qemu-e2k/hw/arm/exynos4210.c

407 lines
15 KiB
C
Raw Normal View History

/*
* Samsung exynos4210 SoC emulation
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
* Maksim Kozlov <m.kozlov@samsung.com>
* Evgeny Voevodin <e.voevodin@samsung.com>
* Igor Mitsyanko <i.mitsyanko@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "qemu/log.h"
#include "cpu.h"
#include "hw/cpu/a9mpcore.h"
#include "hw/boards.h"
#include "sysemu/sysemu.h"
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/loader.h"
#include "hw/arm/exynos4210.h"
#include "hw/sd/sdhci.h"
#include "hw/usb/hcd-ehci.h"
#define EXYNOS4210_CHIPID_ADDR 0x10000000
/* PWM */
#define EXYNOS4210_PWM_BASE_ADDR 0x139D0000
/* RTC */
#define EXYNOS4210_RTC_BASE_ADDR 0x10070000
/* MCT */
#define EXYNOS4210_MCT_BASE_ADDR 0x10050000
/* I2C */
#define EXYNOS4210_I2C_SHIFT 0x00010000
#define EXYNOS4210_I2C_BASE_ADDR 0x13860000
/* Interrupt Group of External Interrupt Combiner for I2C */
#define EXYNOS4210_I2C_INTG 27
#define EXYNOS4210_HDMI_INTG 16
/* UART's definitions */
#define EXYNOS4210_UART0_BASE_ADDR 0x13800000
#define EXYNOS4210_UART1_BASE_ADDR 0x13810000
#define EXYNOS4210_UART2_BASE_ADDR 0x13820000
#define EXYNOS4210_UART3_BASE_ADDR 0x13830000
#define EXYNOS4210_UART0_FIFO_SIZE 256
#define EXYNOS4210_UART1_FIFO_SIZE 64
#define EXYNOS4210_UART2_FIFO_SIZE 16
#define EXYNOS4210_UART3_FIFO_SIZE 16
/* Interrupt Group of External Interrupt Combiner for UART */
#define EXYNOS4210_UART_INT_GRP 26
/* External GIC */
#define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000
#define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000
/* Combiner */
#define EXYNOS4210_EXT_COMBINER_BASE_ADDR 0x10440000
#define EXYNOS4210_INT_COMBINER_BASE_ADDR 0x10448000
/* SD/MMC host controllers */
#define EXYNOS4210_SDHCI_CAPABILITIES 0x05E80080
#define EXYNOS4210_SDHCI_BASE_ADDR 0x12510000
#define EXYNOS4210_SDHCI_ADDR(n) (EXYNOS4210_SDHCI_BASE_ADDR + \
0x00010000 * (n))
#define EXYNOS4210_SDHCI_NUMBER 4
/* PMU SFR base address */
#define EXYNOS4210_PMU_BASE_ADDR 0x10020000
/* Clock controller SFR base address */
#define EXYNOS4210_CLK_BASE_ADDR 0x10030000
/* PRNG/HASH SFR base address */
#define EXYNOS4210_RNG_BASE_ADDR 0x10830400
/* Display controllers (FIMD) */
#define EXYNOS4210_FIMD0_BASE_ADDR 0x11C00000
/* EHCI */
#define EXYNOS4210_EHCI_BASE_ADDR 0x12580000
static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
0x09, 0x00, 0x00, 0x00 };
static uint64_t exynos4210_chipid_and_omr_read(void *opaque, hwaddr offset,
unsigned size)
{
assert(offset < sizeof(chipid_and_omr));
return chipid_and_omr[offset];
}
static void exynos4210_chipid_and_omr_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
return;
}
static const MemoryRegionOps exynos4210_chipid_and_omr_ops = {
.read = exynos4210_chipid_and_omr_read,
.write = exynos4210_chipid_and_omr_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.impl = {
.max_access_size = 1,
}
};
void exynos4210_write_secondary(ARMCPU *cpu,
const struct arm_boot_info *info)
{
int n;
uint32_t smpboot[] = {
0xe59f3034, /* ldr r3, External gic_cpu_if */
0xe59f2034, /* ldr r2, Internal gic_cpu_if */
0xe59f0034, /* ldr r0, startaddr */
0xe3a01001, /* mov r1, #1 */
0xe5821000, /* str r1, [r2] */
0xe5831000, /* str r1, [r3] */
0xe3a010ff, /* mov r1, #0xff */
0xe5821004, /* str r1, [r2, #4] */
0xe5831004, /* str r1, [r3, #4] */
0xf57ff04f, /* dsb */
0xe320f003, /* wfi */
0xe5901000, /* ldr r1, [r0] */
0xe1110001, /* tst r1, r1 */
0x0afffffb, /* beq <wfi> */
0xe12fff11, /* bx r1 */
EXYNOS4210_EXT_GIC_CPU_BASE_ADDR,
0, /* gic_cpu_if: base address of Internal GIC CPU interface */
0 /* bootreg: Boot register address is held here */
};
smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr;
smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr;
for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
smpboot[n] = tswap32(smpboot[n]);
}
rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
info->smp_loader_start);
}
static uint64_t exynos4210_calc_affinity(int cpu)
{
uint64_t mp_affinity;
/* Exynos4210 has 0x9 as cluster ID */
mp_affinity = (0x9 << ARM_AFF1_SHIFT) | cpu;
return mp_affinity;
}
Exynos4210State *exynos4210_init(MemoryRegion *system_mem)
{
Exynos4210State *s = g_new(Exynos4210State, 1);
qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
SysBusDevice *busdev;
DeviceState *dev;
int i, n;
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 18:04:57 +02:00
Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9"));
/* By default A9 CPUs have EL3 enabled. This board does not currently
* support EL3 so the CPU EL3 property is disabled before realization.
*/
if (object_property_find(cpuobj, "has_el3", NULL)) {
object_property_set_bool(cpuobj, false, "has_el3", &error_fatal);
}
s->cpu[n] = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, exynos4210_calc_affinity(n),
"mp-affinity", &error_abort);
object_property_set_int(cpuobj, EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
"reset-cbar", &error_abort);
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
}
/*** IRQs ***/
s->irq_table = exynos4210_init_irq(&s->irqs);
/* IRQ Gate */
for (i = 0; i < EXYNOS4210_NCPUS; i++) {
dev = qdev_create(NULL, "exynos4210.irq_gate");
qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
qdev_init_nofail(dev);
/* Get IRQ Gate input in gate_irq */
for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
gate_irq[i][n] = qdev_get_gpio_in(dev, n);
}
busdev = SYS_BUS_DEVICE(dev);
/* Connect IRQ Gate output to CPU's IRQ line */
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
}
/* Private memory region and Internal GIC */
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][0]);
}
for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Cache controller */
sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
/* External GIC */
dev = qdev_create(NULL, "exynos4210.gic");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
/* Map CPU interface */
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
/* Map Distributer interface */
sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][1]);
}
for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Internal Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
/* External Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_prop_set_uint32(dev, "external", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
/* Initialize board IRQs. */
exynos4210_init_board_irqs(&s->irqs);
/*** Memory ***/
/* Chip-ID and OMR */
memory_region_init_io(&s->chipid_mem, NULL, &exynos4210_chipid_and_omr_ops,
NULL, "exynos4210.chipid", sizeof(chipid_and_omr));
memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
&s->chipid_mem);
/* Internal ROM */
memory_region_init_ram(&s->irom_mem, NULL, "exynos4210.irom",
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 16:51:43 +02:00
EXYNOS4210_IROM_SIZE, &error_fatal);
memory_region_set_readonly(&s->irom_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
&s->irom_mem);
/* mirror of iROM */
memory_region_init_alias(&s->irom_alias_mem, NULL, "exynos4210.irom_alias",
&s->irom_mem,
0,
EXYNOS4210_IROM_SIZE);
memory_region_set_readonly(&s->irom_alias_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
&s->irom_alias_mem);
/* Internal RAM */
memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 16:51:43 +02:00
EXYNOS4210_IRAM_SIZE, &error_fatal);
memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
&s->iram_mem);
/* PMU.
* The only reason of existence at the moment is that secondary CPU boot
* loader uses PMU INFORM5 register as a holding pen.
*/
sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL);
sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL);
/* PWM */
sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
s->irq_table[exynos4210_get_irq(22, 0)],
s->irq_table[exynos4210_get_irq(22, 1)],
s->irq_table[exynos4210_get_irq(22, 2)],
s->irq_table[exynos4210_get_irq(22, 3)],
s->irq_table[exynos4210_get_irq(22, 4)],
NULL);
/* RTC */
sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
s->irq_table[exynos4210_get_irq(23, 0)],
s->irq_table[exynos4210_get_irq(23, 1)],
NULL);
/* Multi Core Timer */
dev = qdev_create(NULL, "exynos4210.mct");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < 4; n++) {
/* Connect global timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, n,
s->irq_table[exynos4210_get_irq(1, 4 + n)]);
}
/* Connect local timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, 4,
s->irq_table[exynos4210_get_irq(51, 0)]);
sysbus_connect_irq(busdev, 5,
s->irq_table[exynos4210_get_irq(35, 3)]);
sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
/*** I2C ***/
for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
qemu_irq i2c_irq;
if (n < 8) {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
} else {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
}
dev = qdev_create(NULL, "exynos4210.i2c");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, i2c_irq);
sysbus_mmio_map(busdev, 0, addr);
s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
}
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
/*** SD/MMC host controllers ***/
for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) {
DeviceState *carddev;
BlockBackend *blk;
DriveInfo *di;
dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI);
qdev_prop_set_uint32(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n));
sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]);
di = drive_get(IF_SD, 0, n);
blk = di ? blk_by_legacy_dinfo(di) : NULL;
carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
qdev_prop_set_drive(carddev, "drive", blk, &error_abort);
qdev_init_nofail(carddev);
}
/*** Display controller (FIMD) ***/
sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
s->irq_table[exynos4210_get_irq(11, 0)],
s->irq_table[exynos4210_get_irq(11, 1)],
s->irq_table[exynos4210_get_irq(11, 2)],
NULL);
sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
s->irq_table[exynos4210_get_irq(28, 3)]);
return s;
}