441 lines
15 KiB
C
441 lines
15 KiB
C
|
/*
|
||
|
* ARM Aspeed I2C controller
|
||
|
*
|
||
|
* Copyright (C) 2016 IBM Corp.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* as published by the Free Software Foundation; either version 2
|
||
|
* of the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include "qemu/osdep.h"
|
||
|
#include "hw/sysbus.h"
|
||
|
#include "qemu/log.h"
|
||
|
#include "hw/i2c/aspeed_i2c.h"
|
||
|
|
||
|
/* I2C Global Register */
|
||
|
|
||
|
#define I2C_CTRL_STATUS 0x00 /* Device Interrupt Status */
|
||
|
#define I2C_CTRL_ASSIGN 0x08 /* Device Interrupt Target
|
||
|
Assignment */
|
||
|
|
||
|
/* I2C Device (Bus) Register */
|
||
|
|
||
|
#define I2CD_FUN_CTRL_REG 0x00 /* I2CD Function Control */
|
||
|
#define I2CD_BUFF_SEL_MASK (0x7 << 20)
|
||
|
#define I2CD_BUFF_SEL(x) (x << 20)
|
||
|
#define I2CD_M_SDA_LOCK_EN (0x1 << 16)
|
||
|
#define I2CD_MULTI_MASTER_DIS (0x1 << 15)
|
||
|
#define I2CD_M_SCL_DRIVE_EN (0x1 << 14)
|
||
|
#define I2CD_MSB_STS (0x1 << 9)
|
||
|
#define I2CD_SDA_DRIVE_1T_EN (0x1 << 8)
|
||
|
#define I2CD_M_SDA_DRIVE_1T_EN (0x1 << 7)
|
||
|
#define I2CD_M_HIGH_SPEED_EN (0x1 << 6)
|
||
|
#define I2CD_DEF_ADDR_EN (0x1 << 5)
|
||
|
#define I2CD_DEF_ALERT_EN (0x1 << 4)
|
||
|
#define I2CD_DEF_ARP_EN (0x1 << 3)
|
||
|
#define I2CD_DEF_GCALL_EN (0x1 << 2)
|
||
|
#define I2CD_SLAVE_EN (0x1 << 1)
|
||
|
#define I2CD_MASTER_EN (0x1)
|
||
|
|
||
|
#define I2CD_AC_TIMING_REG1 0x04 /* Clock and AC Timing Control #1 */
|
||
|
#define I2CD_AC_TIMING_REG2 0x08 /* Clock and AC Timing Control #1 */
|
||
|
#define I2CD_INTR_CTRL_REG 0x0c /* I2CD Interrupt Control */
|
||
|
#define I2CD_INTR_STS_REG 0x10 /* I2CD Interrupt Status */
|
||
|
#define I2CD_INTR_SDA_DL_TIMEOUT (0x1 << 14)
|
||
|
#define I2CD_INTR_BUS_RECOVER_DONE (0x1 << 13)
|
||
|
#define I2CD_INTR_SMBUS_ALERT (0x1 << 12) /* Bus [0-3] only */
|
||
|
#define I2CD_INTR_SMBUS_ARP_ADDR (0x1 << 11) /* Removed */
|
||
|
#define I2CD_INTR_SMBUS_DEV_ALERT_ADDR (0x1 << 10) /* Removed */
|
||
|
#define I2CD_INTR_SMBUS_DEF_ADDR (0x1 << 9) /* Removed */
|
||
|
#define I2CD_INTR_GCALL_ADDR (0x1 << 8) /* Removed */
|
||
|
#define I2CD_INTR_SLAVE_MATCH (0x1 << 7) /* use RX_DONE */
|
||
|
#define I2CD_INTR_SCL_TIMEOUT (0x1 << 6)
|
||
|
#define I2CD_INTR_ABNORMAL (0x1 << 5)
|
||
|
#define I2CD_INTR_NORMAL_STOP (0x1 << 4)
|
||
|
#define I2CD_INTR_ARBIT_LOSS (0x1 << 3)
|
||
|
#define I2CD_INTR_RX_DONE (0x1 << 2)
|
||
|
#define I2CD_INTR_TX_NAK (0x1 << 1)
|
||
|
#define I2CD_INTR_TX_ACK (0x1 << 0)
|
||
|
|
||
|
#define I2CD_CMD_REG 0x14 /* I2CD Command/Status */
|
||
|
#define I2CD_SDA_OE (0x1 << 28)
|
||
|
#define I2CD_SDA_O (0x1 << 27)
|
||
|
#define I2CD_SCL_OE (0x1 << 26)
|
||
|
#define I2CD_SCL_O (0x1 << 25)
|
||
|
#define I2CD_TX_TIMING (0x1 << 24)
|
||
|
#define I2CD_TX_STATUS (0x1 << 23)
|
||
|
|
||
|
#define I2CD_TX_STATE_SHIFT 19 /* Tx State Machine */
|
||
|
#define I2CD_TX_STATE_MASK 0xf
|
||
|
#define I2CD_IDLE 0x0
|
||
|
#define I2CD_MACTIVE 0x8
|
||
|
#define I2CD_MSTART 0x9
|
||
|
#define I2CD_MSTARTR 0xa
|
||
|
#define I2CD_MSTOP 0xb
|
||
|
#define I2CD_MTXD 0xc
|
||
|
#define I2CD_MRXACK 0xd
|
||
|
#define I2CD_MRXD 0xe
|
||
|
#define I2CD_MTXACK 0xf
|
||
|
#define I2CD_SWAIT 0x1
|
||
|
#define I2CD_SRXD 0x4
|
||
|
#define I2CD_STXACK 0x5
|
||
|
#define I2CD_STXD 0x6
|
||
|
#define I2CD_SRXACK 0x7
|
||
|
#define I2CD_RECOVER 0x3
|
||
|
|
||
|
#define I2CD_SCL_LINE_STS (0x1 << 18)
|
||
|
#define I2CD_SDA_LINE_STS (0x1 << 17)
|
||
|
#define I2CD_BUS_BUSY_STS (0x1 << 16)
|
||
|
#define I2CD_SDA_OE_OUT_DIR (0x1 << 15)
|
||
|
#define I2CD_SDA_O_OUT_DIR (0x1 << 14)
|
||
|
#define I2CD_SCL_OE_OUT_DIR (0x1 << 13)
|
||
|
#define I2CD_SCL_O_OUT_DIR (0x1 << 12)
|
||
|
#define I2CD_BUS_RECOVER_CMD_EN (0x1 << 11)
|
||
|
#define I2CD_S_ALT_EN (0x1 << 10)
|
||
|
#define I2CD_RX_DMA_ENABLE (0x1 << 9)
|
||
|
#define I2CD_TX_DMA_ENABLE (0x1 << 8)
|
||
|
|
||
|
/* Command Bit */
|
||
|
#define I2CD_M_STOP_CMD (0x1 << 5)
|
||
|
#define I2CD_M_S_RX_CMD_LAST (0x1 << 4)
|
||
|
#define I2CD_M_RX_CMD (0x1 << 3)
|
||
|
#define I2CD_S_TX_CMD (0x1 << 2)
|
||
|
#define I2CD_M_TX_CMD (0x1 << 1)
|
||
|
#define I2CD_M_START_CMD (0x1)
|
||
|
|
||
|
#define I2CD_DEV_ADDR_REG 0x18 /* Slave Device Address */
|
||
|
#define I2CD_BUF_CTRL_REG 0x1c /* Pool Buffer Control */
|
||
|
#define I2CD_BYTE_BUF_REG 0x20 /* Transmit/Receive Byte Buffer */
|
||
|
#define I2CD_BYTE_BUF_TX_SHIFT 0
|
||
|
#define I2CD_BYTE_BUF_TX_MASK 0xff
|
||
|
#define I2CD_BYTE_BUF_RX_SHIFT 8
|
||
|
#define I2CD_BYTE_BUF_RX_MASK 0xff
|
||
|
|
||
|
|
||
|
static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus)
|
||
|
{
|
||
|
return bus->ctrl & I2CD_MASTER_EN;
|
||
|
}
|
||
|
|
||
|
static inline bool aspeed_i2c_bus_is_enabled(AspeedI2CBus *bus)
|
||
|
{
|
||
|
return bus->ctrl & (I2CD_MASTER_EN | I2CD_SLAVE_EN);
|
||
|
}
|
||
|
|
||
|
static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus)
|
||
|
{
|
||
|
bus->intr_status &= bus->intr_ctrl;
|
||
|
if (bus->intr_status) {
|
||
|
bus->controller->intr_status |= 1 << bus->id;
|
||
|
qemu_irq_raise(bus->controller->irq);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset,
|
||
|
unsigned size)
|
||
|
{
|
||
|
AspeedI2CBus *bus = opaque;
|
||
|
|
||
|
switch (offset) {
|
||
|
case I2CD_FUN_CTRL_REG:
|
||
|
return bus->ctrl;
|
||
|
case I2CD_AC_TIMING_REG1:
|
||
|
return bus->timing[0];
|
||
|
case I2CD_AC_TIMING_REG2:
|
||
|
return bus->timing[1];
|
||
|
case I2CD_INTR_CTRL_REG:
|
||
|
return bus->intr_ctrl;
|
||
|
case I2CD_INTR_STS_REG:
|
||
|
return bus->intr_status;
|
||
|
case I2CD_BYTE_BUF_REG:
|
||
|
return bus->buf;
|
||
|
case I2CD_CMD_REG:
|
||
|
return bus->cmd | (i2c_bus_busy(bus->bus) << 16);
|
||
|
default:
|
||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||
|
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
|
||
|
{
|
||
|
bus->cmd |= value & 0xFFFF;
|
||
|
bus->intr_status = 0;
|
||
|
|
||
|
if (bus->cmd & I2CD_M_START_CMD) {
|
||
|
if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7),
|
||
|
extract32(bus->buf, 0, 1))) {
|
||
|
bus->intr_status |= I2CD_INTR_TX_NAK;
|
||
|
} else {
|
||
|
bus->intr_status |= I2CD_INTR_TX_ACK;
|
||
|
}
|
||
|
|
||
|
} else if (bus->cmd & I2CD_M_TX_CMD) {
|
||
|
if (i2c_send(bus->bus, bus->buf)) {
|
||
|
bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL);
|
||
|
i2c_end_transfer(bus->bus);
|
||
|
} else {
|
||
|
bus->intr_status |= I2CD_INTR_TX_ACK;
|
||
|
}
|
||
|
|
||
|
} else if (bus->cmd & I2CD_M_RX_CMD) {
|
||
|
int ret = i2c_recv(bus->bus);
|
||
|
if (ret < 0) {
|
||
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
|
||
|
ret = 0xff;
|
||
|
} else {
|
||
|
bus->intr_status |= I2CD_INTR_RX_DONE;
|
||
|
}
|
||
|
bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
|
||
|
}
|
||
|
|
||
|
if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) {
|
||
|
if (!i2c_bus_busy(bus->bus)) {
|
||
|
bus->intr_status |= I2CD_INTR_ABNORMAL;
|
||
|
} else {
|
||
|
i2c_end_transfer(bus->bus);
|
||
|
bus->intr_status |= I2CD_INTR_NORMAL_STOP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* command is handled, reset it and check for interrupts */
|
||
|
bus->cmd &= ~0xFFFF;
|
||
|
aspeed_i2c_bus_raise_interrupt(bus);
|
||
|
}
|
||
|
|
||
|
static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
|
||
|
uint64_t value, unsigned size)
|
||
|
{
|
||
|
AspeedI2CBus *bus = opaque;
|
||
|
|
||
|
switch (offset) {
|
||
|
case I2CD_FUN_CTRL_REG:
|
||
|
if (value & I2CD_SLAVE_EN) {
|
||
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
||
|
__func__);
|
||
|
break;
|
||
|
}
|
||
|
bus->ctrl = value & 0x0071C3FF;
|
||
|
break;
|
||
|
case I2CD_AC_TIMING_REG1:
|
||
|
bus->timing[0] = value & 0xFFFFF0F;
|
||
|
break;
|
||
|
case I2CD_AC_TIMING_REG2:
|
||
|
bus->timing[1] = value & 0x7;
|
||
|
break;
|
||
|
case I2CD_INTR_CTRL_REG:
|
||
|
bus->intr_ctrl = value & 0x7FFF;
|
||
|
break;
|
||
|
case I2CD_INTR_STS_REG:
|
||
|
bus->intr_status &= ~(value & 0x7FFF);
|
||
|
bus->controller->intr_status &= ~(1 << bus->id);
|
||
|
qemu_irq_lower(bus->controller->irq);
|
||
|
break;
|
||
|
case I2CD_DEV_ADDR_REG:
|
||
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
||
|
__func__);
|
||
|
break;
|
||
|
case I2CD_BYTE_BUF_REG:
|
||
|
bus->buf = (value & I2CD_BYTE_BUF_TX_MASK) << I2CD_BYTE_BUF_TX_SHIFT;
|
||
|
break;
|
||
|
case I2CD_CMD_REG:
|
||
|
if (!aspeed_i2c_bus_is_enabled(bus)) {
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (!aspeed_i2c_bus_is_master(bus)) {
|
||
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
||
|
__func__);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
aspeed_i2c_bus_handle_cmd(bus, value);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
||
|
__func__, offset);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset,
|
||
|
unsigned size)
|
||
|
{
|
||
|
AspeedI2CState *s = opaque;
|
||
|
|
||
|
switch (offset) {
|
||
|
case I2C_CTRL_STATUS:
|
||
|
return s->intr_status;
|
||
|
default:
|
||
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
||
|
__func__, offset);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset,
|
||
|
uint64_t value, unsigned size)
|
||
|
{
|
||
|
switch (offset) {
|
||
|
case I2C_CTRL_STATUS:
|
||
|
default:
|
||
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
||
|
__func__, offset);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static const MemoryRegionOps aspeed_i2c_bus_ops = {
|
||
|
.read = aspeed_i2c_bus_read,
|
||
|
.write = aspeed_i2c_bus_write,
|
||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||
|
};
|
||
|
|
||
|
static const MemoryRegionOps aspeed_i2c_ctrl_ops = {
|
||
|
.read = aspeed_i2c_ctrl_read,
|
||
|
.write = aspeed_i2c_ctrl_write,
|
||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||
|
};
|
||
|
|
||
|
static const VMStateDescription aspeed_i2c_bus_vmstate = {
|
||
|
.name = TYPE_ASPEED_I2C,
|
||
|
.version_id = 1,
|
||
|
.minimum_version_id = 1,
|
||
|
.fields = (VMStateField[]) {
|
||
|
VMSTATE_UINT8(id, AspeedI2CBus),
|
||
|
VMSTATE_UINT32(ctrl, AspeedI2CBus),
|
||
|
VMSTATE_UINT32_ARRAY(timing, AspeedI2CBus, 2),
|
||
|
VMSTATE_UINT32(intr_ctrl, AspeedI2CBus),
|
||
|
VMSTATE_UINT32(intr_status, AspeedI2CBus),
|
||
|
VMSTATE_UINT32(cmd, AspeedI2CBus),
|
||
|
VMSTATE_UINT32(buf, AspeedI2CBus),
|
||
|
VMSTATE_END_OF_LIST()
|
||
|
}
|
||
|
};
|
||
|
|
||
|
static const VMStateDescription aspeed_i2c_vmstate = {
|
||
|
.name = TYPE_ASPEED_I2C,
|
||
|
.version_id = 1,
|
||
|
.minimum_version_id = 1,
|
||
|
.fields = (VMStateField[]) {
|
||
|
VMSTATE_UINT32(intr_status, AspeedI2CState),
|
||
|
VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState,
|
||
|
ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate,
|
||
|
AspeedI2CBus),
|
||
|
VMSTATE_END_OF_LIST()
|
||
|
}
|
||
|
};
|
||
|
|
||
|
static void aspeed_i2c_reset(DeviceState *dev)
|
||
|
{
|
||
|
int i;
|
||
|
AspeedI2CState *s = ASPEED_I2C(dev);
|
||
|
|
||
|
s->intr_status = 0;
|
||
|
|
||
|
for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) {
|
||
|
s->busses[i].intr_ctrl = 0;
|
||
|
s->busses[i].intr_status = 0;
|
||
|
s->busses[i].cmd = 0;
|
||
|
s->busses[i].buf = 0;
|
||
|
i2c_end_transfer(s->busses[i].bus);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Address Definitions
|
||
|
*
|
||
|
* 0x000 ... 0x03F: Global Register
|
||
|
* 0x040 ... 0x07F: Device 1
|
||
|
* 0x080 ... 0x0BF: Device 2
|
||
|
* 0x0C0 ... 0x0FF: Device 3
|
||
|
* 0x100 ... 0x13F: Device 4
|
||
|
* 0x140 ... 0x17F: Device 5
|
||
|
* 0x180 ... 0x1BF: Device 6
|
||
|
* 0x1C0 ... 0x1FF: Device 7
|
||
|
* 0x200 ... 0x2FF: Buffer Pool (unused in linux driver)
|
||
|
* 0x300 ... 0x33F: Device 8
|
||
|
* 0x340 ... 0x37F: Device 9
|
||
|
* 0x380 ... 0x3BF: Device 10
|
||
|
* 0x3C0 ... 0x3FF: Device 11
|
||
|
* 0x400 ... 0x43F: Device 12
|
||
|
* 0x440 ... 0x47F: Device 13
|
||
|
* 0x480 ... 0x4BF: Device 14
|
||
|
* 0x800 ... 0xFFF: Buffer Pool (unused in linux driver)
|
||
|
*/
|
||
|
static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
|
||
|
{
|
||
|
int i;
|
||
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
||
|
AspeedI2CState *s = ASPEED_I2C(dev);
|
||
|
|
||
|
sysbus_init_irq(sbd, &s->irq);
|
||
|
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s,
|
||
|
"aspeed.i2c", 0x1000);
|
||
|
sysbus_init_mmio(sbd, &s->iomem);
|
||
|
|
||
|
for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) {
|
||
|
char name[16];
|
||
|
int offset = i < 7 ? 1 : 5;
|
||
|
snprintf(name, sizeof(name), "aspeed.i2c.%d", i);
|
||
|
s->busses[i].controller = s;
|
||
|
s->busses[i].id = i;
|
||
|
s->busses[i].bus = i2c_init_bus(dev, name);
|
||
|
memory_region_init_io(&s->busses[i].mr, OBJECT(dev),
|
||
|
&aspeed_i2c_bus_ops, &s->busses[i], name, 0x40);
|
||
|
memory_region_add_subregion(&s->iomem, 0x40 * (i + offset),
|
||
|
&s->busses[i].mr);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void aspeed_i2c_class_init(ObjectClass *klass, void *data)
|
||
|
{
|
||
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
||
|
|
||
|
dc->vmsd = &aspeed_i2c_vmstate;
|
||
|
dc->reset = aspeed_i2c_reset;
|
||
|
dc->realize = aspeed_i2c_realize;
|
||
|
dc->desc = "Aspeed I2C Controller";
|
||
|
}
|
||
|
|
||
|
static const TypeInfo aspeed_i2c_info = {
|
||
|
.name = TYPE_ASPEED_I2C,
|
||
|
.parent = TYPE_SYS_BUS_DEVICE,
|
||
|
.instance_size = sizeof(AspeedI2CState),
|
||
|
.class_init = aspeed_i2c_class_init,
|
||
|
};
|
||
|
|
||
|
static void aspeed_i2c_register_types(void)
|
||
|
{
|
||
|
type_register_static(&aspeed_i2c_info);
|
||
|
}
|
||
|
|
||
|
type_init(aspeed_i2c_register_types)
|
||
|
|
||
|
|
||
|
I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr)
|
||
|
{
|
||
|
AspeedI2CState *s = ASPEED_I2C(dev);
|
||
|
I2CBus *bus = NULL;
|
||
|
|
||
|
if (busnr >= 0 && busnr < ASPEED_I2C_NR_BUSSES) {
|
||
|
bus = s->busses[busnr].bus;
|
||
|
}
|
||
|
|
||
|
return bus;
|
||
|
}
|