qemu-e2k/util/main-loop.c

595 lines
16 KiB
C
Raw Normal View History

/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/cutils.h"
#include "qemu/timer.h"
#include "sysemu/cpu-timers.h"
#include "sysemu/replay.h"
#include "qemu/main-loop.h"
#include "block/aio.h"
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 21:52:53 +02:00
#include "qemu/error-report.h"
#include "qemu/queue.h"
cfi: Initial support for cfi-icall in QEMU LLVM/Clang, supports runtime checks for forward-edge Control-Flow Integrity (CFI). CFI on indirect function calls (cfi-icall) ensures that, in indirect function calls, the function called is of the right signature for the pointer type defined at compile time. For this check to work, the code must always respect the function signature when using function pointer, the function must be defined at compile time, and be compiled with link-time optimization. This rules out, for example, shared libraries that are dynamically loaded (given that functions are not known at compile time), and code that is dynamically generated at run-time. This patch: 1) Introduces the CONFIG_CFI flag to support cfi in QEMU 2) Introduces a decorator to allow the definition of "sensitive" functions, where a non-instrumented function may be called at runtime through a pointer. The decorator will take care of disabling cfi-icall checks on such functions, when cfi is enabled. 3) Marks functions currently in QEMU that exhibit such behavior, in particular: - The function in TCG that calls pre-compiled TBs - The function in TCI that interprets instructions - Functions in the plugin infrastructures that jump to callbacks - Functions in util that directly call a signal handler Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> Acked-by: Alex Bennée <alex.bennee@linaro.org Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-05 00:06:12 +01:00
#include "qemu/compiler.h"
#ifndef _WIN32
#include <sys/wait.h>
#endif
#ifndef _WIN32
/* If we have signalfd, we mask out the signals we want to handle and then
* use signalfd to listen for them. We rely on whatever the current signal
* handler is to dispatch the signals when we receive them.
*/
cfi: Initial support for cfi-icall in QEMU LLVM/Clang, supports runtime checks for forward-edge Control-Flow Integrity (CFI). CFI on indirect function calls (cfi-icall) ensures that, in indirect function calls, the function called is of the right signature for the pointer type defined at compile time. For this check to work, the code must always respect the function signature when using function pointer, the function must be defined at compile time, and be compiled with link-time optimization. This rules out, for example, shared libraries that are dynamically loaded (given that functions are not known at compile time), and code that is dynamically generated at run-time. This patch: 1) Introduces the CONFIG_CFI flag to support cfi in QEMU 2) Introduces a decorator to allow the definition of "sensitive" functions, where a non-instrumented function may be called at runtime through a pointer. The decorator will take care of disabling cfi-icall checks on such functions, when cfi is enabled. 3) Marks functions currently in QEMU that exhibit such behavior, in particular: - The function in TCG that calls pre-compiled TBs - The function in TCI that interprets instructions - Functions in the plugin infrastructures that jump to callbacks - Functions in util that directly call a signal handler Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> Acked-by: Alex Bennée <alex.bennee@linaro.org Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-05 00:06:12 +01:00
/*
* Disable CFI checks.
* We are going to call a signal hander directly. Such handler may or may not
* have been defined in our binary, so there's no guarantee that the pointer
* used to set the handler is a cfi-valid pointer. Since the handlers are
* stored in kernel memory, changing the handler to an attacker-defined
* function requires being able to call a sigaction() syscall,
* which is not as easy as overwriting a pointer in memory.
*/
QEMU_DISABLE_CFI
static void sigfd_handler(void *opaque)
{
int fd = (intptr_t)opaque;
struct qemu_signalfd_siginfo info;
struct sigaction action;
ssize_t len;
while (1) {
do {
len = read(fd, &info, sizeof(info));
} while (len == -1 && errno == EINTR);
if (len == -1 && errno == EAGAIN) {
break;
}
if (len != sizeof(info)) {
error_report("read from sigfd returned %zd: %s", len,
g_strerror(errno));
return;
}
sigaction(info.ssi_signo, NULL, &action);
if ((action.sa_flags & SA_SIGINFO) && action.sa_sigaction) {
sigaction_invoke(&action, &info);
} else if (action.sa_handler) {
action.sa_handler(info.ssi_signo);
}
}
}
static int qemu_signal_init(Error **errp)
{
int sigfd;
sigset_t set;
/*
* SIG_IPI must be blocked in the main thread and must not be caught
* by sigwait() in the signal thread. Otherwise, the cpu thread will
* not catch it reliably.
*/
sigemptyset(&set);
sigaddset(&set, SIG_IPI);
sigaddset(&set, SIGIO);
sigaddset(&set, SIGALRM);
sigaddset(&set, SIGBUS);
/* SIGINT cannot be handled via signalfd, so that ^C can be used
* to interrupt QEMU when it is being run under gdb. SIGHUP and
* SIGTERM are also handled asynchronously, even though it is not
* strictly necessary, because they use the same handler as SIGINT.
*/
pthread_sigmask(SIG_BLOCK, &set, NULL);
sigdelset(&set, SIG_IPI);
sigfd = qemu_signalfd(&set);
if (sigfd == -1) {
error_setg_errno(errp, errno, "failed to create signalfd");
return -errno;
}
fcntl_setfl(sigfd, O_NONBLOCK);
qemu_set_fd_handler(sigfd, sigfd_handler, NULL, (void *)(intptr_t)sigfd);
return 0;
}
#else /* _WIN32 */
static int qemu_signal_init(Error **errp)
{
return 0;
}
#endif
static AioContext *qemu_aio_context;
static QEMUBH *qemu_notify_bh;
static void notify_event_cb(void *opaque)
{
/* No need to do anything; this bottom half is only used to
* kick the kernel out of ppoll/poll/WaitForMultipleObjects.
*/
}
AioContext *qemu_get_aio_context(void)
{
return qemu_aio_context;
}
void qemu_notify_event(void)
{
if (!qemu_aio_context) {
return;
}
qemu_bh_schedule(qemu_notify_bh);
}
static GArray *gpollfds;
int qemu_init_main_loop(Error **errp)
{
int ret;
GSource *src;
init_clocks(qemu_timer_notify_cb);
ret = qemu_signal_init(errp);
if (ret) {
return ret;
}
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
qemu_aio_context = aio_context_new(errp);
if (!qemu_aio_context) {
return -EMFILE;
}
async: the main AioContext is only "current" if under the BQL If we want to wake up a coroutine from a worker thread, aio_co_wake() currently does not work. In that scenario, aio_co_wake() calls aio_co_enter(), but there is no current AioContext and therefore qemu_get_current_aio_context() returns the main thread. aio_co_wake() then attempts to call aio_context_acquire() instead of going through aio_co_schedule(). The default case of qemu_get_current_aio_context() was added to cover synchronous I/O started from the vCPU thread, but the main and vCPU threads are quite different. The main thread is an I/O thread itself, only running a more complicated event loop; the vCPU thread instead is essentially a worker thread that occasionally calls qemu_mutex_lock_iothread(). It is only in those critical sections that it acts as if it were the home thread of the main AioContext. Therefore, this patch detaches qemu_get_current_aio_context() from iothreads, which is a useless complication. The AioContext pointer is stored directly in the thread-local variable, including for the main loop. Worker threads (including vCPU threads) optionally behave as temporary home threads if they have taken the big QEMU lock, but if that is not the case they will always schedule coroutines on remote threads via aio_co_schedule(). With this change, the stub qemu_mutex_iothread_locked() must be changed from true to false. The previous value of true was needed because the main thread did not have an AioContext in the thread-local variable, but now it does have one. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210609122234.544153-1-pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message per Vladimir's review] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-09 14:22:34 +02:00
qemu_set_current_aio_context(qemu_aio_context);
qemu_notify_bh = qemu_bh_new(notify_event_cb, NULL);
gpollfds = g_array_new(FALSE, FALSE, sizeof(GPollFD));
src = aio_get_g_source(qemu_aio_context);
g_source_set_name(src, "aio-context");
g_source_attach(src, NULL);
g_source_unref(src);
src = iohandler_get_g_source();
g_source_set_name(src, "io-handler");
g_source_attach(src, NULL);
g_source_unref(src);
return 0;
}
static int max_priority;
#ifndef _WIN32
static int glib_pollfds_idx;
static int glib_n_poll_fds;
void qemu_fd_register(int fd)
{
}
static void glib_pollfds_fill(int64_t *cur_timeout)
{
GMainContext *context = g_main_context_default();
int timeout = 0;
int64_t timeout_ns;
int n;
g_main_context_prepare(context, &max_priority);
glib_pollfds_idx = gpollfds->len;
n = glib_n_poll_fds;
do {
GPollFD *pfds;
glib_n_poll_fds = n;
g_array_set_size(gpollfds, glib_pollfds_idx + glib_n_poll_fds);
pfds = &g_array_index(gpollfds, GPollFD, glib_pollfds_idx);
n = g_main_context_query(context, max_priority, &timeout, pfds,
glib_n_poll_fds);
} while (n != glib_n_poll_fds);
if (timeout < 0) {
timeout_ns = -1;
} else {
timeout_ns = (int64_t)timeout * (int64_t)SCALE_MS;
}
*cur_timeout = qemu_soonest_timeout(timeout_ns, *cur_timeout);
}
static void glib_pollfds_poll(void)
{
GMainContext *context = g_main_context_default();
GPollFD *pfds = &g_array_index(gpollfds, GPollFD, glib_pollfds_idx);
if (g_main_context_check(context, max_priority, pfds, glib_n_poll_fds)) {
g_main_context_dispatch(context);
}
}
#define MAX_MAIN_LOOP_SPIN (1000)
static int os_host_main_loop_wait(int64_t timeout)
{
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
GMainContext *context = g_main_context_default();
int ret;
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
g_main_context_acquire(context);
glib_pollfds_fill(&timeout);
qemu_mutex_unlock_iothread();
replay_mutex_unlock();
ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, timeout);
replay_mutex_lock();
qemu_mutex_lock_iothread();
glib_pollfds_poll();
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
g_main_context_release(context);
return ret;
}
#else
/***********************************************************/
/* Polling handling */
typedef struct PollingEntry {
PollingFunc *func;
void *opaque;
struct PollingEntry *next;
} PollingEntry;
static PollingEntry *first_polling_entry;
int qemu_add_polling_cb(PollingFunc *func, void *opaque)
{
PollingEntry **ppe, *pe;
pe = g_malloc0(sizeof(PollingEntry));
pe->func = func;
pe->opaque = opaque;
for(ppe = &first_polling_entry; *ppe != NULL; ppe = &(*ppe)->next);
*ppe = pe;
return 0;
}
void qemu_del_polling_cb(PollingFunc *func, void *opaque)
{
PollingEntry **ppe, *pe;
for(ppe = &first_polling_entry; *ppe != NULL; ppe = &(*ppe)->next) {
pe = *ppe;
if (pe->func == func && pe->opaque == opaque) {
*ppe = pe->next;
g_free(pe);
break;
}
}
}
/***********************************************************/
/* Wait objects support */
typedef struct WaitObjects {
int num;
int revents[MAXIMUM_WAIT_OBJECTS + 1];
HANDLE events[MAXIMUM_WAIT_OBJECTS + 1];
WaitObjectFunc *func[MAXIMUM_WAIT_OBJECTS + 1];
void *opaque[MAXIMUM_WAIT_OBJECTS + 1];
} WaitObjects;
static WaitObjects wait_objects = {0};
int qemu_add_wait_object(HANDLE handle, WaitObjectFunc *func, void *opaque)
{
WaitObjects *w = &wait_objects;
if (w->num >= MAXIMUM_WAIT_OBJECTS) {
return -1;
}
w->events[w->num] = handle;
w->func[w->num] = func;
w->opaque[w->num] = opaque;
w->revents[w->num] = 0;
w->num++;
return 0;
}
void qemu_del_wait_object(HANDLE handle, WaitObjectFunc *func, void *opaque)
{
int i, found;
WaitObjects *w = &wait_objects;
found = 0;
for (i = 0; i < w->num; i++) {
if (w->events[i] == handle) {
found = 1;
}
if (found) {
w->events[i] = w->events[i + 1];
w->func[i] = w->func[i + 1];
w->opaque[i] = w->opaque[i + 1];
w->revents[i] = w->revents[i + 1];
}
}
if (found) {
w->num--;
}
}
void qemu_fd_register(int fd)
{
WSAEventSelect(fd, event_notifier_get_handle(&qemu_aio_context->notifier),
FD_READ | FD_ACCEPT | FD_CLOSE |
FD_CONNECT | FD_WRITE | FD_OOB);
}
static int pollfds_fill(GArray *pollfds, fd_set *rfds, fd_set *wfds,
fd_set *xfds)
{
int nfds = -1;
int i;
for (i = 0; i < pollfds->len; i++) {
GPollFD *pfd = &g_array_index(pollfds, GPollFD, i);
int fd = pfd->fd;
int events = pfd->events;
if (events & G_IO_IN) {
FD_SET(fd, rfds);
nfds = MAX(nfds, fd);
}
if (events & G_IO_OUT) {
FD_SET(fd, wfds);
nfds = MAX(nfds, fd);
}
if (events & G_IO_PRI) {
FD_SET(fd, xfds);
nfds = MAX(nfds, fd);
}
}
return nfds;
}
static void pollfds_poll(GArray *pollfds, int nfds, fd_set *rfds,
fd_set *wfds, fd_set *xfds)
{
int i;
for (i = 0; i < pollfds->len; i++) {
GPollFD *pfd = &g_array_index(pollfds, GPollFD, i);
int fd = pfd->fd;
int revents = 0;
if (FD_ISSET(fd, rfds)) {
revents |= G_IO_IN;
}
if (FD_ISSET(fd, wfds)) {
revents |= G_IO_OUT;
}
if (FD_ISSET(fd, xfds)) {
revents |= G_IO_PRI;
}
pfd->revents = revents & pfd->events;
}
}
static int os_host_main_loop_wait(int64_t timeout)
{
GMainContext *context = g_main_context_default();
GPollFD poll_fds[1024 * 2]; /* this is probably overkill */
int select_ret = 0;
int g_poll_ret, ret, i, n_poll_fds;
PollingEntry *pe;
WaitObjects *w = &wait_objects;
gint poll_timeout;
int64_t poll_timeout_ns;
static struct timeval tv0;
fd_set rfds, wfds, xfds;
int nfds;
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
g_main_context_acquire(context);
/* XXX: need to suppress polling by better using win32 events */
ret = 0;
for (pe = first_polling_entry; pe != NULL; pe = pe->next) {
ret |= pe->func(pe->opaque);
}
if (ret != 0) {
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
g_main_context_release(context);
return ret;
}
FD_ZERO(&rfds);
FD_ZERO(&wfds);
FD_ZERO(&xfds);
nfds = pollfds_fill(gpollfds, &rfds, &wfds, &xfds);
if (nfds >= 0) {
select_ret = select(nfds + 1, &rfds, &wfds, &xfds, &tv0);
if (select_ret != 0) {
timeout = 0;
}
if (select_ret > 0) {
pollfds_poll(gpollfds, nfds, &rfds, &wfds, &xfds);
}
}
g_main_context_prepare(context, &max_priority);
n_poll_fds = g_main_context_query(context, max_priority, &poll_timeout,
poll_fds, ARRAY_SIZE(poll_fds));
g_assert(n_poll_fds + w->num <= ARRAY_SIZE(poll_fds));
for (i = 0; i < w->num; i++) {
poll_fds[n_poll_fds + i].fd = (DWORD_PTR)w->events[i];
poll_fds[n_poll_fds + i].events = G_IO_IN;
}
if (poll_timeout < 0) {
poll_timeout_ns = -1;
} else {
poll_timeout_ns = (int64_t)poll_timeout * (int64_t)SCALE_MS;
}
poll_timeout_ns = qemu_soonest_timeout(poll_timeout_ns, timeout);
qemu_mutex_unlock_iothread();
replay_mutex_unlock();
g_poll_ret = qemu_poll_ns(poll_fds, n_poll_fds + w->num, poll_timeout_ns);
replay_mutex_lock();
qemu_mutex_lock_iothread();
if (g_poll_ret > 0) {
for (i = 0; i < w->num; i++) {
w->revents[i] = poll_fds[n_poll_fds + i].revents;
}
for (i = 0; i < w->num; i++) {
if (w->revents[i] && w->func[i]) {
w->func[i](w->opaque[i]);
}
}
}
if (g_main_context_check(context, max_priority, poll_fds, n_poll_fds)) {
g_main_context_dispatch(context);
}
main-loop: Acquire main_context lock around os_host_main_loop_wait. When running virt-rescue the serial console hangs from time to time. Virt-rescue runs an ordinary Linux kernel "appliance", but there is only a single idle process running inside, so the qemu main loop is largely idle. With virt-rescue >= 1.37 you may be able to observe the hang by doing: $ virt-rescue -e ^] --scratch ><rescue> while true; do ls -l /usr/bin; done The hang in virt-rescue can be resolved by pressing a key on the serial console. Possibly with the same root cause, we also observed hangs during very early boot of regular Linux VMs with a serial console. Those hangs are extremely rare, but you may be able to observe them by running this command on baremetal for a sufficiently long time: $ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done (Check in /tmp/log that the failure was caused by a hang during early boot, and not some other reason) During investigation of this bug, Paolo Bonzini wrote: > glib is expecting QEMU to use g_main_context_acquire around accesses to > GMainContext. However QEMU is not doing that, instead it is taking its > own mutex. So we should add g_main_context_acquire and > g_main_context_release in the two implementations of > os_host_main_loop_wait; these should undo the effect of Frediano's > glib patch. This patch exactly implements Paolo's suggestion in that paragraph. This fixes the serial console hang in my testing, across 3 different physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours of automated testing. I wasn't able to reproduce the early boot hangs (but as noted above, these are extremely rare in any case). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432 Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170331205133.23906-1-rjones@redhat.com> [Paolo: this is actually a glib bug: recent glib versions are also expecting g_main_context_acquire around g_poll---but that is not documented and probably not even intended]. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-31 22:51:33 +02:00
g_main_context_release(context);
return select_ret || g_poll_ret;
}
#endif
static NotifierList main_loop_poll_notifiers =
NOTIFIER_LIST_INITIALIZER(main_loop_poll_notifiers);
void main_loop_poll_add_notifier(Notifier *notify)
{
notifier_list_add(&main_loop_poll_notifiers, notify);
}
void main_loop_poll_remove_notifier(Notifier *notify)
{
notifier_remove(notify);
}
void main_loop_wait(int nonblocking)
{
MainLoopPoll mlpoll = {
.state = MAIN_LOOP_POLL_FILL,
.timeout = UINT32_MAX,
.pollfds = gpollfds,
};
int ret;
int64_t timeout_ns;
if (nonblocking) {
mlpoll.timeout = 0;
}
/* poll any events */
g_array_set_size(gpollfds, 0); /* reset for new iteration */
/* XXX: separate device handlers from system ones */
notifier_list_notify(&main_loop_poll_notifiers, &mlpoll);
if (mlpoll.timeout == UINT32_MAX) {
timeout_ns = -1;
} else {
timeout_ns = (uint64_t)mlpoll.timeout * (int64_t)(SCALE_MS);
}
timeout_ns = qemu_soonest_timeout(timeout_ns,
timerlistgroup_deadline_ns(
&main_loop_tlg));
ret = os_host_main_loop_wait(timeout_ns);
mlpoll.state = ret < 0 ? MAIN_LOOP_POLL_ERR : MAIN_LOOP_POLL_OK;
notifier_list_notify(&main_loop_poll_notifiers, &mlpoll);
if (icount_enabled()) {
/*
* CPU thread can infinitely wait for event after
* missing the warp
*/
icount_start_warp_timer();
}
qemu_clock_run_all_timers();
}
/* Functions to operate on the main QEMU AioContext. */
QEMUBH *qemu_bh_new_full(QEMUBHFunc *cb, void *opaque, const char *name)
{
return aio_bh_new_full(qemu_aio_context, cb, opaque, name);
}
/*
* Functions to operate on the I/O handler AioContext.
* This context runs on top of main loop. We can't reuse qemu_aio_context
* because iohandlers mustn't be polled by aio_poll(qemu_aio_context).
*/
static AioContext *iohandler_ctx;
static void iohandler_init(void)
{
if (!iohandler_ctx) {
iohandler_ctx = aio_context_new(&error_abort);
}
}
AioContext *iohandler_get_aio_context(void)
{
iohandler_init();
return iohandler_ctx;
}
GSource *iohandler_get_g_source(void)
{
iohandler_init();
return aio_get_g_source(iohandler_ctx);
}
void qemu_set_fd_handler(int fd,
IOHandler *fd_read,
IOHandler *fd_write,
void *opaque)
{
iohandler_init();
aio_set_fd_handler(iohandler_ctx, fd, false,
fd_read, fd_write, NULL, opaque);
}
void event_notifier_set_handler(EventNotifier *e,
EventNotifierHandler *handler)
{
iohandler_init();
aio_set_event_notifier(iohandler_ctx, e, false,
handler, NULL);
}