qemu-e2k/tests/qemu-iotests/146

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

196 lines
4.4 KiB
Plaintext
Raw Normal View History

#!/usr/bin/env bash
# group: quick
#
# Test VHD image format creator detection and override
#
# Copyright (C) 2016 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# creator
owner=codyprime@gmail.com
seq=`basename $0`
echo "QA output created by $seq"
status=1 # failure is the default!
_cleanup()
{
_cleanup_qemu
_cleanup_test_img
}
trap "_cleanup; exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common.rc
. ./common.filter
. ./common.qemu
_supported_fmt vpc
_supported_proto file
_supported_os Linux
qemu_comm_method="monitor"
silent=
echo
echo === Testing VPC Autodetect ===
echo
_use_sample_img virtualpc-dynamic.vhd.bz2
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing VPC with current_size force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=current_size,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing VPC with chs force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=chs,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
_cleanup_test_img
echo
echo === Testing Hyper-V Autodetect ===
echo
_use_sample_img hyperv2012r2-dynamic.vhd.bz2
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing Hyper-V with current_size force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=current_size,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing Hyper-V with chs force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=chs,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
_cleanup_test_img
echo
echo === Testing d2v Autodetect ===
echo
_use_sample_img d2v-zerofilled.vhd.bz2
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing d2v with current_size force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=current_size,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing d2v with chs force ===
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=chs,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
_cleanup_test_img
echo
echo === Testing Image create, default ===
echo
TEST_IMG="${TEST_DIR}/vpc-create-test.vpc"
_make_test_img 4G
echo
echo === Read created image, default opts ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Read created image, force_size_calc=chs ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=chs,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Read created image, force_size_calc=current_size ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=current_size,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Testing Image create, force_size ===
echo
_make_test_img -o force_size 4G
echo
echo === Read created image, default opts ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Read created image, force_size_calc=chs ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=chs,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo
echo === Read created image, force_size_calc=current_size ====
echo
block/vpc: return ZERO block-status when appropriate In case when get_image_offset() returns -1, we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi in the previous patch and vpc now) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com> [mreitz: qemu-io -c map as used by iotest 146 now reports everything as allocated; in order to make the test do something useful, we use qemu-img map --output=json now] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-28 11:43:59 +02:00
$QEMU_IMG map --output=json --image-opts \
"driver=vpc,force_size_calc=current_size,file.filename=$TEST_IMG" \
| _filter_qemu_img_map
echo "*** done"
rm -f $seq.full
status=0