qemu-e2k/Makefile

392 lines
15 KiB
Makefile
Raw Normal View History

# Makefile for QEMU.
GENERATED_HEADERS = config-host.h trace.h qemu-options.def
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
ifeq ($(TRACE_BACKEND),dtrace)
GENERATED_HEADERS += trace-dtrace.h
endif
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
config-host.mak: $(SRC_PATH)/configure
@echo $@ is out-of-date, running configure
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
else
config-host.mak:
@echo "Please call configure before running make!"
@exit 1
endif
# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;
.PHONY: all clean cscope distclean dvi html info install install-doc \
pdf recurse-all speed tar tarbin test build-all
$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
LIBS+=-lz $(LIBS_TOOLS)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 QMP/qmp-commands.txt
else
DOCS=
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %/config-devices.mak.d, $(TARGET_DIRS))
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@")
-include $(SUBDIR_DEVICES_MAK_DEP)
%/config-devices.mak: default-configs/%.mak
$(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, " GEN $@")
@if test -f $@; then \
if cmp -s $@.old $@; then \
mv $@.tmp $@; \
cp -p $@ $@.old; \
else \
if test -f $@.old; then \
echo "WARNING: $@ (user modified) out of date.";\
else \
echo "WARNING: $@ out of date.";\
fi; \
echo "Run \"make defconfig\" to regenerate."; \
rm $@.tmp; \
fi; \
else \
mv $@.tmp $@; \
cp -p $@ $@.old; \
fi
defconfig:
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
-include config-all-devices.mak
build-all: $(DOCS) $(TOOLS) recurse-all
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%: $(GENERATED_HEADERS)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
endif
$(common-obj-y): $(GENERATED_HEADERS)
subdir-libcacard: $(oslib-obj-y) $(trace-obj-y) qemu-malloc.o qemu-timer-common.o
$(filter %-softmmu,$(SUBDIR_RULES)): $(trace-obj-y) $(common-obj-y) subdir-libdis
$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) $(trace-obj-y) subdir-libdis-user subdir-libuser
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
QEMU_CFLAGS+=$(CURL_CFLAGS)
QEMU_CFLAGS+=$(GLIB_CFLAGS)
ui/cocoa.o: ui/cocoa.m
ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
version.o: $(SRC_PATH)/version.rc config-host.mak
$(call quiet-command,$(WINDRES) -I. -o $@ $<," RC $(TARGET_DIR)$@")
version-obj-$(CONFIG_WIN32) += version.o
######################################################################
# Support building shared library libcacard
.PHONY: libcacard.la install-libcacard
ifeq ($(LIBTOOL),)
libcacard.la:
@echo "libtool is missing, please install and rerun configure"; exit 1
install-libcacard:
@echo "libtool is missing, please install and rerun configure"; exit 1
else
libcacard.la: $(GENERATED_HEADERS) $(oslib-obj-y) qemu-malloc.o qemu-timer-common.o $(addsuffix .lo, $(basename $(trace-obj-y)))
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libcacard V="$(V)" TARGET_DIR="$*/" libcacard.la,)
install-libcacard: libcacard.la
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libcacard V="$(V)" TARGET_DIR="$*/" install-libcacard,)
endif
######################################################################
qemu-img.o: qemu-img-cmds.h
qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o qemu-ga.o: $(GENERATED_HEADERS)
qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
check-qint.o check-qstring.o check-qdict.o check-qlist.o check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
CHECK_PROG_DEPS = qemu-malloc.o $(oslib-obj-y) $(trace-obj-y) qemu-tool.o
check-qint: check-qint.o qint.o $(CHECK_PROG_DEPS)
check-qstring: check-qstring.o qstring.o $(CHECK_PROG_DEPS)
check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qlist.o $(CHECK_PROG_DEPS)
check-qlist: check-qlist.o qlist.o qint.o $(CHECK_PROG_DEPS)
check-qfloat: check-qfloat.o qfloat.o $(CHECK_PROG_DEPS)
check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o error.o qerror.o qemu-error.o $(CHECK_PROG_DEPS)
$(qapi-obj-y): $(GENERATED_HEADERS)
qapi-dir := qapi-generated
test-visitor.o test-qmp-commands.o: QEMU_CFLAGS += -I $(qapi-dir)
$(qapi-dir)/test-qapi-types.c: $(qapi-dir)/test-qapi-types.h
$(qapi-dir)/test-qapi-types.h: $(SRC_PATH)/qapi-schema-test.json $(SRC_PATH)/scripts/qapi-types.py
$(call quiet-command,python $(SRC_PATH)/scripts/qapi-types.py -o "$(qapi-dir)" -p "test-" < $<, " GEN $@")
$(qapi-dir)/test-qapi-visit.c: $(qapi-dir)/test-qapi-visit.h
$(qapi-dir)/test-qapi-visit.h: $(SRC_PATH)/qapi-schema-test.json $(SRC_PATH)/scripts/qapi-visit.py
$(call quiet-command,python $(SRC_PATH)/scripts/qapi-visit.py -o "$(qapi-dir)" -p "test-" < $<, " GEN $@")
$(qapi-dir)/test-qmp-commands.h: $(qapi-dir)/test-qmp-marshal.c
$(qapi-dir)/test-qmp-marshal.c: $(SRC_PATH)/qapi-schema-test.json $(SRC_PATH)/scripts/qapi-commands.py
$(call quiet-command,python $(SRC_PATH)/scripts/qapi-commands.py -o "$(qapi-dir)" -p "test-" < $<, " GEN $@")
test-visitor.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h) $(qapi-obj-y)
test-visitor: test-visitor.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o $(qapi-obj-y) error.o osdep.o qemu-malloc.o $(oslib-obj-y) qjson.o json-streamer.o json-lexer.o json-parser.o qerror.o qemu-error.o qemu-tool.o $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
test-qmp-commands.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h test-qmp-marshal.c test-qmp-commands.h) $(qapi-obj-y)
test-qmp-commands: test-qmp-commands.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o $(qapi-obj-y) error.o osdep.o qemu-malloc.o $(oslib-obj-y) qjson.o json-streamer.o json-lexer.o json-parser.o qerror.o qemu-error.o qemu-tool.o $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o $(qapi-dir)/test-qmp-marshal.o module.o
QGALIB=qga/guest-agent-command-state.o
qemu-ga$(EXESUF): qemu-ga.o $(QGALIB) qemu-tool.o qemu-error.o error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) $(qapi-obj-y) qemu-timer-common.o qemu-sockets.o module.o qapi/qmp-dispatch.o qapi/qmp-registry.o
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
QEMULIBS=libhw32 libhw64 libuser libdis libdis-user
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
rm -f *.o *.d *.a *.lo $(TOOLS) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -Rf .libs
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d qga/*.o qga/*.d
rm -f qemu-img-cmds.h
rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
rm -f trace-dtrace.h trace-dtrace.h-timestamp
rm -rf $(qapi-dir)
$(MAKE) -C tests clean
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
for d in $(ALL_SUBDIRS) $(QEMULIBS) libcacard; do \
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
done
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
rm -f config-all-devices.mak
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps qemu-doc.dvi
rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys
rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp
rm -f qemu-doc.vr
rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
for d in $(TARGET_DIRS) $(QEMULIBS); do \
rm -rf $$d || exit 1 ; \
done
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
mpc8544ds.dtb \
multiboot.bin linuxboot.bin \
s390-zipl.rom \
spapr-rtas.bin slof.bin
else
BLOBS=
endif
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 18:14:59 +01:00
install-sysconfig:
$(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(sysconfdir)/qemu"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 18:14:59 +01:00
install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
# various test targets
test speed: all
$(MAKE) -C tests $@
.PHONY: TAGS
TAGS:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
cscope:
rm -f ./cscope.*
find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
cscope -b
# documentation
MAKEINFO=makeinfo
MAKEINFOFLAGS=--no-headers --no-split --number-sections
TEXIFLAG=$(if $(V),,--quiet)
%.dvi: %.texi
$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@")
%.html: %.texi
$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
" GEN $@")
%.info: %.texi
$(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@")
%.pdf: %.texi
$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@")
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
" GEN $@")
qemu-img.1: qemu-img.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
" GEN $@")
qemu-nbd.8: qemu-nbd.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
" GEN $@")
dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
info: qemu-doc.info qemu-tech.info
pdf: qemu-doc.pdf qemu-tech.pdf
qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
qemu-img.texi qemu-nbd.texi qemu-options.texi \
qemu-monitor.texi qemu-img-cmds.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
cp -r . /tmp/$(FILE)
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
$(patsubst %-softmmu,qemu-system-%, \
$(SYSTEM_TARGETS)))
USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
$(patsubst %-darwin-user,qemu-%, \
$(patsubst %-linux-user,qemu-%, \
$(USER_TARGETS))))
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
$(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
$(patsubst %,$(bindir)/%, $(USER_PROGS)) \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(datadir)/vgabios.bin \
$(datadir)/vgabios-cirrus.bin \
$(datadir)/ppc_rom.bin \
$(datadir)/openbios-sparc32 \
$(datadir)/openbios-sparc64 \
$(datadir)/openbios-ppc \
$(datadir)/pxe-e1000.rom \
$(datadir)/pxe-eepro100.rom \
$(datadir)/pxe-ne2k_pci.rom \
$(datadir)/pxe-pcnet.rom \
$(datadir)/pxe-rtl8139.rom \
$(datadir)/pxe-virtio.rom \
$(docdir)/qemu-doc.html \
$(docdir)/qemu-tech.html \
$(mandir)/man1/qemu.1 \
$(mandir)/man1/qemu-img.1 \
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d qapi/*.d qga/*.d)