qemu-e2k/net/filter-buffer.c

213 lines
6.3 KiB
C
Raw Normal View History

/*
* Copyright (c) 2015 FUJITSU LIMITED
* Author: Yang Hongyang <yanghy@cn.fujitsu.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "net/filter.h"
#include "net/queue.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "qemu/timer.h"
#include "qemu/iov.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/qmp/qerror.h"
#include "qom/object.h"
#define TYPE_FILTER_BUFFER "filter-buffer"
#define FILTER_BUFFER(obj) \
OBJECT_CHECK(FilterBufferState, (obj), TYPE_FILTER_BUFFER)
typedef struct FilterBufferState {
NetFilterState parent_obj;
NetQueue *incoming_queue;
uint32_t interval;
QEMUTimer release_timer;
} FilterBufferState;
static void filter_buffer_flush(NetFilterState *nf)
{
FilterBufferState *s = FILTER_BUFFER(nf);
if (!qemu_net_queue_flush(s->incoming_queue)) {
/* Unable to empty the queue, purge remaining packets */
qemu_net_queue_purge(s->incoming_queue, nf->netdev);
}
}
static void filter_buffer_release_timer(void *opaque)
{
NetFilterState *nf = opaque;
FilterBufferState *s = FILTER_BUFFER(nf);
/*
* Note: filter_buffer_flush() drops packets that can't be sent
* TODO: We should leave them queued. But currently there's no way
* for the next filter or receiver to notify us that it can receive
* more packets.
*/
filter_buffer_flush(nf);
/* Timer rearmed to fire again in s->interval microseconds. */
timer_mod(&s->release_timer,
qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + s->interval);
}
/* filter APIs */
static ssize_t filter_buffer_receive_iov(NetFilterState *nf,
NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
NetPacketSent *sent_cb)
{
FilterBufferState *s = FILTER_BUFFER(nf);
/*
* We return size when buffer a packet, the sender will take it as
* a already sent packet, so sent_cb should not be called later.
*
* FIXME: Even if the guest can't receive packets for some reasons,
* the filter can still accept packets until its internal queue is full.
* For example:
* For some reason, receiver could not receive more packets
* (.can_receive() returns zero). Without a filter, at most one packet
* will be queued in incoming queue and sender's poll will be disabled
* unit its sent_cb() was called. With a filter, it will keep receiving
* the packets without caring about the receiver. This is suboptimal.
* May need more thoughts (e.g keeping sent_cb).
*/
qemu_net_queue_append_iov(s->incoming_queue, sender, flags,
iov, iovcnt, NULL);
return iov_size(iov, iovcnt);
}
static void filter_buffer_cleanup(NetFilterState *nf)
{
FilterBufferState *s = FILTER_BUFFER(nf);
if (s->interval) {
timer_del(&s->release_timer);
}
/* flush packets */
if (s->incoming_queue) {
filter_buffer_flush(nf);
g_free(s->incoming_queue);
}
}
static void filter_buffer_setup_timer(NetFilterState *nf)
{
FilterBufferState *s = FILTER_BUFFER(nf);
if (s->interval) {
timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
filter_buffer_release_timer, nf);
/* Timer armed to fire in s->interval microseconds. */
timer_mod(&s->release_timer,
qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + s->interval);
}
}
static void filter_buffer_setup(NetFilterState *nf, Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(nf);
/*
* We may want to accept zero interval when VM FT solutions like MC
* or COLO use this filter to release packets on demand.
*/
if (!s->interval) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "interval",
"a non-zero interval");
return;
}
s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
filter_buffer_setup_timer(nf);
}
static void filter_buffer_status_changed(NetFilterState *nf, Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(nf);
if (!nf->on) {
if (s->interval) {
timer_del(&s->release_timer);
}
filter_buffer_flush(nf);
} else {
filter_buffer_setup_timer(nf);
}
}
static void filter_buffer_class_init(ObjectClass *oc, void *data)
{
NetFilterClass *nfc = NETFILTER_CLASS(oc);
nfc->setup = filter_buffer_setup;
nfc->cleanup = filter_buffer_cleanup;
nfc->receive_iov = filter_buffer_receive_iov;
nfc->status_changed = filter_buffer_status_changed;
}
static void filter_buffer_get_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(obj);
uint32_t value = s->interval;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, errp);
}
static void filter_buffer_set_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(obj);
Error *local_err = NULL;
uint32_t value;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err, "Property '%s.%s' requires a positive value",
object_get_typename(obj), name);
goto out;
}
s->interval = value;
out:
error_propagate(errp, local_err);
}
static void filter_buffer_init(Object *obj)
{
object_property_add(obj, "interval", "uint32",
filter_buffer_get_interval,
filter_buffer_set_interval, NULL, NULL, NULL);
}
static const TypeInfo filter_buffer_info = {
.name = TYPE_FILTER_BUFFER,
.parent = TYPE_NETFILTER,
.class_init = filter_buffer_class_init,
.instance_init = filter_buffer_init,
.instance_size = sizeof(FilterBufferState),
};
static void register_types(void)
{
type_register_static(&filter_buffer_info);
}
type_init(register_types);