qemu-e2k/hw/display/cg3.c

397 lines
11 KiB
C
Raw Normal View History

/*
* QEMU CG3 Frame buffer
*
* Copyright (c) 2012 Bob Breuer
* Copyright (c) 2013 Mark Cave-Ayland
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/datadir.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "ui/console.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/loader.h"
#include "hw/qdev-properties.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
#include "qom/object.h"
/* Change to 1 to enable debugging */
#define DEBUG_CG3 0
#define CG3_ROM_FILE "QEMU,cgthree.bin"
#define FCODE_MAX_ROM_SIZE 0x10000
#define CG3_REG_SIZE 0x20
#define CG3_REG_BT458_ADDR 0x0
#define CG3_REG_BT458_COLMAP 0x4
#define CG3_REG_FBC_CTRL 0x10
#define CG3_REG_FBC_STATUS 0x11
#define CG3_REG_FBC_CURSTART 0x12
#define CG3_REG_FBC_CUREND 0x13
#define CG3_REG_FBC_VCTRL 0x14
/* Control register flags */
#define CG3_CR_ENABLE_INTS 0x80
/* Status register flags */
#define CG3_SR_PENDING_INT 0x80
#define CG3_SR_1152_900_76_B 0x60
#define CG3_SR_ID_COLOR 0x01
#define CG3_VRAM_SIZE 0x100000
#define CG3_VRAM_OFFSET 0x800000
#define TYPE_CG3 "cgthree"
OBJECT_DECLARE_SIMPLE_TYPE(CG3State, CG3)
struct CG3State {
SysBusDevice parent_obj;
QemuConsole *con;
qemu_irq irq;
hwaddr prom_addr;
MemoryRegion vram_mem;
MemoryRegion rom;
MemoryRegion reg;
uint32_t vram_size;
int full_update;
uint8_t regs[16];
uint8_t r[256], g[256], b[256];
uint16_t width, height, depth;
uint8_t dac_index, dac_state;
};
static void cg3_update_display(void *opaque)
{
CG3State *s = opaque;
DisplaySurface *surface = qemu_console_surface(s->con);
const uint8_t *pix;
uint32_t *data;
uint32_t dval;
int x, y, y_start;
unsigned int width, height;
ram_addr_t page;
DirtyBitmapSnapshot *snap = NULL;
if (surface_bits_per_pixel(surface) != 32) {
return;
}
width = s->width;
height = s->height;
y_start = -1;
pix = memory_region_get_ram_ptr(&s->vram_mem);
data = (uint32_t *)surface_data(surface);
if (!s->full_update) {
snap = memory_region_snapshot_and_clear_dirty(&s->vram_mem, 0x0,
memory_region_size(&s->vram_mem),
DIRTY_MEMORY_VGA);
}
for (y = 0; y < height; y++) {
int update;
page = (ram_addr_t)y * width;
if (s->full_update) {
update = 1;
} else {
update = memory_region_snapshot_get_dirty(&s->vram_mem, snap, page,
width);
}
if (update) {
if (y_start < 0) {
y_start = y;
}
for (x = 0; x < width; x++) {
dval = *pix++;
dval = (s->r[dval] << 16) | (s->g[dval] << 8) | s->b[dval];
*data++ = dval;
}
} else {
if (y_start >= 0) {
dpy_gfx_update(s->con, 0, y_start, width, y - y_start);
y_start = -1;
}
pix += width;
data += width;
}
}
s->full_update = 0;
if (y_start >= 0) {
dpy_gfx_update(s->con, 0, y_start, width, y - y_start);
}
/* vsync interrupt? */
if (s->regs[0] & CG3_CR_ENABLE_INTS) {
s->regs[1] |= CG3_SR_PENDING_INT;
qemu_irq_raise(s->irq);
}
g_free(snap);
}
static void cg3_invalidate_display(void *opaque)
{
CG3State *s = opaque;
memory_region_set_dirty(&s->vram_mem, 0, CG3_VRAM_SIZE);
}
static uint64_t cg3_reg_read(void *opaque, hwaddr addr, unsigned size)
{
CG3State *s = opaque;
int val;
switch (addr) {
case CG3_REG_BT458_ADDR:
case CG3_REG_BT458_COLMAP:
val = 0;
break;
case CG3_REG_FBC_CTRL:
val = s->regs[0];
break;
case CG3_REG_FBC_STATUS:
/* monitor ID 6, board type = 1 (color) */
val = s->regs[1] | CG3_SR_1152_900_76_B | CG3_SR_ID_COLOR;
break;
case CG3_REG_FBC_CURSTART ... CG3_REG_SIZE - 1:
val = s->regs[addr - 0x10];
break;
default:
qemu_log_mask(LOG_UNIMP,
"cg3: Unimplemented register read "
"reg 0x%" HWADDR_PRIx " size 0x%x\n",
addr, size);
val = 0;
break;
}
trace_cg3_read(addr, val, size);
return val;
}
static void cg3_reg_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
CG3State *s = opaque;
uint8_t regval;
int i;
trace_cg3_write(addr, val, size);
switch (addr) {
case CG3_REG_BT458_ADDR:
s->dac_index = val;
s->dac_state = 0;
break;
case CG3_REG_BT458_COLMAP:
/* This register can be written to as either a long word or a byte */
if (size == 1) {
val <<= 24;
}
for (i = 0; i < size; i++) {
regval = val >> 24;
switch (s->dac_state) {
case 0:
s->r[s->dac_index] = regval;
s->dac_state++;
break;
case 1:
s->g[s->dac_index] = regval;
s->dac_state++;
break;
case 2:
s->b[s->dac_index] = regval;
/* Index autoincrement */
s->dac_index = (s->dac_index + 1) & 0xff;
/* fall through */
default:
s->dac_state = 0;
break;
}
val <<= 8;
}
s->full_update = 1;
break;
case CG3_REG_FBC_CTRL:
s->regs[0] = val;
break;
case CG3_REG_FBC_STATUS:
if (s->regs[1] & CG3_SR_PENDING_INT) {
/* clear interrupt */
s->regs[1] &= ~CG3_SR_PENDING_INT;
qemu_irq_lower(s->irq);
}
break;
case CG3_REG_FBC_CURSTART ... CG3_REG_SIZE - 1:
s->regs[addr - 0x10] = val;
break;
default:
qemu_log_mask(LOG_UNIMP,
"cg3: Unimplemented register write "
"reg 0x%" HWADDR_PRIx " size 0x%x value 0x%" PRIx64 "\n",
addr, size, val);
break;
}
}
static const MemoryRegionOps cg3_reg_ops = {
.read = cg3_reg_read,
.write = cg3_reg_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 4,
},
};
static const GraphicHwOps cg3_ops = {
.invalidate = cg3_invalidate_display,
.gfx_update = cg3_update_display,
};
static void cg3_initfn(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
CG3State *s = CG3(obj);
memory_region_init_rom_nomigrate(&s->rom, obj, "cg3.prom",
FCODE_MAX_ROM_SIZE, &error_fatal);
sysbus_init_mmio(sbd, &s->rom);
memory_region_init_io(&s->reg, obj, &cg3_reg_ops, s, "cg3.reg",
CG3_REG_SIZE);
sysbus_init_mmio(sbd, &s->reg);
}
static void cg3_realizefn(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
CG3State *s = CG3(dev);
int ret;
char *fcode_filename;
/* FCode ROM */
vmstate_register_ram_global(&s->rom);
fcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, CG3_ROM_FILE);
if (fcode_filename) {
ret = load_image_mr(fcode_filename, &s->rom);
g_free(fcode_filename);
if (ret < 0 || ret > FCODE_MAX_ROM_SIZE) {
warn_report("cg3: could not load prom '%s'", CG3_ROM_FILE);
}
}
memory_region_init_ram(&s->vram_mem, NULL, "cg3.vram", s->vram_size,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 16:51:43 +02:00
&error_fatal);
memory_region_set_log(&s->vram_mem, true, DIRTY_MEMORY_VGA);
sysbus_init_mmio(sbd, &s->vram_mem);
sysbus_init_irq(sbd, &s->irq);
s->con = graphic_console_init(dev, 0, &cg3_ops, s);
qemu_console_resize(s->con, s->width, s->height);
}
static int vmstate_cg3_post_load(void *opaque, int version_id)
{
CG3State *s = opaque;
cg3_invalidate_display(s);
return 0;
}
static const VMStateDescription vmstate_cg3 = {
.name = "cg3",
.version_id = 1,
.minimum_version_id = 1,
.post_load = vmstate_cg3_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT16(height, CG3State),
VMSTATE_UINT16(width, CG3State),
VMSTATE_UINT16(depth, CG3State),
VMSTATE_BUFFER(r, CG3State),
VMSTATE_BUFFER(g, CG3State),
VMSTATE_BUFFER(b, CG3State),
VMSTATE_UINT8(dac_index, CG3State),
VMSTATE_UINT8(dac_state, CG3State),
VMSTATE_END_OF_LIST()
}
};
static void cg3_reset(DeviceState *d)
{
CG3State *s = CG3(d);
/* Initialize palette */
memset(s->r, 0, 256);
memset(s->g, 0, 256);
memset(s->b, 0, 256);
s->dac_state = 0;
s->full_update = 1;
qemu_irq_lower(s->irq);
}
static Property cg3_properties[] = {
DEFINE_PROP_UINT32("vram-size", CG3State, vram_size, -1),
DEFINE_PROP_UINT16("width", CG3State, width, -1),
DEFINE_PROP_UINT16("height", CG3State, height, -1),
DEFINE_PROP_UINT16("depth", CG3State, depth, -1),
DEFINE_PROP_END_OF_LIST(),
};
static void cg3_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = cg3_realizefn;
dc->reset = cg3_reset;
dc->vmsd = &vmstate_cg3;
device_class_set_props(dc, cg3_properties);
}
static const TypeInfo cg3_info = {
.name = TYPE_CG3,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(CG3State),
.instance_init = cg3_initfn,
.class_init = cg3_class_init,
};
static void cg3_register_types(void)
{
type_register_static(&cg3_info);
}
type_init(cg3_register_types)