr(obj, prop);
char buffer[] = "xx.x.xxxx";
char *p = buffer;
int r;
if (dev_id->valid) {
r = snprintf(buffer, sizeof(buffer), "%02x.%1x.%04x", dev_id->cssid,
dev_id->ssid, dev_id->devid);
assert(r == sizeof(buffer) - 1);
/* drop leading zero */
if (dev_id->cssid <= 0xf) {
p++;
}
} else {
snprintf(buffer, sizeof(buffer), "<unset>");
}
visit_type_str(v, name, &p, errp);
}
/*
* parse <cssid>.<ssid>.<devid> and assert valid range for cssid/ssid
*/
static void set_css_devid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
CssDevId *dev_id = object_field_prop_ptr(obj, prop);
char *str;
int num, n1, n2;
unsigned int cssid, ssid, devid;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_str(v, name, &str, errp)) {
return;
}
num = sscanf(str, "%2x.%1x%n.%4x%n", &cssid, &ssid, &n1, &devid, &n2);
if (num != 3 || (n2 - n1) != 5 || strlen(str) != n2) {
error_set_from_qdev_prop_error(errp, EINVAL, obj, name, str);
goto out;
}
if ((cssid > MAX_CSSID) || (ssid > MAX_SSID)) {
error_setg(errp, "Invalid cssid or ssid: cssid %x, ssid %x",
cssid, ssid);
goto out;
}
dev_id->cssid = cssid;
dev_id->ssid = ssid;
dev_id->devid = devid;
dev_id->valid = true;
out:
g_free(str);
}
const PropertyInfo css_devid_propinfo = {
.name = "str",
.description = "Identifier of an I/O device in the channel "
"subsystem, example: fe.1.23ab",
.get = get_css_devid,
.set = set_css_devid,
};
const PropertyInfo css_devid_ro_propinfo = {
.name = "str",
.description = "Read-only identifier of an I/O device in the channel "
"subsystem, example: fe.1.23ab",
.get = get_css_devid,
};
SubchDev *css_create_sch(CssDevId bus_id, Error **errp)
{
uint16_t schid = 0;
SubchDev *sch;
if (bus_id.valid) {
if (!channel_subsys.css[bus_id.cssid]) {
css_create_css_image(bus_id.cssid, false);
}
if (!css_find_free_subch_for_devno(bus_id.cssid, bus_id.ssid,
bus_id.devid, &schid, errp)) {
return NULL;
}
} else {
s390x/css: unrestrict cssids The default css 0xfe is currently restricted to virtual subchannel devices. The hope when the decision was made was, that non-virtual subchannel devices will come around when guest can exploit multiple channel subsystems. Since the guests generally don't do, the pain of the partitioned (cssid) namespace outweighs the gain. Let us remove the corresponding restrictions (virtual devices can be put only in 0xfe and non-virtual devices in any css except the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0). At the same time, change our schema for generating css bus ids to put both virtual and non-virtual devices into the default css (spilling over into other css images, if needed). The intention is to deprecate s390-squash-mcss. With this change devices without a specified devno won't end up hidden to guests not supporting multiple channel subsystems, unless this can not be avoided (default css full). Let us also advertise the changes to the management software (so it can tell are cssids unrestricted or restricted). The adverse effect of getting rid of the restriction on migration should not be too severe. Vfio-ccw devices are not live-migratable yet, and for virtual devices using the extra freedom would only make sense with the aforementioned guest support in place. The auto-generated bus ids are affected by both changes. We hope to not encounter any auto-generated bus ids in production as Libvirt is always explicit about the bus id. Since 8ed179c937 ("s390x/css: catch section mismatch on load", 2017-05-18) the worst that can happen because the same device ended up having a different bus id is a cleanly failed migration. I find it hard to reason about the impact of changed auto-generated bus ids on migration for command line users as I don't know which rules is such an user supposed to follow. Another pain-point is down- or upgrade of QEMU for command line users. The old way and the new way of doing vfio-ccw are mutually incompatible. Libvirt is only going to support the new way, so for libvirt users, the possible problems at QEMU downgrade are the following. If a domain contains virtual devices placed into a css different than 0xfe the domain will refuse to start with a QEMU not having this patch. Putting devices into a css different that 0xfe however won't make much sense in the near future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU not having this patch. This is business as usual. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-06 15:44:37 +01:00
for (bus_id.cssid = channel_subsys.default_cssid;;) {
if (!channel_subsys.css[bus_id.cssid]) {
css_create_css_image(bus_id.cssid, false);
}
if (css_find_free_subch_and_devno(bus_id.cssid, &bus_id.ssid,
&bus_id.devid, &schid,
NULL)) {
break;
}
s390x/css: unrestrict cssids The default css 0xfe is currently restricted to virtual subchannel devices. The hope when the decision was made was, that non-virtual subchannel devices will come around when guest can exploit multiple channel subsystems. Since the guests generally don't do, the pain of the partitioned (cssid) namespace outweighs the gain. Let us remove the corresponding restrictions (virtual devices can be put only in 0xfe and non-virtual devices in any css except the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0). At the same time, change our schema for generating css bus ids to put both virtual and non-virtual devices into the default css (spilling over into other css images, if needed). The intention is to deprecate s390-squash-mcss. With this change devices without a specified devno won't end up hidden to guests not supporting multiple channel subsystems, unless this can not be avoided (default css full). Let us also advertise the changes to the management software (so it can tell are cssids unrestricted or restricted). The adverse effect of getting rid of the restriction on migration should not be too severe. Vfio-ccw devices are not live-migratable yet, and for virtual devices using the extra freedom would only make sense with the aforementioned guest support in place. The auto-generated bus ids are affected by both changes. We hope to not encounter any auto-generated bus ids in production as Libvirt is always explicit about the bus id. Since 8ed179c937 ("s390x/css: catch section mismatch on load", 2017-05-18) the worst that can happen because the same device ended up having a different bus id is a cleanly failed migration. I find it hard to reason about the impact of changed auto-generated bus ids on migration for command line users as I don't know which rules is such an user supposed to follow. Another pain-point is down- or upgrade of QEMU for command line users. The old way and the new way of doing vfio-ccw are mutually incompatible. Libvirt is only going to support the new way, so for libvirt users, the possible problems at QEMU downgrade are the following. If a domain contains virtual devices placed into a css different than 0xfe the domain will refuse to start with a QEMU not having this patch. Putting devices into a css different that 0xfe however won't make much sense in the near future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU not having this patch. This is business as usual. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-06 15:44:37 +01:00
bus_id.cssid = (bus_id.cssid + 1) % MAX_CSSID;
if (bus_id.cssid == channel_subsys.default_cssid) {
error_setg(errp, "Virtual channel subsystem is full!");
return NULL;
}
}
}
sch = g_new0(SubchDev, 1);
sch->cssid = bus_id.cssid;
sch->ssid = bus_id.ssid;
sch->devno = bus_id.devid;
sch->schid = schid;
css_subch_assign(sch->cssid, sch->ssid, schid, sch->devno, sch);
return sch;
}
static int css_sch_get_chpids(SubchDev *sch, CssDevId *dev_id)
{
char *fid_path;
FILE *fd;
uint32_t chpid[8];
int i;
SCHIB *schib = &sch->curr_status;
fid_path = g_strdup_printf("/sys/bus/css/devices/%x.%x.%04x/chpids",
dev_id->cssid, dev_id->ssid, dev_id->devid);
fd = fopen(fid_path, "r");
if (fd == NULL) {
error_report("%s: open %s failed", __func__, fid_path);
g_free(fid_path);
return -EINVAL;
}
if (fscanf(fd, "%x %x %x %x %x %x %x %x",
&chpid[0], &chpid[1], &chpid[2], &chpid[3],
&chpid[4], &chpid[5], &chpid[6], &chpid[7]) != 8) {
fclose(fd);
g_free(fid_path);
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(schib->pmcw.chpid); i++) {
schib->pmcw.chpid[i] = chpid[i];
}
fclose(fd);
g_free(fid_path);
return 0;
}
static int css_sch_get_path_masks(SubchDev *sch, CssDevId *dev_id)
{
char *fid_path;
FILE *fd;
uint32_t pim, pam, pom;
SCHIB *schib = &sch->curr_status;
fid_path = g_strdup_printf("/sys/bus/css/devices/%x.%x.%04x/pimpampom",
dev_id->cssid, dev_id->ssid, dev_id->devid);
fd = fopen(fid_path, "r");
if (fd == NULL) {
error_report("%s: open %s failed", __func__, fid_path);
g_free(fid_path);
return -EINVAL;
}
if (fscanf(fd, "%x %x %x", &pim, &pam, &pom) != 3) {
fclose(fd);
g_free(fid_path);
return -EINVAL;
}
schib->pmcw.pim = pim;
schib->pmcw.pam = pam;
schib->pmcw.pom = pom;
fclose(fd);
g_free(fid_path);
return 0;
}
static int css_sch_get_chpid_type(uint8_t chpid, uint32_t *type,
CssDevId *dev_id)
{
char *fid_path;
FILE *fd;
fid_path = g_strdup_printf("/sys/devices/css%x/chp0.%02x/type",
dev_id->cssid, chpid);
fd = fopen(fid_path, "r");
if (fd == NULL) {
error_report("%s: open %s failed", __func__, fid_path);
g_free(fid_path);
return -EINVAL;
}
if (fscanf(fd, "%x", type) != 1) {
fclose(fd);
g_free(fid_path);
return -EINVAL;
}
fclose(fd);
g_free(fid_path);
return 0;
}
/*
* We currently retrieve the real device information from sysfs to build the
* guest subchannel information block without considering the migration feature.
* We need to revisit this problem when we want to add migration support.
*/
int css_sch_build_schib(SubchDev *sch, CssDevId *dev_id)
{
CssImage *css = channel_subsys.css[sch->cssid];
SCHIB *schib = &sch->curr_status;
uint32_t type;
int i, ret;
assert(css != NULL);
memset(&schib->pmcw, 0, sizeof(PMCW));
schib->pmcw.flags |= PMCW_FLAGS_MASK_DNV;
/* We are dealing with I/O subchannels only. */
schib->pmcw.devno = sch->devno;
/* Grab path mask from sysfs. */
ret = css_sch_get_path_masks(sch, dev_id);
if (ret) {
return ret;
}
/* Grab chpids from sysfs. */
ret = css_sch_get_chpids(sch, dev_id);
if (ret) {
return ret;
}
/* Build chpid type. */
for (i = 0; i < ARRAY_SIZE(schib->pmcw.chpid); i++) {
if (schib->pmcw.chpid[i] && !css->chpids[schib->pmcw.chpid[i]].in_use) {
ret = css_sch_get_chpid_type(schib->pmcw.chpid[i], &type, dev_id);
if (ret) {
return ret;
}
css_add_chpid(sch->cssid, schib->pmcw.chpid[i], type, false);
}
}
memset(&schib->scsw, 0, sizeof(SCSW));
schib->mba = 0;
for (i = 0; i < ARRAY_SIZE(schib->mda); i++) {
schib->mda[i] = 0;
}
return 0;
}