2011-07-19 21:50:41 +02:00
|
|
|
#
|
|
|
|
# QAPI visitor generator
|
|
|
|
#
|
|
|
|
# Copyright IBM, Corp. 2011
|
qapi: Track all failures between visit_start/stop
Inside the generated code between visit_start_struct() and
visit_end_struct(), we were blindly setting the error into
the caller's errp parameter. But a future patch to split
visit_end_struct() will require that we take action based
on whether an error has occurred, which requires us to track
all actions through a local err. Rewrite the visits to be
more in line with the other generated calls.
Generated code changes look like:
| visit_start_struct(v, (void **)obj, "Abort", name, sizeof(Abort), &err);
|- if (!err) {
|- if (*obj) {
|- visit_type_Abort_fields(v, obj, errp);
|- }
|- visit_end_struct(v, &err);
|+ if (err) {
|+ goto out;
| }
|+ if (!*obj) {
|+ goto out_obj;
|+ }
|+ visit_type_Abort_fields(v, obj, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+out_obj:
|+ visit_end_struct(v, &err);
|+out:
| error_propagate(errp, err);
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-12-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:47 +01:00
|
|
|
# Copyright (C) 2014-2016 Red Hat, Inc.
|
2011-07-19 21:50:41 +02:00
|
|
|
#
|
|
|
|
# Authors:
|
|
|
|
# Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
# Michael Roth <mdroth@linux.vnet.ibm.com>
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
# Markus Armbruster <armbru@redhat.com>
|
2011-07-19 21:50:41 +02:00
|
|
|
#
|
2014-03-01 08:40:34 +01:00
|
|
|
# This work is licensed under the terms of the GNU GPL, version 2.
|
|
|
|
# See the COPYING file in the top-level directory.
|
2011-07-19 21:50:41 +02:00
|
|
|
|
|
|
|
from qapi import *
|
|
|
|
|
2015-09-16 13:06:16 +02:00
|
|
|
|
2015-09-16 13:06:17 +02:00
|
|
|
def gen_visit_decl(name, scalar=False):
|
|
|
|
c_type = c_name(name) + ' *'
|
|
|
|
if not scalar:
|
|
|
|
c_type += '*'
|
|
|
|
return mcgen('''
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_type)sobj, Error **errp);
|
2015-09-16 13:06:17 +02:00
|
|
|
''',
|
|
|
|
c_name=c_name(name), c_type=c_type)
|
|
|
|
|
|
|
|
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
def gen_visit_members_decl(name):
|
2016-02-18 07:48:25 +01:00
|
|
|
return mcgen('''
|
2015-06-26 10:19:11 +02:00
|
|
|
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
void visit_type_%(c_name)s_members(Visitor *v, %(c_name)s *obj, Error **errp);
|
2015-06-26 10:19:11 +02:00
|
|
|
''',
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
c_name=c_name(name))
|
2015-10-26 23:34:46 +01:00
|
|
|
|
|
|
|
|
2016-03-03 17:16:43 +01:00
|
|
|
def gen_visit_object_members(name, base, members, variants):
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
ret = mcgen('''
|
2013-07-03 15:58:57 +02:00
|
|
|
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
void visit_type_%(c_name)s_members(Visitor *v, %(c_name)s *obj, Error **errp)
|
2013-07-03 15:58:57 +02:00
|
|
|
{
|
|
|
|
Error *err = NULL;
|
2015-07-01 16:55:15 +02:00
|
|
|
|
2013-07-03 15:58:57 +02:00
|
|
|
''',
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
c_name=c_name(name))
|
2012-07-17 16:17:04 +02:00
|
|
|
|
2013-09-19 11:56:36 +02:00
|
|
|
if base:
|
|
|
|
ret += mcgen('''
|
2016-03-03 17:16:44 +01:00
|
|
|
visit_type_%(c_type)s_members(v, (%(c_type)s *)obj, &err);
|
2016-07-14 05:50:17 +02:00
|
|
|
if (err) {
|
|
|
|
goto out;
|
|
|
|
}
|
2013-09-19 11:56:36 +02:00
|
|
|
''',
|
qapi: Unbox base members
Rather than storing a base class as a pointer to a box, just
store the fields of that base class in the same order, so that
a child struct can be directly cast to its parent. This gives
less malloc overhead, less pointer dereferencing, and even less
generated code. Compare to the earlier commit 1e6c1616a "qapi:
Generate a nicer struct for flat unions" (although that patch
had fewer places to change, as less of qemu was directly using
qapi structs for flat unions). It also allows us to turn on
automatic type-safe wrappers for upcasting to the base class
of a struct.
Changes to the generated code look like this in qapi-types.h:
| struct SpiceChannel {
|- SpiceBasicInfo *base;
|+ /* Members inherited from SpiceBasicInfo: */
|+ char *host;
|+ char *port;
|+ NetworkAddressFamily family;
|+ /* Own members: */
| int64_t connection_id;
as well as additional upcast functions like qapi_SpiceChannel_base().
Meanwhile, changes to qapi-visit.c look like:
| static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err);
|+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err);
| if (err) {
(the cast is necessary, since our upcast wrappers only deal with a
single pointer, not pointer-to-pointer); plus the wholesale
elimination of some now-unused visit_type_implicit_FOO() functions.
Without boxing, the corner case of one empty struct having
another empty struct as its base type now requires inserting a
dummy member (previously, the 'Base *base' member sufficed).
And now that we no longer consume a 'base' member in the generated
C struct, we can delete the former negative struct-base-clash-base
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:49 +01:00
|
|
|
c_type=base.c_name())
|
2013-09-19 11:56:36 +02:00
|
|
|
|
2016-03-17 23:48:35 +01:00
|
|
|
for memb in members:
|
|
|
|
if memb.optional:
|
|
|
|
ret += mcgen('''
|
|
|
|
if (visit_optional(v, "%(name)s", &obj->has_%(c_name)s)) {
|
|
|
|
''',
|
|
|
|
name=memb.name, c_name=c_name(memb.name))
|
|
|
|
push_indent()
|
|
|
|
ret += mcgen('''
|
|
|
|
visit_type_%(c_type)s(v, "%(name)s", &obj->%(c_name)s, &err);
|
2016-07-14 05:50:17 +02:00
|
|
|
if (err) {
|
|
|
|
goto out;
|
|
|
|
}
|
2016-03-17 23:48:35 +01:00
|
|
|
''',
|
|
|
|
c_type=memb.type.c_name(), name=memb.name,
|
|
|
|
c_name=c_name(memb.name))
|
|
|
|
if memb.optional:
|
|
|
|
pop_indent()
|
|
|
|
ret += mcgen('''
|
|
|
|
}
|
|
|
|
''')
|
2012-07-17 16:17:04 +02:00
|
|
|
|
2016-02-18 07:48:20 +01:00
|
|
|
if variants:
|
|
|
|
ret += mcgen('''
|
qapi-visit: Less indirection in visit_type_Foo_fields()
We were passing 'Foo **obj' to the internal helper function, but
all uses within the helper were via reads of '*obj'. Refactor
things to pass one less level of indirection, by having the
callers dereference before calling.
For an example of the generated code change:
|-static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo **obj, Error **errp)
|+static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo *obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_int(v, "actual", &(*obj)->actual, &err);
|+ visit_type_int(v, "actual", &obj->actual, &err);
| error_propagate(errp, err);
| }
|
|@@ -261,7 +261,7 @@ void visit_type_BalloonInfo(Visitor *v,
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_BalloonInfo_fields(v, obj, &err);
|+ visit_type_BalloonInfo_fields(v, *obj, &err);
| out_obj:
The refactoring will also make it easier to reuse the helpers in
a future patch when implicit structs are stored directly in the
parent struct rather than boxed through a pointer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:22 +01:00
|
|
|
switch (obj->%(c_name)s) {
|
2016-02-18 07:48:20 +01:00
|
|
|
''',
|
|
|
|
c_name=c_name(variants.tag_member.name))
|
|
|
|
|
|
|
|
for var in variants.variants:
|
|
|
|
ret += mcgen('''
|
|
|
|
case %(case)s:
|
qapi: Don't special-case simple union wrappers
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
|
|
|
visit_type_%(c_type)s_members(v, &obj->u.%(c_name)s, &err);
|
|
|
|
break;
|
2016-02-18 07:48:20 +01:00
|
|
|
''',
|
|
|
|
case=c_enum_const(variants.tag_member.type.name,
|
|
|
|
var.name,
|
qapi: Don't special-case simple union wrappers
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
|
|
|
variants.tag_member.type.prefix),
|
|
|
|
c_type=var.type.c_name(), c_name=c_name(var.name))
|
2016-02-18 07:48:20 +01:00
|
|
|
|
|
|
|
ret += mcgen('''
|
|
|
|
default:
|
|
|
|
abort();
|
|
|
|
}
|
|
|
|
''')
|
|
|
|
|
2016-03-17 23:48:35 +01:00
|
|
|
# 'goto out' produced for base, for each member, and if variants were
|
|
|
|
# present
|
2016-02-18 07:48:20 +01:00
|
|
|
if base or members or variants:
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
ret += mcgen('''
|
2013-07-03 15:58:57 +02:00
|
|
|
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
out:
|
|
|
|
''')
|
|
|
|
ret += mcgen('''
|
2013-07-03 15:58:57 +02:00
|
|
|
error_propagate(errp, err);
|
|
|
|
}
|
|
|
|
''')
|
2013-07-02 16:18:35 +02:00
|
|
|
return ret
|
|
|
|
|
|
|
|
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
def gen_visit_list(name, element_type):
|
2011-07-19 21:50:41 +02:00
|
|
|
return mcgen('''
|
|
|
|
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s **obj, Error **errp)
|
2011-07-19 21:50:41 +02:00
|
|
|
{
|
2012-07-17 16:17:04 +02:00
|
|
|
Error *err = NULL;
|
qapi: Simplify semantics of visit_next_list()
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:31 +02:00
|
|
|
%(c_name)s *tail;
|
|
|
|
size_t size = sizeof(**obj);
|
2011-07-19 21:50:41 +02:00
|
|
|
|
qapi: Simplify semantics of visit_next_list()
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:31 +02:00
|
|
|
visit_start_list(v, name, (GenericList **)obj, size, &err);
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
if (err) {
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
qapi: Simplify semantics of visit_next_list()
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:31 +02:00
|
|
|
for (tail = *obj; tail;
|
|
|
|
tail = (%(c_name)s *)visit_next_list(v, (GenericList *)tail, size)) {
|
|
|
|
visit_type_%(c_elt_type)s(v, NULL, &tail->value, &err);
|
|
|
|
if (err) {
|
|
|
|
break;
|
|
|
|
}
|
2011-07-19 21:50:41 +02:00
|
|
|
}
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
|
2017-03-03 13:32:45 +01:00
|
|
|
if (!err) {
|
|
|
|
visit_check_list(v, &err);
|
|
|
|
}
|
qapi: Add parameter to visit_end_*
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:34 +02:00
|
|
|
visit_end_list(v, (void **)obj);
|
2016-04-28 23:45:32 +02:00
|
|
|
if (err && visit_is_input(v)) {
|
|
|
|
qapi_free_%(c_name)s(*obj);
|
|
|
|
*obj = NULL;
|
|
|
|
}
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
out:
|
|
|
|
error_propagate(errp, err);
|
2011-07-19 21:50:41 +02:00
|
|
|
}
|
|
|
|
''',
|
2015-09-16 13:06:16 +02:00
|
|
|
c_name=c_name(name), c_elt_type=element_type.c_name())
|
2011-07-19 21:50:41 +02:00
|
|
|
|
2015-09-16 13:06:16 +02:00
|
|
|
|
|
|
|
def gen_visit_enum(name):
|
2011-07-19 21:50:41 +02:00
|
|
|
return mcgen('''
|
|
|
|
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s *obj, Error **errp)
|
2011-07-19 21:50:41 +02:00
|
|
|
{
|
qapi: Don't cast Enum* to int*
C compilers are allowed to represent enums as a smaller type
than int, if all enum values fit in the smaller type. There
are even compiler flags that force the use of this smaller
representation, although using them changes the ABI of a
binary. Therefore, our generated code for visit_type_ENUM()
(for all qapi enums) was wrong for casting Enum* to int* when
calling visit_type_enum().
It appears that no one has been using compiler ABI switches
for qemu, because if they had, we are potentially dereferencing
beyond bounds or even risking a SIGBUS on platforms where
unaligned pointer dereferencing is fatal. But it is still
better to avoid the practice entirely, and just use the correct
types.
This matches the fix for alternate qapi types, done earlier in
commit 0426d53 "qapi: Simplify visiting of alternate types",
with generated code changing as:
| void visit_type_QType(Visitor *v, QType *obj, const char *name, Error **errp)
| {
|- visit_type_enum(v, (int *)obj, QType_lookup, "QType", name, errp);
|+ int value = *obj;
|+ visit_type_enum(v, &value, QType_lookup, "QType", name, errp);
|+ *obj = value;
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:52 +01:00
|
|
|
int value = *obj;
|
2016-01-29 14:48:57 +01:00
|
|
|
visit_type_enum(v, name, &value, %(c_name)s_lookup, errp);
|
qapi: Don't cast Enum* to int*
C compilers are allowed to represent enums as a smaller type
than int, if all enum values fit in the smaller type. There
are even compiler flags that force the use of this smaller
representation, although using them changes the ABI of a
binary. Therefore, our generated code for visit_type_ENUM()
(for all qapi enums) was wrong for casting Enum* to int* when
calling visit_type_enum().
It appears that no one has been using compiler ABI switches
for qemu, because if they had, we are potentially dereferencing
beyond bounds or even risking a SIGBUS on platforms where
unaligned pointer dereferencing is fatal. But it is still
better to avoid the practice entirely, and just use the correct
types.
This matches the fix for alternate qapi types, done earlier in
commit 0426d53 "qapi: Simplify visiting of alternate types",
with generated code changing as:
| void visit_type_QType(Visitor *v, QType *obj, const char *name, Error **errp)
| {
|- visit_type_enum(v, (int *)obj, QType_lookup, "QType", name, errp);
|+ int value = *obj;
|+ visit_type_enum(v, &value, QType_lookup, "QType", name, errp);
|+ *obj = value;
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:52 +01:00
|
|
|
*obj = value;
|
2011-07-19 21:50:41 +02:00
|
|
|
}
|
|
|
|
''',
|
2016-01-29 14:48:57 +01:00
|
|
|
c_name=c_name(name))
|
2011-07-19 21:50:41 +02:00
|
|
|
|
2015-09-16 13:06:16 +02:00
|
|
|
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
def gen_visit_alternate(name, variants):
|
2017-06-07 18:35:59 +02:00
|
|
|
ret = mcgen('''
|
2013-07-08 16:14:21 +02:00
|
|
|
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s **obj, Error **errp)
|
2013-07-08 16:14:21 +02:00
|
|
|
{
|
|
|
|
Error *err = NULL;
|
|
|
|
|
qapi: Change visit_start_implicit_struct to visit_start_alternate
After recent changes, the only remaining use of
visit_start_implicit_struct() is for allocating the space needed
when visiting an alternate. Since the term 'implicit struct' is
hard to explain, rename the function to its current usage. While
at it, we can merge the functionality of visit_get_next_type()
into the same function, making it more like visit_start_struct().
Generated code is now slightly smaller:
| {
| Error *err = NULL;
|
|- visit_start_implicit_struct(v, (void**) obj, sizeof(BlockdevRef), &err);
|+ visit_start_alternate(v, name, (GenericAlternate **)obj, sizeof(**obj),
|+ true, &err);
| if (err) {
| goto out;
| }
|- visit_get_next_type(v, name, &(*obj)->type, true, &err);
|- if (err) {
|- goto out_obj;
|- }
| switch ((*obj)->type) {
| case QTYPE_QDICT:
| visit_start_struct(v, name, NULL, 0, &err);
...
| }
|-out_obj:
|- visit_end_implicit_struct(v);
|+ visit_end_alternate(v);
| out:
| error_propagate(errp, err);
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-16-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:29 +01:00
|
|
|
visit_start_alternate(v, name, (GenericAlternate **)obj, sizeof(**obj),
|
2017-06-07 18:35:59 +02:00
|
|
|
&err);
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
if (err) {
|
|
|
|
goto out;
|
|
|
|
}
|
qapi: Fix crash on missing alternate member of QAPI struct
If a QAPI struct has a mandatory alternate member which is not
present on input, the input visitor reports an error for the
missing alternate without setting the discriminator, but the
cleanup code for the struct still tries to use the dealloc
visitor to clean up the alternate.
Commit dbf11922 changed visit_start_alternate to set *obj to NULL
when an error occurs, where it was previously left untouched.
Thus, before the patch, the dealloc visitor is blindly trying to
cleanup whatever branch corresponds to (*obj)->type == 0 (that is,
QTYPE_NONE, because *obj still pointed to zeroed memory), which
selects the default branch of the switch and sets an error, but
this second error is ignored by the way the dealloc visitor is
used; but after the patch, the attempt to switch dereferences NULL.
When cleaning up after a partial object parse, we specifically
check for !*obj after visit_start_struct() (see gen_visit_object());
doing the same for alternates fixes the crash. Enhance the testsuite
to give coverage for both missing struct and missing alternate
members.
Also add an abort - we expect visit_start_alternate() to either set an
error or to set (*obj)->type to a valid QType that corresponds to
actual user input, and QTYPE_NONE should never be reachable from valid
input. Had the abort() been in place earlier, we might have noticed
the dealloc visitor dereferencing bogus zeroed memory prior to when
commit dbf11922 forced our hand by setting *obj to NULL and causing a
fault.
Test case:
{'execute':'blockdev-add', 'arguments':{'options':{'driver':'raw'}}}
The choice of 'driver':'raw' selects a BlockdevOptionsGenericFormat
struct, which has a mandatory 'file':'BlockdevRef' in QAPI. Since
'file' is missing as a sibling of 'driver', this should report a
graceful error rather than fault. After this patch, we are back to:
{"error": {"class": "GenericError", "desc": "Parameter 'file' is missing"}}
Generated code in qapi-visit.c changes as:
|@@ -2444,6 +2444,9 @@ void visit_type_BlockdevRef(Visitor *v,
| if (err) {
| goto out;
| }
|+ if (!*obj) {
|+ goto out_obj;
|+ }
| switch ((*obj)->type) {
| case QTYPE_QDICT:
| visit_start_struct(v, name, NULL, 0, &err);
|@@ -2459,10 +2462,13 @@ void visit_type_BlockdevRef(Visitor *v,
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
| break;
|+ case QTYPE_NONE:
|+ abort();
| default:
| error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
| "BlockdevRef");
| }
|+out_obj:
| visit_end_alternate(v);
Reported by Kashyap Chamarthy <kchamart@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1466012271-5204-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-15 19:37:51 +02:00
|
|
|
if (!*obj) {
|
|
|
|
goto out_obj;
|
|
|
|
}
|
qapi-visit: Convert to new qapi union layout
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for qapi-visit.py.
Generated code changes look like:
|@@ -4912,16 +4912,16 @@ void visit_type_MemoryDeviceInfo(Visitor
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_MemoryDeviceInfoKind(v, &(*obj)->kind, "type", &err);
|+ visit_type_MemoryDeviceInfoKind(v, &(*obj)->type, "type", &err);
| if (err) {
| goto out_obj;
| }
|- if (!visit_start_union(v, !!(*obj)->data, &err) || err) {
|+ if (!visit_start_union(v, !!(*obj)->u.data, &err) || err) {
| goto out_obj;
| }
|- switch ((*obj)->kind) {
|+ switch ((*obj)->type) {
| case MEMORY_DEVICE_INFO_KIND_DIMM:
|- visit_type_PCDIMMDeviceInfo(v, &(*obj)->dimm, "data", &err);
|+ visit_type_PCDIMMDeviceInfo(v, &(*obj)->u.dimm, "data", &err);
| break;
| default:
| abort();
|@@ -4930,7 +4930,7 @@ out_obj:
| error_propagate(errp, err);
| err = NULL;
| if (*obj) {
|- visit_end_union(v, !!(*obj)->data, &err);
|+ visit_end_union(v, !!(*obj)->u.data, &err);
| }
| error_propagate(errp, err);
| err = NULL;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-14-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-26 23:34:52 +01:00
|
|
|
switch ((*obj)->type) {
|
2013-07-08 16:14:21 +02:00
|
|
|
''',
|
2017-06-07 18:35:59 +02:00
|
|
|
c_name=c_name(name))
|
2013-07-08 16:14:21 +02:00
|
|
|
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
for var in variants.variants:
|
2013-07-08 16:14:21 +02:00
|
|
|
ret += mcgen('''
|
2015-09-16 13:06:16 +02:00
|
|
|
case %(case)s:
|
qapi: Don't box struct branch of alternate
There's no reason to do two malloc's for an alternate type visiting
a QAPI struct; let's just inline the struct directly as the C union
branch of the struct.
Surprisingly, no clients were actually using the struct member prior
to this patch outside of the testsuite; an earlier patch in the series
added some testsuite coverage to make the effect of this patch more
obvious.
In qapi.py, c_type() gains a new is_unboxed flag to control when we
are emitting a C struct unboxed within the context of an outer
struct (different from our other two modes of usage with no flags
for normal local variable declarations, and with is_param for adding
'const' in a parameter list). I don't know if there is any more
pythonic way of collapsing the two flags into a single parameter,
as we never have a caller setting both flags at once.
Ultimately, we want to also unbox branches for QAPI unions, but as
that touches a lot more client code, it is better as separate
patches. But since unions and alternates share gen_variants(), I
had to hack in a way to test if we are visiting an alternate type
for setting the is_unboxed flag: look for a non-object branch.
This works because alternates have at least two branches, with at
most one object branch, while unions have only object branches.
The hack will go away in a later patch.
The generated code difference to qapi-types.h is relatively small:
| struct BlockdevRef {
| QType type;
| union { /* union tag is @type */
| void *data;
|- BlockdevOptions *definition;
|+ BlockdevOptions definition;
| char *reference;
| } u;
| };
The corresponding spot in qapi-visit.c calls visit_type_FOO(), which
first calls visit_start_struct() to allocate or deallocate the member
and handle a layer of {} from the JSON stream, then visits the
members. To peel off the indirection and the memory management that
comes with it, we inline this call, then suppress allocation /
deallocation by passing NULL to visit_start_struct(), and adjust the
member visit:
| switch ((*obj)->type) {
| case QTYPE_QDICT:
|- visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err);
|+ visit_start_struct(v, name, NULL, 0, &err);
|+ if (err) {
|+ break;
|+ }
|+ visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+ visit_end_struct(v, &err);
| break;
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
The visit of non-object fields is unchanged.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-13-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:26 +01:00
|
|
|
''',
|
|
|
|
case=var.type.alternate_qtype())
|
|
|
|
if isinstance(var.type, QAPISchemaObjectType):
|
|
|
|
ret += mcgen('''
|
|
|
|
visit_start_struct(v, name, NULL, 0, &err);
|
|
|
|
if (err) {
|
|
|
|
break;
|
|
|
|
}
|
2016-03-03 17:16:44 +01:00
|
|
|
visit_type_%(c_type)s_members(v, &(*obj)->u.%(c_name)s, &err);
|
qapi: Split visit_end_struct() into pieces
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:27 +02:00
|
|
|
if (!err) {
|
|
|
|
visit_check_struct(v, &err);
|
|
|
|
}
|
qapi: Add parameter to visit_end_*
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:34 +02:00
|
|
|
visit_end_struct(v, NULL);
|
qapi: Don't box struct branch of alternate
There's no reason to do two malloc's for an alternate type visiting
a QAPI struct; let's just inline the struct directly as the C union
branch of the struct.
Surprisingly, no clients were actually using the struct member prior
to this patch outside of the testsuite; an earlier patch in the series
added some testsuite coverage to make the effect of this patch more
obvious.
In qapi.py, c_type() gains a new is_unboxed flag to control when we
are emitting a C struct unboxed within the context of an outer
struct (different from our other two modes of usage with no flags
for normal local variable declarations, and with is_param for adding
'const' in a parameter list). I don't know if there is any more
pythonic way of collapsing the two flags into a single parameter,
as we never have a caller setting both flags at once.
Ultimately, we want to also unbox branches for QAPI unions, but as
that touches a lot more client code, it is better as separate
patches. But since unions and alternates share gen_variants(), I
had to hack in a way to test if we are visiting an alternate type
for setting the is_unboxed flag: look for a non-object branch.
This works because alternates have at least two branches, with at
most one object branch, while unions have only object branches.
The hack will go away in a later patch.
The generated code difference to qapi-types.h is relatively small:
| struct BlockdevRef {
| QType type;
| union { /* union tag is @type */
| void *data;
|- BlockdevOptions *definition;
|+ BlockdevOptions definition;
| char *reference;
| } u;
| };
The corresponding spot in qapi-visit.c calls visit_type_FOO(), which
first calls visit_start_struct() to allocate or deallocate the member
and handle a layer of {} from the JSON stream, then visits the
members. To peel off the indirection and the memory management that
comes with it, we inline this call, then suppress allocation /
deallocation by passing NULL to visit_start_struct(), and adjust the
member visit:
| switch ((*obj)->type) {
| case QTYPE_QDICT:
|- visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err);
|+ visit_start_struct(v, name, NULL, 0, &err);
|+ if (err) {
|+ break;
|+ }
|+ visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+ visit_end_struct(v, &err);
| break;
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
The visit of non-object fields is unchanged.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-13-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:26 +01:00
|
|
|
''',
|
|
|
|
c_type=var.type.c_name(),
|
|
|
|
c_name=c_name(var.name))
|
|
|
|
else:
|
|
|
|
ret += mcgen('''
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
visit_type_%(c_type)s(v, name, &(*obj)->u.%(c_name)s, &err);
|
2013-07-08 16:14:21 +02:00
|
|
|
''',
|
qapi: Don't box struct branch of alternate
There's no reason to do two malloc's for an alternate type visiting
a QAPI struct; let's just inline the struct directly as the C union
branch of the struct.
Surprisingly, no clients were actually using the struct member prior
to this patch outside of the testsuite; an earlier patch in the series
added some testsuite coverage to make the effect of this patch more
obvious.
In qapi.py, c_type() gains a new is_unboxed flag to control when we
are emitting a C struct unboxed within the context of an outer
struct (different from our other two modes of usage with no flags
for normal local variable declarations, and with is_param for adding
'const' in a parameter list). I don't know if there is any more
pythonic way of collapsing the two flags into a single parameter,
as we never have a caller setting both flags at once.
Ultimately, we want to also unbox branches for QAPI unions, but as
that touches a lot more client code, it is better as separate
patches. But since unions and alternates share gen_variants(), I
had to hack in a way to test if we are visiting an alternate type
for setting the is_unboxed flag: look for a non-object branch.
This works because alternates have at least two branches, with at
most one object branch, while unions have only object branches.
The hack will go away in a later patch.
The generated code difference to qapi-types.h is relatively small:
| struct BlockdevRef {
| QType type;
| union { /* union tag is @type */
| void *data;
|- BlockdevOptions *definition;
|+ BlockdevOptions definition;
| char *reference;
| } u;
| };
The corresponding spot in qapi-visit.c calls visit_type_FOO(), which
first calls visit_start_struct() to allocate or deallocate the member
and handle a layer of {} from the JSON stream, then visits the
members. To peel off the indirection and the memory management that
comes with it, we inline this call, then suppress allocation /
deallocation by passing NULL to visit_start_struct(), and adjust the
member visit:
| switch ((*obj)->type) {
| case QTYPE_QDICT:
|- visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err);
|+ visit_start_struct(v, name, NULL, 0, &err);
|+ if (err) {
|+ break;
|+ }
|+ visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+ visit_end_struct(v, &err);
| break;
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
The visit of non-object fields is unchanged.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-13-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-18 07:48:26 +01:00
|
|
|
c_type=var.type.c_name(),
|
|
|
|
c_name=c_name(var.name))
|
|
|
|
ret += mcgen('''
|
|
|
|
break;
|
|
|
|
''')
|
2013-07-08 16:14:21 +02:00
|
|
|
|
|
|
|
ret += mcgen('''
|
qapi: Fix crash on missing alternate member of QAPI struct
If a QAPI struct has a mandatory alternate member which is not
present on input, the input visitor reports an error for the
missing alternate without setting the discriminator, but the
cleanup code for the struct still tries to use the dealloc
visitor to clean up the alternate.
Commit dbf11922 changed visit_start_alternate to set *obj to NULL
when an error occurs, where it was previously left untouched.
Thus, before the patch, the dealloc visitor is blindly trying to
cleanup whatever branch corresponds to (*obj)->type == 0 (that is,
QTYPE_NONE, because *obj still pointed to zeroed memory), which
selects the default branch of the switch and sets an error, but
this second error is ignored by the way the dealloc visitor is
used; but after the patch, the attempt to switch dereferences NULL.
When cleaning up after a partial object parse, we specifically
check for !*obj after visit_start_struct() (see gen_visit_object());
doing the same for alternates fixes the crash. Enhance the testsuite
to give coverage for both missing struct and missing alternate
members.
Also add an abort - we expect visit_start_alternate() to either set an
error or to set (*obj)->type to a valid QType that corresponds to
actual user input, and QTYPE_NONE should never be reachable from valid
input. Had the abort() been in place earlier, we might have noticed
the dealloc visitor dereferencing bogus zeroed memory prior to when
commit dbf11922 forced our hand by setting *obj to NULL and causing a
fault.
Test case:
{'execute':'blockdev-add', 'arguments':{'options':{'driver':'raw'}}}
The choice of 'driver':'raw' selects a BlockdevOptionsGenericFormat
struct, which has a mandatory 'file':'BlockdevRef' in QAPI. Since
'file' is missing as a sibling of 'driver', this should report a
graceful error rather than fault. After this patch, we are back to:
{"error": {"class": "GenericError", "desc": "Parameter 'file' is missing"}}
Generated code in qapi-visit.c changes as:
|@@ -2444,6 +2444,9 @@ void visit_type_BlockdevRef(Visitor *v,
| if (err) {
| goto out;
| }
|+ if (!*obj) {
|+ goto out_obj;
|+ }
| switch ((*obj)->type) {
| case QTYPE_QDICT:
| visit_start_struct(v, name, NULL, 0, &err);
|@@ -2459,10 +2462,13 @@ void visit_type_BlockdevRef(Visitor *v,
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
| break;
|+ case QTYPE_NONE:
|+ abort();
| default:
| error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
| "BlockdevRef");
| }
|+out_obj:
| visit_end_alternate(v);
Reported by Kashyap Chamarthy <kchamart@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1466012271-5204-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-15 19:37:51 +02:00
|
|
|
case QTYPE_NONE:
|
|
|
|
abort();
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
default:
|
qapi: Simplify visiting of alternate types
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:48 +01:00
|
|
|
error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
|
|
|
|
"%(name)s");
|
2013-07-08 16:14:21 +02:00
|
|
|
}
|
qapi: Fix crash on missing alternate member of QAPI struct
If a QAPI struct has a mandatory alternate member which is not
present on input, the input visitor reports an error for the
missing alternate without setting the discriminator, but the
cleanup code for the struct still tries to use the dealloc
visitor to clean up the alternate.
Commit dbf11922 changed visit_start_alternate to set *obj to NULL
when an error occurs, where it was previously left untouched.
Thus, before the patch, the dealloc visitor is blindly trying to
cleanup whatever branch corresponds to (*obj)->type == 0 (that is,
QTYPE_NONE, because *obj still pointed to zeroed memory), which
selects the default branch of the switch and sets an error, but
this second error is ignored by the way the dealloc visitor is
used; but after the patch, the attempt to switch dereferences NULL.
When cleaning up after a partial object parse, we specifically
check for !*obj after visit_start_struct() (see gen_visit_object());
doing the same for alternates fixes the crash. Enhance the testsuite
to give coverage for both missing struct and missing alternate
members.
Also add an abort - we expect visit_start_alternate() to either set an
error or to set (*obj)->type to a valid QType that corresponds to
actual user input, and QTYPE_NONE should never be reachable from valid
input. Had the abort() been in place earlier, we might have noticed
the dealloc visitor dereferencing bogus zeroed memory prior to when
commit dbf11922 forced our hand by setting *obj to NULL and causing a
fault.
Test case:
{'execute':'blockdev-add', 'arguments':{'options':{'driver':'raw'}}}
The choice of 'driver':'raw' selects a BlockdevOptionsGenericFormat
struct, which has a mandatory 'file':'BlockdevRef' in QAPI. Since
'file' is missing as a sibling of 'driver', this should report a
graceful error rather than fault. After this patch, we are back to:
{"error": {"class": "GenericError", "desc": "Parameter 'file' is missing"}}
Generated code in qapi-visit.c changes as:
|@@ -2444,6 +2444,9 @@ void visit_type_BlockdevRef(Visitor *v,
| if (err) {
| goto out;
| }
|+ if (!*obj) {
|+ goto out_obj;
|+ }
| switch ((*obj)->type) {
| case QTYPE_QDICT:
| visit_start_struct(v, name, NULL, 0, &err);
|@@ -2459,10 +2462,13 @@ void visit_type_BlockdevRef(Visitor *v,
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
| break;
|+ case QTYPE_NONE:
|+ abort();
| default:
| error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
| "BlockdevRef");
| }
|+out_obj:
| visit_end_alternate(v);
Reported by Kashyap Chamarthy <kchamart@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1466012271-5204-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-15 19:37:51 +02:00
|
|
|
out_obj:
|
qapi: Add parameter to visit_end_*
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:34 +02:00
|
|
|
visit_end_alternate(v, (void **)obj);
|
2016-04-28 23:45:32 +02:00
|
|
|
if (err && visit_is_input(v)) {
|
|
|
|
qapi_free_%(c_name)s(*obj);
|
|
|
|
*obj = NULL;
|
|
|
|
}
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
out:
|
|
|
|
error_propagate(errp, err);
|
2013-07-08 16:14:21 +02:00
|
|
|
}
|
qapi: Simplify visiting of alternate types
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:48 +01:00
|
|
|
''',
|
2016-04-28 23:45:32 +02:00
|
|
|
name=name, c_name=c_name(name))
|
2013-07-08 16:14:21 +02:00
|
|
|
|
|
|
|
return ret
|
|
|
|
|
2015-09-16 13:06:16 +02:00
|
|
|
|
2016-02-18 07:48:21 +01:00
|
|
|
def gen_visit_object(name, base, members, variants):
|
qapi: Emit implicit structs in generated C
We already have several places that want to visit all the members
of an implicit object within a larger context (simple union variant,
event with anonymous data, command with anonymous arguments struct);
and will be adding another one soon (the ability to declare an
anonymous base for a flat union). Having a C struct declared for
these implicit types, along with a visit_type_FOO_members() helper
function, will make for fewer special cases in our generator.
We do not, however, need qapi_free_FOO() or visit_type_FOO()
functions for implicit types, because they should not be used
directly outside of the generated code. This is done by adding a
conditional in visit_object_type() for both qapi-types.py and
qapi-visit.py based on the object name. The comparison of
"name.startswith('q_')" is a bit hacky (it's basically duplicating
what .is_implicit() already uses), but beats changing the signature
of the visit_object_type() callback to pass a new 'implicit' flag.
The hack should be temporary: we are considering adding a future
patch that consolidates the narrow visit_object_type(..., base,
local_members, variants) and visit_object_type_flat(...,
all_members, variants) [where different sets of information are
already broken out, and the QAPISchemaObjectType is no longer
available] into a broader visit_object_type(obj_type) [where the
visitor can query the needed fields from obj_type directly].
Also, now that we WANT to output C code for implicits, we no longer
need the visit_needed() filter, leaving 'q_empty' as the only object
still needing a special case. Remember, 'q_empty' is the only
built-in generated object, which means that without a special case
it would be emitted in multiple files (the main qapi-types.h and in
qga-qapi-types.h) causing compilation failure due to redefinition.
But since it has no members, it's easier to just avoid an attempt to
visit that particular type; since gen_object() is called recursively,
we also prime the objects_seen set to cover any recursion into the
empty type.
The patch relies on the changed naming of implicit types in the
previous patch. It is a bit unfortunate that the generated struct
names and visit_type_FOO_members() don't match normal naming
conventions, but it's not too bad, since they will only be used in
generated code.
The generated code grows substantially in size: the implicit
'-wrapper' types must be emitted in qapi-types.h before any union
can include an unboxed member of that type. Arguably, the '-args'
types could be emitted in a private header for just qapi-visit.c
and qmp-marshal.c, rather than polluting qapi-types.h; but adding
complexity to the generator to split the output location according
to role doesn't seem worth the maintenance costs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:30 +01:00
|
|
|
return mcgen('''
|
2011-07-19 21:50:41 +02:00
|
|
|
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s **obj, Error **errp)
|
2011-07-19 21:50:41 +02:00
|
|
|
{
|
2012-03-06 18:55:56 +01:00
|
|
|
Error *err = NULL;
|
|
|
|
|
2016-01-29 14:48:57 +01:00
|
|
|
visit_start_struct(v, name, (void **)obj, sizeof(%(c_name)s), &err);
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
if (err) {
|
|
|
|
goto out;
|
|
|
|
}
|
2015-09-30 00:21:11 +02:00
|
|
|
if (!*obj) {
|
|
|
|
goto out_obj;
|
|
|
|
}
|
2016-03-03 17:16:44 +01:00
|
|
|
visit_type_%(c_name)s_members(v, *obj, &err);
|
qapi: Split visit_end_struct() into pieces
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28 23:45:27 +02:00
|
|
|
if (err) {
|
|
|
|
goto out_obj;
|
|
|
|
}
|
|
|
|
visit_check_struct(v, &err);
|
2016-02-18 07:48:20 +01:00
|
|
|
out_obj:
|
qapi: Add parameter to visit_end_*
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 18:48:34 +02:00
|
|
|
visit_end_struct(v, (void **)obj);
|
2016-04-28 23:45:32 +02:00
|
|
|
if (err && visit_is_input(v)) {
|
|
|
|
qapi_free_%(c_name)s(*obj);
|
|
|
|
*obj = NULL;
|
|
|
|
}
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
out:
|
|
|
|
error_propagate(errp, err);
|
2012-03-06 18:55:56 +01:00
|
|
|
}
|
2016-02-18 07:48:20 +01:00
|
|
|
''',
|
|
|
|
c_name=c_name(name))
|
2012-03-06 18:55:56 +01:00
|
|
|
|
2015-09-16 13:06:16 +02:00
|
|
|
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
class QAPISchemaGenVisitVisitor(QAPISchemaVisitor):
|
|
|
|
def __init__(self):
|
|
|
|
self.decl = None
|
|
|
|
self.defn = None
|
|
|
|
self._btin = None
|
|
|
|
|
|
|
|
def visit_begin(self, schema):
|
|
|
|
self.decl = ''
|
|
|
|
self.defn = ''
|
|
|
|
self._btin = guardstart('QAPI_VISIT_BUILTIN')
|
|
|
|
|
|
|
|
def visit_end(self):
|
|
|
|
# To avoid header dependency hell, we always generate
|
|
|
|
# declarations for built-in types in our header files and
|
|
|
|
# simply guard them. See also do_builtins (command line
|
|
|
|
# option -b).
|
|
|
|
self._btin += guardend('QAPI_VISIT_BUILTIN')
|
|
|
|
self.decl = self._btin + self.decl
|
|
|
|
self._btin = None
|
|
|
|
|
|
|
|
def visit_enum_type(self, name, info, values, prefix):
|
qapi: Convert QType into QAPI built-in enum type
What's more meta than using qapi to define qapi? :)
Convert QType into a full-fledged[*] builtin qapi enum type, so
that a subsequent patch can then use it as the discriminator
type of qapi alternate types. Fortunately, the judicious use of
'prefix' in the qapi definition avoids churn to the spelling of
the enum constants.
To avoid circular definitions, we have to flip the order of
inclusion between "qobject.h" vs. "qapi-types.h". Back in commit
28770e0, we had the latter include the former, so that we could
use 'QObject *' for our implementation of 'any'. But that usage
also works with only a forward declaration, whereas the
definition of QObject requires QType to be a complete type.
[*] The type has to be builtin, rather than declared in
qapi/common.json, because we want to use it for alternates even
when common.json is not included. But since it is the first
builtin enum type, we have to add special cases to qapi-types
and qapi-visit to only emit definitions once, even when two
qapi files are being compiled into the same binary (the way we
already handled builtin list types like 'intList'). We may
need to revisit how multiple qapi files share common types,
but that's a project for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:47 +01:00
|
|
|
# Special case for our lone builtin enum type
|
|
|
|
# TODO use something cleaner than existence of info
|
|
|
|
if not info:
|
|
|
|
self._btin += gen_visit_decl(name, scalar=True)
|
|
|
|
if do_builtins:
|
|
|
|
self.defn += gen_visit_enum(name)
|
|
|
|
else:
|
|
|
|
self.decl += gen_visit_decl(name, scalar=True)
|
|
|
|
self.defn += gen_visit_enum(name)
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
|
|
|
|
def visit_array_type(self, name, info, element_type):
|
|
|
|
decl = gen_visit_decl(name)
|
|
|
|
defn = gen_visit_list(name, element_type)
|
|
|
|
if isinstance(element_type, QAPISchemaBuiltinType):
|
|
|
|
self._btin += decl
|
|
|
|
if do_builtins:
|
|
|
|
self.defn += defn
|
|
|
|
else:
|
|
|
|
self.decl += decl
|
|
|
|
self.defn += defn
|
|
|
|
|
|
|
|
def visit_object_type(self, name, info, base, members, variants):
|
qapi: Emit implicit structs in generated C
We already have several places that want to visit all the members
of an implicit object within a larger context (simple union variant,
event with anonymous data, command with anonymous arguments struct);
and will be adding another one soon (the ability to declare an
anonymous base for a flat union). Having a C struct declared for
these implicit types, along with a visit_type_FOO_members() helper
function, will make for fewer special cases in our generator.
We do not, however, need qapi_free_FOO() or visit_type_FOO()
functions for implicit types, because they should not be used
directly outside of the generated code. This is done by adding a
conditional in visit_object_type() for both qapi-types.py and
qapi-visit.py based on the object name. The comparison of
"name.startswith('q_')" is a bit hacky (it's basically duplicating
what .is_implicit() already uses), but beats changing the signature
of the visit_object_type() callback to pass a new 'implicit' flag.
The hack should be temporary: we are considering adding a future
patch that consolidates the narrow visit_object_type(..., base,
local_members, variants) and visit_object_type_flat(...,
all_members, variants) [where different sets of information are
already broken out, and the QAPISchemaObjectType is no longer
available] into a broader visit_object_type(obj_type) [where the
visitor can query the needed fields from obj_type directly].
Also, now that we WANT to output C code for implicits, we no longer
need the visit_needed() filter, leaving 'q_empty' as the only object
still needing a special case. Remember, 'q_empty' is the only
built-in generated object, which means that without a special case
it would be emitted in multiple files (the main qapi-types.h and in
qga-qapi-types.h) causing compilation failure due to redefinition.
But since it has no members, it's easier to just avoid an attempt to
visit that particular type; since gen_object() is called recursively,
we also prime the objects_seen set to cover any recursion into the
empty type.
The patch relies on the changed naming of implicit types in the
previous patch. It is a bit unfortunate that the generated struct
names and visit_type_FOO_members() don't match normal naming
conventions, but it's not too bad, since they will only be used in
generated code.
The generated code grows substantially in size: the implicit
'-wrapper' types must be emitted in qapi-types.h before any union
can include an unboxed member of that type. Arguably, the '-args'
types could be emitted in a private header for just qapi-visit.c
and qmp-marshal.c, rather than polluting qapi-types.h; but adding
complexity to the generator to split the output location according
to role doesn't seem worth the maintenance costs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:30 +01:00
|
|
|
# Nothing to do for the special empty builtin
|
|
|
|
if name == 'q_empty':
|
|
|
|
return
|
qapi-visit: Expose visit_type_FOO_members()
Dan Berrange reported a case where he needs to work with a
QCryptoBlockOptions union type using the OptsVisitor, but only
visit one of the branches of that type (the discriminator is not
visited directly, but learned externally). When things were
boxed, it was easy: just visit the variant directly, which took
care of both allocating the variant and visiting its members, then
store that pointer in the union type. But now that things are
unboxed, we need a way to visit the members without allocation,
done by exposing visit_type_FOO_members() to the user.
Before the patch, we had quite a bit of code associated with
object_members_seen to make sure that a declaration of the helper
was in scope before any use of the function. But now that the
helper is public and declared in the header, the .c file no
longer needs to worry about topological sorting (the helper is
always in scope), which leads to some nice cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-03 17:16:45 +01:00
|
|
|
self.decl += gen_visit_members_decl(name)
|
qapi: Emit implicit structs in generated C
We already have several places that want to visit all the members
of an implicit object within a larger context (simple union variant,
event with anonymous data, command with anonymous arguments struct);
and will be adding another one soon (the ability to declare an
anonymous base for a flat union). Having a C struct declared for
these implicit types, along with a visit_type_FOO_members() helper
function, will make for fewer special cases in our generator.
We do not, however, need qapi_free_FOO() or visit_type_FOO()
functions for implicit types, because they should not be used
directly outside of the generated code. This is done by adding a
conditional in visit_object_type() for both qapi-types.py and
qapi-visit.py based on the object name. The comparison of
"name.startswith('q_')" is a bit hacky (it's basically duplicating
what .is_implicit() already uses), but beats changing the signature
of the visit_object_type() callback to pass a new 'implicit' flag.
The hack should be temporary: we are considering adding a future
patch that consolidates the narrow visit_object_type(..., base,
local_members, variants) and visit_object_type_flat(...,
all_members, variants) [where different sets of information are
already broken out, and the QAPISchemaObjectType is no longer
available] into a broader visit_object_type(obj_type) [where the
visitor can query the needed fields from obj_type directly].
Also, now that we WANT to output C code for implicits, we no longer
need the visit_needed() filter, leaving 'q_empty' as the only object
still needing a special case. Remember, 'q_empty' is the only
built-in generated object, which means that without a special case
it would be emitted in multiple files (the main qapi-types.h and in
qga-qapi-types.h) causing compilation failure due to redefinition.
But since it has no members, it's easier to just avoid an attempt to
visit that particular type; since gen_object() is called recursively,
we also prime the objects_seen set to cover any recursion into the
empty type.
The patch relies on the changed naming of implicit types in the
previous patch. It is a bit unfortunate that the generated struct
names and visit_type_FOO_members() don't match normal naming
conventions, but it's not too bad, since they will only be used in
generated code.
The generated code grows substantially in size: the implicit
'-wrapper' types must be emitted in qapi-types.h before any union
can include an unboxed member of that type. Arguably, the '-args'
types could be emitted in a private header for just qapi-visit.c
and qmp-marshal.c, rather than polluting qapi-types.h; but adding
complexity to the generator to split the output location according
to role doesn't seem worth the maintenance costs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:30 +01:00
|
|
|
self.defn += gen_visit_object_members(name, base, members, variants)
|
|
|
|
# TODO Worth changing the visitor signature, so we could
|
|
|
|
# directly use rather than repeat type.is_implicit()?
|
|
|
|
if not name.startswith('q_'):
|
|
|
|
# only explicit types need an allocating visit
|
|
|
|
self.decl += gen_visit_decl(name)
|
|
|
|
self.defn += gen_visit_object(name, base, members, variants)
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
|
|
|
|
def visit_alternate_type(self, name, info, variants):
|
|
|
|
self.decl += gen_visit_decl(name)
|
|
|
|
self.defn += gen_visit_alternate(name, variants)
|
|
|
|
|
|
|
|
# If you link code generated from multiple schemata, you want only one
|
|
|
|
# instance of the code for built-in types. Generate it only when
|
|
|
|
# do_builtins, enabled by command line option -b. See also
|
|
|
|
# QAPISchemaGenVisitVisitor.visit_end().
|
2013-05-11 00:46:02 +02:00
|
|
|
do_builtins = False
|
2011-12-27 15:02:16 +01:00
|
|
|
|
2015-04-02 13:12:21 +02:00
|
|
|
(input_file, output_dir, do_c, do_h, prefix, opts) = \
|
2017-03-15 13:57:08 +01:00
|
|
|
parse_command_line('b', ['builtins'])
|
2015-04-02 13:12:21 +02:00
|
|
|
|
2011-07-19 21:50:41 +02:00
|
|
|
for o, a in opts:
|
2017-03-15 13:57:08 +01:00
|
|
|
if o in ('-b', '--builtins'):
|
2013-05-11 00:46:02 +02:00
|
|
|
do_builtins = True
|
2011-12-27 15:02:16 +01:00
|
|
|
|
2015-04-02 14:46:39 +02:00
|
|
|
c_comment = '''
|
2011-07-19 21:50:41 +02:00
|
|
|
/*
|
|
|
|
* schema-defined QAPI visitor functions
|
|
|
|
*
|
|
|
|
* Copyright IBM, Corp. 2011
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
*
|
|
|
|
* This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
|
|
|
|
* See the COPYING.LIB file in the top-level directory.
|
|
|
|
*
|
|
|
|
*/
|
2015-04-02 14:46:39 +02:00
|
|
|
'''
|
|
|
|
h_comment = '''
|
2011-07-19 21:50:41 +02:00
|
|
|
/*
|
qapi: Replace uncommon use of the error API by the common one
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 09:53:54 +02:00
|
|
|
* schema-defined QAPI visitor functions
|
2011-07-19 21:50:41 +02:00
|
|
|
*
|
|
|
|
* Copyright IBM, Corp. 2011
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
*
|
|
|
|
* This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
|
|
|
|
* See the COPYING.LIB file in the top-level directory.
|
|
|
|
*
|
|
|
|
*/
|
2015-04-02 14:46:39 +02:00
|
|
|
'''
|
|
|
|
|
|
|
|
(fdef, fdecl) = open_output(output_dir, do_c, do_h, prefix,
|
|
|
|
'qapi-visit.c', 'qapi-visit.h',
|
|
|
|
c_comment, h_comment)
|
2011-07-19 21:50:41 +02:00
|
|
|
|
2015-04-02 14:46:39 +02:00
|
|
|
fdef.write(mcgen('''
|
2016-02-08 16:36:46 +01:00
|
|
|
#include "qemu/osdep.h"
|
2015-04-02 14:46:39 +02:00
|
|
|
#include "qemu-common.h"
|
include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-14 09:01:28 +01:00
|
|
|
#include "qapi/error.h"
|
2015-04-02 14:46:39 +02:00
|
|
|
#include "%(prefix)sqapi-visit.h"
|
|
|
|
''',
|
2015-09-16 13:06:16 +02:00
|
|
|
prefix=prefix))
|
2011-07-19 21:50:41 +02:00
|
|
|
|
2015-04-02 14:46:39 +02:00
|
|
|
fdecl.write(mcgen('''
|
2012-12-17 18:19:43 +01:00
|
|
|
#include "qapi/visitor.h"
|
qapi: Simplify visiting of alternate types
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02 06:20:48 +01:00
|
|
|
#include "qapi/qmp/qerror.h"
|
2011-07-19 21:50:41 +02:00
|
|
|
#include "%(prefix)sqapi-types.h"
|
2013-05-11 00:46:02 +02:00
|
|
|
|
2011-07-19 21:50:41 +02:00
|
|
|
''',
|
2015-04-02 14:46:39 +02:00
|
|
|
prefix=prefix))
|
2011-07-19 21:50:41 +02:00
|
|
|
|
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-16 13:06:10 +02:00
|
|
|
schema = QAPISchema(input_file)
|
|
|
|
gen = QAPISchemaGenVisitVisitor()
|
|
|
|
schema.visit(gen)
|
|
|
|
fdef.write(gen.defn)
|
|
|
|
fdecl.write(gen.decl)
|
2011-07-19 21:50:41 +02:00
|
|
|
|
2015-04-02 14:46:39 +02:00
|
|
|
close_output(fdef, fdecl)
|