qemu-e2k/hw/usb/dev-storage.c

798 lines
22 KiB
C
Raw Normal View History

/*
* USB Mass Storage Device emulation
*
* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the LGPL.
*/
#include "qemu-common.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "hw/usb.h"
#include "hw/usb/desc.h"
#include "hw/scsi/scsi.h"
#include "ui/console.h"
#include "monitor/monitor.h"
#include "sysemu/sysemu.h"
#include "sysemu/blockdev.h"
//#define DEBUG_MSD
#ifdef DEBUG_MSD
#define DPRINTF(fmt, ...) \
do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...) do {} while(0)
#endif
/* USB requests. */
#define MassStorageReset 0xff
#define GetMaxLun 0xfe
enum USBMSDMode {
USB_MSDM_CBW, /* Command Block. */
USB_MSDM_DATAOUT, /* Transfer data to device. */
USB_MSDM_DATAIN, /* Transfer data from device. */
USB_MSDM_CSW /* Command Status. */
};
struct usb_msd_csw {
uint32_t sig;
uint32_t tag;
uint32_t residue;
uint8_t status;
};
typedef struct {
USBDevice dev;
enum USBMSDMode mode;
uint32_t scsi_off;
uint32_t scsi_len;
uint32_t data_len;
struct usb_msd_csw csw;
SCSIRequest *req;
SCSIBus bus;
/* For async completion. */
USBPacket *packet;
/* usb-storage only */
block: add topology qdev properties Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 23:37:09 +01:00
BlockConf conf;
char *serial;
uint32_t removable;
} MSDState;
struct usb_msd_cbw {
uint32_t sig;
uint32_t tag;
uint32_t data_len;
uint8_t flags;
uint8_t lun;
uint8_t cmd_len;
uint8_t cmd[16];
};
enum {
STR_MANUFACTURER = 1,
STR_PRODUCT,
STR_SERIALNUMBER,
STR_CONFIG_FULL,
STR_CONFIG_HIGH,
STR_CONFIG_SUPER,
};
static const USBDescStrings desc_strings = {
[STR_MANUFACTURER] = "QEMU",
[STR_PRODUCT] = "QEMU USB HARDDRIVE",
[STR_SERIALNUMBER] = "1",
[STR_CONFIG_FULL] = "Full speed config (usb 1.1)",
[STR_CONFIG_HIGH] = "High speed config (usb 2.0)",
[STR_CONFIG_SUPER] = "Super speed config (usb 3.0)",
};
static const USBDescIface desc_iface_full = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 64,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 64,
},
}
};
static const USBDescDevice desc_device_full = {
.bcdUSB = 0x0200,
.bMaxPacketSize0 = 8,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_FULL,
.bmAttributes = 0xc0,
.nif = 1,
.ifs = &desc_iface_full,
},
},
};
static const USBDescIface desc_iface_high = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 512,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 512,
},
}
};
static const USBDescDevice desc_device_high = {
.bcdUSB = 0x0200,
.bMaxPacketSize0 = 64,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_HIGH,
.bmAttributes = 0xc0,
.nif = 1,
.ifs = &desc_iface_high,
},
},
};
static const USBDescIface desc_iface_super = {
.bInterfaceNumber = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = 0x06, /* SCSI */
.bInterfaceProtocol = 0x50, /* Bulk */
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 1024,
.bMaxBurst = 15,
},{
.bEndpointAddress = USB_DIR_OUT | 0x02,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = 1024,
.bMaxBurst = 15,
},
}
};
static const USBDescDevice desc_device_super = {
.bcdUSB = 0x0300,
.bMaxPacketSize0 = 9,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = STR_CONFIG_SUPER,
.bmAttributes = 0xc0,
.nif = 1,
.ifs = &desc_iface_super,
},
},
};
static const USBDesc desc = {
.id = {
.idVendor = 0x46f4, /* CRC16() of "QEMU" */
.idProduct = 0x0001,
.bcdDevice = 0,
.iManufacturer = STR_MANUFACTURER,
.iProduct = STR_PRODUCT,
.iSerialNumber = STR_SERIALNUMBER,
},
.full = &desc_device_full,
.high = &desc_device_high,
.super = &desc_device_super,
.str = desc_strings,
};
static void usb_msd_copy_data(MSDState *s, USBPacket *p)
{
uint32_t len;
len = p->iov.size - p->actual_length;
if (len > s->scsi_len)
len = s->scsi_len;
usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len);
s->scsi_len -= len;
s->scsi_off += len;
s->data_len -= len;
if (s->scsi_len == 0 || s->data_len == 0) {
scsi_req_continue(s->req);
}
}
static void usb_msd_send_status(MSDState *s, USBPacket *p)
{
int len;
DPRINTF("Command status %d tag 0x%x, len %zd\n",
s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
assert(s->csw.sig == cpu_to_le32(0x53425355));
len = MIN(sizeof(s->csw), p->iov.size);
usb_packet_copy(p, &s->csw, len);
memset(&s->csw, 0, sizeof(s->csw));
}
static void usb_msd_packet_complete(MSDState *s)
{
USBPacket *p = s->packet;
/* Set s->packet to NULL before calling usb_packet_complete
because another request may be issued before
usb_packet_complete returns. */
DPRINTF("Packet complete %p\n", p);
s->packet = NULL;
usb_packet_complete(&s->dev, p);
}
static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
USBPacket *p = s->packet;
assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
s->scsi_len = len;
s->scsi_off = 0;
if (p) {
usb_msd_copy_data(s, p);
p = s->packet;
if (p && p->actual_length == p->iov.size) {
p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
usb_msd_packet_complete(s);
}
}
}
static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t resid)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
USBPacket *p = s->packet;
DPRINTF("Command complete %d tag 0x%x\n", status, req->tag);
s->csw.sig = cpu_to_le32(0x53425355);
s->csw.tag = cpu_to_le32(req->tag);
s->csw.residue = cpu_to_le32(s->data_len);
s->csw.status = status != 0;
if (s->packet) {
if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
/* A deferred packet with no write data remaining must be
the status read packet. */
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
} else if (s->mode == USB_MSDM_CSW) {
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
} else {
if (s->data_len) {
int len = (p->iov.size - p->actual_length);
usb_packet_skip(p, len);
s->data_len -= len;
}
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
usb_msd_packet_complete(s);
} else if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
scsi_req_unref(req);
s->req = NULL;
}
static void usb_msd_request_cancelled(SCSIRequest *req)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
if (req == s->req) {
scsi_req_unref(s->req);
s->req = NULL;
s->scsi_len = 0;
}
}
static void usb_msd_handle_reset(USBDevice *dev)
{
MSDState *s = (MSDState *)dev;
DPRINTF("Reset\n");
if (s->req) {
scsi_req_cancel(s->req);
}
assert(s->req == NULL);
if (s->packet) {
s->packet->status = USB_RET_STALL;
usb_msd_packet_complete(s);
}
s->mode = USB_MSDM_CBW;
}
static void usb_msd_handle_control(USBDevice *dev, USBPacket *p,
int request, int value, int index, int length, uint8_t *data)
{
MSDState *s = (MSDState *)dev;
SCSIDevice *scsi_dev;
int ret, maxlun;
ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return;
}
switch (request) {
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
break;
/* Class specific requests. */
case ClassInterfaceOutRequest | MassStorageReset:
/* Reset state ready for the next CBW. */
s->mode = USB_MSDM_CBW;
break;
case ClassInterfaceRequest | GetMaxLun:
maxlun = 0;
for (;;) {
scsi_dev = scsi_device_find(&s->bus, 0, 0, maxlun+1);
if (scsi_dev == NULL) {
break;
}
if (scsi_dev->lun != maxlun+1) {
break;
}
maxlun++;
}
DPRINTF("MaxLun %d\n", maxlun);
data[0] = maxlun;
p->actual_length = 1;
break;
default:
p->status = USB_RET_STALL;
break;
}
}
static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
{
MSDState *s = DO_UPCAST(MSDState, dev, dev);
assert(s->packet == p);
s->packet = NULL;
if (s->req) {
scsi_req_cancel(s->req);
}
}
static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
{
MSDState *s = (MSDState *)dev;
uint32_t tag;
struct usb_msd_cbw cbw;
uint8_t devep = p->ep->nr;
SCSIDevice *scsi_dev;
uint32_t len;
switch (p->pid) {
case USB_TOKEN_OUT:
if (devep != 2)
goto fail;
switch (s->mode) {
case USB_MSDM_CBW:
if (p->iov.size != 31) {
fprintf(stderr, "usb-msd: Bad CBW size");
goto fail;
}
usb_packet_copy(p, &cbw, 31);
if (le32_to_cpu(cbw.sig) != 0x43425355) {
fprintf(stderr, "usb-msd: Bad signature %08x\n",
le32_to_cpu(cbw.sig));
goto fail;
}
DPRINTF("Command on LUN %d\n", cbw.lun);
scsi_dev = scsi_device_find(&s->bus, 0, 0, cbw.lun);
if (scsi_dev == NULL) {
fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
goto fail;
}
tag = le32_to_cpu(cbw.tag);
s->data_len = le32_to_cpu(cbw.data_len);
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
} else if (cbw.flags & 0x80) {
s->mode = USB_MSDM_DATAIN;
} else {
s->mode = USB_MSDM_DATAOUT;
}
DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
tag, cbw.flags, cbw.cmd_len, s->data_len);
assert(le32_to_cpu(s->csw.residue) == 0);
s->scsi_len = 0;
s->req = scsi_req_new(scsi_dev, tag, cbw.lun, cbw.cmd, NULL);
#ifdef DEBUG_MSD
scsi_req_print(s->req);
#endif
len = scsi_req_enqueue(s->req);
if (len) {
scsi_req_continue(s->req);
}
break;
case USB_MSDM_DATAOUT:
DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
if (p->iov.size > s->data_len) {
goto fail;
}
if (s->scsi_len) {
usb_msd_copy_data(s, p);
}
if (le32_to_cpu(s->csw.residue)) {
int len = p->iov.size - p->actual_length;
if (len) {
usb_packet_skip(p, len);
s->data_len -= len;
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
}
if (p->actual_length < p->iov.size) {
DPRINTF("Deferring packet %p [wait data-out]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
}
break;
default:
DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
goto fail;
}
break;
case USB_TOKEN_IN:
if (devep != 1)
goto fail;
switch (s->mode) {
case USB_MSDM_DATAOUT:
if (s->data_len != 0 || p->iov.size < 13) {
goto fail;
}
/* Waiting for SCSI write to complete. */
s->packet = p;
p->status = USB_RET_ASYNC;
break;
case USB_MSDM_CSW:
if (p->iov.size < 13) {
goto fail;
}
if (s->req) {
/* still in flight */
DPRINTF("Deferring packet %p [wait status]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
} else {
usb_msd_send_status(s, p);
s->mode = USB_MSDM_CBW;
}
break;
case USB_MSDM_DATAIN:
DPRINTF("Data in %zd/%d, scsi_len %d\n",
p->iov.size, s->data_len, s->scsi_len);
if (s->scsi_len) {
usb_msd_copy_data(s, p);
}
if (le32_to_cpu(s->csw.residue)) {
int len = p->iov.size - p->actual_length;
if (len) {
usb_packet_skip(p, len);
s->data_len -= len;
if (s->data_len == 0) {
s->mode = USB_MSDM_CSW;
}
}
}
if (p->actual_length < p->iov.size) {
DPRINTF("Deferring packet %p [wait data-in]\n", p);
s->packet = p;
p->status = USB_RET_ASYNC;
}
break;
default:
DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
goto fail;
}
break;
default:
DPRINTF("Bad token\n");
fail:
p->status = USB_RET_STALL;
break;
}
}
static void usb_msd_password_cb(void *opaque, int err)
{
MSDState *s = opaque;
if (!err)
err = usb_device_attach(&s->dev);
if (err)
qdev_unplug(&s->dev.qdev, NULL);
}
static void *usb_msd_load_request(QEMUFile *f, SCSIRequest *req)
{
MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
/* nothing to load, just store req in our state struct */
assert(s->req == NULL);
scsi_req_ref(req);
s->req = req;
return NULL;
}
static const struct SCSIBusInfo usb_msd_scsi_info_storage = {
.tcq = false,
.max_target = 0,
.max_lun = 0,
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
.cancel = usb_msd_request_cancelled,
.load_request = usb_msd_load_request,
};
static const struct SCSIBusInfo usb_msd_scsi_info_bot = {
.tcq = false,
.max_target = 0,
.max_lun = 15,
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
.cancel = usb_msd_request_cancelled,
.load_request = usb_msd_load_request,
};
static int usb_msd_initfn_storage(USBDevice *dev)
{
MSDState *s = DO_UPCAST(MSDState, dev, dev);
BlockDriverState *bs = s->conf.bs;
SCSIDevice *scsi_dev;
if (!bs) {
error_report("drive property not set");
return -1;
}
blkconf_serial(&s->conf, &s->serial);
/*
* Hack alert: this pretends to be a block device, but it's really
* a SCSI bus that can serve only a single device, which it
* creates automatically. But first it needs to detach from its
* blockdev, or else scsi_bus_legacy_add_drive() dies when it
* attaches again.
*
* The hack is probably a bad idea.
*/
bdrv_detach_dev(bs, &s->dev.qdev);
s->conf.bs = NULL;
if (s->serial) {
usb_desc_set_string(dev, STR_SERIALNUMBER, s->serial);
} else {
usb_desc_create_serial(dev);
}
usb_desc_init(dev);
scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info_storage);
scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable,
s->conf.bootindex, s->serial);
if (!scsi_dev) {
return -1;
}
s->bus.qbus.allow_hotplug = 0;
usb_msd_handle_reset(dev);
if (bdrv_key_required(bs)) {
if (cur_mon) {
monitor_read_bdrv_key_start(cur_mon, bs, usb_msd_password_cb, s);
s->dev.auto_attach = 0;
} else {
autostart = 0;
}
}
return 0;
}
static int usb_msd_initfn_bot(USBDevice *dev)
{
MSDState *s = DO_UPCAST(MSDState, dev, dev);
usb_desc_create_serial(dev);
usb_desc_init(dev);
scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info_bot);
s->bus.qbus.allow_hotplug = 0;
usb_msd_handle_reset(dev);
return 0;
}
static USBDevice *usb_msd_init(USBBus *bus, const char *filename)
{
static int nr=0;
char id[8];
QemuOpts *opts;
DriveInfo *dinfo;
USBDevice *dev;
const char *p1;
char fmt[32];
/* parse -usbdevice disk: syntax into drive opts */
snprintf(id, sizeof(id), "usb%d", nr++);
opts = qemu_opts_create(qemu_find_opts("drive"), id, 0, NULL);
p1 = strchr(filename, ':');
if (p1++) {
const char *p2;
if (strstart(filename, "format=", &p2)) {
int len = MIN(p1 - p2, sizeof(fmt));
pstrcpy(fmt, len, p2);
qemu_opt_set(opts, "format", fmt);
} else if (*filename != ':') {
printf("unrecognized USB mass-storage option %s\n", filename);
return NULL;
}
filename = p1;
}
if (!*filename) {
printf("block device specification needed\n");
return NULL;
}
qemu_opt_set(opts, "file", filename);
qemu_opt_set(opts, "if", "none");
/* create host drive */
dinfo = drive_init(opts, 0);
if (!dinfo) {
qemu_opts_del(opts);
return NULL;
}
/* create guest device */
dev = usb_create(bus, "usb-storage");
if (!dev) {
return NULL;
}
if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
qdev_free(&dev->qdev);
return NULL;
}
if (qdev_init(&dev->qdev) < 0)
return NULL;
return dev;
}
static const VMStateDescription vmstate_usb_msd = {
.name = "usb-storage",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField []) {
VMSTATE_USB_DEVICE(dev, MSDState),
VMSTATE_UINT32(mode, MSDState),
VMSTATE_UINT32(scsi_len, MSDState),
VMSTATE_UINT32(scsi_off, MSDState),
VMSTATE_UINT32(data_len, MSDState),
VMSTATE_UINT32(csw.sig, MSDState),
VMSTATE_UINT32(csw.tag, MSDState),
VMSTATE_UINT32(csw.residue, MSDState),
VMSTATE_UINT8(csw.status, MSDState),
VMSTATE_END_OF_LIST()
}
};
static Property msd_properties[] = {
DEFINE_BLOCK_PROPERTIES(MSDState, conf),
DEFINE_PROP_STRING("serial", MSDState, serial),
DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
DEFINE_PROP_END_OF_LIST(),
};
static void usb_msd_class_initfn_common(ObjectClass *klass)
{
DeviceClass *dc = DEVICE_CLASS(klass);
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->product_desc = "QEMU USB MSD";
uc->usb_desc = &desc;
uc->cancel_packet = usb_msd_cancel_io;
uc->handle_attach = usb_desc_attach;
uc->handle_reset = usb_msd_handle_reset;
uc->handle_control = usb_msd_handle_control;
uc->handle_data = usb_msd_handle_data;
dc->fw_name = "storage";
dc->vmsd = &vmstate_usb_msd;
}
static void usb_msd_class_initfn_storage(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->init = usb_msd_initfn_storage;
dc->props = msd_properties;
usb_msd_class_initfn_common(klass);
}
static void usb_msd_class_initfn_bot(ObjectClass *klass, void *data)
{
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->init = usb_msd_initfn_bot;
usb_msd_class_initfn_common(klass);
}
static const TypeInfo msd_info = {
.name = "usb-storage",
.parent = TYPE_USB_DEVICE,
.instance_size = sizeof(MSDState),
.class_init = usb_msd_class_initfn_storage,
};
static const TypeInfo bot_info = {
.name = "usb-bot",
.parent = TYPE_USB_DEVICE,
.instance_size = sizeof(MSDState),
.class_init = usb_msd_class_initfn_bot,
};
static void usb_msd_register_types(void)
{
type_register_static(&msd_info);
type_register_static(&bot_info);
usb_legacy_register("usb-storage", "disk", usb_msd_init);
}
type_init(usb_msd_register_types)