qemu-e2k/hw/usb/bus.c

771 lines
20 KiB
C
Raw Normal View History

#include "qemu/osdep.h"
#include "hw/qdev-properties.h"
#include "hw/usb.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "sysemu/sysemu.h"
#include "migration/vmstate.h"
#include "monitor/monitor.h"
#include "trace.h"
#include "qemu/cutils.h"
static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent);
static char *usb_get_dev_path(DeviceState *dev);
static char *usb_get_fw_dev_path(DeviceState *qdev);
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void usb_qdev_unrealize(DeviceState *qdev);
static Property usb_props[] = {
DEFINE_PROP_STRING("port", USBDevice, port_path),
DEFINE_PROP_STRING("serial", USBDevice, serial),
DEFINE_PROP_BIT("msos-desc", USBDevice, flags,
USB_DEV_FLAG_MSOS_DESC_ENABLE, true),
DEFINE_PROP_STRING("pcap", USBDevice, pcap_filename),
DEFINE_PROP_END_OF_LIST()
};
static void usb_bus_class_init(ObjectClass *klass, void *data)
{
BusClass *k = BUS_CLASS(klass);
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
k->print_dev = usb_bus_dev_print;
k->get_dev_path = usb_get_dev_path;
k->get_fw_dev_path = usb_get_fw_dev_path;
hc->unplug = qdev_simple_device_unplug_cb;
}
static const TypeInfo usb_bus_info = {
.name = TYPE_USB_BUS,
.parent = TYPE_BUS,
.instance_size = sizeof(USBBus),
.class_init = usb_bus_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_HOTPLUG_HANDLER },
{ }
}
};
static int next_usb_bus = 0;
static QTAILQ_HEAD(, USBBus) busses = QTAILQ_HEAD_INITIALIZER(busses);
static int usb_device_post_load(void *opaque, int version_id)
{
USBDevice *dev = opaque;
if (dev->state == USB_STATE_NOTATTACHED) {
dev->attached = false;
} else {
dev->attached = true;
}
return 0;
}
const VMStateDescription vmstate_usb_device = {
.name = "USBDevice",
.version_id = 1,
.minimum_version_id = 1,
.post_load = usb_device_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT8(addr, USBDevice),
VMSTATE_INT32(state, USBDevice),
VMSTATE_INT32(remote_wakeup, USBDevice),
VMSTATE_INT32(setup_state, USBDevice),
VMSTATE_INT32(setup_len, USBDevice),
VMSTATE_INT32(setup_index, USBDevice),
VMSTATE_UINT8_ARRAY(setup_buf, USBDevice, 8),
VMSTATE_END_OF_LIST(),
}
};
void usb_bus_new(USBBus *bus, size_t bus_size,
USBBusOps *ops, DeviceState *host)
{
qbus_create_inplace(bus, bus_size, TYPE_USB_BUS, host, NULL);
qbus_set_bus_hotplug_handler(BUS(bus));
bus->ops = ops;
bus->busnr = next_usb_bus++;
QTAILQ_INIT(&bus->free);
QTAILQ_INIT(&bus->used);
QTAILQ_INSERT_TAIL(&busses, bus, next);
}
void usb_bus_release(USBBus *bus)
{
assert(next_usb_bus > 0);
QTAILQ_REMOVE(&busses, bus, next);
}
USBBus *usb_bus_find(int busnr)
{
USBBus *bus;
if (-1 == busnr)
return QTAILQ_FIRST(&busses);
QTAILQ_FOREACH(bus, &busses, next) {
if (bus->busnr == busnr)
return bus;
}
return NULL;
}
static void usb_device_realize(USBDevice *dev, Error **errp)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->realize) {
klass->realize(dev, errp);
}
}
USBDevice *usb_device_find_device(USBDevice *dev, uint8_t addr)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->find_device) {
return klass->find_device(dev, addr);
}
return NULL;
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void usb_device_unrealize(USBDevice *dev)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->unrealize) {
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
klass->unrealize(dev);
}
}
void usb_device_cancel_packet(USBDevice *dev, USBPacket *p)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->cancel_packet) {
klass->cancel_packet(dev, p);
}
}
void usb_device_handle_attach(USBDevice *dev)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->handle_attach) {
klass->handle_attach(dev);
}
}
void usb_device_handle_reset(USBDevice *dev)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->handle_reset) {
klass->handle_reset(dev);
}
}
void usb_device_handle_control(USBDevice *dev, USBPacket *p, int request,
int value, int index, int length, uint8_t *data)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->handle_control) {
klass->handle_control(dev, p, request, value, index, length, data);
}
}
void usb_device_handle_data(USBDevice *dev, USBPacket *p)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->handle_data) {
klass->handle_data(dev, p);
}
}
const char *usb_device_get_product_desc(USBDevice *dev)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
return klass->product_desc;
}
const USBDesc *usb_device_get_usb_desc(USBDevice *dev)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (dev->usb_desc) {
return dev->usb_desc;
}
return klass->usb_desc;
}
void usb_device_set_interface(USBDevice *dev, int interface,
int alt_old, int alt_new)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->set_interface) {
klass->set_interface(dev, interface, alt_old, alt_new);
}
}
void usb_device_flush_ep_queue(USBDevice *dev, USBEndpoint *ep)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->flush_ep_queue) {
klass->flush_ep_queue(dev, ep);
}
}
void usb_device_ep_stopped(USBDevice *dev, USBEndpoint *ep)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->ep_stopped) {
klass->ep_stopped(dev, ep);
}
}
int usb_device_alloc_streams(USBDevice *dev, USBEndpoint **eps, int nr_eps,
int streams)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->alloc_streams) {
return klass->alloc_streams(dev, eps, nr_eps, streams);
}
return 0;
}
void usb_device_free_streams(USBDevice *dev, USBEndpoint **eps, int nr_eps)
{
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->free_streams) {
klass->free_streams(dev, eps, nr_eps);
}
}
static void usb_qdev_realize(DeviceState *qdev, Error **errp)
{
USBDevice *dev = USB_DEVICE(qdev);
Error *local_err = NULL;
pstrcpy(dev->product_desc, sizeof(dev->product_desc),
usb_device_get_product_desc(dev));
dev->auto_attach = 1;
QLIST_INIT(&dev->strings);
usb_ep_init(dev);
usb_claim_port(dev, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
usb_device_realize(dev, &local_err);
if (local_err) {
usb_release_port(dev);
error_propagate(errp, local_err);
return;
}
if (dev->auto_attach) {
usb_device_attach(dev, &local_err);
if (local_err) {
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
usb_qdev_unrealize(qdev);
error_propagate(errp, local_err);
return;
}
}
if (dev->pcap_filename) {
int fd = qemu_open_old(dev->pcap_filename, O_CREAT | O_WRONLY | O_TRUNC, 0666);
if (fd < 0) {
error_setg(errp, "open %s failed", dev->pcap_filename);
usb_qdev_unrealize(qdev);
return;
}
dev->pcap = fdopen(fd, "w");
usb_pcap_init(dev->pcap);
}
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void usb_qdev_unrealize(DeviceState *qdev)
{
USBDevice *dev = USB_DEVICE(qdev);
USBDescString *s, *next;
QLIST_FOREACH_SAFE(s, &dev->strings, next, next) {
QLIST_REMOVE(s, next);
g_free(s->str);
g_free(s);
}
if (dev->pcap) {
fclose(dev->pcap);
}
if (dev->attached) {
usb_device_detach(dev);
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
usb_device_unrealize(dev);
if (dev->port) {
usb_release_port(dev);
}
}
typedef struct LegacyUSBFactory
{
const char *name;
const char *usbdevice_name;
USBDevice *(*usbdevice_init)(void);
} LegacyUSBFactory;
static GSList *legacy_usb_factory;
void usb_legacy_register(const char *typename, const char *usbdevice_name,
USBDevice *(*usbdevice_init)(void))
{
if (usbdevice_name) {
LegacyUSBFactory *f = g_malloc0(sizeof(*f));
f->name = typename;
f->usbdevice_name = usbdevice_name;
f->usbdevice_init = usbdevice_init;
legacy_usb_factory = g_slist_append(legacy_usb_factory, f);
}
}
USBDevice *usb_new(const char *name)
{
return USB_DEVICE(qdev_new(name));
}
static USBDevice *usb_try_new(const char *name)
{
return USB_DEVICE(qdev_try_new(name));
}
bool usb_realize_and_unref(USBDevice *dev, USBBus *bus, Error **errp)
{
return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp);
}
usb: Suppress bogus error when automatic usb-hub creation fails USBDevice's realize method usb_qdev_realize() automatically creates a usb-hub when only one port is left. Creating devices in realize methods is questionable, but works. If usb-hub creation fails, an error is reported to stderr, but the failure is otherwise ignored. We then create the actual device using the last port, which may well succeed. Example: $ qemu -nodefaults -S -display none -machine usb=on -monitor stdio QEMU 2.2.50 monitor - type 'help' for more information (qemu) device_add usb-mouse [Repeat 36 times] (qemu) info usb Device 0.0, Port 1, Speed 12 Mb/s, Product QEMU USB Mouse Device 0.0, Port 2, Speed 12 Mb/s, Product QEMU USB Hub Device 0.0, Port 2.1, Speed 12 Mb/s, Product QEMU USB Mouse [More mice and hubs omitted...] Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse (qemu) device_add usb-mouse usb hub chain too deep Failed to initialize USB device 'usb-hub' (qemu) info usb [...] Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse Device 0.0, Port 2.8.8.8.8.8, Speed 12 Mb/s, Product QEMU USB Mouse Despite the "Failed" message, the command actually succeeded. In QMP, it's worse. When adding the 37th mouse via QMP, the command fails with {"error": {"class": "GenericError", "desc": "usb hub chain too deep"}} Additionally, "Failed to initialize USB device 'usb-hub'" is reported on stderr. Despite the command failure, the device was created. This is wrong. Fix by avoiding qdev_init() for usb-hub creation, so we can ignore errors cleanly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-04 13:28:11 +01:00
USBDevice *usb_create_simple(USBBus *bus, const char *name)
{
USBDevice *dev = usb_new(name);
usb_realize_and_unref(dev, bus, &error_abort);
return dev;
usb: Suppress bogus error when automatic usb-hub creation fails USBDevice's realize method usb_qdev_realize() automatically creates a usb-hub when only one port is left. Creating devices in realize methods is questionable, but works. If usb-hub creation fails, an error is reported to stderr, but the failure is otherwise ignored. We then create the actual device using the last port, which may well succeed. Example: $ qemu -nodefaults -S -display none -machine usb=on -monitor stdio QEMU 2.2.50 monitor - type 'help' for more information (qemu) device_add usb-mouse [Repeat 36 times] (qemu) info usb Device 0.0, Port 1, Speed 12 Mb/s, Product QEMU USB Mouse Device 0.0, Port 2, Speed 12 Mb/s, Product QEMU USB Hub Device 0.0, Port 2.1, Speed 12 Mb/s, Product QEMU USB Mouse [More mice and hubs omitted...] Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse (qemu) device_add usb-mouse usb hub chain too deep Failed to initialize USB device 'usb-hub' (qemu) info usb [...] Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse Device 0.0, Port 2.8.8.8.8.8, Speed 12 Mb/s, Product QEMU USB Mouse Despite the "Failed" message, the command actually succeeded. In QMP, it's worse. When adding the 37th mouse via QMP, the command fails with {"error": {"class": "GenericError", "desc": "usb hub chain too deep"}} Additionally, "Failed to initialize USB device 'usb-hub'" is reported on stderr. Despite the command failure, the device was created. This is wrong. Fix by avoiding qdev_init() for usb-hub creation, so we can ignore errors cleanly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-04 13:28:11 +01:00
}
static void usb_fill_port(USBPort *port, void *opaque, int index,
USBPortOps *ops, int speedmask)
{
port->opaque = opaque;
port->index = index;
port->ops = ops;
port->speedmask = speedmask;
usb_port_location(port, NULL, index + 1);
}
void usb_register_port(USBBus *bus, USBPort *port, void *opaque, int index,
USBPortOps *ops, int speedmask)
{
usb_fill_port(port, opaque, index, ops, speedmask);
QTAILQ_INSERT_TAIL(&bus->free, port, next);
bus->nfree++;
}
void usb_register_companion(const char *masterbus, USBPort *ports[],
uint32_t portcount, uint32_t firstport,
void *opaque, USBPortOps *ops, int speedmask,
Error **errp)
{
USBBus *bus;
int i;
QTAILQ_FOREACH(bus, &busses, next) {
if (strcmp(bus->qbus.name, masterbus) == 0) {
break;
}
}
if (!bus) {
error_setg(errp, "USB bus '%s' not found", masterbus);
return;
}
if (!bus->ops->register_companion) {
error_setg(errp, "Can't use USB bus '%s' as masterbus,"
" it doesn't support companion controllers",
masterbus);
return;
}
for (i = 0; i < portcount; i++) {
usb_fill_port(ports[i], opaque, i, ops, speedmask);
}
bus->ops->register_companion(bus, ports, portcount, firstport, errp);
}
void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr)
{
if (upstream) {
int l = snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
upstream->path, portnr);
/* Max string is nn.nn.nn.nn.nn, which fits in 16 bytes */
assert(l < sizeof(downstream->path));
downstream->hubcount = upstream->hubcount + 1;
} else {
snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
downstream->hubcount = 0;
}
}
void usb_unregister_port(USBBus *bus, USBPort *port)
{
if (port->dev) {
object_unparent(OBJECT(port->dev));
}
QTAILQ_REMOVE(&bus->free, port, next);
bus->nfree--;
}
void usb_claim_port(USBDevice *dev, Error **errp)
{
USBBus *bus = usb_bus_from_device(dev);
USBPort *port;
USBDevice *hub;
assert(dev->port == NULL);
if (dev->port_path) {
QTAILQ_FOREACH(port, &bus->free, next) {
if (strcmp(port->path, dev->port_path) == 0) {
break;
}
}
if (port == NULL) {
error_setg(errp, "usb port %s (bus %s) not found (in use?)",
dev->port_path, bus->qbus.name);
return;
}
} else {
if (bus->nfree == 1 && strcmp(object_get_typename(OBJECT(dev)), "usb-hub") != 0) {
/* Create a new hub and chain it on */
hub = usb_try_new("usb-hub");
if (hub) {
usb_realize_and_unref(hub, bus, NULL);
}
}
if (bus->nfree == 0) {
error_setg(errp, "tried to attach usb device %s to a bus "
"with no free ports", dev->product_desc);
return;
}
port = QTAILQ_FIRST(&bus->free);
}
trace_usb_port_claim(bus->busnr, port->path);
QTAILQ_REMOVE(&bus->free, port, next);
bus->nfree--;
dev->port = port;
port->dev = dev;
QTAILQ_INSERT_TAIL(&bus->used, port, next);
bus->nused++;
}
void usb_release_port(USBDevice *dev)
{
USBBus *bus = usb_bus_from_device(dev);
USBPort *port = dev->port;
assert(port != NULL);
trace_usb_port_release(bus->busnr, port->path);
QTAILQ_REMOVE(&bus->used, port, next);
bus->nused--;
dev->port = NULL;
port->dev = NULL;
QTAILQ_INSERT_TAIL(&bus->free, port, next);
bus->nfree++;
}
static void usb_mask_to_str(char *dest, size_t size,
unsigned int speedmask)
{
static const struct {
unsigned int mask;
const char *name;
} speeds[] = {
{ .mask = USB_SPEED_MASK_FULL, .name = "full" },
{ .mask = USB_SPEED_MASK_HIGH, .name = "high" },
{ .mask = USB_SPEED_MASK_SUPER, .name = "super" },
};
int i, pos = 0;
for (i = 0; i < ARRAY_SIZE(speeds); i++) {
if (speeds[i].mask & speedmask) {
pos += snprintf(dest + pos, size - pos, "%s%s",
pos ? "+" : "",
speeds[i].name);
}
}
if (pos == 0) {
snprintf(dest, size, "unknown");
}
}
void usb_check_attach(USBDevice *dev, Error **errp)
{
USBBus *bus = usb_bus_from_device(dev);
USBPort *port = dev->port;
char devspeed[32], portspeed[32];
assert(port != NULL);
assert(!dev->attached);
usb_mask_to_str(devspeed, sizeof(devspeed), dev->speedmask);
usb_mask_to_str(portspeed, sizeof(portspeed), port->speedmask);
trace_usb_port_attach(bus->busnr, port->path,
devspeed, portspeed);
if (!(port->speedmask & dev->speedmask)) {
error_setg(errp, "Warning: speed mismatch trying to attach"
" usb device \"%s\" (%s speed)"
" to bus \"%s\", port \"%s\" (%s speed)",
dev->product_desc, devspeed,
bus->qbus.name, port->path, portspeed);
return;
}
}
void usb_device_attach(USBDevice *dev, Error **errp)
{
USBPort *port = dev->port;
Error *local_err = NULL;
usb_check_attach(dev, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
dev->attached = true;
usb_attach(port);
}
int usb_device_detach(USBDevice *dev)
{
USBBus *bus = usb_bus_from_device(dev);
USBPort *port = dev->port;
assert(port != NULL);
assert(dev->attached);
trace_usb_port_detach(bus->busnr, port->path);
usb_detach(port);
dev->attached = false;
return 0;
}
static const char *usb_speed(unsigned int speed)
{
static const char *txt[] = {
[ USB_SPEED_LOW ] = "1.5",
[ USB_SPEED_FULL ] = "12",
[ USB_SPEED_HIGH ] = "480",
[ USB_SPEED_SUPER ] = "5000",
};
if (speed >= ARRAY_SIZE(txt))
return "?";
return txt[speed];
}
static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)
{
USBDevice *dev = USB_DEVICE(qdev);
USBBus *bus = usb_bus_from_device(dev);
monitor_printf(mon, "%*saddr %d.%d, port %s, speed %s, name %s%s\n",
indent, "", bus->busnr, dev->addr,
dev->port ? dev->port->path : "-",
usb_speed(dev->speed), dev->product_desc,
dev->attached ? ", attached" : "");
}
static char *usb_get_dev_path(DeviceState *qdev)
{
USBDevice *dev = USB_DEVICE(qdev);
DeviceState *hcd = qdev->parent_bus->parent;
char *id = qdev_get_dev_path(hcd);
if (id) {
char *ret = g_strdup_printf("%s/%s", id, dev->port->path);
g_free(id);
return ret;
} else {
return g_strdup(dev->port->path);
}
}
static char *usb_get_fw_dev_path(DeviceState *qdev)
{
USBDevice *dev = USB_DEVICE(qdev);
char *fw_path, *in;
ssize_t pos = 0, fw_len;
long nr;
fw_len = 32 + strlen(dev->port->path) * 6;
fw_path = g_malloc(fw_len);
in = dev->port->path;
while (fw_len - pos > 0) {
nr = strtol(in, &in, 10);
if (in[0] == '.') {
/* some hub between root port and device */
pos += snprintf(fw_path + pos, fw_len - pos, "hub@%lx/", nr);
in++;
} else {
/* the device itself */
snprintf(fw_path + pos, fw_len - pos, "%s@%lx",
qdev_fw_name(qdev), nr);
break;
}
}
return fw_path;
}
void hmp_info_usb(Monitor *mon, const QDict *qdict)
{
USBBus *bus;
USBDevice *dev;
USBPort *port;
if (QTAILQ_EMPTY(&busses)) {
monitor_printf(mon, "USB support not enabled\n");
return;
}
QTAILQ_FOREACH(bus, &busses, next) {
QTAILQ_FOREACH(port, &bus->used, next) {
dev = port->dev;
if (!dev)
continue;
monitor_printf(mon, " Device %d.%d, Port %s, Speed %s Mb/s, "
"Product %s%s%s\n",
bus->busnr, dev->addr, port->path,
usb_speed(dev->speed), dev->product_desc,
dev->qdev.id ? ", ID: " : "",
dev->qdev.id ?: "");
}
}
}
/* handle legacy -usbdevice cmd line option */
USBDevice *usbdevice_create(const char *driver)
{
USBBus *bus = usb_bus_find(-1 /* any */);
LegacyUSBFactory *f = NULL;
Error *err = NULL;
GSList *i;
USBDevice *dev;
if (strchr(driver, ':')) {
error_report("usbdevice parameters are not supported anymore");
return NULL;
}
for (i = legacy_usb_factory; i; i = i->next) {
f = i->data;
if (strcmp(f->usbdevice_name, driver) == 0) {
break;
}
}
if (i == NULL) {
#if 0
/* no error because some drivers are not converted (yet) */
error_report("usbdevice %s not found", driver);
#endif
return NULL;
}
if (!bus) {
error_report("Error: no usb bus to attach usbdevice %s, "
"please try -machine usb=on and check that "
"the machine model supports USB", driver);
return NULL;
}
dev = f->usbdevice_init ? f->usbdevice_init() : usb_new(f->name);
if (!dev) {
error_report("Failed to create USB device '%s'", f->name);
return NULL;
}
if (!usb_realize_and_unref(dev, bus, &err)) {
error_reportf_err(err, "Failed to initialize USB device '%s': ",
f->name);
object_unparent(OBJECT(dev));
return NULL;
}
return dev;
}
static bool usb_get_attached(Object *obj, Error **errp)
{
USBDevice *dev = USB_DEVICE(obj);
return dev->attached;
}
static void usb_set_attached(Object *obj, bool value, Error **errp)
{
USBDevice *dev = USB_DEVICE(obj);
if (dev->attached == value) {
return;
}
if (value) {
usb_device_attach(dev, errp);
} else {
usb_device_detach(dev);
}
}
static void usb_device_instance_init(Object *obj)
{
USBDevice *dev = USB_DEVICE(obj);
USBDeviceClass *klass = USB_DEVICE_GET_CLASS(dev);
if (klass->attached_settable) {
object_property_add_bool(obj, "attached",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
usb_get_attached, usb_set_attached);
} else {
object_property_add_bool(obj, "attached",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
usb_get_attached, NULL);
}
}
static void usb_device_class_init(ObjectClass *klass, void *data)
{
DeviceClass *k = DEVICE_CLASS(klass);
k->bus_type = TYPE_USB_BUS;
k->realize = usb_qdev_realize;
k->unrealize = usb_qdev_unrealize;
device_class_set_props(k, usb_props);
}
static const TypeInfo usb_device_type_info = {
.name = TYPE_USB_DEVICE,
.parent = TYPE_DEVICE,
.instance_size = sizeof(USBDevice),
.instance_init = usb_device_instance_init,
.abstract = true,
.class_size = sizeof(USBDeviceClass),
.class_init = usb_device_class_init,
};
static void usb_register_types(void)
{
type_register_static(&usb_bus_info);
type_register_static(&usb_device_type_info);
}
type_init(usb_register_types)