qemu-e2k/block/raw-format.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

649 lines
19 KiB
C
Raw Normal View History

block: Rename raw_bsd to raw-format.c Given that we have raw-win32.c and raw-posix.c, my initial guess at raw_bsd.c was that it was for dealing with raw files using code specific to the BSD operating system (beyond what raw-posix could do). Not so - this name was chosen back in commit e1c66c6 to distinguish that it was a BSD licensed file, in contrast to the then-existing raw.c with an unclear and potentially unusable license. But since it has been more than three years since the rewrite, it's time to pick a more useful name for this file to avoid this type of confusion to future contributors that don't know the backstory, as none of our other files are named solely by the license they use. In reality, this file deals with the raw format, which is useful with any number of protocols, while raw-{win32,posix} deal with the file protocol (and in turn, that protocol is not limited to use with the raw format). So rename raw_bsd to raw-format.c. We could have also used the shorter name raw.c, except that collides with the earlier use of that filename for a different license, and it's better to be safe than risk license pollution. The next patch will also rename raw-win32.c and raw-posix.c to further distinguish the difference in roles. It doesn't hurt that this gets rid of an underscore in the filename, thereby making tab-completion on 'ra<TAB>' easier (now I don't have to type the shift key, which slows things down :) Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-12-02 20:48:53 +01:00
/* BlockDriver implementation for "raw" format driver
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
*
* Copyright (C) 2010-2016 Red Hat, Inc.
* Copyright (C) 2010, Blue Swirl <blauwirbel@gmail.com>
* Copyright (C) 2009, Anthony Liguori <aliguori@us.ibm.com>
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
*
* Author:
* Laszlo Ersek <lersek@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
* deal in the Software without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "block/block-io.h"
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
#include "block/block_int.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "qemu/memalign.h"
typedef struct BDRVRawState {
uint64_t offset;
uint64_t size;
bool has_size;
} BDRVRawState;
static const char *const mutable_opts[] = { "offset", "size", NULL };
static QemuOptsList raw_runtime_opts = {
.name = "raw",
.head = QTAILQ_HEAD_INITIALIZER(raw_runtime_opts.head),
.desc = {
{
.name = "offset",
.type = QEMU_OPT_SIZE,
.help = "offset in the disk where the image starts",
},
{
.name = "size",
.type = QEMU_OPT_SIZE,
.help = "virtual disk size",
},
{ /* end of list */ }
},
};
static QemuOptsList raw_create_opts = {
.name = "raw-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(raw_create_opts.head),
.desc = {
{
.name = BLOCK_OPT_SIZE,
.type = QEMU_OPT_SIZE,
.help = "Virtual disk size"
},
{ /* end of list */ }
}
};
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
static int raw_read_options(QDict *options, uint64_t *offset, bool *has_size,
uint64_t *size, Error **errp)
{
QemuOpts *opts = NULL;
int ret;
opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort);
if (!qemu_opts_absorb_qdict(opts, options, errp)) {
ret = -EINVAL;
goto end;
}
*offset = qemu_opt_get_size(opts, "offset", 0);
*has_size = qemu_opt_find(opts, "size");
*size = qemu_opt_get_size(opts, "size", 0);
ret = 0;
end:
qemu_opts_del(opts);
return ret;
}
static int raw_apply_options(BlockDriverState *bs, BDRVRawState *s,
uint64_t offset, bool has_size, uint64_t size,
Error **errp)
{
int64_t real_size = 0;
real_size = bdrv_getlength(bs->file->bs);
if (real_size < 0) {
error_setg_errno(errp, -real_size, "Could not get image size");
return real_size;
}
/* Check size and offset */
if (offset > real_size) {
error_setg(errp, "Offset (%" PRIu64 ") cannot be greater than "
"size of the containing file (%" PRId64 ")",
s->offset, real_size);
return -EINVAL;
}
if (has_size && (real_size - offset) < size) {
error_setg(errp, "The sum of offset (%" PRIu64 ") and size "
"(%" PRIu64 ") has to be smaller or equal to the "
" actual size of the containing file (%" PRId64 ")",
s->offset, s->size, real_size);
return -EINVAL;
}
/* Make sure size is multiple of BDRV_SECTOR_SIZE to prevent rounding
* up and leaking out of the specified area. */
if (has_size && !QEMU_IS_ALIGNED(size, BDRV_SECTOR_SIZE)) {
error_setg(errp, "Specified size is not multiple of %llu",
BDRV_SECTOR_SIZE);
return -EINVAL;
}
s->offset = offset;
s->has_size = has_size;
s->size = has_size ? size : real_size - offset;
return 0;
}
static int raw_reopen_prepare(BDRVReopenState *reopen_state,
BlockReopenQueue *queue, Error **errp)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
bool has_size;
uint64_t offset, size;
int ret;
assert(reopen_state != NULL);
assert(reopen_state->bs != NULL);
reopen_state->opaque = g_new0(BDRVRawState, 1);
ret = raw_read_options(reopen_state->options, &offset, &has_size, &size,
errp);
if (ret < 0) {
return ret;
}
ret = raw_apply_options(reopen_state->bs, reopen_state->opaque,
offset, has_size, size, errp);
if (ret < 0) {
return ret;
}
return 0;
}
static void raw_reopen_commit(BDRVReopenState *state)
{
BDRVRawState *new_s = state->opaque;
BDRVRawState *s = state->bs->opaque;
memcpy(s, new_s, sizeof(BDRVRawState));
g_free(state->opaque);
state->opaque = NULL;
}
static void raw_reopen_abort(BDRVReopenState *state)
{
g_free(state->opaque);
state->opaque = NULL;
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
/* Check and adjust the offset, against 'offset' and 'size' options. */
block: use int64_t instead of uint64_t in driver read handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 12:27:59 +02:00
static inline int raw_adjust_offset(BlockDriverState *bs, int64_t *offset,
int64_t bytes, bool is_write)
{
BDRVRawState *s = bs->opaque;
if (s->has_size && (*offset > s->size || bytes > (s->size - *offset))) {
/* There's not enough space for the write, or the read request is
* out-of-range. Don't read/write anything to prevent leaking out of
* the size specified in options. */
return is_write ? -ENOSPC : -EINVAL;
}
if (*offset > INT64_MAX - s->offset) {
return -EINVAL;
}
*offset += s->offset;
return 0;
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, BdrvRequestFlags flags)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
int ret;
ret = raw_adjust_offset(bs, &offset, bytes, false);
if (ret) {
return ret;
}
BLKDBG_EVENT(bs->file, BLKDBG_READ_AIO);
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, BdrvRequestFlags flags)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
void *buf = NULL;
BlockDriver *drv;
QEMUIOVector local_qiov;
int ret;
if (bs->probed && offset < BLOCK_PROBE_BUF_SIZE && bytes) {
/* Handling partial writes would be a pain - so we just
* require that guests have 512-byte request alignment if
* probing occurred */
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
QEMU_BUILD_BUG_ON(BLOCK_PROBE_BUF_SIZE != 512);
QEMU_BUILD_BUG_ON(BDRV_SECTOR_SIZE != 512);
assert(offset == 0 && bytes >= BLOCK_PROBE_BUF_SIZE);
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
buf = qemu_try_blockalign(bs->file->bs, 512);
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
if (!buf) {
ret = -ENOMEM;
goto fail;
}
ret = qemu_iovec_to_buf(qiov, 0, buf, 512);
if (ret != 512) {
ret = -EINVAL;
goto fail;
}
drv = bdrv_probe_all(buf, 512, NULL);
if (drv != bs->drv) {
ret = -EPERM;
goto fail;
}
/* Use the checked buffer, a malicious guest might be overwriting its
* original buffer in the background. */
qemu_iovec_init(&local_qiov, qiov->niov + 1);
qemu_iovec_add(&local_qiov, buf, 512);
qemu_iovec_concat(&local_qiov, qiov, 512, qiov->size - 512);
qiov = &local_qiov;
block: add BDRV_REQ_REGISTERED_BUF request flag Block drivers may optimize I/O requests accessing buffers previously registered with bdrv_register_buf(). Checking whether all elements of a request's QEMUIOVector are within previously registered buffers is expensive, so we need a hint from the user to avoid costly checks. Add a BDRV_REQ_REGISTERED_BUF request flag to indicate that all QEMUIOVector elements in an I/O request are known to be within previously registered buffers. Always pass the flag through to driver read/write functions. There is little harm in passing the flag to a driver that does not use it. Passing the flag to drivers avoids changes across many block drivers. Filter drivers would need to explicitly support the flag and pass through to their children when the children support it. That's a lot of code changes and it's hard to remember to do that everywhere, leading to silent reduced performance when the flag is accidentally dropped. The only problematic scenario with the approach in this patch is when a driver passes the flag through to internal I/O requests that don't use the same I/O buffer. In that case the hint may be set when it should actually be clear. This is a rare case though so the risk is low. Some drivers have assert(!flags), which no longer works when BDRV_REQ_REGISTERED_BUF is passed in. These assertions aren't very useful anyway since the functions are called almost exclusively by bdrv_driver_preadv/pwritev() so if we get flags handling right there then the assertion is not needed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20221013185908.1297568-7-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-13 20:59:01 +02:00
flags &= ~BDRV_REQ_REGISTERED_BUF;
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
}
block: use int64_t instead of uint64_t in driver write handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 12:28:00 +02:00
ret = raw_adjust_offset(bs, &offset, bytes, true);
if (ret) {
goto fail;
}
BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
fail:
if (qiov == &local_qiov) {
qemu_iovec_destroy(&local_qiov);
}
qemu_vfree(buf);
return ret;
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
bool want_zero, int64_t offset,
int64_t bytes, int64_t *pnum,
int64_t *map,
BlockDriverState **file)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
BDRVRawState *s = bs->opaque;
*pnum = bytes;
*file = bs->file->bs;
*map = offset + s->offset;
return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
BdrvRequestFlags flags)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
int ret;
block: use int64_t instead of uint64_t in driver read handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 12:27:59 +02:00
ret = raw_adjust_offset(bs, &offset, bytes, true);
if (ret) {
return ret;
}
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
int ret;
block: use int64_t instead of uint64_t in driver read handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 12:27:59 +02:00
ret = raw_adjust_offset(bs, &offset, bytes, true);
if (ret) {
return ret;
}
return bdrv_co_pdiscard(bs->file, offset, bytes);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int64_t coroutine_fn GRAPH_RDLOCK
raw_co_getlength(BlockDriverState *bs)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
int64_t len;
BDRVRawState *s = bs->opaque;
/* Update size. It should not change unless the file was externally
* modified. */
2023-01-13 21:42:04 +01:00
len = bdrv_co_getlength(bs->file->bs);
if (len < 0) {
return len;
}
if (len < s->offset) {
s->size = 0;
} else {
if (s->has_size) {
/* Try to honour the size */
s->size = MIN(s->size, len - s->offset);
} else {
s->size = len - s->offset;
}
}
return s->size;
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static BlockMeasureInfo *raw_measure(QemuOpts *opts, BlockDriverState *in_bs,
Error **errp)
{
BlockMeasureInfo *info;
int64_t required;
if (in_bs) {
required = bdrv_getlength(in_bs);
if (required < 0) {
error_setg_errno(errp, -required, "Unable to get image size");
return NULL;
}
} else {
required = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
}
qcow2: Expose bitmaps' size during measure It's useful to know how much space can be occupied by qcow2 persistent bitmaps, even though such metadata is unrelated to the guest-visible data. Report this value as an additional QMP field, present when measuring an existing image and output format that both support bitmaps. Update iotest 178 and 190 to updated output, as well as new coverage in 190 demonstrating non-zero values made possible with the recently-added qemu-img bitmap command (see 3b51ab4b). The new 'bitmaps size:' field is displayed automatically as part of 'qemu-img measure' any time it is present in QMP (that is, any time both the source image being measured and destination format support bitmaps, even if the measurement is 0 because there are no bitmaps present). If the field is absent, it means that no bitmaps can be copied (source, destination, or both lack bitmaps, including when measuring based on size rather than on a source image). This behavior is compatible with an upcoming patch adding 'qemu-img convert --bitmaps': that command will fail in the same situations where this patch omits the field. The addition of a new field demonstrates why we should always zero-initialize qapi C structs; while the qcow2 driver still fully populates all fields, the raw and crypto drivers had to be tweaked to avoid uninitialized data. Consideration was also given towards having a 'qemu-img measure --bitmaps' which errors out when bitmaps are not possible, and otherwise sums the bitmaps into the existing allocation totals rather than displaying as a separate field, as a potential convenience factor. But this was ultimately decided to be more complexity than necessary when the QMP interface was sufficient enough with bitmaps remaining a separate field. See also: https://bugzilla.redhat.com/1779904 Reported-by: Nir Soffer <nsoffer@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521192137.1120211-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-21 21:21:34 +02:00
info = g_new0(BlockMeasureInfo, 1);
info->required = required;
/* Unallocated sectors count towards the file size in raw images */
info->fully_allocated = info->required;
return info;
}
static int coroutine_fn
raw_co_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
return bdrv_co_get_info(bs->file->bs, bdi);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
bs->bl.has_variable_length = bs->file->bs->bl.has_variable_length;
if (bs->probed) {
/* To make it easier to protect the first sector, any probed
* image is restricted to read-modify-write on sub-sector
* operations. */
bs->bl.request_alignment = BDRV_SECTOR_SIZE;
}
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_truncate(BlockDriverState *bs, int64_t offset, bool exact,
PreallocMode prealloc, BdrvRequestFlags flags, Error **errp)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
BDRVRawState *s = bs->opaque;
if (s->has_size) {
error_setg(errp, "Cannot resize fixed-size raw disks");
return -ENOTSUP;
}
if (INT64_MAX - offset < s->offset) {
error_setg(errp, "Disk size too large for the chosen offset");
return -EINVAL;
}
s->size = offset;
offset += s->offset;
return bdrv_co_truncate(bs->file, offset, exact, prealloc, flags, errp);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static void coroutine_fn GRAPH_RDLOCK
raw_co_eject(BlockDriverState *bs, bool eject_flag)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
bdrv_co_eject(bs->file->bs, eject_flag);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static void coroutine_fn GRAPH_RDLOCK
raw_co_lock_medium(BlockDriverState *bs, bool locked)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
bdrv_co_lock_medium(bs->file->bs, locked);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
BDRVRawState *s = bs->opaque;
if (s->offset || s->has_size) {
return -ENOTSUP;
}
return bdrv_co_ioctl(bs->file->bs, req, buf);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int raw_has_zero_init(BlockDriverState *bs)
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
{
return bdrv_has_zero_init(bs->file->bs);
add skeleton for BSD licensed "raw" BlockDriver On 08/05/13 15:03, Paolo Bonzini wrote: > > > ----- Original Message ----- >> From: "Laszlo Ersek" <lersek@redhat.com> >> To: "Paolo Bonzini" <pbonzini@redhat.com> >> Sent: Monday, August 5, 2013 2:43:46 PM >> Subject: Re: [PATCH 1/2] raw: add license header >> >> On 08/02/13 00:27, Paolo Bonzini wrote: >>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote: >>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote: >>>>> Most of the block layer is under the BSD license, thus it is >>>>> reasonable to license block/raw.c the same way. CCed people should >>>>> ACK by replying with a Signed-off-by line. >>>> >>>> The coded was intended to be GPLv2. >>> >>> Laszlo, would you be willing to do clean-room reverse engineering? >>> >>> (No rants, please. :)) >> >> What's the scope exactly? > > It's quite small, it's a file full of forwarders like > > static void raw_foo(BlockDriverState *bs) > { > return bdrv_foo(bs->file); > } > > It's 170 lines of code, all as boring as this. I only picked you > because I'm quite certain you have never seen the file (and the answer > confirmed it). > > Basically: > > 1) BlockDriver is a struct in which these function members are > interesting: > > .bdrv_reopen_prepare > .bdrv_co_readv > .bdrv_co_writev > .bdrv_co_is_allocated > .bdrv_co_write_zeroes > .bdrv_co_discard > .bdrv_getlength > .bdrv_get_info > .bdrv_truncate > .bdrv_is_inserted > .bdrv_media_changed > .bdrv_eject > .bdrv_lock_medium > .bdrv_ioctl > .bdrv_aio_ioctl > .bdrv_has_zero_init > > They should be implemented as simple forwarders (see above). > There are 16 functions listed here, you can easily see how this > already accounts for 100+ SLOC roughly... > > The implementations of bdrv_co_readv and bdrv_co_writev should also > call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The > events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO. > > 2) This is also a simple forwarder function: > > .bdrv_create > > but there is no BlockDriverState argument so the forwarded-to function > does not have a bs->file argument either. The forwarded-to function > is bdrv_create_file. > > 3) These members are special > > .format_name is the string "raw" > .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0 > .bdrv_close raw_close should do nothing > .bdrv_probe raw_probe should just return 1. > > 4) There is another member, .create_options, which is an array of > QEMUOptionParameter structs, terminated by an all-zero item. The only > option you need is for the virtual disk size. You will find something > to copy from in other block drivers, for example block/qcow2.c. > > 5) Formats are registered with bdrv_register (takes a BlockDriver*). > You also need to pass the caller of bdrv_register to block_init. > > 6) I'm not sure how to organize the patch series, so I'll leave this to > your creativity. I guess in this case move/copy detection of git should > be disabled. I would definitely include this spec in the commit > message as a proof of clean-room reverse engineering. > > 7) Remember a BSD header like the one in block.c. > > Paolo This patch implements the email up to the paragraph ending with "100+ SLOC roughly". The skeleton is generated from the list there, with a simple shell loop using "sed" and the raw_foo() template. The BSD license block is copied (and reflowed) from "util/qemu-progress.c". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 12:41:17 +02:00
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_create_opts(BlockDriver *drv, const char *filename,
QemuOpts *opts, Error **errp)
{
return bdrv_co_create_file(filename, opts, errp);
}
static int raw_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
bool has_size;
uint64_t offset, size;
BdrvChildRole file_role;
int ret;
ret = raw_read_options(options, &offset, &has_size, &size, errp);
if (ret < 0) {
return ret;
}
/*
* Without offset and a size limit, this driver behaves very much
* like a filter. With any such limit, it does not.
*/
if (offset || has_size) {
file_role = BDRV_CHILD_DATA | BDRV_CHILD_PRIMARY;
} else {
file_role = BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY;
}
block: Manipulate bs->file / bs->backing pointers in .attach/.detach bs->file and bs->backing are a kind of duplication of part of bs->children. But very useful diplication, so let's not drop them at all:) We should manage bs->file and bs->backing in same place, where we manage bs->children, to keep them in sync. Moreover, generic io paths are unprepared to BdrvChild without a bs, so it's double good to clear bs->file / bs->backing when we detach the child. Detach is simple: if we detach bs->file or bs->backing child, just set corresponding field to NULL. Attach is a bit more complicated. But we still can precisely detect should we set one of bs->file / bs->backing or not: - if role is BDRV_CHILD_COW, we definitely deal with bs->backing - else, if role is BDRV_CHILD_FILTERED (it must be also BDRV_CHILD_PRIMARY), it's a filtered child. Use bs->drv->filtered_child_is_backing to chose the pointer field to modify. - else, if role is BDRV_CHILD_PRIMARY, we deal with bs->file - in all other cases, it's neither bs->backing nor bs->file. It's some other child and we shouldn't care OK. This change brings one more good thing: we can (and should) get rid of all indirect pointers in the block-graph-change transactions: bdrv_attach_child_common() stores BdrvChild** into transaction to clear it on abort. bdrv_attach_child_common() has two callers: bdrv_attach_child_noperm() just pass-through this feature, bdrv_root_attach_child() doesn't need the feature. Look at bdrv_attach_child_noperm() callers: - bdrv_attach_child() doesn't need the feature - bdrv_set_file_or_backing_noperm() uses the feature to manage bs->file and bs->backing, we don't want it anymore - bdrv_append() uses the feature to manage bs->backing, again we don't want it anymore So, we should drop this stuff! Great! We could probably keep BdrvChild** argument to keep the int return value, but it seems not worth the complexity. Finally, we now set .file / .backing automatically in generic code and want to restring setting them by hand outside of .attach/.detach. So, this patch cleanups all remaining places where they were set. To find such places I use: git grep '\->file =' git grep '\->backing =' git grep '&.*\<backing\>' git grep '&.*\<file\>' Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220726201134.924743-14-vsementsov@yandex-team.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-07-26 22:11:32 +02:00
bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
file_role, false, errp);
if (!bs->file) {
return -EINVAL;
}
bs->sg = bdrv_is_sg(bs->file->bs);
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
bs->supported_truncate_flags = bs->file->bs->supported_truncate_flags &
BDRV_REQ_ZERO_WRITE;
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
if (bs->probed && !bdrv_is_read_only(bs)) {
bdrv_refresh_filename(bs->file->bs);
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
fprintf(stderr,
"WARNING: Image format was not specified for '%s' and probing "
"guessed raw.\n"
" Automatically detecting the format is dangerous for "
"raw images, write operations on block 0 will be restricted.\n"
" Specify the 'raw' format explicitly to remove the "
"restrictions.\n",
bs->file->bs->filename);
raw: Prohibit dangerous writes for probed images If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 16:27:12 +01:00
}
ret = raw_apply_options(bs, s, offset, has_size, size, errp);
if (ret < 0) {
return ret;
}
if (bdrv_is_sg(bs) && (s->offset || s->has_size)) {
error_setg(errp, "Cannot use offset/size with SCSI generic devices");
return -EINVAL;
}
return 0;
}
static int raw_probe(const uint8_t *buf, int buf_size, const char *filename)
{
/* smallest possible positive score so that raw is used if and only if no
* other block driver works
*/
return 1;
}
static int raw_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
{
BDRVRawState *s = bs->opaque;
int ret;
ret = bdrv_probe_blocksizes(bs->file->bs, bsz);
if (ret < 0) {
return ret;
}
if (!QEMU_IS_ALIGNED(s->offset, MAX(bsz->log, bsz->phys))) {
return -ENOTSUP;
}
return 0;
}
static int raw_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
{
BDRVRawState *s = bs->opaque;
if (s->offset || s->has_size) {
return -ENOTSUP;
}
return bdrv_probe_geometry(bs->file->bs, geo);
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_copy_range_from(BlockDriverState *bs,
BdrvChild *src, int64_t src_offset,
BdrvChild *dst, int64_t dst_offset,
int64_t bytes, BdrvRequestFlags read_flags,
BdrvRequestFlags write_flags)
{
int ret;
ret = raw_adjust_offset(bs, &src_offset, bytes, false);
if (ret) {
return ret;
}
return bdrv_co_copy_range_from(bs->file, src_offset, dst, dst_offset,
bytes, read_flags, write_flags);
}
static int coroutine_fn GRAPH_RDLOCK
raw_co_copy_range_to(BlockDriverState *bs,
BdrvChild *src, int64_t src_offset,
BdrvChild *dst, int64_t dst_offset,
int64_t bytes, BdrvRequestFlags read_flags,
BdrvRequestFlags write_flags)
{
int ret;
ret = raw_adjust_offset(bs, &dst_offset, bytes, true);
if (ret) {
return ret;
}
return bdrv_co_copy_range_to(src, src_offset, bs->file, dst_offset, bytes,
read_flags, write_flags);
}
static const char *const raw_strong_runtime_opts[] = {
"offset",
"size",
NULL
};
static void raw_cancel_in_flight(BlockDriverState *bs)
{
bdrv_cancel_in_flight(bs->file->bs);
}
raw-format: drop WRITE and RESIZE child perms when possible The following command-line fails due to a permissions conflict: $ qemu-storage-daemon \ --blockdev driver=nvme,node-name=nvme0,device=0000:08:00.0,namespace=1 \ --blockdev driver=raw,node-name=l1-1,file=nvme0,offset=0,size=1073741824 \ --blockdev driver=raw,node-name=l1-2,file=nvme0,offset=1073741824,size=1073741824 \ --nbd-server addr.type=unix,addr.path=/tmp/nbd.sock,max-connections=2 \ --export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on \ --export type=nbd,id=nbd-l1-2,node-name=l1-2,name=l1-2,writable=on qemu-storage-daemon: --export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on: Permission conflict on node 'nvme0': permissions 'resize' are both required by node 'l1-1' (uses node 'nvme0' as 'file' child) and unshared by node 'l1-2' (uses node 'nvme0' as 'file' child). The problem is that block/raw-format.c relies on bdrv_default_perms() to set permissions on the nvme node. The default permissions add RESIZE in anticipation of a format driver like qcow2 that needs to grow the image file. This fails because RESIZE is unshared, so we cannot get the RESIZE permission. Max Reitz pointed out that block/crypto.c already handles this case by implementing a custom ->bdrv_child_perm() function that adjusts the result of bdrv_default_perms(). This patch takes the same approach in block/raw-format.c so that RESIZE is only required if it's actually necessary (e.g. the parent is qcow2). Cc: Max Reitz <mreitz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210726122839.822900-1-stefanha@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-07-26 14:28:39 +02:00
static void raw_child_perm(BlockDriverState *bs, BdrvChild *c,
BdrvChildRole role,
BlockReopenQueue *reopen_queue,
uint64_t parent_perm, uint64_t parent_shared,
uint64_t *nperm, uint64_t *nshared)
{
bdrv_default_perms(bs, c, role, reopen_queue, parent_perm,
parent_shared, nperm, nshared);
/*
* bdrv_default_perms() may add WRITE and/or RESIZE (see comment in
* bdrv_default_perms_for_storage() for an explanation) but we only need
* them if they are in parent_perm. Drop WRITE and RESIZE whenever possible
* to avoid permission conflicts.
*/
*nperm &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
*nperm |= parent_perm & (BLK_PERM_WRITE | BLK_PERM_RESIZE);
}
BlockDriver bdrv_raw = {
.format_name = "raw",
.instance_size = sizeof(BDRVRawState),
.bdrv_probe = &raw_probe,
.bdrv_reopen_prepare = &raw_reopen_prepare,
.bdrv_reopen_commit = &raw_reopen_commit,
.bdrv_reopen_abort = &raw_reopen_abort,
.bdrv_open = &raw_open,
raw-format: drop WRITE and RESIZE child perms when possible The following command-line fails due to a permissions conflict: $ qemu-storage-daemon \ --blockdev driver=nvme,node-name=nvme0,device=0000:08:00.0,namespace=1 \ --blockdev driver=raw,node-name=l1-1,file=nvme0,offset=0,size=1073741824 \ --blockdev driver=raw,node-name=l1-2,file=nvme0,offset=1073741824,size=1073741824 \ --nbd-server addr.type=unix,addr.path=/tmp/nbd.sock,max-connections=2 \ --export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on \ --export type=nbd,id=nbd-l1-2,node-name=l1-2,name=l1-2,writable=on qemu-storage-daemon: --export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on: Permission conflict on node 'nvme0': permissions 'resize' are both required by node 'l1-1' (uses node 'nvme0' as 'file' child) and unshared by node 'l1-2' (uses node 'nvme0' as 'file' child). The problem is that block/raw-format.c relies on bdrv_default_perms() to set permissions on the nvme node. The default permissions add RESIZE in anticipation of a format driver like qcow2 that needs to grow the image file. This fails because RESIZE is unshared, so we cannot get the RESIZE permission. Max Reitz pointed out that block/crypto.c already handles this case by implementing a custom ->bdrv_child_perm() function that adjusts the result of bdrv_default_perms(). This patch takes the same approach in block/raw-format.c so that RESIZE is only required if it's actually necessary (e.g. the parent is qcow2). Cc: Max Reitz <mreitz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210726122839.822900-1-stefanha@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-07-26 14:28:39 +02:00
.bdrv_child_perm = raw_child_perm,
.bdrv_co_create_opts = &raw_co_create_opts,
.bdrv_co_preadv = &raw_co_preadv,
.bdrv_co_pwritev = &raw_co_pwritev,
.bdrv_co_pwrite_zeroes = &raw_co_pwrite_zeroes,
.bdrv_co_pdiscard = &raw_co_pdiscard,
.bdrv_co_block_status = &raw_co_block_status,
.bdrv_co_copy_range_from = &raw_co_copy_range_from,
.bdrv_co_copy_range_to = &raw_co_copy_range_to,
.bdrv_co_truncate = &raw_co_truncate,
2023-01-13 21:42:04 +01:00
.bdrv_co_getlength = &raw_co_getlength,
.is_format = true,
.bdrv_measure = &raw_measure,
.bdrv_co_get_info = &raw_co_get_info,
.bdrv_refresh_limits = &raw_refresh_limits,
.bdrv_probe_blocksizes = &raw_probe_blocksizes,
.bdrv_probe_geometry = &raw_probe_geometry,
.bdrv_co_eject = &raw_co_eject,
.bdrv_co_lock_medium = &raw_co_lock_medium,
.bdrv_co_ioctl = &raw_co_ioctl,
.create_opts = &raw_create_opts,
.bdrv_has_zero_init = &raw_has_zero_init,
.strong_runtime_opts = raw_strong_runtime_opts,
.mutable_opts = mutable_opts,
.bdrv_cancel_in_flight = raw_cancel_in_flight,
};
static void bdrv_raw_init(void)
{
bdrv_register(&bdrv_raw);
}
block_init(bdrv_raw_init);