qemu-e2k/tests/qemu-iotests/195.out

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

81 lines
1.5 KiB
Plaintext
Raw Normal View History

QA output created by 195
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 22:39:52 +02:00
Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT
Change backing file of mid (opened read-only)
Testing: -drive if=none,file=TEST_DIR/t.IMGFMT,backing.node-name=mid
{
QMP_VERSION
}
{
"return": {
}
}
{
"return": {
}
}
{
"timestamp": {
"seconds": TIMESTAMP,
"microseconds": TIMESTAMP
},
"event": "SHUTDOWN",
"data": {
"guest": false,
"reason": "host-qmp-quit"
}
}
monitor: only run coroutine commands in qemu_aio_context monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedules itself in the main loop's qemu_aio_context AioContext, which is polled during nested event loops. One known problem is that QMP device-add calls drain_call_rcu(), which temporarily drops the BQL, leading to all sorts of havoc like other vCPU threads re-entering device emulation code while another vCPU thread is waiting in device emulation code with aio_poll(). Paolo Bonzini suggested running non-coroutine QMP handlers in the iohandler AioContext. This avoids trouble with nested event loops. His original idea was to move coroutine rescheduling to monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch() because we don't know if the QMP handler needs to run in coroutine context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have been nicer since it's associated with the monitor implementation and not as general as qmp_dispatch(), which is also used by qemu-ga. A number of qemu-iotests need updated .out files because the order of QMP events vs QMP responses has changed. Solves Issue #1933. Cc: qemu-stable@nongnu.org Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985 Buglink: https://issues.redhat.com/browse/RHEL-17369 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240118144823.1497953-4-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-01-18 15:48:23 +01:00
{
"return": {
}
}
image: TEST_DIR/t.IMGFMT.mid
file format: IMGFMT
virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
backing file: /dev/null
backing file format: IMGFMT
Change backing file of top (opened writable)
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 22:39:52 +02:00
Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
Testing: -drive if=none,file=TEST_DIR/t.IMGFMT,node-name=top
{
QMP_VERSION
}
{
"return": {
}
}
{
"return": {
}
}
{
"timestamp": {
"seconds": TIMESTAMP,
"microseconds": TIMESTAMP
},
"event": "SHUTDOWN",
"data": {
"guest": false,
"reason": "host-qmp-quit"
}
}
monitor: only run coroutine commands in qemu_aio_context monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedules itself in the main loop's qemu_aio_context AioContext, which is polled during nested event loops. One known problem is that QMP device-add calls drain_call_rcu(), which temporarily drops the BQL, leading to all sorts of havoc like other vCPU threads re-entering device emulation code while another vCPU thread is waiting in device emulation code with aio_poll(). Paolo Bonzini suggested running non-coroutine QMP handlers in the iohandler AioContext. This avoids trouble with nested event loops. His original idea was to move coroutine rescheduling to monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch() because we don't know if the QMP handler needs to run in coroutine context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have been nicer since it's associated with the monitor implementation and not as general as qmp_dispatch(), which is also used by qemu-ga. A number of qemu-iotests need updated .out files because the order of QMP events vs QMP responses has changed. Solves Issue #1933. Cc: qemu-stable@nongnu.org Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985 Buglink: https://issues.redhat.com/browse/RHEL-17369 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240118144823.1497953-4-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-01-18 15:48:23 +01:00
{
"return": {
}
}
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
backing file: /dev/null
backing file format: IMGFMT
*** done