qemu-e2k/hw/misc/iotkit-sysctl.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

872 lines
25 KiB
C
Raw Normal View History

/*
* ARM IoTKit system control element
*
* Copyright (c) 2018 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or
* (at your option) any later version.
*/
/*
* This is a model of the "system control element" which is part of the
* Arm IoTKit and documented in
* https://developer.arm.com/documentation/ecm0601256/latest
* Specifically, it implements the "system control register" blocks.
*/
#include "qemu/osdep.h"
#include "qemu/bitops.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "sysemu/runstate.h"
#include "trace.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/registerfields.h"
#include "hw/misc/iotkit-sysctl.h"
#include "hw/qdev-properties.h"
hw/arm/armsse: Introduce SSE subsystem version property We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-6-peter.maydell@linaro.org
2021-02-19 15:45:38 +01:00
#include "hw/arm/armsse-version.h"
#include "target/arm/arm-powerctl.h"
REG32(SECDBGSTAT, 0x0)
REG32(SECDBGSET, 0x4)
REG32(SECDBGCLR, 0x8)
REG32(SCSECCTRL, 0xc)
REG32(FCLK_DIV, 0x10)
REG32(SYSCLK_DIV, 0x14)
REG32(CLOCK_FORCE, 0x18)
REG32(RESET_SYNDROME, 0x100)
REG32(RESET_MASK, 0x104)
REG32(SWRESET, 0x108)
FIELD(SWRESET, SWRESETREQ, 9, 1)
REG32(GRETREG, 0x10c)
REG32(INITSVTOR0, 0x110)
FIELD(INITSVTOR0, LOCK, 0, 1)
FIELD(INITSVTOR0, VTOR, 7, 25)
REG32(INITSVTOR1, 0x114)
REG32(CPUWAIT, 0x118)
REG32(NMI_ENABLE, 0x11c) /* BUSWAIT in IoTKit */
REG32(WICCTRL, 0x120)
REG32(EWCTRL, 0x124)
REG32(PWRCTRL, 0x1fc)
FIELD(PWRCTRL, PPU_ACCESS_UNLOCK, 0, 1)
FIELD(PWRCTRL, PPU_ACCESS_FILTER, 1, 1)
REG32(PDCM_PD_SYS_SENSE, 0x200)
REG32(PDCM_PD_CPU0_SENSE, 0x204)
REG32(PDCM_PD_SRAM0_SENSE, 0x20c)
REG32(PDCM_PD_SRAM1_SENSE, 0x210)
REG32(PDCM_PD_SRAM2_SENSE, 0x214) /* PDCM_PD_VMR0_SENSE on SSE300 */
REG32(PDCM_PD_SRAM3_SENSE, 0x218) /* PDCM_PD_VMR1_SENSE on SSE300 */
REG32(PID4, 0xfd0)
REG32(PID5, 0xfd4)
REG32(PID6, 0xfd8)
REG32(PID7, 0xfdc)
REG32(PID0, 0xfe0)
REG32(PID1, 0xfe4)
REG32(PID2, 0xfe8)
REG32(PID3, 0xfec)
REG32(CID0, 0xff0)
REG32(CID1, 0xff4)
REG32(CID2, 0xff8)
REG32(CID3, 0xffc)
/* PID/CID values */
static const int iotkit_sysctl_id[] = {
0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
0x54, 0xb8, 0x0b, 0x00, /* PID0..PID3 */
0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
};
/* Also used by the SSE300 */
static const int sse200_sysctl_id[] = {
0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
0x54, 0xb8, 0x1b, 0x00, /* PID0..PID3 */
0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
};
/*
* Set the initial secure vector table offset address for the core.
* This will take effect when the CPU next resets.
*/
static void set_init_vtor(uint64_t cpuid, uint32_t vtor)
{
Object *cpuobj = OBJECT(arm_get_cpu_by_id(cpuid));
if (cpuobj) {
if (object_property_find(cpuobj, "init-svtor")) {
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_uint(cpuobj, "init-svtor", vtor, &error_abort);
}
}
}
static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
unsigned size)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque);
uint64_t r;
switch (offset) {
case A_SECDBGSTAT:
r = s->secure_debug;
break;
case A_SCSECCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
r = s->scsecctrl;
break;
default:
g_assert_not_reached();
}
break;
case A_FCLK_DIV:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
r = s->fclk_div;
break;
default:
g_assert_not_reached();
}
break;
case A_SYSCLK_DIV:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
r = s->sysclk_div;
break;
default:
g_assert_not_reached();
}
break;
case A_CLOCK_FORCE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
r = s->clock_force;
break;
default:
g_assert_not_reached();
}
break;
case A_RESET_SYNDROME:
r = s->reset_syndrome;
break;
case A_RESET_MASK:
r = s->reset_mask;
break;
case A_GRETREG:
r = s->gretreg;
break;
case A_INITSVTOR0:
r = s->initsvtor0;
break;
case A_INITSVTOR1:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->initsvtor1;
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_CPUWAIT:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
r = s->cpuwait;
break;
case ARMSSE_SSE300:
/* In SSE300 this is reserved (for INITSVTOR2) */
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_NMI_ENABLE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
/* In IoTKit this is named BUSWAIT but marked reserved, R/O, zero */
r = 0;
break;
case ARMSSE_SSE200:
r = s->nmi_enable;
break;
case ARMSSE_SSE300:
/* In SSE300 this is reserved (for INITSVTOR3) */
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_WICCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
r = s->wicctrl;
break;
case ARMSSE_SSE300:
/* In SSE300 this offset is CPUWAIT */
r = s->cpuwait;
break;
default:
g_assert_not_reached();
}
break;
case A_EWCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->ewctrl;
break;
case ARMSSE_SSE300:
/* In SSE300 this offset is NMI_ENABLE */
r = s->nmi_enable;
break;
default:
g_assert_not_reached();
}
break;
case A_PWRCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
goto bad_offset;
case ARMSSE_SSE300:
r = s->pwrctrl;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SYS_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
r = s->pdcm_pd_sys_sense;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_CPU0_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
goto bad_offset;
case ARMSSE_SSE300:
r = s->pdcm_pd_cpu0_sense;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM0_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->pdcm_pd_sram0_sense;
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM1_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->pdcm_pd_sram1_sense;
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM2_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->pdcm_pd_sram2_sense;
break;
case ARMSSE_SSE300:
r = s->pdcm_pd_vmr0_sense;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM3_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
r = s->pdcm_pd_sram3_sense;
break;
case ARMSSE_SSE300:
r = s->pdcm_pd_vmr1_sense;
break;
default:
g_assert_not_reached();
}
break;
case A_PID4 ... A_CID3:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
r = iotkit_sysctl_id[(offset - A_PID4) / 4];
break;
case ARMSSE_SSE200:
case ARMSSE_SSE300:
r = sse200_sysctl_id[(offset - A_PID4) / 4];
break;
default:
g_assert_not_reached();
}
break;
case A_SECDBGSET:
case A_SECDBGCLR:
case A_SWRESET:
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit SysCtl read: read of WO offset %x\n",
(int)offset);
r = 0;
break;
default:
bad_offset:
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit SysCtl read: bad offset %x\n", (int)offset);
r = 0;
break;
}
trace_iotkit_sysctl_read(offset, r, size);
return r;
}
static void cpuwait_write(IoTKitSysCtl *s, uint32_t value)
{
int num_cpus = (s->sse_version == ARMSSE_SSE300) ? 1 : 2;
int i;
for (i = 0; i < num_cpus; i++) {
uint32_t mask = 1 << i;
if ((s->cpuwait & mask) && !(value & mask)) {
/* Powering up CPU 0 */
arm_set_cpu_on_and_reset(i);
}
}
s->cpuwait = value;
}
static void iotkit_sysctl_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque);
trace_iotkit_sysctl_write(offset, value, size);
/*
* Most of the state here has to do with control of reset and
* similar kinds of power up -- for instance the guest can ask
* what the reason for the last reset was, or forbid reset for
* some causes (like the non-secure watchdog). Most of this is
* not relevant to QEMU, which doesn't really model anything other
* than a full power-on reset.
* We just model the registers as reads-as-written.
*/
switch (offset) {
case A_RESET_SYNDROME:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl RESET_SYNDROME unimplemented\n");
s->reset_syndrome = value;
break;
case A_RESET_MASK:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl RESET_MASK unimplemented\n");
s->reset_mask = value;
break;
case A_GRETREG:
/*
* General retention register, which is only reset by a power-on
* reset. Technically this implementation is complete, since
* QEMU only supports power-on resets...
*/
s->gretreg = value;
break;
case A_INITSVTOR0:
switch (s->sse_version) {
case ARMSSE_SSE300:
/* SSE300 has a LOCK bit which prevents further writes when set */
if (s->initsvtor0 & R_INITSVTOR0_LOCK_MASK) {
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit INITSVTOR0 write when register locked\n");
break;
}
s->initsvtor0 = value;
set_init_vtor(0, s->initsvtor0 & R_INITSVTOR0_VTOR_MASK);
break;
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
s->initsvtor0 = value;
set_init_vtor(0, s->initsvtor0);
break;
default:
g_assert_not_reached();
}
break;
case A_CPUWAIT:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
cpuwait_write(s, value);
break;
case ARMSSE_SSE300:
/* In SSE300 this is reserved (for INITSVTOR2) */
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_WICCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl WICCTRL unimplemented\n");
s->wicctrl = value;
break;
case ARMSSE_SSE300:
/* In SSE300 this offset is CPUWAIT */
cpuwait_write(s, value);
break;
default:
g_assert_not_reached();
}
break;
case A_SECDBGSET:
/* write-1-to-set */
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SECDBGSET unimplemented\n");
s->secure_debug |= value;
break;
case A_SECDBGCLR:
/* write-1-to-clear */
s->secure_debug &= ~value;
break;
case A_SWRESET:
/* One w/o bit to request a reset; all other bits reserved */
if (value & R_SWRESET_SWRESETREQ_MASK) {
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
}
break;
case A_SCSECCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SCSECCTRL unimplemented\n");
s->scsecctrl = value;
break;
default:
g_assert_not_reached();
}
break;
case A_FCLK_DIV:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl FCLK_DIV unimplemented\n");
s->fclk_div = value;
break;
default:
g_assert_not_reached();
}
break;
case A_SYSCLK_DIV:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SYSCLK_DIV unimplemented\n");
s->sysclk_div = value;
break;
default:
g_assert_not_reached();
}
break;
case A_CLOCK_FORCE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl CLOCK_FORCE unimplemented\n");
s->clock_force = value;
break;
default:
g_assert_not_reached();
}
break;
case A_INITSVTOR1:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
s->initsvtor1 = value;
set_init_vtor(1, s->initsvtor1);
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_EWCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl EWCTRL unimplemented\n");
s->ewctrl = value;
break;
case ARMSSE_SSE300:
/* In SSE300 this offset is NMI_ENABLE */
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl NMI_ENABLE unimplemented\n");
s->nmi_enable = value;
break;
default:
g_assert_not_reached();
}
break;
case A_PWRCTRL:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
goto bad_offset;
case ARMSSE_SSE300:
if (!(s->pwrctrl & R_PWRCTRL_PPU_ACCESS_UNLOCK_MASK)) {
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit PWRCTRL write when register locked\n");
break;
}
s->pwrctrl = value;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SYS_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_SYS_SENSE unimplemented\n");
s->pdcm_pd_sys_sense = value;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_CPU0_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
case ARMSSE_SSE200:
goto bad_offset;
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_CPU0_SENSE unimplemented\n");
s->pdcm_pd_cpu0_sense = value;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM0_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_SRAM0_SENSE unimplemented\n");
s->pdcm_pd_sram0_sense = value;
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM1_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_SRAM1_SENSE unimplemented\n");
s->pdcm_pd_sram1_sense = value;
break;
case ARMSSE_SSE300:
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM2_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_SRAM2_SENSE unimplemented\n");
s->pdcm_pd_sram2_sense = value;
break;
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_VMR0_SENSE unimplemented\n");
s->pdcm_pd_vmr0_sense = value;
break;
default:
g_assert_not_reached();
}
break;
case A_PDCM_PD_SRAM3_SENSE:
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto bad_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_SRAM3_SENSE unimplemented\n");
s->pdcm_pd_sram3_sense = value;
break;
case ARMSSE_SSE300:
qemu_log_mask(LOG_UNIMP,
"IoTKit SysCtl PDCM_PD_VMR1_SENSE unimplemented\n");
s->pdcm_pd_vmr1_sense = value;
break;
default:
g_assert_not_reached();
}
break;
case A_NMI_ENABLE:
/* In IoTKit this is BUSWAIT: reserved, R/O, zero */
switch (s->sse_version) {
case ARMSSE_IOTKIT:
goto ro_offset;
case ARMSSE_SSE200:
qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl NMI_ENABLE unimplemented\n");
s->nmi_enable = value;
break;
case ARMSSE_SSE300:
/* In SSE300 this is reserved (for INITSVTOR3) */
goto bad_offset;
default:
g_assert_not_reached();
}
break;
case A_SECDBGSTAT:
case A_PID4 ... A_CID3:
ro_offset:
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit SysCtl write: write of RO offset %x\n",
(int)offset);
break;
default:
bad_offset:
qemu_log_mask(LOG_GUEST_ERROR,
"IoTKit SysCtl write: bad offset %x\n", (int)offset);
break;
}
}
static const MemoryRegionOps iotkit_sysctl_ops = {
.read = iotkit_sysctl_read,
.write = iotkit_sysctl_write,
.endianness = DEVICE_LITTLE_ENDIAN,
/* byte/halfword accesses are just zero-padded on reads and writes */
.impl.min_access_size = 4,
.impl.max_access_size = 4,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
};
static void iotkit_sysctl_reset(DeviceState *dev)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(dev);
trace_iotkit_sysctl_reset();
s->secure_debug = 0;
s->reset_syndrome = 1;
s->reset_mask = 0;
s->gretreg = 0;
s->initsvtor0 = s->initsvtor0_rst;
s->initsvtor1 = s->initsvtor1_rst;
s->cpuwait = s->cpuwait_rst;
s->wicctrl = 0;
s->scsecctrl = 0;
s->fclk_div = 0;
s->sysclk_div = 0;
s->clock_force = 0;
s->nmi_enable = 0;
s->ewctrl = 0;
s->pwrctrl = 0x3;
s->pdcm_pd_sys_sense = 0x7f;
s->pdcm_pd_sram0_sense = 0;
s->pdcm_pd_sram1_sense = 0;
s->pdcm_pd_sram2_sense = 0;
s->pdcm_pd_sram3_sense = 0;
s->pdcm_pd_cpu0_sense = 0;
s->pdcm_pd_vmr0_sense = 0;
s->pdcm_pd_vmr1_sense = 0;
}
static void iotkit_sysctl_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
IoTKitSysCtl *s = IOTKIT_SYSCTL(obj);
memory_region_init_io(&s->iomem, obj, &iotkit_sysctl_ops,
s, "iotkit-sysctl", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
}
static void iotkit_sysctl_realize(DeviceState *dev, Error **errp)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(dev);
hw/arm/armsse: Introduce SSE subsystem version property We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-6-peter.maydell@linaro.org
2021-02-19 15:45:38 +01:00
if (!armsse_version_valid(s->sse_version)) {
error_setg(errp, "invalid sse-version value %d", s->sse_version);
return;
}
}
static bool sse300_needed(void *opaque)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque);
return s->sse_version == ARMSSE_SSE300;
}
static const VMStateDescription iotkit_sysctl_sse300_vmstate = {
.name = "iotkit-sysctl/sse-300",
.version_id = 1,
.minimum_version_id = 1,
.needed = sse300_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(pwrctrl, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_cpu0_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_vmr0_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_vmr1_sense, IoTKitSysCtl),
VMSTATE_END_OF_LIST()
}
};
static bool sse200_needed(void *opaque)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque);
hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-02-19 15:45:46 +01:00
return s->sse_version != ARMSSE_IOTKIT;
}
static const VMStateDescription iotkit_sysctl_sse200_vmstate = {
.name = "iotkit-sysctl/sse-200",
.version_id = 1,
.minimum_version_id = 1,
.needed = sse200_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(scsecctrl, IoTKitSysCtl),
VMSTATE_UINT32(fclk_div, IoTKitSysCtl),
VMSTATE_UINT32(sysclk_div, IoTKitSysCtl),
VMSTATE_UINT32(clock_force, IoTKitSysCtl),
VMSTATE_UINT32(initsvtor1, IoTKitSysCtl),
VMSTATE_UINT32(nmi_enable, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_sys_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_sram0_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_sram1_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_sram2_sense, IoTKitSysCtl),
VMSTATE_UINT32(pdcm_pd_sram3_sense, IoTKitSysCtl),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription iotkit_sysctl_vmstate = {
.name = "iotkit-sysctl",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(secure_debug, IoTKitSysCtl),
VMSTATE_UINT32(reset_syndrome, IoTKitSysCtl),
VMSTATE_UINT32(reset_mask, IoTKitSysCtl),
VMSTATE_UINT32(gretreg, IoTKitSysCtl),
VMSTATE_UINT32(initsvtor0, IoTKitSysCtl),
VMSTATE_UINT32(cpuwait, IoTKitSysCtl),
VMSTATE_UINT32(wicctrl, IoTKitSysCtl),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&iotkit_sysctl_sse200_vmstate,
&iotkit_sysctl_sse300_vmstate,
NULL
}
};
static Property iotkit_sysctl_props[] = {
hw/arm/armsse: Introduce SSE subsystem version property We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-6-peter.maydell@linaro.org
2021-02-19 15:45:38 +01:00
DEFINE_PROP_UINT32("sse-version", IoTKitSysCtl, sse_version, 0),
DEFINE_PROP_UINT32("CPUWAIT_RST", IoTKitSysCtl, cpuwait_rst, 0),
DEFINE_PROP_UINT32("INITSVTOR0_RST", IoTKitSysCtl, initsvtor0_rst,
0x10000000),
DEFINE_PROP_UINT32("INITSVTOR1_RST", IoTKitSysCtl, initsvtor1_rst,
0x10000000),
DEFINE_PROP_END_OF_LIST()
};
static void iotkit_sysctl_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->vmsd = &iotkit_sysctl_vmstate;
dc->reset = iotkit_sysctl_reset;
device_class_set_props(dc, iotkit_sysctl_props);
dc->realize = iotkit_sysctl_realize;
}
static const TypeInfo iotkit_sysctl_info = {
.name = TYPE_IOTKIT_SYSCTL,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(IoTKitSysCtl),
.instance_init = iotkit_sysctl_init,
.class_init = iotkit_sysctl_class_init,
};
static void iotkit_sysctl_register_types(void)
{
type_register_static(&iotkit_sysctl_info);
}
type_init(iotkit_sysctl_register_types);