qemu-e2k/docs/devel/tracing.rst

416 lines
15 KiB
ReStructuredText
Raw Normal View History

.. _tracing:
=======
Tracing
=======
Introduction
============
This document describes the tracing infrastructure in QEMU and how to use it
for debugging, profiling, and observing execution.
Quickstart
==========
Enable tracing of ``memory_region_ops_read`` and ``memory_region_ops_write``
events::
$ qemu --trace "memory_region_ops_*" ...
...
719585@1608130130.441188:memory_region_ops_read cpu 0 mr 0x562fdfbb3820 addr 0x3cc value 0x67 size 1
719585@1608130130.441190:memory_region_ops_write cpu 0 mr 0x562fdfbd2f00 addr 0x3d4 value 0x70e size 2
This output comes from the "log" trace backend that is enabled by default when
``./configure --enable-trace-backends=BACKENDS`` was not explicitly specified.
Multiple patterns can be specified by repeating the ``--trace`` option::
$ qemu --trace "kvm_*" --trace "virtio_*" ...
When patterns are used frequently it is more convenient to store them in a
file to avoid long command-line options::
$ echo "memory_region_ops_*" >/tmp/events
$ echo "kvm_*" >>/tmp/events
$ qemu --trace events=/tmp/events ...
Trace events
============
Sub-directory setup
-------------------
Each directory in the source tree can declare a set of trace events in a local
"trace-events" file. All directories which contain "trace-events" files must be
listed in the "trace_events_subdirs" variable in the top level meson.build
file. During build, the "trace-events" file in each listed subdirectory will be
processed by the "tracetool" script to generate code for the trace events.
The individual "trace-events" files are merged into a "trace-events-all" file,
which is also installed into "/usr/share/qemu".
This merged file is to be used by the "simpletrace.py" script to later analyse
traces in the simpletrace data format.
The following files are automatically generated in <builddir>/trace/ during the
build:
- trace-<subdir>.c - the trace event state declarations
- trace-<subdir>.h - the trace event enums and probe functions
- trace-dtrace-<subdir>.h - DTrace event probe specification
- trace-dtrace-<subdir>.dtrace - DTrace event probe helper declaration
- trace-dtrace-<subdir>.o - binary DTrace provider (generated by dtrace)
- trace-ust-<subdir>.h - UST event probe helper declarations
Here <subdir> is the sub-directory path with '/' replaced by '_'. For example,
"accel/kvm" becomes "accel_kvm" and the final filename for "trace-<subdir>.c"
becomes "trace-accel_kvm.c".
Source files in the source tree do not directly include generated files in
"<builddir>/trace/". Instead they #include the local "trace.h" file, without
any sub-directory path prefix. eg io/channel-buffer.c would do::
#include "trace.h"
The "io/trace.h" file must be created manually with an #include of the
corresponding "trace/trace-<subdir>.h" file that will be generated in the
builddir::
$ echo '#include "trace/trace-io.h"' >io/trace.h
While it is possible to include a trace.h file from outside a source file's own
sub-directory, this is discouraged in general. It is strongly preferred that
all events be declared directly in the sub-directory that uses them. The only
exception is where there are some shared trace events defined in the top level
directory trace-events file. The top level directory generates trace files
with a filename prefix of "trace/trace-root" instead of just "trace". This is
to avoid ambiguity between a trace.h in the current directory, vs the top level
directory.
Using trace events
------------------
Trace events are invoked directly from source code like this::
#include "trace.h" /* needed for trace event prototype */
void *qemu_vmalloc(size_t size)
{
void *ptr;
size_t align = QEMU_VMALLOC_ALIGN;
if (size < align) {
align = getpagesize();
}
ptr = qemu_memalign(align, size);
trace_qemu_vmalloc(size, ptr);
return ptr;
}
Declaring trace events
----------------------
The "tracetool" script produces the trace.h header file which is included by
every source file that uses trace events. Since many source files include
trace.h, it uses a minimum of types and other header files included to keep the
namespace clean and compile times and dependencies down.
Trace events should use types as follows:
* Use stdint.h types for fixed-size types. Most offsets and guest memory
addresses are best represented with uint32_t or uint64_t. Use fixed-size
types over primitive types whose size may change depending on the host
(32-bit versus 64-bit) so trace events don't truncate values or break
the build.
* Use void * for pointers to structs or for arrays. The trace.h header
cannot include all user-defined struct declarations and it is therefore
necessary to use void * for pointers to structs.
* For everything else, use primitive scalar types (char, int, long) with the
appropriate signedness.
* Avoid floating point types (float and double) because SystemTap does not
support them. In most cases it is possible to round to an integer type
instead. This may require scaling the value first by multiplying it by 1000
or the like when digits after the decimal point need to be preserved.
Format strings should reflect the types defined in the trace event. Take
special care to use PRId64 and PRIu64 for int64_t and uint64_t types,
respectively. This ensures portability between 32- and 64-bit platforms.
Format strings must not end with a newline character. It is the responsibility
of backends to adapt line ending for proper logging.
Each event declaration will start with the event name, then its arguments,
finally a format string for pretty-printing. For example::
qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p"
qemu_vfree(void *ptr) "ptr %p"
Hints for adding new trace events
---------------------------------
1. Trace state changes in the code. Interesting points in the code usually
involve a state change like starting, stopping, allocating, freeing. State
changes are good trace events because they can be used to understand the
execution of the system.
2. Trace guest operations. Guest I/O accesses like reading device registers
are good trace events because they can be used to understand guest
interactions.
3. Use correlator fields so the context of an individual line of trace output
can be understood. For example, trace the pointer returned by malloc and
used as an argument to free. This way mallocs and frees can be matched up.
Trace events with no context are not very useful.
4. Name trace events after their function. If there are multiple trace events
in one function, append a unique distinguisher at the end of the name.
Generic interface and monitor commands
======================================
You can programmatically query and control the state of trace events through a
backend-agnostic interface provided by the header "trace/control.h".
Note that some of the backends do not provide an implementation for some parts
of this interface, in which case QEMU will just print a warning (please refer to
header "trace/control.h" to see which routines are backend-dependent).
The state of events can also be queried and modified through monitor commands:
* ``info trace-events``
View available trace events and their state. State 1 means enabled, state 0
means disabled.
* ``trace-event NAME on|off``
Enable/disable a given trace event or a group of events (using wildcards).
The "--trace events=<file>" command line argument can be used to enable the
events listed in <file> from the very beginning of the program. This file must
contain one event name per line.
If a line in the "--trace events=<file>" file begins with a '-', the trace event
will be disabled instead of enabled. This is useful when a wildcard was used
to enable an entire family of events but one noisy event needs to be disabled.
Wildcard matching is supported in both the monitor command "trace-event" and the
events list file. That means you can enable/disable the events having a common
prefix in a batch. For example, virtio-blk trace events could be enabled using
the following monitor command::
trace-event virtio_blk_* on
Trace backends
==============
The "tracetool" script automates tedious trace event code generation and also
keeps the trace event declarations independent of the trace backend. The trace
events are not tightly coupled to a specific trace backend, such as LTTng or
SystemTap. Support for trace backends can be added by extending the "tracetool"
script.
The trace backends are chosen at configure time::
./configure --enable-trace-backends=simple,dtrace
For a list of supported trace backends, try ./configure --help or see below.
If multiple backends are enabled, the trace is sent to them all.
If no backends are explicitly selected, configure will default to the
"log" backend.
The following subsections describe the supported trace backends.
Nop
---
The "nop" backend generates empty trace event functions so that the compiler
can optimize out trace events completely. This imposes no performance
penalty.
Note that regardless of the selected trace backend, events with the "disable"
property will be generated with the "nop" backend.
Log
---
The "log" backend sends trace events directly to standard error. This
effectively turns trace events into debug printfs.
This is the simplest backend and can be used together with existing code that
uses DPRINTF().
The -msg timestamp=on|off command-line option controls whether or not to print
the tid/timestamp prefix for each trace event.
Simpletrace
-----------
The "simple" backend writes binary trace logs to a file from a thread, making
it lower overhead than the "log" backend. A Python API is available for writing
offline trace file analysis scripts. It may not be as powerful as
platform-specific or third-party trace backends but it is portable and has no
special library dependencies.
Monitor commands
~~~~~~~~~~~~~~~~
* ``trace-file on|off|flush|set <path>``
Enable/disable/flush the trace file or set the trace file name.
Analyzing trace files
~~~~~~~~~~~~~~~~~~~~~
The "simple" backend produces binary trace files that can be formatted with the
simpletrace.py script. The script takes the "trace-events-all" file and the
binary trace::
./scripts/simpletrace.py trace-events-all trace-12345
You must ensure that the same "trace-events-all" file was used to build QEMU,
otherwise trace event declarations may have changed and output will not be
consistent.
Ftrace
------
The "ftrace" backend writes trace data to ftrace marker. This effectively
sends trace events to ftrace ring buffer, and you can compare qemu trace
data and kernel(especially kvm.ko when using KVM) trace data.
if you use KVM, enable kvm events in ftrace::
# echo 1 > /sys/kernel/debug/tracing/events/kvm/enable
After running qemu by root user, you can get the trace::
# cat /sys/kernel/debug/tracing/trace
Restriction: "ftrace" backend is restricted to Linux only.
Syslog
------
The "syslog" backend sends trace events using the POSIX syslog API. The log
is opened specifying the LOG_DAEMON facility and LOG_PID option (so events
are tagged with the pid of the particular QEMU process that generated
them). All events are logged at LOG_INFO level.
NOTE: syslog may squash duplicate consecutive trace events and apply rate
limiting.
Restriction: "syslog" backend is restricted to POSIX compliant OS.
LTTng Userspace Tracer
----------------------
The "ust" backend uses the LTTng Userspace Tracer library. There are no
monitor commands built into QEMU, instead UST utilities should be used to list,
enable/disable, and dump traces.
Package lttng-tools is required for userspace tracing. You must ensure that the
current user belongs to the "tracing" group, or manually launch the
lttng-sessiond daemon for the current user prior to running any instance of
QEMU.
While running an instrumented QEMU, LTTng should be able to list all available
events::
lttng list -u
Create tracing session::
lttng create mysession
Enable events::
lttng enable-event qemu:g_malloc -u
Where the events can either be a comma-separated list of events, or "-a" to
enable all tracepoint events. Start and stop tracing as needed::
lttng start
lttng stop
View the trace::
lttng view
Destroy tracing session::
lttng destroy
Babeltrace can be used at any later time to view the trace::
babeltrace $HOME/lttng-traces/mysession-<date>-<time>
SystemTap
---------
The "dtrace" backend uses DTrace sdt probes but has only been tested with
SystemTap. When SystemTap support is detected a .stp file with wrapper probes
is generated to make use in scripts more convenient. This step can also be
performed manually after a build in order to change the binary name in the .stp
probes::
scripts/tracetool.py --backends=dtrace --format=stap \
--binary path/to/qemu-binary \
--target-type system \
--target-name x86_64 \
--group=all \
trace-events-all \
qemu.stp
trace: add ability to do simple printf logging via systemtap The dtrace systemtap trace backend for QEMU is very powerful but it is also somewhat unfriendly to users who aren't familiar with systemtap, or who don't need its power right now. stap -e "....some strange script...." The 'log' backend for QEMU by comparison is very crude but incredibly easy to use: $ qemu -d trace:qio* ...some args... 23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400 23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000 23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90 23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570 23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90 23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400 This commit introduces a way to do simple printf style logging of probe points using systemtap. In particular it creates another set of tapsets, one per emulator: /usr/share/systemtap/tapset/qemu-*-log.stp These pre-define probe functions which simply call printf() on their arguments. The printf() format string is taken from the normal trace-events files, with a little munging to the format specifiers to cope with systemtap's more restrictive syntax. With this you can now do $ stap -e 'probe qemu.system.x86_64.log.qio*{}' 22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00 22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400 22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70 22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0 We go one step further though and introduce a 'qemu-trace-stap' tool to make this even easier $ qemu-trace-stap run qemu-system-x86_64 'qio*' 22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00 22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400 22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70 22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0 This tool is clever in that it will automatically change the SYSTEMTAP_TAPSET env variable to point to the directory containing the right set of probes for the QEMU binary path you give it. This is useful if you have QEMU installed in /usr but are trying to test and trace a binary in /home/berrange/usr/qemu-git. In that case you'd do $ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*' And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset is used for the trace session The 'qemu-trace-stap' script takes a verbose arg so you can understand what it is running $ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*' Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64' Compiling script 'probe qemu.system.x86_64.log.qio* {}' Running script, <Ctrl>-c to quit ...trace output... It can enable multiple probes at once $ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*' By default it monitors all existing running processes and all future launched proceses. This can be restricted to a specific PID using the --pid arg $ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*' Finally if you can't remember what probes are valid it can tell you $ qemu-trace-stap list qemu-system-x86_64 ahci_check_irq ahci_cmd_done ahci_dma_prepare_buf ahci_dma_prepare_buf_fail ahci_dma_rw_buf ahci_irq_lower ...snip... Or list just those matching a prefix pattern $ qemu-trace-stap list -v qemu-system-x86_64 'qio*' Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64' Listing probes with name 'qemu.system.x86_64.log.qio*' qio_channel_command_abort qio_channel_command_new_pid qio_channel_command_new_spawn qio_channel_command_wait qio_channel_file_new_fd ...snip... Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190123120016.4538-5-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-23 13:00:16 +01:00
To facilitate simple usage of systemtap where there merely needs to be printf
logging of certain probes, a helper script "qemu-trace-stap" is provided.
Consult its manual page for guidance on its usage.
Trace event properties
======================
Each event in the "trace-events-all" file can be prefixed with a space-separated
list of zero or more of the following event properties.
"disable"
---------
If a specific trace event is going to be invoked a huge number of times, this
might have a noticeable performance impact even when the event is
programmatically disabled.
In this case you should declare such event with the "disable" property. This
will effectively disable the event at compile time (by using the "nop" backend),
thus having no performance impact at all on regular builds (i.e., unless you
edit the "trace-events-all" file).
In addition, there might be cases where relatively complex computations must be
performed to generate values that are only used as arguments for a trace
function. In these cases you can use 'trace_event_get_state_backends()' to
guard such computations, so they are skipped if the event has been either
compile-time disabled or run-time disabled. If the event is compile-time
disabled, this check will have no performance impact.
::
#include "trace.h" /* needed for trace event prototype */
void *qemu_vmalloc(size_t size)
{
void *ptr;
size_t align = QEMU_VMALLOC_ALIGN;
if (size < align) {
align = getpagesize();
}
ptr = qemu_memalign(align, size);
if (trace_event_get_state_backends(TRACE_QEMU_VMALLOC)) {
void *complex;
/* some complex computations to produce the 'complex' value */
trace_qemu_vmalloc(size, ptr, complex);
}
return ptr;
}