qemu-e2k/tests/test-qobject-output-visitor.c

877 lines
29 KiB
C
Raw Normal View History

/*
* QObject Output Visitor unit-tests.
*
* Copyright (C) 2011-2016 Red Hat Inc.
*
* Authors:
* Luiz Capitulino <lcapitulino@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/qobject-output-visitor.h"
#include "test-qapi-types.h"
#include "test-qapi-visit.h"
#include "qapi/qmp/types.h"
#include "qapi/qmp/qjson.h"
typedef struct TestOutputVisitorData {
Visitor *ov;
QObject *obj;
} TestOutputVisitorData;
static void visitor_output_setup(TestOutputVisitorData *data,
const void *unused)
{
data->ov = qobject_output_visitor_new(&data->obj);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:43 +02:00
g_assert(data->ov);
}
static void visitor_output_teardown(TestOutputVisitorData *data,
const void *unused)
{
visit_free(data->ov);
data->ov = NULL;
qobject_decref(data->obj);
data->obj = NULL;
}
static QObject *visitor_get(TestOutputVisitorData *data)
{
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:43 +02:00
visit_complete(data->ov, &data->obj);
g_assert(data->obj);
return data->obj;
}
static void visitor_reset(TestOutputVisitorData *data)
{
visitor_output_teardown(data, NULL);
visitor_output_setup(data, NULL);
}
static void test_visitor_out_int(TestOutputVisitorData *data,
const void *unused)
{
int64_t value = -42;
QObject *obj;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_int(data->ov, NULL, &value, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QINT);
g_assert_cmpint(qint_get_int(qobject_to_qint(obj)), ==, value);
}
static void test_visitor_out_bool(TestOutputVisitorData *data,
const void *unused)
{
bool value = true;
QObject *obj;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_bool(data->ov, NULL, &value, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QBOOL);
g_assert(qbool_get_bool(qobject_to_qbool(obj)) == value);
}
static void test_visitor_out_number(TestOutputVisitorData *data,
const void *unused)
{
double value = 3.14;
QObject *obj;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_number(data->ov, NULL, &value, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QFLOAT);
g_assert(qfloat_get_double(qobject_to_qfloat(obj)) == value);
}
static void test_visitor_out_string(TestOutputVisitorData *data,
const void *unused)
{
char *string = (char *) "Q E M U";
QObject *obj;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_str(data->ov, NULL, &string, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QSTRING);
g_assert_cmpstr(qstring_get_str(qobject_to_qstring(obj)), ==, string);
}
static void test_visitor_out_no_string(TestOutputVisitorData *data,
const void *unused)
{
char *string = NULL;
QObject *obj;
/* A null string should return "" */
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_str(data->ov, NULL, &string, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QSTRING);
g_assert_cmpstr(qstring_get_str(qobject_to_qstring(obj)), ==, "");
}
static void test_visitor_out_enum(TestOutputVisitorData *data,
const void *unused)
{
QObject *obj;
EnumOne i;
for (i = 0; i < ENUM_ONE__MAX; i++) {
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_EnumOne(data->ov, "unused", &i, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QSTRING);
g_assert_cmpstr(qstring_get_str(qobject_to_qstring(obj)), ==,
EnumOne_lookup[i]);
visitor_reset(data);
}
}
static void test_visitor_out_enum_errors(TestOutputVisitorData *data,
const void *unused)
{
EnumOne i, bad_values[] = { ENUM_ONE__MAX, -1 };
Error *err;
for (i = 0; i < ARRAY_SIZE(bad_values) ; i++) {
err = NULL;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_EnumOne(data->ov, "unused", &bad_values[i], &err);
g_assert(err);
error_free(err);
visitor_reset(data);
}
}
static void test_visitor_out_struct(TestOutputVisitorData *data,
const void *unused)
{
TestStruct test_struct = { .integer = 42,
.boolean = false,
.string = (char *) "foo"};
TestStruct *p = &test_struct;
QObject *obj;
QDict *qdict;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_TestStruct(data->ov, NULL, &p, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QDICT);
qdict = qobject_to_qdict(obj);
g_assert_cmpint(qdict_size(qdict), ==, 3);
g_assert_cmpint(qdict_get_int(qdict, "integer"), ==, 42);
g_assert_cmpint(qdict_get_bool(qdict, "boolean"), ==, false);
g_assert_cmpstr(qdict_get_str(qdict, "string"), ==, "foo");
}
static void test_visitor_out_struct_nested(TestOutputVisitorData *data,
const void *unused)
{
int64_t value = 42;
UserDefTwo *ud2;
QObject *obj;
QDict *qdict, *dict1, *dict2, *dict3, *userdef;
const char *string = "user def string";
const char *strings[] = { "forty two", "forty three", "forty four",
"forty five" };
ud2 = g_malloc0(sizeof(*ud2));
ud2->string0 = g_strdup(strings[0]);
qapi: Drop tests for inline nested structs A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument; but existing use of inline nested structs conflicts with that goal. More precisely, a definition in the QAPI schema associates a name with a set of properties: Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } } associates the global name 'Foo' with properties (meta-type struct) and MEMBERS... Example 2: 'mumble': TYPE within MEMBERS... above associates 'mumble' with properties (type TYPE) and (optional false) within type Foo The syntax of example 1 is extensible; if we need another property, we add another name/value pair to the dictionary (such as 'base':TYPE). The syntax of example 2 is not extensible, because the right hand side can only be a type. We have used name encoding to add a property: "'*mumble': 'int'" associates 'mumble' with (type int) and (optional true). Nice, but doesn't scale. So the solution is to change our existing uses to be syntactic sugar to an extensible form: NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false } *ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true } This patch fixes the testsuite to avoid inline nested types, by breaking the nesting into explicit types; it means that the type is now boxed instead of unboxed in C code, but makes no difference on the wire (and if desired, a later patch could change the generator to not do so much boxing in C). When touching code to add new allocations, also convert existing allocations to consistently prefer typesafe g_new0 over g_malloc0 when a type name is involved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-04 17:05:30 +02:00
ud2->dict1 = g_malloc0(sizeof(*ud2->dict1));
ud2->dict1->string1 = g_strdup(strings[1]);
ud2->dict1->dict2 = g_malloc0(sizeof(*ud2->dict1->dict2));
ud2->dict1->dict2->userdef = g_new0(UserDefOne, 1);
ud2->dict1->dict2->userdef->string = g_strdup(string);
qapi: Unbox base members Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:49 +01:00
ud2->dict1->dict2->userdef->integer = value;
qapi: Drop tests for inline nested structs A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument; but existing use of inline nested structs conflicts with that goal. More precisely, a definition in the QAPI schema associates a name with a set of properties: Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } } associates the global name 'Foo' with properties (meta-type struct) and MEMBERS... Example 2: 'mumble': TYPE within MEMBERS... above associates 'mumble' with properties (type TYPE) and (optional false) within type Foo The syntax of example 1 is extensible; if we need another property, we add another name/value pair to the dictionary (such as 'base':TYPE). The syntax of example 2 is not extensible, because the right hand side can only be a type. We have used name encoding to add a property: "'*mumble': 'int'" associates 'mumble' with (type int) and (optional true). Nice, but doesn't scale. So the solution is to change our existing uses to be syntactic sugar to an extensible form: NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false } *ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true } This patch fixes the testsuite to avoid inline nested types, by breaking the nesting into explicit types; it means that the type is now boxed instead of unboxed in C code, but makes no difference on the wire (and if desired, a later patch could change the generator to not do so much boxing in C). When touching code to add new allocations, also convert existing allocations to consistently prefer typesafe g_new0 over g_malloc0 when a type name is involved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-04 17:05:30 +02:00
ud2->dict1->dict2->string = g_strdup(strings[2]);
ud2->dict1->dict3 = g_malloc0(sizeof(*ud2->dict1->dict3));
ud2->dict1->has_dict3 = true;
ud2->dict1->dict3->userdef = g_new0(UserDefOne, 1);
ud2->dict1->dict3->userdef->string = g_strdup(string);
qapi: Unbox base members Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:49 +01:00
ud2->dict1->dict3->userdef->integer = value;
qapi: Drop tests for inline nested structs A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument; but existing use of inline nested structs conflicts with that goal. More precisely, a definition in the QAPI schema associates a name with a set of properties: Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } } associates the global name 'Foo' with properties (meta-type struct) and MEMBERS... Example 2: 'mumble': TYPE within MEMBERS... above associates 'mumble' with properties (type TYPE) and (optional false) within type Foo The syntax of example 1 is extensible; if we need another property, we add another name/value pair to the dictionary (such as 'base':TYPE). The syntax of example 2 is not extensible, because the right hand side can only be a type. We have used name encoding to add a property: "'*mumble': 'int'" associates 'mumble' with (type int) and (optional true). Nice, but doesn't scale. So the solution is to change our existing uses to be syntactic sugar to an extensible form: NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false } *ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true } This patch fixes the testsuite to avoid inline nested types, by breaking the nesting into explicit types; it means that the type is now boxed instead of unboxed in C code, but makes no difference on the wire (and if desired, a later patch could change the generator to not do so much boxing in C). When touching code to add new allocations, also convert existing allocations to consistently prefer typesafe g_new0 over g_malloc0 when a type name is involved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-04 17:05:30 +02:00
ud2->dict1->dict3->string = g_strdup(strings[3]);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefTwo(data->ov, "unused", &ud2, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QDICT);
qdict = qobject_to_qdict(obj);
g_assert_cmpint(qdict_size(qdict), ==, 2);
g_assert_cmpstr(qdict_get_str(qdict, "string0"), ==, strings[0]);
dict1 = qdict_get_qdict(qdict, "dict1");
g_assert_cmpint(qdict_size(dict1), ==, 3);
g_assert_cmpstr(qdict_get_str(dict1, "string1"), ==, strings[1]);
dict2 = qdict_get_qdict(dict1, "dict2");
g_assert_cmpint(qdict_size(dict2), ==, 2);
g_assert_cmpstr(qdict_get_str(dict2, "string"), ==, strings[2]);
userdef = qdict_get_qdict(dict2, "userdef");
g_assert_cmpint(qdict_size(userdef), ==, 2);
g_assert_cmpint(qdict_get_int(userdef, "integer"), ==, value);
g_assert_cmpstr(qdict_get_str(userdef, "string"), ==, string);
dict3 = qdict_get_qdict(dict1, "dict3");
g_assert_cmpint(qdict_size(dict3), ==, 2);
g_assert_cmpstr(qdict_get_str(dict3, "string"), ==, strings[3]);
userdef = qdict_get_qdict(dict3, "userdef");
g_assert_cmpint(qdict_size(userdef), ==, 2);
g_assert_cmpint(qdict_get_int(userdef, "integer"), ==, value);
g_assert_cmpstr(qdict_get_str(userdef, "string"), ==, string);
qapi_free_UserDefTwo(ud2);
}
static void test_visitor_out_struct_errors(TestOutputVisitorData *data,
const void *unused)
{
EnumOne bad_values[] = { ENUM_ONE__MAX, -1 };
qapi: Unbox base members Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:49 +01:00
UserDefOne u = {0};
UserDefOne *pu = &u;
Error *err;
int i;
for (i = 0; i < ARRAY_SIZE(bad_values) ; i++) {
err = NULL;
u.has_enum1 = true;
u.enum1 = bad_values[i];
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefOne(data->ov, "unused", &pu, &err);
g_assert(err);
error_free(err);
visitor_reset(data);
}
}
static void test_visitor_out_list(TestOutputVisitorData *data,
const void *unused)
{
const char *value_str = "list value";
TestStructList *p, *head = NULL;
const int max_items = 10;
bool value_bool = true;
int value_int = 10;
QListEntry *entry;
QObject *obj;
QList *qlist;
int i;
/* Build the list in reverse order... */
for (i = 0; i < max_items; i++) {
p = g_malloc0(sizeof(*p));
p->value = g_malloc0(sizeof(*p->value));
p->value->integer = value_int + (max_items - i - 1);
p->value->boolean = value_bool;
p->value->string = g_strdup(value_str);
p->next = head;
head = p;
}
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_TestStructList(data->ov, NULL, &head, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QLIST);
qlist = qobject_to_qlist(obj);
g_assert(!qlist_empty(qlist));
/* ...and ensure that the visitor sees it in order */
i = 0;
QLIST_FOREACH_ENTRY(qlist, entry) {
QDict *qdict;
g_assert(qobject_type(entry->value) == QTYPE_QDICT);
qdict = qobject_to_qdict(entry->value);
g_assert_cmpint(qdict_size(qdict), ==, 3);
g_assert_cmpint(qdict_get_int(qdict, "integer"), ==, value_int + i);
g_assert_cmpint(qdict_get_bool(qdict, "boolean"), ==, value_bool);
g_assert_cmpstr(qdict_get_str(qdict, "string"), ==, value_str);
i++;
}
g_assert_cmpint(i, ==, max_items);
qapi_free_TestStructList(head);
}
static void test_visitor_out_list_qapi_free(TestOutputVisitorData *data,
const void *unused)
{
UserDefTwoList *p, *head = NULL;
const char string[] = "foo bar";
int i, max_count = 1024;
for (i = 0; i < max_count; i++) {
p = g_malloc0(sizeof(*p));
p->value = g_malloc0(sizeof(*p->value));
p->value->string0 = g_strdup(string);
qapi: Drop tests for inline nested structs A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument; but existing use of inline nested structs conflicts with that goal. More precisely, a definition in the QAPI schema associates a name with a set of properties: Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } } associates the global name 'Foo' with properties (meta-type struct) and MEMBERS... Example 2: 'mumble': TYPE within MEMBERS... above associates 'mumble' with properties (type TYPE) and (optional false) within type Foo The syntax of example 1 is extensible; if we need another property, we add another name/value pair to the dictionary (such as 'base':TYPE). The syntax of example 2 is not extensible, because the right hand side can only be a type. We have used name encoding to add a property: "'*mumble': 'int'" associates 'mumble' with (type int) and (optional true). Nice, but doesn't scale. So the solution is to change our existing uses to be syntactic sugar to an extensible form: NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false } *ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true } This patch fixes the testsuite to avoid inline nested types, by breaking the nesting into explicit types; it means that the type is now boxed instead of unboxed in C code, but makes no difference on the wire (and if desired, a later patch could change the generator to not do so much boxing in C). When touching code to add new allocations, also convert existing allocations to consistently prefer typesafe g_new0 over g_malloc0 when a type name is involved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-04 17:05:30 +02:00
p->value->dict1 = g_new0(UserDefTwoDict, 1);
p->value->dict1->string1 = g_strdup(string);
p->value->dict1->dict2 = g_new0(UserDefTwoDictDict, 1);
p->value->dict1->dict2->userdef = g_new0(UserDefOne, 1);
p->value->dict1->dict2->userdef->string = g_strdup(string);
qapi: Unbox base members Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:49 +01:00
p->value->dict1->dict2->userdef->integer = 42;
qapi: Drop tests for inline nested structs A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument; but existing use of inline nested structs conflicts with that goal. More precisely, a definition in the QAPI schema associates a name with a set of properties: Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } } associates the global name 'Foo' with properties (meta-type struct) and MEMBERS... Example 2: 'mumble': TYPE within MEMBERS... above associates 'mumble' with properties (type TYPE) and (optional false) within type Foo The syntax of example 1 is extensible; if we need another property, we add another name/value pair to the dictionary (such as 'base':TYPE). The syntax of example 2 is not extensible, because the right hand side can only be a type. We have used name encoding to add a property: "'*mumble': 'int'" associates 'mumble' with (type int) and (optional true). Nice, but doesn't scale. So the solution is to change our existing uses to be syntactic sugar to an extensible form: NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false } *ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true } This patch fixes the testsuite to avoid inline nested types, by breaking the nesting into explicit types; it means that the type is now boxed instead of unboxed in C code, but makes no difference on the wire (and if desired, a later patch could change the generator to not do so much boxing in C). When touching code to add new allocations, also convert existing allocations to consistently prefer typesafe g_new0 over g_malloc0 when a type name is involved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-04 17:05:30 +02:00
p->value->dict1->dict2->string = g_strdup(string);
p->value->dict1->has_dict3 = false;
p->next = head;
head = p;
}
qapi_free_UserDefTwoList(head);
}
static void test_visitor_out_any(TestOutputVisitorData *data,
const void *unused)
{
QObject *qobj;
QInt *qint;
QBool *qbool;
QString *qstring;
QDict *qdict;
QObject *obj;
qobj = QOBJECT(qint_from_int(-42));
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_any(data->ov, NULL, &qobj, &error_abort);
obj = visitor_get(data);
g_assert(qobject_type(obj) == QTYPE_QINT);
g_assert_cmpint(qint_get_int(qobject_to_qint(obj)), ==, -42);
qobject_decref(qobj);
visitor_reset(data);
qdict = qdict_new();
qdict_put(qdict, "integer", qint_from_int(-42));
qdict_put(qdict, "boolean", qbool_from_bool(true));
qdict_put(qdict, "string", qstring_from_str("foo"));
qobj = QOBJECT(qdict);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_any(data->ov, NULL, &qobj, &error_abort);
qobject_decref(qobj);
obj = visitor_get(data);
qdict = qobject_to_qdict(obj);
g_assert(qdict);
qobj = qdict_get(qdict, "integer");
g_assert(qobj);
qint = qobject_to_qint(qobj);
g_assert(qint);
g_assert_cmpint(qint_get_int(qint), ==, -42);
qobj = qdict_get(qdict, "boolean");
g_assert(qobj);
qbool = qobject_to_qbool(qobj);
g_assert(qbool);
g_assert(qbool_get_bool(qbool) == true);
qobj = qdict_get(qdict, "string");
g_assert(qobj);
qstring = qobject_to_qstring(qobj);
g_assert(qstring);
g_assert_cmpstr(qstring_get_str(qstring), ==, "foo");
}
static void test_visitor_out_union_flat(TestOutputVisitorData *data,
const void *unused)
{
QObject *arg;
QDict *qdict;
UserDefFlatUnion *tmp = g_malloc0(sizeof(UserDefFlatUnion));
tmp->enum1 = ENUM_ONE_VALUE1;
tmp->string = g_strdup("str");
tmp->integer = 41;
qapi: Don't box branches of flat unions There's no reason to do two malloc's for a flat union; let's just inline the branch struct directly into the C union branch of the flat union. Surprisingly, fewer clients were actually using explicit references to the branch types in comparison to the number of flat unions thus modified. This lets us reduce the hack in qapi-types:gen_variants() added in the previous patch; we no longer need to distinguish between alternates and flat unions. The change to unboxed structs means that u.data (added in commit cee2dedb) is now coincident with random fields of each branch of the flat union, whereas beforehand it was only coincident with pointers (since all branches of a flat union have to be objects). Note that this was already the case for simple unions - but there we got lucky. Remember, visit_start_union() blindly returns true for all visitors except for the dealloc visitor, where it returns the value !!obj->u.data, and that this result then controls whether to proceed with the visit to the variant. Pre-patch, this meant that flat unions were testing whether the boxed pointer was still NULL, and thereby skipping visit_end_implicit_struct() and avoiding a NULL dereference if the pointer had not been allocated. The same was true for simple unions where the current branch had pointer type, except there we bypassed visit_type_FOO(). But for simple unions where the current branch had scalar type, the contents of that scalar meant that the decision to call visit_type_FOO() was data-dependent - the reason we got lucky there is that visit_type_FOO() for all scalar types in the dealloc visitor is a no-op (only the pointer variants had anything to free), so it did not matter whether the dealloc visit was skipped. But with this patch, we would risk leaking memory if we could skip a call to visit_type_FOO_fields() based solely on a data-dependent decision. But notice: in the dealloc visitor, visit_type_FOO() already handles a NULL obj - it was only the visit_type_implicit_FOO() that was failing to check for NULL. And now that we have refactored things to have the branch be part of the parent struct, we no longer have a separate pointer that can be NULL in the first place. So we can just delete the call to visit_start_union() altogether, and blindly visit the branch type; there is no change in behavior except to the dealloc visitor, where we now unconditionally visit the branch, but where that visit is now always safe (for a flat union, we can no longer dereference NULL, and for a simple union, visit_type_FOO() was already safely handling NULL on pointer types). Unfortunately, simple unions are not as easy to switch to unboxed layout; because we are special-casing the hidden implicit type with a single 'data' member, we really DO need to keep calling another layer of visit_start_struct(), with a second malloc; although there are some cleanups planned for simple unions in later patches. visit_start_union() and gen_visit_implicit_struct() are now unused. Drop them. Note that after this patch, the only remaining use of visit_start_implicit_struct() is for alternate types; the next patch will do further cleanup based on that fact. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1455778109-6278-14-git-send-email-eblake@redhat.com> [Dead code deletion squashed in, commit message updated accordingly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:27 +01:00
tmp->u.value1.boolean = true;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefFlatUnion(data->ov, NULL, &tmp, &error_abort);
arg = visitor_get(data);
g_assert(qobject_type(arg) == QTYPE_QDICT);
qdict = qobject_to_qdict(arg);
g_assert_cmpstr(qdict_get_str(qdict, "enum1"), ==, "value1");
g_assert_cmpstr(qdict_get_str(qdict, "string"), ==, "str");
g_assert_cmpint(qdict_get_int(qdict, "integer"), ==, 41);
g_assert_cmpint(qdict_get_bool(qdict, "boolean"), ==, true);
qapi_free_UserDefFlatUnion(tmp);
}
static void test_visitor_out_alternate(TestOutputVisitorData *data,
const void *unused)
{
QObject *arg;
UserDefAlternate *tmp;
QDict *qdict;
tmp = g_new0(UserDefAlternate, 1);
qapi: Simplify visiting of alternate types Previously, working with alternates required two lookup arrays and some indirection: for type Foo, we created Foo_qtypes[] which maps each qtype to a value of the generated FooKind enum, then look up that value in FooKind_lookup[] like we do for other union types. This has a couple of subtle bugs. First, the generator was creating a call with a parameter '(int *) &(*obj)->type' where type is an enum type; this is unsafe if the compiler chooses to store the enum type in a different size than int, where assigning through the wrong size pointer can corrupt data or cause a SIGBUS. Related bug, not not fixed in this patch: qapi-visit.py's gen_visit_enum() generates a cast of its enum * argument to int *. Marked FIXME. Second, since the values of the FooKind enum start at zero, all entries of the Foo_qtypes[] array that were not explicitly initialized will map to the same branch of the union as the first member of the alternate, rather than triggering a desired failure in visit_get_next_type(). Fortunately, the bug seldom bites; the very next thing the input visitor does is try to parse the incoming JSON with the wrong parser, which normally fails; the output visitor is not used with a C struct in that state, and the dealloc visitor has nothing to clean up (so there is no leak). However, the second bug IS observable in one case: parsing an integer causes unusual behavior in an alternate that contains at least a 'number' member but no 'int' member, because the 'number' parser accepts QTYPE_QINT in addition to the expected QTYPE_QFLOAT (that is, since 'int' is not a member, the type QTYPE_QINT accidentally maps to FooKind 0; if this enum value is the 'number' branch the integer parses successfully, but if the 'number' branch is not first, some other branch tries to parse the integer and rejects it). A later patch will worry about fixing alternates to always parse all inputs that a non-alternate 'number' would accept, for now this is still marked FIXME in the updated test-qmp-input-visitor.c, to merely point out that new undesired behavior of 'ans' matches the existing undesired behavior of 'asn'. This patch fixes the default-initialization bug by deleting the indirection, and modifying get_next_type() to directly assign a QTypeCode parameter. This in turn fixes the type-casting bug, as we are no longer casting a pointer to enum to a questionable size. There is no longer a need to generate an implicit FooKind enum associated with the alternate type (since the QMP wire format never uses the stringized counterparts of the C union member names). Since the updated visit_get_next_type() does not know which qtypes are expected, the generated visitor is modified to generate an error statement if an unexpected type is encountered. Callers now have to know the QTYPE_* mapping when looking at the discriminator; but so far, only the testsuite was even using the C struct of an alternate types. I considered the possibility of keeping the internal enum FooKind, but initialized differently than most generated arrays, as in: typedef enum FooKind { FOO_KIND_A = QTYPE_QDICT, FOO_KIND_B = QTYPE_QINT, } FooKind; to create nicer aliases for knowing when to use foo->a or foo->b when inspecting foo->type; but it turned out to add too much complexity, especially without a client. There is a user-visible side effect to this change, but I consider it to be an improvement. Previously, the invalid QMP command: {"execute":"blockdev-add", "arguments":{"options": {"driver":"raw", "id":"a", "file":true}}} failed with: {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'file', expected: QDict"}} (visit_get_next_type() succeeded, and the error comes from the visit_type_BlockdevOptions() expecting {}; there is no mention of the fact that a string would also work). Now it fails with: {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'file', expected: BlockdevRef"}} (the error when the next type doesn't match any expected types for the overall alternate). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:48 +01:00
tmp->type = QTYPE_QINT;
tmp->u.i = 42;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefAlternate(data->ov, NULL, &tmp, &error_abort);
arg = visitor_get(data);
g_assert(qobject_type(arg) == QTYPE_QINT);
g_assert_cmpint(qint_get_int(qobject_to_qint(arg)), ==, 42);
qapi_free_UserDefAlternate(tmp);
visitor_reset(data);
tmp = g_new0(UserDefAlternate, 1);
qapi: Simplify visiting of alternate types Previously, working with alternates required two lookup arrays and some indirection: for type Foo, we created Foo_qtypes[] which maps each qtype to a value of the generated FooKind enum, then look up that value in FooKind_lookup[] like we do for other union types. This has a couple of subtle bugs. First, the generator was creating a call with a parameter '(int *) &(*obj)->type' where type is an enum type; this is unsafe if the compiler chooses to store the enum type in a different size than int, where assigning through the wrong size pointer can corrupt data or cause a SIGBUS. Related bug, not not fixed in this patch: qapi-visit.py's gen_visit_enum() generates a cast of its enum * argument to int *. Marked FIXME. Second, since the values of the FooKind enum start at zero, all entries of the Foo_qtypes[] array that were not explicitly initialized will map to the same branch of the union as the first member of the alternate, rather than triggering a desired failure in visit_get_next_type(). Fortunately, the bug seldom bites; the very next thing the input visitor does is try to parse the incoming JSON with the wrong parser, which normally fails; the output visitor is not used with a C struct in that state, and the dealloc visitor has nothing to clean up (so there is no leak). However, the second bug IS observable in one case: parsing an integer causes unusual behavior in an alternate that contains at least a 'number' member but no 'int' member, because the 'number' parser accepts QTYPE_QINT in addition to the expected QTYPE_QFLOAT (that is, since 'int' is not a member, the type QTYPE_QINT accidentally maps to FooKind 0; if this enum value is the 'number' branch the integer parses successfully, but if the 'number' branch is not first, some other branch tries to parse the integer and rejects it). A later patch will worry about fixing alternates to always parse all inputs that a non-alternate 'number' would accept, for now this is still marked FIXME in the updated test-qmp-input-visitor.c, to merely point out that new undesired behavior of 'ans' matches the existing undesired behavior of 'asn'. This patch fixes the default-initialization bug by deleting the indirection, and modifying get_next_type() to directly assign a QTypeCode parameter. This in turn fixes the type-casting bug, as we are no longer casting a pointer to enum to a questionable size. There is no longer a need to generate an implicit FooKind enum associated with the alternate type (since the QMP wire format never uses the stringized counterparts of the C union member names). Since the updated visit_get_next_type() does not know which qtypes are expected, the generated visitor is modified to generate an error statement if an unexpected type is encountered. Callers now have to know the QTYPE_* mapping when looking at the discriminator; but so far, only the testsuite was even using the C struct of an alternate types. I considered the possibility of keeping the internal enum FooKind, but initialized differently than most generated arrays, as in: typedef enum FooKind { FOO_KIND_A = QTYPE_QDICT, FOO_KIND_B = QTYPE_QINT, } FooKind; to create nicer aliases for knowing when to use foo->a or foo->b when inspecting foo->type; but it turned out to add too much complexity, especially without a client. There is a user-visible side effect to this change, but I consider it to be an improvement. Previously, the invalid QMP command: {"execute":"blockdev-add", "arguments":{"options": {"driver":"raw", "id":"a", "file":true}}} failed with: {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'file', expected: QDict"}} (visit_get_next_type() succeeded, and the error comes from the visit_type_BlockdevOptions() expecting {}; there is no mention of the fact that a string would also work). Now it fails with: {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'file', expected: BlockdevRef"}} (the error when the next type doesn't match any expected types for the overall alternate). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:48 +01:00
tmp->type = QTYPE_QSTRING;
tmp->u.s = g_strdup("hello");
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefAlternate(data->ov, NULL, &tmp, &error_abort);
arg = visitor_get(data);
g_assert(qobject_type(arg) == QTYPE_QSTRING);
g_assert_cmpstr(qstring_get_str(qobject_to_qstring(arg)), ==, "hello");
qapi_free_UserDefAlternate(tmp);
visitor_reset(data);
tmp = g_new0(UserDefAlternate, 1);
tmp->type = QTYPE_QDICT;
qapi: Don't box struct branch of alternate There's no reason to do two malloc's for an alternate type visiting a QAPI struct; let's just inline the struct directly as the C union branch of the struct. Surprisingly, no clients were actually using the struct member prior to this patch outside of the testsuite; an earlier patch in the series added some testsuite coverage to make the effect of this patch more obvious. In qapi.py, c_type() gains a new is_unboxed flag to control when we are emitting a C struct unboxed within the context of an outer struct (different from our other two modes of usage with no flags for normal local variable declarations, and with is_param for adding 'const' in a parameter list). I don't know if there is any more pythonic way of collapsing the two flags into a single parameter, as we never have a caller setting both flags at once. Ultimately, we want to also unbox branches for QAPI unions, but as that touches a lot more client code, it is better as separate patches. But since unions and alternates share gen_variants(), I had to hack in a way to test if we are visiting an alternate type for setting the is_unboxed flag: look for a non-object branch. This works because alternates have at least two branches, with at most one object branch, while unions have only object branches. The hack will go away in a later patch. The generated code difference to qapi-types.h is relatively small: | struct BlockdevRef { | QType type; | union { /* union tag is @type */ | void *data; |- BlockdevOptions *definition; |+ BlockdevOptions definition; | char *reference; | } u; | }; The corresponding spot in qapi-visit.c calls visit_type_FOO(), which first calls visit_start_struct() to allocate or deallocate the member and handle a layer of {} from the JSON stream, then visits the members. To peel off the indirection and the memory management that comes with it, we inline this call, then suppress allocation / deallocation by passing NULL to visit_start_struct(), and adjust the member visit: | switch ((*obj)->type) { | case QTYPE_QDICT: |- visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err); |+ visit_start_struct(v, name, NULL, 0, &err); |+ if (err) { |+ break; |+ } |+ visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err); |+ error_propagate(errp, err); |+ err = NULL; |+ visit_end_struct(v, &err); | break; | case QTYPE_QSTRING: | visit_type_str(v, name, &(*obj)->u.reference, &err); The visit of non-object fields is unchanged. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1455778109-6278-13-git-send-email-eblake@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:26 +01:00
tmp->u.udfu.integer = 1;
tmp->u.udfu.string = g_strdup("str");
tmp->u.udfu.enum1 = ENUM_ONE_VALUE1;
qapi: Don't box branches of flat unions There's no reason to do two malloc's for a flat union; let's just inline the branch struct directly into the C union branch of the flat union. Surprisingly, fewer clients were actually using explicit references to the branch types in comparison to the number of flat unions thus modified. This lets us reduce the hack in qapi-types:gen_variants() added in the previous patch; we no longer need to distinguish between alternates and flat unions. The change to unboxed structs means that u.data (added in commit cee2dedb) is now coincident with random fields of each branch of the flat union, whereas beforehand it was only coincident with pointers (since all branches of a flat union have to be objects). Note that this was already the case for simple unions - but there we got lucky. Remember, visit_start_union() blindly returns true for all visitors except for the dealloc visitor, where it returns the value !!obj->u.data, and that this result then controls whether to proceed with the visit to the variant. Pre-patch, this meant that flat unions were testing whether the boxed pointer was still NULL, and thereby skipping visit_end_implicit_struct() and avoiding a NULL dereference if the pointer had not been allocated. The same was true for simple unions where the current branch had pointer type, except there we bypassed visit_type_FOO(). But for simple unions where the current branch had scalar type, the contents of that scalar meant that the decision to call visit_type_FOO() was data-dependent - the reason we got lucky there is that visit_type_FOO() for all scalar types in the dealloc visitor is a no-op (only the pointer variants had anything to free), so it did not matter whether the dealloc visit was skipped. But with this patch, we would risk leaking memory if we could skip a call to visit_type_FOO_fields() based solely on a data-dependent decision. But notice: in the dealloc visitor, visit_type_FOO() already handles a NULL obj - it was only the visit_type_implicit_FOO() that was failing to check for NULL. And now that we have refactored things to have the branch be part of the parent struct, we no longer have a separate pointer that can be NULL in the first place. So we can just delete the call to visit_start_union() altogether, and blindly visit the branch type; there is no change in behavior except to the dealloc visitor, where we now unconditionally visit the branch, but where that visit is now always safe (for a flat union, we can no longer dereference NULL, and for a simple union, visit_type_FOO() was already safely handling NULL on pointer types). Unfortunately, simple unions are not as easy to switch to unboxed layout; because we are special-casing the hidden implicit type with a single 'data' member, we really DO need to keep calling another layer of visit_start_struct(), with a second malloc; although there are some cleanups planned for simple unions in later patches. visit_start_union() and gen_visit_implicit_struct() are now unused. Drop them. Note that after this patch, the only remaining use of visit_start_implicit_struct() is for alternate types; the next patch will do further cleanup based on that fact. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1455778109-6278-14-git-send-email-eblake@redhat.com> [Dead code deletion squashed in, commit message updated accordingly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:27 +01:00
tmp->u.udfu.u.value1.boolean = true;
visit_type_UserDefAlternate(data->ov, NULL, &tmp, &error_abort);
arg = visitor_get(data);
g_assert_cmpint(qobject_type(arg), ==, QTYPE_QDICT);
qdict = qobject_to_qdict(arg);
g_assert_cmpint(qdict_size(qdict), ==, 4);
g_assert_cmpint(qdict_get_int(qdict, "integer"), ==, 1);
g_assert_cmpstr(qdict_get_str(qdict, "string"), ==, "str");
g_assert_cmpstr(qdict_get_str(qdict, "enum1"), ==, "value1");
g_assert_cmpint(qdict_get_bool(qdict, "boolean"), ==, true);
qapi_free_UserDefAlternate(tmp);
}
static void test_visitor_out_null(TestOutputVisitorData *data,
const void *unused)
{
QObject *arg;
QDict *qdict;
QObject *nil;
visit_start_struct(data->ov, NULL, NULL, 0, &error_abort);
visit_type_null(data->ov, "a", &error_abort);
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:27 +02:00
visit_check_struct(data->ov, &error_abort);
2016-06-09 18:48:34 +02:00
visit_end_struct(data->ov, NULL);
arg = visitor_get(data);
g_assert(qobject_type(arg) == QTYPE_QDICT);
qdict = qobject_to_qdict(arg);
g_assert_cmpint(qdict_size(qdict), ==, 1);
nil = qdict_get(qdict, "a");
g_assert(nil);
g_assert(qobject_type(nil) == QTYPE_QNULL);
}
static void init_native_list(UserDefNativeListUnion *cvalue)
{
int i;
switch (cvalue->type) {
case USER_DEF_NATIVE_LIST_UNION_KIND_INTEGER: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
intList **list = &cvalue->u.integer.data;
for (i = 0; i < 32; i++) {
*list = g_new0(intList, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_S8: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
int8List **list = &cvalue->u.s8.data;
for (i = 0; i < 32; i++) {
*list = g_new0(int8List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_S16: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
int16List **list = &cvalue->u.s16.data;
for (i = 0; i < 32; i++) {
*list = g_new0(int16List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_S32: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
int32List **list = &cvalue->u.s32.data;
for (i = 0; i < 32; i++) {
*list = g_new0(int32List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_S64: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
int64List **list = &cvalue->u.s64.data;
for (i = 0; i < 32; i++) {
*list = g_new0(int64List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_U8: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
uint8List **list = &cvalue->u.u8.data;
for (i = 0; i < 32; i++) {
*list = g_new0(uint8List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_U16: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
uint16List **list = &cvalue->u.u16.data;
for (i = 0; i < 32; i++) {
*list = g_new0(uint16List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_U32: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
uint32List **list = &cvalue->u.u32.data;
for (i = 0; i < 32; i++) {
*list = g_new0(uint32List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_U64: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
uint64List **list = &cvalue->u.u64.data;
for (i = 0; i < 32; i++) {
*list = g_new0(uint64List, 1);
(*list)->value = i;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_BOOLEAN: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
boolList **list = &cvalue->u.boolean.data;
for (i = 0; i < 32; i++) {
*list = g_new0(boolList, 1);
(*list)->value = (i % 3 == 0);
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_STRING: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
strList **list = &cvalue->u.string.data;
for (i = 0; i < 32; i++) {
*list = g_new0(strList, 1);
(*list)->value = g_strdup_printf("%d", i);
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
case USER_DEF_NATIVE_LIST_UNION_KIND_NUMBER: {
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
numberList **list = &cvalue->u.number.data;
for (i = 0; i < 32; i++) {
*list = g_new0(numberList, 1);
(*list)->value = (double)i / 3;
(*list)->next = NULL;
list = &(*list)->next;
}
break;
}
default:
g_assert_not_reached();
}
}
static void check_native_list(QObject *qobj,
UserDefNativeListUnionKind kind)
{
QDict *qdict;
QList *qlist;
int i;
g_assert(qobj);
g_assert(qobject_type(qobj) == QTYPE_QDICT);
qdict = qobject_to_qdict(qobj);
g_assert(qdict);
g_assert(qdict_haskey(qdict, "data"));
qlist = qlist_copy(qobject_to_qlist(qdict_get(qdict, "data")));
switch (kind) {
case USER_DEF_NATIVE_LIST_UNION_KIND_S8:
case USER_DEF_NATIVE_LIST_UNION_KIND_S16:
case USER_DEF_NATIVE_LIST_UNION_KIND_S32:
case USER_DEF_NATIVE_LIST_UNION_KIND_S64:
case USER_DEF_NATIVE_LIST_UNION_KIND_U8:
case USER_DEF_NATIVE_LIST_UNION_KIND_U16:
case USER_DEF_NATIVE_LIST_UNION_KIND_U32:
case USER_DEF_NATIVE_LIST_UNION_KIND_U64:
/* all integer elements in JSON arrays get stored into QInts when
* we convert to QObjects, so we can check them all in the same
* fashion, so simply fall through here
*/
case USER_DEF_NATIVE_LIST_UNION_KIND_INTEGER:
for (i = 0; i < 32; i++) {
QObject *tmp;
QInt *qvalue;
tmp = qlist_peek(qlist);
g_assert(tmp);
qvalue = qobject_to_qint(tmp);
g_assert_cmpint(qint_get_int(qvalue), ==, i);
qobject_decref(qlist_pop(qlist));
}
break;
case USER_DEF_NATIVE_LIST_UNION_KIND_BOOLEAN:
for (i = 0; i < 32; i++) {
QObject *tmp;
QBool *qvalue;
tmp = qlist_peek(qlist);
g_assert(tmp);
qvalue = qobject_to_qbool(tmp);
g_assert_cmpint(qbool_get_bool(qvalue), ==, i % 3 == 0);
qobject_decref(qlist_pop(qlist));
}
break;
case USER_DEF_NATIVE_LIST_UNION_KIND_STRING:
for (i = 0; i < 32; i++) {
QObject *tmp;
QString *qvalue;
gchar str[8];
tmp = qlist_peek(qlist);
g_assert(tmp);
qvalue = qobject_to_qstring(tmp);
sprintf(str, "%d", i);
g_assert_cmpstr(qstring_get_str(qvalue), ==, str);
qobject_decref(qlist_pop(qlist));
}
break;
case USER_DEF_NATIVE_LIST_UNION_KIND_NUMBER:
for (i = 0; i < 32; i++) {
QObject *tmp;
QFloat *qvalue;
GString *double_expected = g_string_new("");
GString *double_actual = g_string_new("");
tmp = qlist_peek(qlist);
g_assert(tmp);
qvalue = qobject_to_qfloat(tmp);
g_string_printf(double_expected, "%.6f", (double)i / 3);
g_string_printf(double_actual, "%.6f", qfloat_get_double(qvalue));
g_assert_cmpstr(double_actual->str, ==, double_expected->str);
qobject_decref(qlist_pop(qlist));
g_string_free(double_expected, true);
g_string_free(double_actual, true);
}
break;
default:
g_assert_not_reached();
}
QDECREF(qlist);
}
static void test_native_list(TestOutputVisitorData *data,
const void *unused,
UserDefNativeListUnionKind kind)
{
UserDefNativeListUnion *cvalue = g_new0(UserDefNativeListUnion, 1);
QObject *obj;
cvalue->type = kind;
init_native_list(cvalue);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_UserDefNativeListUnion(data->ov, NULL, &cvalue, &error_abort);
obj = visitor_get(data);
check_native_list(obj, cvalue->type);
qapi_free_UserDefNativeListUnion(cvalue);
}
static void test_visitor_out_native_list_int(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_INTEGER);
}
static void test_visitor_out_native_list_int8(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_S8);
}
static void test_visitor_out_native_list_int16(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_S16);
}
static void test_visitor_out_native_list_int32(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_S32);
}
static void test_visitor_out_native_list_int64(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_S64);
}
static void test_visitor_out_native_list_uint8(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_U8);
}
static void test_visitor_out_native_list_uint16(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_U16);
}
static void test_visitor_out_native_list_uint32(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_U32);
}
static void test_visitor_out_native_list_uint64(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_U64);
}
static void test_visitor_out_native_list_bool(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_BOOLEAN);
}
static void test_visitor_out_native_list_str(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_STRING);
}
static void test_visitor_out_native_list_number(TestOutputVisitorData *data,
const void *unused)
{
test_native_list(data, unused, USER_DEF_NATIVE_LIST_UNION_KIND_NUMBER);
}
static void output_visitor_test_add(const char *testpath,
TestOutputVisitorData *data,
void (*test_func)(TestOutputVisitorData *data, const void *user_data))
{
g_test_add(testpath, TestOutputVisitorData, data, visitor_output_setup,
test_func, visitor_output_teardown);
}
int main(int argc, char **argv)
{
TestOutputVisitorData out_visitor_data;
g_test_init(&argc, &argv, NULL);
output_visitor_test_add("/visitor/output/int",
&out_visitor_data, test_visitor_out_int);
output_visitor_test_add("/visitor/output/bool",
&out_visitor_data, test_visitor_out_bool);
output_visitor_test_add("/visitor/output/number",
&out_visitor_data, test_visitor_out_number);
output_visitor_test_add("/visitor/output/string",
&out_visitor_data, test_visitor_out_string);
output_visitor_test_add("/visitor/output/no-string",
&out_visitor_data, test_visitor_out_no_string);
output_visitor_test_add("/visitor/output/enum",
&out_visitor_data, test_visitor_out_enum);
output_visitor_test_add("/visitor/output/enum-errors",
&out_visitor_data, test_visitor_out_enum_errors);
output_visitor_test_add("/visitor/output/struct",
&out_visitor_data, test_visitor_out_struct);
output_visitor_test_add("/visitor/output/struct-nested",
&out_visitor_data, test_visitor_out_struct_nested);
output_visitor_test_add("/visitor/output/struct-errors",
&out_visitor_data, test_visitor_out_struct_errors);
output_visitor_test_add("/visitor/output/list",
&out_visitor_data, test_visitor_out_list);
output_visitor_test_add("/visitor/output/any",
&out_visitor_data, test_visitor_out_any);
output_visitor_test_add("/visitor/output/list-qapi-free",
&out_visitor_data, test_visitor_out_list_qapi_free);
output_visitor_test_add("/visitor/output/union-flat",
&out_visitor_data, test_visitor_out_union_flat);
output_visitor_test_add("/visitor/output/alternate",
&out_visitor_data, test_visitor_out_alternate);
output_visitor_test_add("/visitor/output/null",
&out_visitor_data, test_visitor_out_null);
output_visitor_test_add("/visitor/output/native_list/int",
&out_visitor_data,
test_visitor_out_native_list_int);
output_visitor_test_add("/visitor/output/native_list/int8",
&out_visitor_data,
test_visitor_out_native_list_int8);
output_visitor_test_add("/visitor/output/native_list/int16",
&out_visitor_data,
test_visitor_out_native_list_int16);
output_visitor_test_add("/visitor/output/native_list/int32",
&out_visitor_data,
test_visitor_out_native_list_int32);
output_visitor_test_add("/visitor/output/native_list/int64",
&out_visitor_data,
test_visitor_out_native_list_int64);
output_visitor_test_add("/visitor/output/native_list/uint8",
&out_visitor_data,
test_visitor_out_native_list_uint8);
output_visitor_test_add("/visitor/output/native_list/uint16",
&out_visitor_data,
test_visitor_out_native_list_uint16);
output_visitor_test_add("/visitor/output/native_list/uint32",
&out_visitor_data,
test_visitor_out_native_list_uint32);
output_visitor_test_add("/visitor/output/native_list/uint64",
&out_visitor_data,
test_visitor_out_native_list_uint64);
output_visitor_test_add("/visitor/output/native_list/bool",
&out_visitor_data,
test_visitor_out_native_list_bool);
output_visitor_test_add("/visitor/output/native_list/string",
&out_visitor_data,
test_visitor_out_native_list_str);
output_visitor_test_add("/visitor/output/native_list/number",
&out_visitor_data,
test_visitor_out_native_list_number);
g_test_run();
return 0;
}