qemu-e2k/hw/net/Makefile.objs

60 lines
2.5 KiB
Makefile
Raw Normal View History

common-obj-$(CONFIG_DP8393X) += dp8393x.o
common-obj-$(CONFIG_XEN) += xen_nic.o
common-obj-$(CONFIG_NE2000_COMMON) += ne2000.o
# PCI network cards
common-obj-$(CONFIG_NE2000_PCI) += ne2000-pci.o
common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
common-obj-$(CONFIG_E1000_PCI) += e1000.o e1000x_common.o
common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += net_tx_pkt.o net_rx_pkt.o
common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += e1000e.o e1000e_core.o e1000x_common.o
common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
common-obj-$(CONFIG_VMXNET3_PCI) += net_tx_pkt.o net_rx_pkt.o
common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet3.o
common-obj-$(CONFIG_TULIP) += tulip.o
common-obj-$(CONFIG_SMC91C111) += smc91c111.o
common-obj-$(CONFIG_LAN9118) += lan9118.o
common-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
common-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
common-obj-$(CONFIG_XGMAC) += xgmac.o
common-obj-$(CONFIG_MIPSNET) += mipsnet.o
common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
common-obj-$(CONFIG_ALLWINNER_EMAC) += allwinner_emac.o
common-obj-$(CONFIG_ALLWINNER_SUN8I_EMAC) += allwinner-sun8i-emac.o
common-obj-$(CONFIG_IMX_FEC) += imx_fec.o
common-obj-$(CONFIG_CADENCE) += cadence_gem.o
common-obj-$(CONFIG_STELLARIS_ENET) += stellaris_enet.o
common-obj-$(CONFIG_LANCE) += lance.o
common-obj-$(CONFIG_LASI_82596) += lasi_i82596.o
common-obj-$(CONFIG_I82596_COMMON) += i82596.o
common-obj-$(CONFIG_SUNHME) += sunhme.o
common-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
common-obj-$(CONFIG_SUNGEM) += sungem.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
common-obj-$(CONFIG_COLDFIRE) += mcf_fec.o
obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
obj-$(CONFIG_PSERIES) += spapr_llan.o
obj-$(CONFIG_XILINX_ETHLITE) += xilinx_ethlite.o
common-obj-$(CONFIG_VIRTIO_NET) += net_rx_pkt.o
obj-$(CONFIG_VIRTIO_NET) += virtio-net.o
common-obj-$(call land,$(CONFIG_VIRTIO_NET),$(CONFIG_VHOST_NET)) += vhost_net.o
common-obj-$(call lnot,$(call land,$(CONFIG_VIRTIO_NET),$(CONFIG_VHOST_NET))) += vhost_net-stub.o
common-obj-$(CONFIG_ALL) += vhost_net-stub.o
common-obj-$(CONFIG_ETSEC) += fsl_etsec/etsec.o fsl_etsec/registers.o \
fsl_etsec/rings.o fsl_etsec/miim.o
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
common-obj-$(CONFIG_ROCKER) += rocker/rocker.o rocker/rocker_fp.o \
rocker/rocker_desc.o rocker/rocker_world.o \
rocker/rocker_of_dpa.o
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
obj-$(call lnot,$(CONFIG_ROCKER)) += rocker/qmp-norocker.o
common-obj-$(CONFIG_CAN_BUS) += can/
common-obj-$(CONFIG_MSF2) += msf2-emac.o