qemu-e2k/hw/i386/pc_piix.c

1029 lines
34 KiB
C
Raw Normal View History

/*
* QEMU PC System Emulator
*
* Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "config-devices.h"
#include "qemu/units.h"
#include "hw/loader.h"
#include "hw/i386/x86.h"
#include "hw/i386/pc.h"
#include "hw/i386/apic.h"
#include "hw/pci-host/i440fx.h"
#include "hw/southbridge/piix.h"
#include "hw/display/ramfb.h"
#include "hw/firmware/smbios.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_ids.h"
#include "hw/usb.h"
#include "net/net.h"
#include "hw/ide.h"
#include "hw/irq.h"
#include "sysemu/kvm.h"
#include "hw/kvm/clock.h"
#include "sysemu/sysemu.h"
#include "hw/sysbus.h"
#include "sysemu/arch_init.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/xen/xen.h"
#include "exec/memory.h"
#include "exec/address-spaces.h"
#include "hw/acpi/acpi.h"
#include "cpu.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#ifdef CONFIG_XEN
#include <xen/hvm/hvm_info_table.h>
#include "hw/xen/xen_pt.h"
#endif
#include "migration/global_state.h"
#include "migration/misc.h"
numa: equally distribute memory on nodes When there are more nodes than available memory to put the minimum allowed memory by node, all the memory is put on the last node. This is because we put (ram_size / nb_numa_nodes) & ~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this case the value is 0. This is particularly true with pseries, as the memory must be aligned to 256MB. To avoid this problem, this patch uses an error diffusion algorithm [1] to distribute equally the memory on nodes. We introduce numa_auto_assign_ram() function in MachineClass to keep compatibility between machine type versions. The legacy function is used with pseries-2.9, pc-q35-2.9 and pc-i440fx-2.9 (and previous), the new one with all others. Example: qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \ -numa node -numa node -numa node \ -numa node -numa node -numa node Before: (qemu) info numa 6 nodes node 0 cpus: 0 6 node 0 size: 0 MB node 1 cpus: 1 7 node 1 size: 0 MB node 2 cpus: 2 node 2 size: 0 MB node 3 cpus: 3 node 3 size: 0 MB node 4 cpus: 4 node 4 size: 0 MB node 5 cpus: 5 node 5 size: 1024 MB After: (qemu) info numa 6 nodes node 0 cpus: 0 6 node 0 size: 0 MB node 1 cpus: 1 7 node 1 size: 256 MB node 2 cpus: 2 node 2 size: 0 MB node 3 cpus: 3 node 3 size: 256 MB node 4 cpus: 4 node 4 size: 256 MB node 5 cpus: 5 node 5 size: 256 MB [1] https://en.wikipedia.org/wiki/Error_diffusion Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170502162955.1610-2-lvivier@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-02 18:29:55 +02:00
#include "sysemu/numa.h"
#define MAX_IDE_BUS 2
#ifdef CONFIG_IDE_ISA
static const int ide_iobase[MAX_IDE_BUS] = { 0x1f0, 0x170 };
static const int ide_iobase2[MAX_IDE_BUS] = { 0x3f6, 0x376 };
static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
#endif
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
ram_addr_t lowmem;
/*
* Calculate ram split, for memory below and above 4G. It's a bit
* complicated for backward compatibility reasons ...
*
* - Traditional split is 3.5G (lowmem = 0xe0000000). This is the
* default value for max_ram_below_4g now.
*
* - Then, to gigabyte align the memory, we move the split to 3G
* (lowmem = 0xc0000000). But only in case we have to split in
* the first place, i.e. ram_size is larger than (traditional)
* lowmem. And for new machine types (gigabyte_align = true)
* only, for live migration compatibility reasons.
*
* - Next the max-ram-below-4g option was added, which allowed to
* reduce lowmem to a smaller value, to allow a larger PCI I/O
* window below 4G. qemu doesn't enforce gigabyte alignment here,
* but prints a warning.
*
* - Finally max-ram-below-4g got updated to also allow raising lowmem,
* so legacy non-PAE guests can get as much memory as possible in
* the 32bit address space below 4G.
*
* - Note that Xen has its own ram setp code in xen_ram_init(),
* called via xen_hvm_init().
*
* Examples:
* qemu -M pc-1.7 -m 4G (old default) -> 3584M low, 512M high
* qemu -M pc -m 4G (new default) -> 3072M low, 1024M high
* qemu -M pc,max-ram-below-4g=2G -m 4G -> 2048M low, 2048M high
* qemu -M pc,max-ram-below-4g=4G -m 3968M -> 3968M low (=4G-128M)
*/
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
} else {
if (!x86ms->max_ram_below_4g) {
x86ms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
}
lowmem = x86ms->max_ram_below_4g;
if (machine->ram_size >= x86ms->max_ram_below_4g) {
if (pcmc->gigabyte_align) {
if (lowmem > 0xc0000000) {
lowmem = 0xc0000000;
}
if (lowmem & (1 * GiB - 1)) {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 15:57:41 +02:00
warn_report("Large machine and max_ram_below_4g "
"(%" PRIu64 ") not a multiple of 1G; "
"possible bad performance.",
x86ms->max_ram_below_4g);
}
}
}
if (machine->ram_size >= lowmem) {
x86ms->above_4g_mem_size = machine->ram_size - lowmem;
x86ms->below_4g_mem_size = lowmem;
} else {
x86ms->above_4g_mem_size = 0;
x86ms->below_4g_mem_size = machine->ram_size;
}
}
x86_cpus_init(x86ms, pcmc->default_cpu_version);
if (kvm_enabled() && pcmc->kvmclock_enabled) {
kvmclock_create();
}
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms);
}
gsi_state = pc_gsi_create(&x86ms->gsi, pcmc->pci_enabled);
if (pcmc->pci_enabled) {
PIIX3State *piix3;
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state,
system_memory, system_io, machine->ram_size,
x86ms->below_4g_mem_size,
x86ms->above_4g_mem_size,
pci_memory, ram_memory);
pcms->bus = pci_bus;
piix3 = piix3_create(pci_bus, &isa_bus);
piix3->pic = x86ms->gsi;
piix3_devfn = piix3->dev.devfn;
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa: Clean up error handling around isa_bus_new() We can have at most one ISA bus. If you try to create another one, isa_bus_new() complains to stderr and returns null. isa_bus_new() is called in two contexts, machine's init() and device's realize() methods. Since complaining to stderr is not proper in the latter context, convert isa_bus_new() to Error. Machine's init(): * mips_jazz_init(), called from the init() methods of machines "magnum" and "pica" * mips_r4k_init(), the init() method of machine "mips" * pc_init1() called from the init() methods of non-q35 PC machines * typhoon_init(), called from clipper_init(), the init() method of machine "clipper" These callers always create the first ISA bus, hence isa_bus_new() can't fail. Simply pass &error_abort. Device's realize(): * i82378_realize(), of PCI device "i82378" * ich9_lpc_realize(), of PCI device "ICH9-LPC" * pci_ebus_realize(), of PCI device "ebus" * piix3_realize(), of PCI device "pci-piix3", abstract parent of "PIIX3" and "PIIX3-xen" * piix4_realize(), of PCI device "PIIX4" * vt82c686b_realize(), of PCI device "VT82C686B" Propagate the error. Note that these devices are typically created only by machine init() methods with qdev_init_nofail() or similar. If we screwed up and created an ISA bus before that call, we now give up right away. Before, we'd hobble on, and typically die in isa_bus_irqs(). Similar if someone finds a way to hot-plug one of these critters. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2015-12-17 17:35:18 +01:00
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io,
&error_abort);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, x86ms->gsi);
pc_i8259_create(isa_bus, gsi_state->i8259_irq);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
if (tcg_enabled()) {
x86_register_ferr_irq(x86ms->gsi[13]);
}
pc_vga_init(isa_bus, pcmc->pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, x86ms->gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), pcms->pit_enabled,
0x4);
pc_nic_init(pcmc, isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pcmc->pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
}
#ifdef CONFIG_IDE_ISA
else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
qdev: Keep global allocation counter per bus When we have 2 separate qdev devices that both create a qbus of the same type without specifying a bus name or device name, we end up with two buses of the same name, such as ide.0 on the Mac machines: dev: macio-ide, id "" bus: ide.0 type IDE dev: macio-ide, id "" bus: ide.0 type IDE If we now spawn a device that connects to a ide.0 the last created bus gets the device, with the first created bus inaccessible to the command line. After some discussion on IRC we concluded that the best quick fix way forward for this is to make automated bus-class type based allocation count a global counter. That's what this patch implements. With this we instead get dev: macio-ide, id "" bus: ide.1 type IDE dev: macio-ide, id "" bus: ide.0 type IDE on the example mentioned above. This also means that if you did -device ...,bus=ide.0 you got a device on the first bus (the last created one) before this patch and get that device on the second one (the first created one) now. Breaks migration unless you change bus=ide.0 to bus=ide.1 on the destination. This is intended and makes the bus enumeration work as expected. As per review request follows a list of otherwise affected boards and the reasoning for the conclusion that they are ok: target machine bus id times ------ ------- ------ ----- aarch64 n800 i2c-bus.0 2 aarch64 n810 i2c-bus.0 2 arm n800 i2c-bus.0 2 arm n810 i2c-bus.0 2 -> Devices are only created explicitly on one of the two buses, using s->mpu->i2c[0], so no change to the guest. aarch64 vexpress-a15 virtio-mmio-bus.0 4 aarch64 vexpress-a9 virtio-mmio-bus.0 4 aarch64 virt virtio-mmio-bus.0 32 arm vexpress-a15 virtio-mmio-bus.0 4 arm vexpress-a9 virtio-mmio-bus.0 4 arm virt virtio-mmio-bus.0 32 -> Makes -device bus= work for all virtio-mmio buses. Breaks migration. Workaround for migration from old to new: specify virtio-mmio-bus.4 or .32 respectively rather than .0 on the destination. aarch64 xilinx-zynq-a9 usb-bus.0 2 arm xilinx-zynq-a9 usb-bus.0 2 mips64el fulong2e usb-bus.0 2 -> Normal USB operation not affected. Migration driver needs command line to use the other bus. i386 isapc ide.0 2 x86_64 isapc ide.0 2 mips mips ide.0 2 mips64 mips ide.0 2 mips64el mips ide.0 2 mipsel mips ide.0 2 ppc g3beige ide.0 2 ppc mac99 ide.0 2 ppc prep ide.0 2 ppc64 g3beige ide.0 2 ppc64 mac99 ide.0 2 ppc64 prep ide.0 2 -> Makes -device bus= work for all IDE buses. Breaks migration. Workaround for migration from old to new: specify ide.1 rather than ide.0 on the destination. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-02-06 16:08:15 +01:00
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
qdev: Keep global allocation counter per bus When we have 2 separate qdev devices that both create a qbus of the same type without specifying a bus name or device name, we end up with two buses of the same name, such as ide.0 on the Mac machines: dev: macio-ide, id "" bus: ide.0 type IDE dev: macio-ide, id "" bus: ide.0 type IDE If we now spawn a device that connects to a ide.0 the last created bus gets the device, with the first created bus inaccessible to the command line. After some discussion on IRC we concluded that the best quick fix way forward for this is to make automated bus-class type based allocation count a global counter. That's what this patch implements. With this we instead get dev: macio-ide, id "" bus: ide.1 type IDE dev: macio-ide, id "" bus: ide.0 type IDE on the example mentioned above. This also means that if you did -device ...,bus=ide.0 you got a device on the first bus (the last created one) before this patch and get that device on the second one (the first created one) now. Breaks migration unless you change bus=ide.0 to bus=ide.1 on the destination. This is intended and makes the bus enumeration work as expected. As per review request follows a list of otherwise affected boards and the reasoning for the conclusion that they are ok: target machine bus id times ------ ------- ------ ----- aarch64 n800 i2c-bus.0 2 aarch64 n810 i2c-bus.0 2 arm n800 i2c-bus.0 2 arm n810 i2c-bus.0 2 -> Devices are only created explicitly on one of the two buses, using s->mpu->i2c[0], so no change to the guest. aarch64 vexpress-a15 virtio-mmio-bus.0 4 aarch64 vexpress-a9 virtio-mmio-bus.0 4 aarch64 virt virtio-mmio-bus.0 32 arm vexpress-a15 virtio-mmio-bus.0 4 arm vexpress-a9 virtio-mmio-bus.0 4 arm virt virtio-mmio-bus.0 32 -> Makes -device bus= work for all virtio-mmio buses. Breaks migration. Workaround for migration from old to new: specify virtio-mmio-bus.4 or .32 respectively rather than .0 on the destination. aarch64 xilinx-zynq-a9 usb-bus.0 2 arm xilinx-zynq-a9 usb-bus.0 2 mips64el fulong2e usb-bus.0 2 -> Normal USB operation not affected. Migration driver needs command line to use the other bus. i386 isapc ide.0 2 x86_64 isapc ide.0 2 mips mips ide.0 2 mips64 mips ide.0 2 mips64el mips ide.0 2 mipsel mips ide.0 2 ppc g3beige ide.0 2 ppc mac99 ide.0 2 ppc prep ide.0 2 ppc64 g3beige ide.0 2 ppc64 mac99 ide.0 2 ppc64 prep ide.0 2 -> Makes -device bus= work for all IDE buses. Breaks migration. Workaround for migration from old to new: specify ide.1 rather than ide.0 on the destination. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-02-06 16:08:15 +01:00
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
}
#endif
if (pcmc->pci_enabled && machine_usb(machine)) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pcmc->pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
pcms->smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
x86ms->gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(pcms->smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_STRONG, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (machine->nvdimms_state->is_enabled) {
nvdimm_init_acpi_state(machine->nvdimms_state, system_io,
x86ms->fw_cfg, OBJECT(pcms));
}
}
/* Looking for a pc_compat_2_4() function? It doesn't exist.
* pc_compat_*() functions that run on machine-init time and
* change global QEMU state are deprecated. Please don't create
* one, and implement any pc-*-2.4 (and newer) compat code in
* hw_compat_*, pc_compat_*, or * pc_*_machine_options().
*/
static void pc_compat_2_3_fn(MachineState *machine)
{
PCMachineState *pcms = PC_MACHINE(machine);
if (kvm_enabled()) {
pcms->smm = ON_OFF_AUTO_OFF;
}
}
static void pc_compat_2_2_fn(MachineState *machine)
{
pc_compat_2_3_fn(machine);
}
static void pc_compat_2_1_fn(MachineState *machine)
{
pc_compat_2_2_fn(machine);
x86_cpu_change_kvm_default("svm", NULL);
}
static void pc_compat_2_0_fn(MachineState *machine)
{
pc_compat_2_1_fn(machine);
}
static void pc_compat_1_7_fn(MachineState *machine)
{
pc_compat_2_0_fn(machine);
x86_cpu_change_kvm_default("x2apic", NULL);
}
static void pc_compat_1_6_fn(MachineState *machine)
{
pc_compat_1_7_fn(machine);
}
static void pc_compat_1_5_fn(MachineState *machine)
{
pc_compat_1_6_fn(machine);
}
static void pc_compat_1_4_fn(MachineState *machine)
pc: Kill the "use flash device for BIOS unless KVM" misfeature Use of a flash memory device for the BIOS was added in series "[PATCH v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1. Flash vs. ROM is a guest-visible difference. Thus, flash use had to be suppressed for machine types pc-1.0 and older. This was accomplished by adding a dummy device "pc-sysfw" with property "rom_only": * Non-zero rom_only means "use ROM". Default for pc-1.0 and older. * Zero rom_only means "maybe use flash". Default for newer machines. Not only is the dummy device ugly, it was also retroactively added to the older machine types! Fortunately, it's not guest-visible (thus no immediate guest ABI breakage), and has no vmstate (thus no immediate migration breakage). Breakage occurs only if the user unwisely enables flash by setting rom_only to zero. Patch review FAIL #1. Why "maybe use flash"? Flash didn't (and still doesn't) work with KVM. Therefore, rom_only=0 really means "use flash, except when KVM is enabled, use ROM". This is a Bad Idea, because it makes enabling/ disabling KVM guest-visible. Patch review FAIL #2. Aside: it also precludes migrating between KVM on and off, but that's not possible for other reasons anyway. Fix as follows: 1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts, or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything for older machines (to remain bug-compatible). 2. Change the default value from 0 to 1 for these machines. Necessary, because 0 doesn't work with KVM. Once it does, we can flip the default back to 0. 3. Don't revert the retroactive addition of device "pc-sysfw" to older machine types. Seems not worth the trouble. 4. Add a TODO comment asking for device "pc-sysfw" to be dropped once flash works with KVM. Net effect is that you get a BIOS ROM again even when KVM is disabled, just like for machines predating the introduction of flash. To get flash instead, use "--global pc-sysfw.rom_only=0". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-12 17:25:03 +02:00
{
pc_compat_1_5_fn(machine);
pc: Kill the "use flash device for BIOS unless KVM" misfeature Use of a flash memory device for the BIOS was added in series "[PATCH v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1. Flash vs. ROM is a guest-visible difference. Thus, flash use had to be suppressed for machine types pc-1.0 and older. This was accomplished by adding a dummy device "pc-sysfw" with property "rom_only": * Non-zero rom_only means "use ROM". Default for pc-1.0 and older. * Zero rom_only means "maybe use flash". Default for newer machines. Not only is the dummy device ugly, it was also retroactively added to the older machine types! Fortunately, it's not guest-visible (thus no immediate guest ABI breakage), and has no vmstate (thus no immediate migration breakage). Breakage occurs only if the user unwisely enables flash by setting rom_only to zero. Patch review FAIL #1. Why "maybe use flash"? Flash didn't (and still doesn't) work with KVM. Therefore, rom_only=0 really means "use flash, except when KVM is enabled, use ROM". This is a Bad Idea, because it makes enabling/ disabling KVM guest-visible. Patch review FAIL #2. Aside: it also precludes migrating between KVM on and off, but that's not possible for other reasons anyway. Fix as follows: 1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts, or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything for older machines (to remain bug-compatible). 2. Change the default value from 0 to 1 for these machines. Necessary, because 0 doesn't work with KVM. Once it does, we can flip the default back to 0. 3. Don't revert the retroactive addition of device "pc-sysfw" to older machine types. Seems not worth the trouble. 4. Add a TODO comment asking for device "pc-sysfw" to be dropped once flash works with KVM. Net effect is that you get a BIOS ROM again even when KVM is disabled, just like for machines predating the introduction of flash. To get flash instead, use "--global pc-sysfw.rom_only=0". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-12 17:25:03 +02:00
}
static void pc_compat_1_3(MachineState *machine)
{
pc_compat_1_4_fn(machine);
}
/* PC compat function for pc-0.14 to pc-1.2 */
static void pc_compat_1_2(MachineState *machine)
{
pc_compat_1_3(machine);
x86_cpu_change_kvm_default("kvm-pv-eoi", NULL);
}
/* PC compat function for pc-0.12 and pc-0.13 */
static void pc_compat_0_13(MachineState *machine)
{
pc_compat_1_2(machine);
}
static void pc_init_isa(MachineState *machine)
{
pc_init1(machine, TYPE_I440FX_PCI_HOST_BRIDGE, TYPE_I440FX_PCI_DEVICE);
}
#ifdef CONFIG_XEN
static void pc_xen_hvm_init_pci(MachineState *machine)
{
const char *pci_type = has_igd_gfx_passthru ?
TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE : TYPE_I440FX_PCI_DEVICE;
pc_init1(machine,
TYPE_I440FX_PCI_HOST_BRIDGE,
pci_type);
}
static void pc_xen_hvm_init(MachineState *machine)
{
PCMachineState *pcms = PC_MACHINE(machine);
if (!xen_enabled()) {
error_report("xenfv machine requires the xen accelerator");
exit(1);
}
pc_xen_hvm_init_pci(machine);
pci_create_simple(pcms->bus, -1, "xen-platform");
}
#endif
#define DEFINE_I440FX_MACHINE(suffix, name, compatfn, optionfn) \
static void pc_init_##suffix(MachineState *machine) \
{ \
void (*compat)(MachineState *m) = (compatfn); \
if (compat) { \
compat(machine); \
} \
pc_init1(machine, TYPE_I440FX_PCI_HOST_BRIDGE, \
TYPE_I440FX_PCI_DEVICE); \
} \
DEFINE_PC_MACHINE(suffix, name, pc_init_##suffix, optionfn)
static void pc_i440fx_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pcmc->default_nic_model = "e1000";
m->family = "pc_piix";
m->desc = "Standard PC (i440FX + PIIX, 1996)";
m->default_machine_opts = "firmware=bios-256k.bin";
m->default_display = "std";
machine_class_allow_dynamic_sysbus_dev(m, TYPE_RAMFB_DEVICE);
}
static void pc_i440fx_4_2_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_machine_options(m);
m->alias = "pc";
m->is_default = 1;
pcmc->default_cpu_version = 1;
}
DEFINE_I440FX_MACHINE(v4_2, "pc-i440fx-4.2", NULL,
pc_i440fx_4_2_machine_options);
static void pc_i440fx_4_1_machine_options(MachineClass *m)
{
pc_i440fx_4_2_machine_options(m);
m->alias = NULL;
m->is_default = 0;
compat_props_add(m->compat_props, hw_compat_4_1, hw_compat_4_1_len);
compat_props_add(m->compat_props, pc_compat_4_1, pc_compat_4_1_len);
}
DEFINE_I440FX_MACHINE(v4_1, "pc-i440fx-4.1", NULL,
pc_i440fx_4_1_machine_options);
static void pc_i440fx_4_0_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_4_1_machine_options(m);
m->alias = NULL;
m->is_default = 0;
pcmc->default_cpu_version = CPU_VERSION_LEGACY;
compat_props_add(m->compat_props, hw_compat_4_0, hw_compat_4_0_len);
compat_props_add(m->compat_props, pc_compat_4_0, pc_compat_4_0_len);
}
DEFINE_I440FX_MACHINE(v4_0, "pc-i440fx-4.0", NULL,
pc_i440fx_4_0_machine_options);
static void pc_i440fx_3_1_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_4_0_machine_options(m);
m->is_default = 0;
pcmc->do_not_add_smb_acpi = true;
m->smbus_no_migration_support = true;
m->alias = NULL;
pcmc->pvh_enabled = false;
compat_props_add(m->compat_props, hw_compat_3_1, hw_compat_3_1_len);
compat_props_add(m->compat_props, pc_compat_3_1, pc_compat_3_1_len);
}
DEFINE_I440FX_MACHINE(v3_1, "pc-i440fx-3.1", NULL,
pc_i440fx_3_1_machine_options);
static void pc_i440fx_3_0_machine_options(MachineClass *m)
{
pc_i440fx_3_1_machine_options(m);
compat_props_add(m->compat_props, hw_compat_3_0, hw_compat_3_0_len);
compat_props_add(m->compat_props, pc_compat_3_0, pc_compat_3_0_len);
}
DEFINE_I440FX_MACHINE(v3_0, "pc-i440fx-3.0", NULL,
pc_i440fx_3_0_machine_options);
static void pc_i440fx_2_12_machine_options(MachineClass *m)
{
pc_i440fx_3_0_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_12, hw_compat_2_12_len);
compat_props_add(m->compat_props, pc_compat_2_12, pc_compat_2_12_len);
}
DEFINE_I440FX_MACHINE(v2_12, "pc-i440fx-2.12", NULL,
pc_i440fx_2_12_machine_options);
static void pc_i440fx_2_11_machine_options(MachineClass *m)
{
pc_i440fx_2_12_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_11, hw_compat_2_11_len);
compat_props_add(m->compat_props, pc_compat_2_11, pc_compat_2_11_len);
}
DEFINE_I440FX_MACHINE(v2_11, "pc-i440fx-2.11", NULL,
pc_i440fx_2_11_machine_options);
static void pc_i440fx_2_10_machine_options(MachineClass *m)
{
pc_i440fx_2_11_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_10, hw_compat_2_10_len);
compat_props_add(m->compat_props, pc_compat_2_10, pc_compat_2_10_len);
NUMA: Enable adding NUMA node implicitly Linux and Windows need ACPI SRAT table to make memory hotplug work properly, however currently QEMU doesn't create SRAT table if numa options aren't present on CLI. Which breaks both linux and windows guests in certain conditions: * Windows: won't enable memory hotplug without SRAT table at all * Linux: if QEMU is started with initial memory all below 4Gb and no SRAT table present, guest kernel will use nommu DMA ops, which breaks 32bit hw drivers when memory is hotplugged and guest tries to use it with that drivers. Fix above issues by automatically creating a numa node when QEMU is started with memory hotplug enabled but without '-numa' options on CLI. (PS: auto-create numa node only for new machine types so not to break migration). Which would provide SRAT table to guests without explicit -numa options on CLI and would allow: * Windows: to enable memory hotplug * Linux: switch to SWIOTLB DMA ops, to bounce DMA transfers to 32bit allocated buffers that legacy drivers/hw can handle. [Rewritten by Igor] Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alistair Francis <alistair23@gmail.com> Cc: Takao Indoh <indou.takao@jp.fujitsu.com> Cc: Izumi Taku <izumi.taku@jp.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-14 03:34:01 +01:00
m->auto_enable_numa_with_memhp = false;
}
DEFINE_I440FX_MACHINE(v2_10, "pc-i440fx-2.10", NULL,
pc_i440fx_2_10_machine_options);
static void pc_i440fx_2_9_machine_options(MachineClass *m)
{
pc_i440fx_2_10_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_9, hw_compat_2_9_len);
compat_props_add(m->compat_props, pc_compat_2_9, pc_compat_2_9_len);
m->numa_auto_assign_ram = numa_legacy_auto_assign_ram;
}
DEFINE_I440FX_MACHINE(v2_9, "pc-i440fx-2.9", NULL,
pc_i440fx_2_9_machine_options);
static void pc_i440fx_2_8_machine_options(MachineClass *m)
{
pc_i440fx_2_9_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_8, hw_compat_2_8_len);
compat_props_add(m->compat_props, pc_compat_2_8, pc_compat_2_8_len);
}
DEFINE_I440FX_MACHINE(v2_8, "pc-i440fx-2.8", NULL,
pc_i440fx_2_8_machine_options);
static void pc_i440fx_2_7_machine_options(MachineClass *m)
{
pc_i440fx_2_8_machine_options(m);
compat_props_add(m->compat_props, hw_compat_2_7, hw_compat_2_7_len);
compat_props_add(m->compat_props, pc_compat_2_7, pc_compat_2_7_len);
}
DEFINE_I440FX_MACHINE(v2_7, "pc-i440fx-2.7", NULL,
pc_i440fx_2_7_machine_options);
static void pc_i440fx_2_6_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_7_machine_options(m);
pcmc->legacy_cpu_hotplug = true;
pcmc->linuxboot_dma_enabled = false;
compat_props_add(m->compat_props, hw_compat_2_6, hw_compat_2_6_len);
compat_props_add(m->compat_props, pc_compat_2_6, pc_compat_2_6_len);
}
DEFINE_I440FX_MACHINE(v2_6, "pc-i440fx-2.6", NULL,
pc_i440fx_2_6_machine_options);
static void pc_i440fx_2_5_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_6_machine_options(m);
pcmc->save_tsc_khz = false;
m->legacy_fw_cfg_order = 1;
compat_props_add(m->compat_props, hw_compat_2_5, hw_compat_2_5_len);
compat_props_add(m->compat_props, pc_compat_2_5, pc_compat_2_5_len);
}
DEFINE_I440FX_MACHINE(v2_5, "pc-i440fx-2.5", NULL,
pc_i440fx_2_5_machine_options);
static void pc_i440fx_2_4_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_5_machine_options(m);
m->hw_version = "2.4.0";
pcmc->broken_reserved_end = true;
compat_props_add(m->compat_props, hw_compat_2_4, hw_compat_2_4_len);
compat_props_add(m->compat_props, pc_compat_2_4, pc_compat_2_4_len);
}
DEFINE_I440FX_MACHINE(v2_4, "pc-i440fx-2.4", NULL,
pc_i440fx_2_4_machine_options)
static void pc_i440fx_2_3_machine_options(MachineClass *m)
{
pc_i440fx_2_4_machine_options(m);
m->hw_version = "2.3.0";
compat_props_add(m->compat_props, hw_compat_2_3, hw_compat_2_3_len);
compat_props_add(m->compat_props, pc_compat_2_3, pc_compat_2_3_len);
}
DEFINE_I440FX_MACHINE(v2_3, "pc-i440fx-2.3", pc_compat_2_3_fn,
pc_i440fx_2_3_machine_options);
static void pc_i440fx_2_2_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_3_machine_options(m);
m->hw_version = "2.2.0";
m->default_machine_opts = "firmware=bios-256k.bin,suppress-vmdesc=on";
compat_props_add(m->compat_props, hw_compat_2_2, hw_compat_2_2_len);
compat_props_add(m->compat_props, pc_compat_2_2, pc_compat_2_2_len);
pcmc->rsdp_in_ram = false;
}
DEFINE_I440FX_MACHINE(v2_2, "pc-i440fx-2.2", pc_compat_2_2_fn,
pc_i440fx_2_2_machine_options);
static void pc_i440fx_2_1_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_2_machine_options(m);
m->hw_version = "2.1.0";
m->default_display = NULL;
compat_props_add(m->compat_props, hw_compat_2_1, hw_compat_2_1_len);
compat_props_add(m->compat_props, pc_compat_2_1, pc_compat_2_1_len);
pcmc->smbios_uuid_encoded = false;
pcmc->enforce_aligned_dimm = false;
}
DEFINE_I440FX_MACHINE(v2_1, "pc-i440fx-2.1", pc_compat_2_1_fn,
pc_i440fx_2_1_machine_options);
static void pc_i440fx_2_0_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_1_machine_options(m);
m->hw_version = "2.0.0";
compat_props_add(m->compat_props, pc_compat_2_0, pc_compat_2_0_len);
pcmc->smbios_legacy_mode = true;
pcmc->has_reserved_memory = false;
/* This value depends on the actual DSDT and SSDT compiled into
* the source QEMU; unfortunately it depends on the binary and
* not on the machine type, so we cannot make pc-i440fx-1.7 work on
* both QEMU 1.7 and QEMU 2.0.
*
* Large variations cause migration to fail for more than one
* consecutive value of the "-smp" maxcpus option.
*
* For small variations of the kind caused by different iasl versions,
* the 4k rounding usually leaves slack. However, there could be still
* one or two values that break. For QEMU 1.7 and QEMU 2.0 the
* slack is only ~10 bytes before one "-smp maxcpus" value breaks!
*
* 6652 is valid for QEMU 2.0, the right value for pc-i440fx-1.7 on
* QEMU 1.7 it is 6414. For RHEL/CentOS 7.0 it is 6418.
*/
pcmc->legacy_acpi_table_size = 6652;
pcmc->acpi_data_size = 0x10000;
}
DEFINE_I440FX_MACHINE(v2_0, "pc-i440fx-2.0", pc_compat_2_0_fn,
pc_i440fx_2_0_machine_options);
static void pc_i440fx_1_7_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_2_0_machine_options(m);
m->hw_version = "1.7.0";
m->default_machine_opts = NULL;
m->option_rom_has_mr = true;
compat_props_add(m->compat_props, pc_compat_1_7, pc_compat_1_7_len);
pcmc->smbios_defaults = false;
pcmc->gigabyte_align = false;
pcmc->legacy_acpi_table_size = 6414;
}
DEFINE_I440FX_MACHINE(v1_7, "pc-i440fx-1.7", pc_compat_1_7_fn,
pc_i440fx_1_7_machine_options);
static void pc_i440fx_1_6_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
pc_i440fx_1_7_machine_options(m);
m->hw_version = "1.6.0";
m->rom_file_has_mr = false;
compat_props_add(m->compat_props, pc_compat_1_6, pc_compat_1_6_len);
pcmc->has_acpi_build = false;
}
DEFINE_I440FX_MACHINE(v1_6, "pc-i440fx-1.6", pc_compat_1_6_fn,
pc_i440fx_1_6_machine_options);
static void pc_i440fx_1_5_machine_options(MachineClass *m)
{
pc_i440fx_1_6_machine_options(m);
m->hw_version = "1.5.0";
compat_props_add(m->compat_props, pc_compat_1_5, pc_compat_1_5_len);
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v1_5, "pc-i440fx-1.5", pc_compat_1_5_fn,
pc_i440fx_1_5_machine_options);
static void pc_i440fx_1_4_machine_options(MachineClass *m)
{
pc_i440fx_1_5_machine_options(m);
m->hw_version = "1.4.0";
m->hot_add_cpu = NULL;
compat_props_add(m->compat_props, pc_compat_1_4, pc_compat_1_4_len);
}
DEFINE_I440FX_MACHINE(v1_4, "pc-i440fx-1.4", pc_compat_1_4_fn,
pc_i440fx_1_4_machine_options);
static void pc_i440fx_1_3_machine_options(MachineClass *m)
{
X86MachineClass *x86mc = X86_MACHINE_CLASS(m);
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("1.3.0")
{ "usb-tablet", "usb_version", "1" },
{ "virtio-net-pci", "ctrl_mac_addr", "off" },
{ "virtio-net-pci", "mq", "off" },
{ "e1000", "autonegotiation", "off" },
};
pc_i440fx_1_4_machine_options(m);
m->hw_version = "1.3.0";
x86mc->compat_apic_id_mode = true;
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v1_3, "pc-1.3", pc_compat_1_3,
pc_i440fx_1_3_machine_options);
static void pc_i440fx_1_2_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("1.2.0")
{ "nec-usb-xhci", "msi", "off" },
{ "nec-usb-xhci", "msix", "off" },
{ "qxl", "revision", "3" },
{ "qxl-vga", "revision", "3" },
{ "VGA", "mmio", "off" },
};
pc_i440fx_1_3_machine_options(m);
m->hw_version = "1.2.0";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
DEFINE_I440FX_MACHINE(v1_2, "pc-1.2", pc_compat_1_2,
pc_i440fx_1_2_machine_options);
static void pc_i440fx_1_1_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("1.1.0")
{ "virtio-scsi-pci", "hotplug", "off" },
{ "virtio-scsi-pci", "param_change", "off" },
{ "VGA", "vgamem_mb", "8" },
{ "vmware-svga", "vgamem_mb", "8" },
{ "qxl-vga", "vgamem_mb", "8" },
{ "qxl", "vgamem_mb", "8" },
{ "virtio-blk-pci", "config-wce", "off" },
};
pc_i440fx_1_2_machine_options(m);
m->hw_version = "1.1.0";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v1_1, "pc-1.1", pc_compat_1_2,
pc_i440fx_1_1_machine_options);
static void pc_i440fx_1_0_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("1.0")
{ TYPE_ISA_FDC, "check_media_rate", "off" },
{ "virtio-balloon-pci", "class", stringify(PCI_CLASS_MEMORY_RAM) },
{ "apic-common", "vapic", "off" },
{ TYPE_USB_DEVICE, "full-path", "no" },
};
pc_i440fx_1_1_machine_options(m);
m->hw_version = "1.0";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v1_0, "pc-1.0", pc_compat_1_2,
pc_i440fx_1_0_machine_options);
static void pc_i440fx_0_15_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("0.15")
};
pc_i440fx_1_0_machine_options(m);
m->hw_version = "0.15";
m->deprecation_reason = "use a newer machine type instead";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v0_15, "pc-0.15", pc_compat_1_2,
pc_i440fx_0_15_machine_options);
static void pc_i440fx_0_14_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("0.14")
{ "virtio-blk-pci", "event_idx", "off" },
{ "virtio-serial-pci", "event_idx", "off" },
{ "virtio-net-pci", "event_idx", "off" },
{ "virtio-balloon-pci", "event_idx", "off" },
{ "qxl", "revision", "2" },
{ "qxl-vga", "revision", "2" },
};
pc_i440fx_0_15_machine_options(m);
m->hw_version = "0.14";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v0_14, "pc-0.14", pc_compat_1_2,
pc_i440fx_0_14_machine_options);
static void pc_i440fx_0_13_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("0.13")
{ TYPE_PCI_DEVICE, "command_serr_enable", "off" },
{ "AC97", "use_broken_id", "1" },
{ "virtio-9p-pci", "vectors", "0" },
{ "VGA", "rombar", "0" },
{ "vmware-svga", "rombar", "0" },
};
pc_i440fx_0_14_machine_options(m);
m->hw_version = "0.13";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
pcmc->kvmclock_enabled = false;
}
DEFINE_I440FX_MACHINE(v0_13, "pc-0.13", pc_compat_0_13,
pc_i440fx_0_13_machine_options);
static void pc_i440fx_0_12_machine_options(MachineClass *m)
{
static GlobalProperty compat[] = {
PC_CPU_MODEL_IDS("0.12")
{ "virtio-serial-pci", "max_ports", "1" },
{ "virtio-serial-pci", "vectors", "0" },
{ "usb-mouse", "serial", "1" },
{ "usb-tablet", "serial", "1" },
{ "usb-kbd", "serial", "1" },
};
pc_i440fx_0_13_machine_options(m);
m->hw_version = "0.12";
compat_props_add(m->compat_props, compat, G_N_ELEMENTS(compat));
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_I440FX_MACHINE(v0_12, "pc-0.12", pc_compat_0_13,
pc_i440fx_0_12_machine_options);
typedef struct {
uint16_t gpu_device_id;
uint16_t pch_device_id;
uint8_t pch_revision_id;
} IGDDeviceIDInfo;
/* In real world different GPU should have different PCH. But actually
* the different PCH DIDs likely map to different PCH SKUs. We do the
* same thing for the GPU. For PCH, the different SKUs are going to be
* all the same silicon design and implementation, just different
* features turn on and off with fuses. The SW interfaces should be
* consistent across all SKUs in a given family (eg LPT). But just same
* features may not be supported.
*
* Most of these different PCH features probably don't matter to the
* Gfx driver, but obviously any difference in display port connections
* will so it should be fine with any PCH in case of passthrough.
*
* So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
* scenarios, 0x9cc3 for BDW(Broadwell).
*/
static const IGDDeviceIDInfo igd_combo_id_infos[] = {
/* HSW Classic */
{0x0402, 0x8c4e, 0x04}, /* HSWGT1D, HSWD_w7 */
{0x0406, 0x8c4e, 0x04}, /* HSWGT1M, HSWM_w7 */
{0x0412, 0x8c4e, 0x04}, /* HSWGT2D, HSWD_w7 */
{0x0416, 0x8c4e, 0x04}, /* HSWGT2M, HSWM_w7 */
{0x041E, 0x8c4e, 0x04}, /* HSWGT15D, HSWD_w7 */
/* HSW ULT */
{0x0A06, 0x8c4e, 0x04}, /* HSWGT1UT, HSWM_w7 */
{0x0A16, 0x8c4e, 0x04}, /* HSWGT2UT, HSWM_w7 */
{0x0A26, 0x8c4e, 0x06}, /* HSWGT3UT, HSWM_w7 */
{0x0A2E, 0x8c4e, 0x04}, /* HSWGT3UT28W, HSWM_w7 */
{0x0A1E, 0x8c4e, 0x04}, /* HSWGT2UX, HSWM_w7 */
{0x0A0E, 0x8c4e, 0x04}, /* HSWGT1ULX, HSWM_w7 */
/* HSW CRW */
{0x0D26, 0x8c4e, 0x04}, /* HSWGT3CW, HSWM_w7 */
{0x0D22, 0x8c4e, 0x04}, /* HSWGT3CWDT, HSWD_w7 */
/* HSW Server */
{0x041A, 0x8c4e, 0x04}, /* HSWSVGT2, HSWD_w7 */
/* HSW SRVR */
{0x040A, 0x8c4e, 0x04}, /* HSWSVGT1, HSWD_w7 */
/* BSW */
{0x1606, 0x9cc3, 0x03}, /* BDWULTGT1, BDWM_w7 */
{0x1616, 0x9cc3, 0x03}, /* BDWULTGT2, BDWM_w7 */
{0x1626, 0x9cc3, 0x03}, /* BDWULTGT3, BDWM_w7 */
{0x160E, 0x9cc3, 0x03}, /* BDWULXGT1, BDWM_w7 */
{0x161E, 0x9cc3, 0x03}, /* BDWULXGT2, BDWM_w7 */
{0x1602, 0x9cc3, 0x03}, /* BDWHALOGT1, BDWM_w7 */
{0x1612, 0x9cc3, 0x03}, /* BDWHALOGT2, BDWM_w7 */
{0x1622, 0x9cc3, 0x03}, /* BDWHALOGT3, BDWM_w7 */
{0x162B, 0x9cc3, 0x03}, /* BDWHALO28W, BDWM_w7 */
{0x162A, 0x9cc3, 0x03}, /* BDWGT3WRKS, BDWM_w7 */
{0x162D, 0x9cc3, 0x03}, /* BDWGT3SRVR, BDWM_w7 */
};
static void isa_bridge_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
dc->desc = "ISA bridge faked to support IGD PT";
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->class_id = PCI_CLASS_BRIDGE_ISA;
};
static TypeInfo isa_bridge_info = {
.name = "igd-passthrough-isa-bridge",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PCIDevice),
.class_init = isa_bridge_class_init,
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27 21:56:34 +02:00
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
};
static void pt_graphics_register_types(void)
{
type_register_static(&isa_bridge_info);
}
type_init(pt_graphics_register_types)
void igd_passthrough_isa_bridge_create(PCIBus *bus, uint16_t gpu_dev_id)
{
struct PCIDevice *bridge_dev;
int i, num;
uint16_t pch_dev_id = 0xffff;
uint8_t pch_rev_id;
num = ARRAY_SIZE(igd_combo_id_infos);
for (i = 0; i < num; i++) {
if (gpu_dev_id == igd_combo_id_infos[i].gpu_device_id) {
pch_dev_id = igd_combo_id_infos[i].pch_device_id;
pch_rev_id = igd_combo_id_infos[i].pch_revision_id;
}
}
if (pch_dev_id == 0xffff) {
return;
}
/* Currently IGD drivers always need to access PCH by 1f.0. */
bridge_dev = pci_create_simple(bus, PCI_DEVFN(0x1f, 0),
"igd-passthrough-isa-bridge");
/*
* Note that vendor id is always PCI_VENDOR_ID_INTEL.
*/
if (!bridge_dev) {
fprintf(stderr, "set igd-passthrough-isa-bridge failed!\n");
return;
}
pci_config_set_device_id(bridge_dev->config, pch_dev_id);
pci_config_set_revision(bridge_dev->config, pch_rev_id);
}
static void isapc_machine_options(MachineClass *m)
{
PCMachineClass *pcmc = PC_MACHINE_CLASS(m);
m->desc = "ISA-only PC";
m->max_cpus = 1;
m->option_rom_has_mr = true;
m->rom_file_has_mr = false;
pcmc->pci_enabled = false;
pcmc->has_acpi_build = false;
pcmc->smbios_defaults = false;
pcmc->gigabyte_align = false;
pcmc->smbios_legacy_mode = true;
pcmc->has_reserved_memory = false;
pcmc->default_nic_model = "ne2k_isa";
m->default_cpu_type = X86_CPU_TYPE_NAME("486");
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_PC_MACHINE(isapc, "isapc", pc_init_isa,
isapc_machine_options);
#ifdef CONFIG_XEN
static void xenfv_machine_options(MachineClass *m)
{
m->desc = "Xen Fully-virtualized PC";
m->max_cpus = HVM_MAX_VCPUS;
m->default_machine_opts = "accel=xen";
}
pc: Define MACHINE_OPTIONS macros consistently for all machines Define a MACHINE_OPTIONS macro for each PC machine, and move every field inside the QEMUMachine structs to the macros, except for name, init, and compat_props. This also ensures that all MACHINE_OPTIONS inherit the fields from the next version, so their definitions carry only the changes that exist between one version and the next one. Comments about specific cases: pc-*-2.1: Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin" PC_*_2_2_MACHINE_OPTIONS is: PC_*_2_3_MACHINE_OPTIONS which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std" The only difference between 2_1 and 2_2 is .default_display, that's why we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having multiple initializers for a field is allowed by C99, and the last initializer overrides the previous ones. So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS as: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL pc-*-1.7: PC_*_1_7_MACHINE_OPTIONS was defined as: PC_*_MACHINE_OPTIONS PC_*_2_0_MACHINE_OPTIONS is defined as: PC_*_2_1_MACHINE_OPTIONS which is expanded to: PC_*_2_2_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_2_3_MACHINE_OPTIONS, .default_display = NULL which is expanded to: PC_*_MACHINE_OPTIONS, .default_machine_opts = "firmware=bios-256k.bin", .default_display = "std", .default_display = NULL /* overrides the previous line */ So, the only difference between PC_*_1_7_MACHINE_OPTIONS and PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL). So we can keep the macro reuse pattern and define PC_*_2_0_MACHINE_OPTIONS as: PC_*_2_0_MACHINE_OPTIONS, .default_machine_opts = NULL pc-*-2.4 (alias and is_default fields): Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro, and clear it in the 2.3 macro (that reuses the 2.4 macro). hw_machine: As all the machines older than v1.0 set hw_version explicitly, we can safely move the field to the MACHINE_OPTIONS macros without affecting the other versions that reuse them. init function: Some machines had the init function set inside the MACHINE_OPTIONS macro. Move it to the QEMUMachine declaration, to keep it consistent with the other machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-15 19:18:52 +02:00
DEFINE_PC_MACHINE(xenfv, "xenfv", pc_xen_hvm_init,
xenfv_machine_options);
#endif