qemu-e2k/chardev/spice.c

425 lines
11 KiB
C
Raw Normal View History

#include "qemu/osdep.h"
#include "trace.h"
#include "ui/qemu-spice.h"
#include "chardev/char.h"
#include "chardev/spice.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include <spice/protocol.h>
typedef struct SpiceCharSource {
GSource source;
SpiceChardev *scd;
} SpiceCharSource;
static QLIST_HEAD(, SpiceChardev) spice_chars =
QLIST_HEAD_INITIALIZER(spice_chars);
static int vmc_write(SpiceCharDeviceInstance *sin, const uint8_t *buf, int len)
{
SpiceChardev *scd = container_of(sin, SpiceChardev, sin);
Chardev *chr = CHARDEV(scd);
ssize_t out = 0;
ssize_t last_out;
uint8_t* p = (uint8_t*)buf;
while (len > 0) {
int can_write = qemu_chr_be_can_write(chr);
last_out = MIN(len, can_write);
if (last_out <= 0) {
break;
}
qemu_chr_be_write(chr, p, last_out);
out += last_out;
len -= last_out;
p += last_out;
}
trace_spice_vmc_write(out, len + out);
return out;
}
static int vmc_read(SpiceCharDeviceInstance *sin, uint8_t *buf, int len)
{
SpiceChardev *scd = container_of(sin, SpiceChardev, sin);
int bytes = MIN(len, scd->datalen);
if (bytes > 0) {
memcpy(buf, scd->datapos, bytes);
scd->datapos += bytes;
scd->datalen -= bytes;
assert(scd->datalen >= 0);
}
if (scd->datalen == 0) {
scd->datapos = 0;
scd->blocked = false;
}
trace_spice_vmc_read(bytes, len);
return bytes;
}
static void vmc_event(SpiceCharDeviceInstance *sin, uint8_t event)
{
SpiceChardev *scd = container_of(sin, SpiceChardev, sin);
Chardev *chr = CHARDEV(scd);
int chr_event;
switch (event) {
case SPICE_PORT_EVENT_BREAK:
chr_event = CHR_EVENT_BREAK;
break;
default:
return;
}
trace_spice_vmc_event(chr_event);
qemu_chr_be_event(chr, chr_event);
}
static void vmc_state(SpiceCharDeviceInstance *sin, int connected)
{
SpiceChardev *scd = container_of(sin, SpiceChardev, sin);
Chardev *chr = CHARDEV(scd);
if ((chr->be_open && connected) ||
(!chr->be_open && !connected)) {
return;
}
qemu_chr_be_event(chr,
connected ? CHR_EVENT_OPENED : CHR_EVENT_CLOSED);
}
static SpiceCharDeviceInterface vmc_interface = {
.base.type = SPICE_INTERFACE_CHAR_DEVICE,
.base.description = "spice virtual channel char device",
.base.major_version = SPICE_INTERFACE_CHAR_DEVICE_MAJOR,
.base.minor_version = SPICE_INTERFACE_CHAR_DEVICE_MINOR,
.state = vmc_state,
.write = vmc_write,
.read = vmc_read,
.event = vmc_event,
#if SPICE_SERVER_VERSION >= 0x000c06
.flags = SPICE_CHAR_DEVICE_NOTIFY_WRITABLE,
#endif
};
static void vmc_register_interface(SpiceChardev *scd)
{
if (scd->active) {
return;
}
scd->sin.base.sif = &vmc_interface.base;
qemu_spice_add_interface(&scd->sin.base);
scd->active = true;
trace_spice_vmc_register_interface(scd);
}
static void vmc_unregister_interface(SpiceChardev *scd)
{
if (!scd->active) {
return;
}
spice_server_remove_interface(&scd->sin.base);
scd->active = false;
trace_spice_vmc_unregister_interface(scd);
}
static gboolean spice_char_source_prepare(GSource *source, gint *timeout)
{
SpiceCharSource *src = (SpiceCharSource *)source;
Chardev *chr = CHARDEV(src->scd);
*timeout = -1;
if (!chr->be_open) {
return true;
}
return !src->scd->blocked;
}
static gboolean spice_char_source_check(GSource *source)
{
SpiceCharSource *src = (SpiceCharSource *)source;
Chardev *chr = CHARDEV(src->scd);
if (!chr->be_open) {
return true;
}
return !src->scd->blocked;
}
static gboolean spice_char_source_dispatch(GSource *source,
GSourceFunc callback, gpointer user_data)
{
SpiceCharSource *src = (SpiceCharSource *)source;
Chardev *chr = CHARDEV(src->scd);
GIOFunc func = (GIOFunc)callback;
GIOCondition cond = chr->be_open ? G_IO_OUT : G_IO_HUP;
return func(NULL, cond, user_data);
}
static GSourceFuncs SpiceCharSourceFuncs = {
.prepare = spice_char_source_prepare,
.check = spice_char_source_check,
.dispatch = spice_char_source_dispatch,
};
static GSource *spice_chr_add_watch(Chardev *chr, GIOCondition cond)
{
SpiceChardev *scd = SPICE_CHARDEV(chr);
SpiceCharSource *src;
assert(cond & G_IO_OUT);
src = (SpiceCharSource *)g_source_new(&SpiceCharSourceFuncs,
sizeof(SpiceCharSource));
src->scd = scd;
return (GSource *)src;
}
static int spice_chr_write(Chardev *chr, const uint8_t *buf, int len)
{
SpiceChardev *s = SPICE_CHARDEV(chr);
int read_bytes;
assert(s->datalen == 0);
char/spice: discard write() if backend is disconnected Most chardev backend handle write() as discarded data if underlying system is disconnected. For unknown historical reasons, the Spice backend has "reliable" write: it will wait until the client end is reconnected to do further successful write(). To decide whether it make sense to wait until the client is reconnected (or queue the writes), let's review Spice chardev usage and handling of a disconnected client: * spice vdagent The agents reopen the virtio port on disconnect. In qemu side, virtio_serial_close() will also discard pending data. * usb redirection A disconnect creates a device disconnection. * smartcard emulation Data is discarded in passthru_apdu_from_guest(). (Spice doesn't explicitly open the smartcard char device until upcoming 0.14.2, commit 69a5cfc74131ec0459f2eb5a231139f5a69a8037) * spice webdavd The daemon will restart the service, and reopen the virtio port. * spice ports (serial console, qemu monitor..) Depends on the associated device or usage. - serial, may be throttled or discarded on write, depending on device - QMP/HMP monitor have some CLOSED event handling, but want to flush the write, which will finish when a new client connects. On disconnect/reconnect, the client starts with fresh sessions. If it is a seamless migration, the client disconnects after the source migrated. The handling of source disconnect in qemu is thus irrelevant for the Spice session migration. For all these use cases, it is better to discard writes when the client is disconnected, and require the vm-side device/agent to behave correctly on CHR_EVENT_CLOSED, to stop reading and writing from the spice chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 12:06:54 +01:00
if (!chr->be_open) {
trace_spice_chr_discard_write(len);
return len;
}
s->datapos = buf;
s->datalen = len;
spice_server_char_device_wakeup(&s->sin);
read_bytes = len - s->datalen;
if (read_bytes != len) {
/* We'll get passed in the unconsumed data with the next call */
s->datalen = 0;
s->datapos = NULL;
s->blocked = true;
}
return read_bytes;
}
static void char_spice_finalize(Object *obj)
{
SpiceChardev *s = SPICE_CHARDEV(obj);
vmc_unregister_interface(s);
QLIST_SAFE_REMOVE(s, next);
g_free((char *)s->sin.subtype);
g_free((char *)s->sin.portname);
}
static void spice_vmc_set_fe_open(struct Chardev *chr, int fe_open)
{
SpiceChardev *s = SPICE_CHARDEV(chr);
if (fe_open) {
vmc_register_interface(s);
} else {
vmc_unregister_interface(s);
}
}
static void spice_port_set_fe_open(struct Chardev *chr, int fe_open)
{
SpiceChardev *s = SPICE_CHARDEV(chr);
if (fe_open) {
spice_server_port_event(&s->sin, SPICE_PORT_EVENT_OPENED);
} else {
spice_server_port_event(&s->sin, SPICE_PORT_EVENT_CLOSED);
}
}
static void spice_chr_accept_input(struct Chardev *chr)
{
SpiceChardev *s = SPICE_CHARDEV(chr);
spice_server_char_device_wakeup(&s->sin);
}
static void chr_open(Chardev *chr, const char *subtype)
{
SpiceChardev *s = SPICE_CHARDEV(chr);
s->active = false;
s->sin.subtype = g_strdup(subtype);
QLIST_INSERT_HEAD(&spice_chars, s, next);
}
static void qemu_chr_open_spice_vmc(Chardev *chr,
ChardevBackend *backend,
bool *be_opened,
Error **errp)
{
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
ChardevSpiceChannel *spicevmc = backend->u.spicevmc.data;
const char *type = spicevmc->type;
const char **psubtype = spice_server_char_device_recognized_subtypes();
for (; *psubtype != NULL; ++psubtype) {
if (strcmp(type, *psubtype) == 0) {
break;
}
}
if (*psubtype == NULL) {
char *subtypes = g_strjoinv(", ",
(gchar **)spice_server_char_device_recognized_subtypes());
error_setg(errp, "unsupported type name: %s", type);
error_append_hint(errp, "allowed spice char type names: %s\n",
subtypes);
g_free(subtypes);
return;
}
*be_opened = false;
char/spice: discard write() if backend is disconnected Most chardev backend handle write() as discarded data if underlying system is disconnected. For unknown historical reasons, the Spice backend has "reliable" write: it will wait until the client end is reconnected to do further successful write(). To decide whether it make sense to wait until the client is reconnected (or queue the writes), let's review Spice chardev usage and handling of a disconnected client: * spice vdagent The agents reopen the virtio port on disconnect. In qemu side, virtio_serial_close() will also discard pending data. * usb redirection A disconnect creates a device disconnection. * smartcard emulation Data is discarded in passthru_apdu_from_guest(). (Spice doesn't explicitly open the smartcard char device until upcoming 0.14.2, commit 69a5cfc74131ec0459f2eb5a231139f5a69a8037) * spice webdavd The daemon will restart the service, and reopen the virtio port. * spice ports (serial console, qemu monitor..) Depends on the associated device or usage. - serial, may be throttled or discarded on write, depending on device - QMP/HMP monitor have some CLOSED event handling, but want to flush the write, which will finish when a new client connects. On disconnect/reconnect, the client starts with fresh sessions. If it is a seamless migration, the client disconnects after the source migrated. The handling of source disconnect in qemu is thus irrelevant for the Spice session migration. For all these use cases, it is better to discard writes when the client is disconnected, and require the vm-side device/agent to behave correctly on CHR_EVENT_CLOSED, to stop reading and writing from the spice chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 12:06:54 +01:00
#if SPICE_SERVER_VERSION < 0x000e02
/* Spice < 0.14.2 doesn't explicitly open smartcard chardev */
if (strcmp(type, "smartcard") == 0) {
*be_opened = true;
}
#endif
chr_open(chr, type);
}
void qemu_chr_open_spice_port(Chardev *chr,
ChardevBackend *backend,
bool *be_opened,
Error **errp)
{
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
ChardevSpicePort *spiceport = backend->u.spiceport.data;
const char *name = spiceport->fqdn;
SpiceChardev *s;
if (name == NULL) {
error_setg(errp, "missing name parameter");
return;
}
chr_open(chr, "port");
*be_opened = false;
s = SPICE_CHARDEV(chr);
s->sin.portname = g_strdup(name);
if (using_spice) {
/* spice server already created */
vmc_register_interface(s);
}
}
void qemu_spice_register_ports(void)
{
SpiceChardev *s;
QLIST_FOREACH(s, &spice_chars, next) {
if (s->sin.portname == NULL) {
continue;
}
vmc_register_interface(s);
}
}
static void qemu_chr_parse_spice_vmc(QemuOpts *opts, ChardevBackend *backend,
Error **errp)
{
const char *name = qemu_opt_get(opts, "name");
ChardevSpiceChannel *spicevmc;
if (name == NULL) {
error_setg(errp, "chardev: spice channel: no name given");
return;
}
backend->type = CHARDEV_BACKEND_KIND_SPICEVMC;
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
spicevmc = backend->u.spicevmc.data = g_new0(ChardevSpiceChannel, 1);
qemu_chr_parse_common(opts, qapi_ChardevSpiceChannel_base(spicevmc));
spicevmc->type = g_strdup(name);
}
static void qemu_chr_parse_spice_port(QemuOpts *opts, ChardevBackend *backend,
Error **errp)
{
const char *name = qemu_opt_get(opts, "name");
ChardevSpicePort *spiceport;
if (name == NULL) {
error_setg(errp, "chardev: spice port: no name given");
return;
}
backend->type = CHARDEV_BACKEND_KIND_SPICEPORT;
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17 23:48:37 +01:00
spiceport = backend->u.spiceport.data = g_new0(ChardevSpicePort, 1);
qemu_chr_parse_common(opts, qapi_ChardevSpicePort_base(spiceport));
spiceport->fqdn = g_strdup(name);
}
static void char_spice_class_init(ObjectClass *oc, void *data)
{
ChardevClass *cc = CHARDEV_CLASS(oc);
cc->chr_write = spice_chr_write;
cc->chr_add_watch = spice_chr_add_watch;
cc->chr_accept_input = spice_chr_accept_input;
}
static const TypeInfo char_spice_type_info = {
.name = TYPE_CHARDEV_SPICE,
.parent = TYPE_CHARDEV,
.instance_size = sizeof(SpiceChardev),
.instance_finalize = char_spice_finalize,
.class_init = char_spice_class_init,
.abstract = true,
};
static void char_spicevmc_class_init(ObjectClass *oc, void *data)
{
ChardevClass *cc = CHARDEV_CLASS(oc);
cc->parse = qemu_chr_parse_spice_vmc;
cc->open = qemu_chr_open_spice_vmc;
cc->chr_set_fe_open = spice_vmc_set_fe_open;
}
static const TypeInfo char_spicevmc_type_info = {
.name = TYPE_CHARDEV_SPICEVMC,
.parent = TYPE_CHARDEV_SPICE,
.class_init = char_spicevmc_class_init,
};
static void char_spiceport_class_init(ObjectClass *oc, void *data)
{
ChardevClass *cc = CHARDEV_CLASS(oc);
cc->parse = qemu_chr_parse_spice_port;
cc->open = qemu_chr_open_spice_port;
cc->chr_set_fe_open = spice_port_set_fe_open;
}
static const TypeInfo char_spiceport_type_info = {
.name = TYPE_CHARDEV_SPICEPORT,
.parent = TYPE_CHARDEV_SPICE,
.class_init = char_spiceport_class_init,
};
static void register_types(void)
{
type_register_static(&char_spice_type_info);
type_register_static(&char_spicevmc_type_info);
type_register_static(&char_spiceport_type_info);
}
type_init(register_types);