qemu-e2k/hw/arm/allwinner-a10.c

197 lines
7.0 KiB
C
Raw Normal View History

/*
* Allwinner A10 SoC emulation
*
* Copyright (C) 2013 Li Guang
* Written by Li Guang <lig.fnst@cn.fujitsu.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include "qemu/osdep.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/module.h"
#include "hw/sysbus.h"
#include "hw/arm/allwinner-a10.h"
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and: 7. System Control 7.1. Overview A10 embeds a high-speed SRAM which has been split into five segments. See detailed memory mapping in following table: Area Address Size (Bytes) A1 0x00000000-0x00003FFF 16K A2 0x00004000-0x00007FFF 16K A3 0x00008000-0x0000B3FF 13K A4 0x0000B400-0x0000BFFF 3K Since for emulation purpose we don't need the segmentations, we simply define the 'A' area as a single 48KB SRAM. We don't implement the following others areas: - 'B': 'Secure RAM' (64K), - 'C': Debug/ISP SRAM - 'D': USB SRAM (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000bfff (prio 0, ram): sram A 0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl 0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac 0000000001c18000-0000000001c18fff (prio 0, i/o): ahci 0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci 0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic 0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer 0000000001c28000-0000000001c2801f (prio 0, i/o): serial 0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram Reported-by: Charlie Smurthwaite <charlie@atech.media> Tested-by: Charlie Smurthwaite <charlie@atech.media> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20190104142921.878-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 16:23:47 +01:00
#include "hw/misc/unimp.h"
#include "sysemu/sysemu.h"
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
#include "hw/boards.h"
#include "hw/usb/hcd-ohci.h"
#define AW_A10_MMC0_BASE 0x01c0f000
#define AW_A10_CCM_BASE 0x01c20000
#define AW_A10_PIC_REG_BASE 0x01c20400
#define AW_A10_PIT_REG_BASE 0x01c20c00
#define AW_A10_UART0_REG_BASE 0x01c28000
#define AW_A10_EMAC_BASE 0x01c0b000
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
#define AW_A10_EHCI_BASE 0x01c14000
#define AW_A10_OHCI_BASE 0x01c14400
#define AW_A10_SATA_BASE 0x01c18000
#define AW_A10_RTC_BASE 0x01c20d00
static void aw_a10_init(Object *obj)
{
AwA10State *s = AW_A10(obj);
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 07:32:25 +02:00
object_initialize_child(obj, "cpu", &s->cpu,
ARM_CPU_TYPE_NAME("cortex-a8"));
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "intc", &s->intc, TYPE_AW_A10_PIC);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT);
object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
if (machine_usb(current_machine)) {
int i;
for (i = 0; i < AW_A10_NUM_USB; i++) {
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "ehci[*]", &s->ehci[i],
TYPE_PLATFORM_EHCI);
object_initialize_child(obj, "ohci[*]", &s->ohci[i],
TYPE_SYSBUS_OHCI);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
}
}
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "mmc0", &s->mmc0, TYPE_AW_SDHOST_SUN4I);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN4I);
}
static void aw_a10_realize(DeviceState *dev, Error **errp)
{
AwA10State *s = AW_A10(dev);
SysBusDevice *sysbusdev;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!qdev_realize(DEVICE(&s->cpu), NULL, errp)) {
return;
}
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->intc), errp)) {
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->intc);
sysbus_mmio_map(sysbusdev, 0, AW_A10_PIC_REG_BASE);
sysbus_connect_irq(sysbusdev, 0,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
sysbus_connect_irq(sysbusdev, 1,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
qdev_pass_gpios(DEVICE(&s->intc), dev, NULL);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer), errp)) {
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->timer);
sysbus_mmio_map(sysbusdev, 0, AW_A10_PIT_REG_BASE);
sysbus_connect_irq(sysbusdev, 0, qdev_get_gpio_in(dev, 22));
sysbus_connect_irq(sysbusdev, 1, qdev_get_gpio_in(dev, 23));
sysbus_connect_irq(sysbusdev, 2, qdev_get_gpio_in(dev, 24));
sysbus_connect_irq(sysbusdev, 3, qdev_get_gpio_in(dev, 25));
sysbus_connect_irq(sysbusdev, 4, qdev_get_gpio_in(dev, 67));
sysbus_connect_irq(sysbusdev, 5, qdev_get_gpio_in(dev, 68));
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and: 7. System Control 7.1. Overview A10 embeds a high-speed SRAM which has been split into five segments. See detailed memory mapping in following table: Area Address Size (Bytes) A1 0x00000000-0x00003FFF 16K A2 0x00004000-0x00007FFF 16K A3 0x00008000-0x0000B3FF 13K A4 0x0000B400-0x0000BFFF 3K Since for emulation purpose we don't need the segmentations, we simply define the 'A' area as a single 48KB SRAM. We don't implement the following others areas: - 'B': 'Secure RAM' (64K), - 'C': Debug/ISP SRAM - 'D': USB SRAM (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000bfff (prio 0, ram): sram A 0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl 0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac 0000000001c18000-0000000001c18fff (prio 0, i/o): ahci 0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci 0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic 0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer 0000000001c28000-0000000001c2801f (prio 0, i/o): serial 0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram Reported-by: Charlie Smurthwaite <charlie@atech.media> Tested-by: Charlie Smurthwaite <charlie@atech.media> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20190104142921.878-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 16:23:47 +01:00
memory_region_init_ram(&s->sram_a, OBJECT(dev), "sram A", 48 * KiB,
&error_fatal);
memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a);
create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB);
/* Clock Control Module */
sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE);
hw/arm/allwinner-a10: Do not use nd_table in instance_init function The instance_init function of a device can be called at any time, even if the device is not going to be used (i.e. not going to be realized). So a instance_init function must not do things that could cause QEMU to exit, like calling qemu_check_nic_model(&nd_table[0], ...) for example. But this is what the instance_init function of the allwinner-a10 device is currently doing - and this causes QEMU to quit unexpectedly when you run the 'device-list-properties' QMP command for example: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'allwinner-a10'}}" \ | arm-softmmu/qemu-system-arm -M mps2-an505,accel=qtest -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} Unsupported NIC model: lan9118 ... and QEMU quits after printing the last line (which should not happen just because of running 'device-list-properties' here). And with the cubieboard, this even causes QEMU to abort(): $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'allwinner-a10'}}" \ | arm-softmmu/qemu-system-arm -M cubieboard,accel=qtest -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} Unexpected error in error_set_from_qdev_prop_error() at hw/core/qdev-properties.c:1095: Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use Aborted (core dumped) To fix the problem we've got to move the offending code to the realize function instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1522862420-7484-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-10 14:02:25 +02:00
/* FIXME use qdev NIC properties instead of nd_table[] */
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC);
qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
}
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->emac), errp)) {
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->emac);
sysbus_mmio_map(sysbusdev, 0, AW_A10_EMAC_BASE);
sysbus_connect_irq(sysbusdev, 0, qdev_get_gpio_in(dev, 55));
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sata), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, AW_A10_SATA_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, qdev_get_gpio_in(dev, 56));
/* FIXME use a qdev chardev prop instead of serial_hd() */
serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2,
qdev_get_gpio_in(dev, 1),
115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
if (machine_usb(current_machine)) {
int i;
for (i = 0; i < AW_A10_NUM_USB; i++) {
g_autofree char *bus = g_strdup_printf("usb-bus.%d", i);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_bool(OBJECT(&s->ehci[i]), "companion-enable",
true, &error_fatal);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), &error_fatal);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
AW_A10_EHCI_BASE + i * 0x8000);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
qdev_get_gpio_in(dev, 39 + i));
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_str(OBJECT(&s->ohci[i]), "masterbus", bus,
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
&error_fatal);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
sysbus_realize(SYS_BUS_DEVICE(&s->ohci[i]), &error_fatal);
arm: allwinner: Wire up USB ports Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are modeled as companions of the respective EHCI ports. With this patch applied, USB controllers are discovered and instantiated when booting the cubieboard machine with a recent Linux kernel. ehci-platform 1c14000.usb: EHCI Host Controller ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000 ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 ehci-platform 1c1c000.usb: EHCI Host Controller ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 ohci-platform 1c14400.usb: Generic Platform OHCI controller ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400 ohci-platform 1c1c400.usb: Generic Platform OHCI controller ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 usb 2-1: new high-speed USB device number 2 using ehci-platform usb-storage 2-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1:1.0 usb 3-1: new full-speed USB device number 2 using ohci-platform input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0 Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200217204812.9857-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-17 21:48:12 +01:00
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci[i]), 0,
AW_A10_OHCI_BASE + i * 0x8000);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci[i]), 0,
qdev_get_gpio_in(dev, 64 + i));
}
}
/* SD/MMC */
object_property_set_link(OBJECT(&s->mmc0), "dma-memory",
OBJECT(get_system_memory()), &error_fatal);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, AW_A10_MMC0_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32));
object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
"sd-bus");
/* RTC */
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 07:32:37 +02:00
sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal);
sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10);
}
static void aw_a10_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = aw_a10_realize;
hw/arm/allwinner-a10: Do not use nd_table in instance_init function The instance_init function of a device can be called at any time, even if the device is not going to be used (i.e. not going to be realized). So a instance_init function must not do things that could cause QEMU to exit, like calling qemu_check_nic_model(&nd_table[0], ...) for example. But this is what the instance_init function of the allwinner-a10 device is currently doing - and this causes QEMU to quit unexpectedly when you run the 'device-list-properties' QMP command for example: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'allwinner-a10'}}" \ | arm-softmmu/qemu-system-arm -M mps2-an505,accel=qtest -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} Unsupported NIC model: lan9118 ... and QEMU quits after printing the last line (which should not happen just because of running 'device-list-properties' here). And with the cubieboard, this even causes QEMU to abort(): $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'allwinner-a10'}}" \ | arm-softmmu/qemu-system-arm -M cubieboard,accel=qtest -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} Unexpected error in error_set_from_qdev_prop_error() at hw/core/qdev-properties.c:1095: Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use Aborted (core dumped) To fix the problem we've got to move the offending code to the realize function instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1522862420-7484-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-10 14:02:25 +02:00
/* Reason: Uses serial_hds and nd_table in realize function */
dc->user_creatable = false;
}
static const TypeInfo aw_a10_type_info = {
.name = TYPE_AW_A10,
.parent = TYPE_DEVICE,
.instance_size = sizeof(AwA10State),
.instance_init = aw_a10_init,
.class_init = aw_a10_class_init,
};
static void aw_a10_register_types(void)
{
type_register_static(&aw_a10_type_info);
}
type_init(aw_a10_register_types)