OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
741258b06c
qemu-e2k/include/hw/misc/mps2-scc.h

70 lines
1.9 KiB
C
Raw Normal View History

hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
/*
* ARM MPS2 SCC emulation
*
* Copyright (c) 2017 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or
* (at your option) any later version.
*/
hw/misc/mps2-scc: Add "QEMU interface" comment The MPS2 SCC device doesn't have any documentation of its properties; add a "QEMU interface" format comment describing them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
2021-05-04 14:09:10 +02:00
/*
* This is a model of the Serial Communication Controller (SCC)
* block found in most MPS FPGA images.
*
* QEMU interface:
* + sysbus MMIO region 0: the register bank
* + QOM property "scc-cfg4": value of the read-only CFG4 register
* + QOM property "scc-aid": value of the read-only SCC_AID register
* + QOM property "scc-id": value of the read-only SCC_ID register
hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping On some boards, SCC config register CFG0 bit 0 controls whether parts of the board memory map are remapped. Support this with: * a device property scc-cfg0 so the board can specify the initial value of the CFG0 register * an outbound GPIO line which tracks bit 0 and which the board can wire up to provide the remapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
2021-05-04 14:09:11 +02:00
* + QOM property "scc-cfg0": reset value of the CFG0 register
hw/misc/mps2-scc: Add "QEMU interface" comment The MPS2 SCC device doesn't have any documentation of its properties; add a "QEMU interface" format comment describing them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
2021-05-04 14:09:10 +02:00
* + QOM property array "oscclk": reset values of the OSCCLK registers
* (which are accessed via the SYS_CFG channel provided by this device)
hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping On some boards, SCC config register CFG0 bit 0 controls whether parts of the board memory map are remapped. Support this with: * a device property scc-cfg0 so the board can specify the initial value of the CFG0 register * an outbound GPIO line which tracks bit 0 and which the board can wire up to provide the remapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
2021-05-04 14:09:11 +02:00
* + named GPIO output "remap": this tracks the value of CFG0 register
* bit 0. Boards where this bit controls memory remapping should
* connect this GPIO line to a function performing that mapping.
* Boards where bit 0 has no special function should leave the GPIO
* output disconnected.
hw/misc/mps2-scc: Add "QEMU interface" comment The MPS2 SCC device doesn't have any documentation of its properties; add a "QEMU interface" format comment describing them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
2021-05-04 14:09:10 +02:00
*/
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
#ifndef MPS2_SCC_H
#define MPS2_SCC_H
#include "hw/sysbus.h"
hw/misc/mps2-scc: Use the LED device Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This replaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-06-15 21:23:59 +02:00
#include "hw/misc/led.h"
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
#include "qom/object.h"
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
#define TYPE_MPS2_SCC "mps2-scc"
Use OBJECT_DECLARE_SIMPLE_TYPE when possible This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16 20:25:19 +02:00
OBJECT_DECLARE_SIMPLE_TYPE(MPS2SCC, MPS2_SCC)
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
struct MPS2SCC {
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
MemoryRegion iomem;
hw/misc/mps2-scc: Use the LED device Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This replaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-06-15 21:23:59 +02:00
LEDState *led[8];
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
uint32_t cfg0;
uint32_t cfg1;
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 The AN524 version of the SCC interface has different behaviour for some of the CFG registers; implement it. Each board in this family can have minor differences in the meaning of the CFG registers, so rather than trying to specify all the possible semantics via individual device properties, we make the behaviour conditional on the part-number field of the SCC_ID register which the board code already passes us. For the AN524, the differences are: * CFG3 is reserved rather than being board switches * CFG5 is a new register ("ACLK Frequency in Hz") * CFG6 is a new register ("Clock divider for BRAM") We implement both of the new registers as reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-11-peter.maydell@linaro.org
2021-02-15 12:51:24 +01:00
uint32_t cfg2;
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
uint32_t cfg4;
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 The AN524 version of the SCC interface has different behaviour for some of the CFG registers; implement it. Each board in this family can have minor differences in the meaning of the CFG registers, so rather than trying to specify all the possible semantics via individual device properties, we make the behaviour conditional on the part-number field of the SCC_ID register which the board code already passes us. For the AN524, the differences are: * CFG3 is reserved rather than being board switches * CFG5 is a new register ("ACLK Frequency in Hz") * CFG6 is a new register ("Clock divider for BRAM") We implement both of the new registers as reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-11-peter.maydell@linaro.org
2021-02-15 12:51:24 +01:00
uint32_t cfg5;
uint32_t cfg6;
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
uint32_t cfgdata_rtn;
uint32_t cfgdata_out;
uint32_t cfgctrl;
uint32_t cfgstat;
uint32_t dll;
uint32_t aid;
uint32_t id;
hw/misc/mps2-scc: Support configurable number of OSCCLK values Currently the MPS2 SCC device implements a fixed number of OSCCLK values (3). The variant of this device in the MPS3 AN524 board has 6 OSCCLK values. Switch to using a PROP_ARRAY, which allows board code to specify how large the OSCCLK array should be as well as its values. With a variable-length property array, the SCC no longer specifies default values for the OSCCLKs, so we must set them explicitly in the board code. This defaults are actually incorrect for the an521 and an505; we will correct this bug in a following patch. This is a migration compatibility break for all the mps boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-3-peter.maydell@linaro.org
2021-02-15 12:51:16 +01:00
uint32_t num_oscclk;
uint32_t *oscclk;
uint32_t *oscclk_reset;
hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping On some boards, SCC config register CFG0 bit 0 controls whether parts of the board memory map are remapped. Support this with: * a device property scc-cfg0 so the board can specify the initial value of the CFG0 register * an outbound GPIO line which tracks bit 0 and which the board can wire up to provide the remapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
2021-05-04 14:09:11 +02:00
uint32_t cfg0_reset;
qemu_irq remap;
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
};
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 14:36:08 +02:00
#endif
Reference in New Issue Copy Permalink