qemu-e2k/block/crypto.c

955 lines
28 KiB
C
Raw Normal View History

block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
/*
* QEMU block full disk encryption
*
* Copyright (c) 2015-2016 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "block/block_int.h"
#include "block/qdict.h"
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
#include "sysemu/block-backend.h"
#include "crypto/block.h"
#include "qapi/opts-visitor.h"
#include "qapi/qapi-visit-crypto.h"
#include "qapi/qobject-input-visitor.h"
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
#include "qapi/error.h"
#include "qemu/module.h"
#include "qemu/option.h"
crypto.c: cleanup created file when block_crypto_co_create_opts_luks fails When using a non-UTF8 secret to create a volume using qemu-img, the following error happens: $ qemu-img create -f luks --object secret,id=vol_1_encrypt0,file=vol_resize_pool.vol_1.secret.qzVQrI -o key-secret=vol_1_encrypt0 /var/tmp/pool_target/vol_1 10240K Formatting '/var/tmp/pool_target/vol_1', fmt=luks size=10485760 key-secret=vol_1_encrypt0 qemu-img: /var/tmp/pool_target/vol_1: Data from secret vol_1_encrypt0 is not valid UTF-8 However, the created file '/var/tmp/pool_target/vol_1' is left behind in the file system after the failure. This behavior can be observed when creating the volume using Libvirt, via 'virsh vol-create', and then getting "volume target path already exist" errors when trying to re-create the volume. The volume file is created inside block_crypto_co_create_opts_luks(), in block/crypto.c. If the bdrv_create_file() call is successful but any succeeding step fails*, the existing 'fail' label does not take into account the created file, leaving it behind. This patch changes block_crypto_co_create_opts_luks() to delete 'filename' in case of failure. A failure in this point means that the volume is now truncated/corrupted, so even if 'filename' was an existing volume before calling qemu-img, it is now unusable. Deleting the file it is not much worse than leaving it in the filesystem in this scenario, and we don't have to deal with checking the file pre-existence in the code. * in our case, block_crypto_co_create_generic calls qcrypto_block_create, which calls qcrypto_block_luks_create, and this function fails when calling qcrypto_secret_lookup_as_utf8. Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com> Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20200130213907.2830642-4-danielhb413@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-30 22:39:06 +01:00
#include "qemu/cutils.h"
#include "crypto.h"
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
typedef struct BlockCrypto BlockCrypto;
struct BlockCrypto {
QCryptoBlock *block;
bool updating_keys;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
};
static int block_crypto_probe_generic(QCryptoBlockFormat format,
const uint8_t *buf,
int buf_size,
const char *filename)
{
if (qcrypto_block_has_format(format, buf, buf_size)) {
return 100;
} else {
return 0;
}
}
static ssize_t block_crypto_read_func(QCryptoBlock *block,
size_t offset,
uint8_t *buf,
size_t buflen,
void *opaque,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
BlockDriverState *bs = opaque;
ssize_t ret;
ret = bdrv_pread(bs->file, offset, buf, buflen);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not read encryption header");
return ret;
}
return ret;
}
static ssize_t block_crypto_write_func(QCryptoBlock *block,
size_t offset,
const uint8_t *buf,
size_t buflen,
void *opaque,
Error **errp)
{
BlockDriverState *bs = opaque;
ssize_t ret;
ret = bdrv_pwrite(bs->file, offset, buf, buflen);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not write encryption header");
return ret;
}
return ret;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
struct BlockCryptoCreateData {
BlockBackend *blk;
uint64_t size;
PreallocMode prealloc;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
};
static ssize_t block_crypto_create_write_func(QCryptoBlock *block,
size_t offset,
const uint8_t *buf,
size_t buflen,
void *opaque,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
struct BlockCryptoCreateData *data = opaque;
ssize_t ret;
ret = blk_pwrite(data->blk, offset, buf, buflen, 0);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not write encryption header");
return ret;
}
return ret;
}
static ssize_t block_crypto_create_init_func(QCryptoBlock *block,
size_t headerlen,
void *opaque,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
struct BlockCryptoCreateData *data = opaque;
Error *local_error = NULL;
int ret;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (data->size > INT64_MAX || headerlen > INT64_MAX - data->size) {
ret = -EFBIG;
goto error;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
/* User provided size should reflect amount of space made
* available to the guest, so we must take account of that
* which will be used by the crypto header
*/
ret = blk_truncate(data->blk, data->size + headerlen, false,
data->prealloc, 0, &local_error);
if (ret >= 0) {
return ret;
}
error:
if (ret == -EFBIG) {
/* Replace the error message with a better one */
error_free(local_error);
error_setg(errp, "The requested file size is too large");
} else {
error_propagate(errp, local_error);
}
return ret;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
}
static QemuOptsList block_crypto_runtime_opts_luks = {
.name = "crypto",
.head = QTAILQ_HEAD_INITIALIZER(block_crypto_runtime_opts_luks.head),
.desc = {
BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(""),
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{ /* end of list */ }
},
};
static QemuOptsList block_crypto_create_opts_luks = {
.name = "crypto",
.head = QTAILQ_HEAD_INITIALIZER(block_crypto_create_opts_luks.head),
.desc = {
{
.name = BLOCK_OPT_SIZE,
.type = QEMU_OPT_SIZE,
.help = "Virtual disk size"
},
BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""),
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{ /* end of list */ }
},
};
static QemuOptsList block_crypto_amend_opts_luks = {
.name = "crypto",
.head = QTAILQ_HEAD_INITIALIZER(block_crypto_create_opts_luks.head),
.desc = {
BLOCK_CRYPTO_OPT_DEF_LUKS_STATE(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_KEYSLOT(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_OLD_SECRET(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_NEW_SECRET(""),
BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""),
{ /* end of list */ }
},
};
QCryptoBlockOpenOptions *
block_crypto_open_opts_init(QDict *opts, Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
Visitor *v;
QCryptoBlockOpenOptions *ret;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
v = qobject_input_visitor_new_flat_confused(opts, errp);
if (!v) {
return NULL;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
visit_type_QCryptoBlockOpenOptions(v, NULL, &ret, errp);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
visit_free(v);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
return ret;
}
QCryptoBlockCreateOptions *
block_crypto_create_opts_init(QDict *opts, Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
Visitor *v;
QCryptoBlockCreateOptions *ret;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
v = qobject_input_visitor_new_flat_confused(opts, errp);
if (!v) {
return NULL;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
visit_type_QCryptoBlockCreateOptions(v, NULL, &ret, errp);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
visit_free(v);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
return ret;
}
QCryptoBlockAmendOptions *
block_crypto_amend_opts_init(QDict *opts, Error **errp)
{
Visitor *v;
QCryptoBlockAmendOptions *ret;
v = qobject_input_visitor_new_flat_confused(opts, errp);
if (!v) {
return NULL;
}
visit_type_QCryptoBlockAmendOptions(v, NULL, &ret, errp);
visit_free(v);
return ret;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
static int block_crypto_open_generic(QCryptoBlockFormat format,
QemuOptsList *opts_spec,
BlockDriverState *bs,
QDict *options,
int flags,
Error **errp)
{
BlockCrypto *crypto = bs->opaque;
QemuOpts *opts = NULL;
int ret = -EINVAL;
QCryptoBlockOpenOptions *open_opts = NULL;
unsigned int cflags = 0;
QDict *cryptoopts = NULL;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
BDRV_CHILD_IMAGE, false, errp);
if (!bs->file) {
return -EINVAL;
}
bs->supported_write_flags = BDRV_REQ_FUA &
bs->file->bs->supported_write_flags;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
opts = qemu_opts_create(opts_spec, NULL, 0, &error_abort);
if (!qemu_opts_absorb_qdict(opts, options, errp)) {
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
goto cleanup;
}
cryptoopts = qemu_opts_to_qdict(opts, NULL);
qdict_put_str(cryptoopts, "format", QCryptoBlockFormat_str(format));
open_opts = block_crypto_open_opts_init(cryptoopts, errp);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (!open_opts) {
goto cleanup;
}
if (flags & BDRV_O_NO_IO) {
cflags |= QCRYPTO_BLOCK_OPEN_NO_IO;
}
crypto->block = qcrypto_block_open(open_opts, NULL,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
block_crypto_read_func,
bs,
cflags,
1,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
errp);
if (!crypto->block) {
ret = -EIO;
goto cleanup;
}
bs->encrypted = true;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
ret = 0;
cleanup:
qobject_unref(cryptoopts);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qapi_free_QCryptoBlockOpenOptions(open_opts);
return ret;
}
static int block_crypto_co_create_generic(BlockDriverState *bs,
int64_t size,
QCryptoBlockCreateOptions *opts,
PreallocMode prealloc,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
int ret;
BlockBackend *blk;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
QCryptoBlock *crypto = NULL;
struct BlockCryptoCreateData data;
blk = blk_new_with_bs(bs, BLK_PERM_WRITE | BLK_PERM_RESIZE, BLK_PERM_ALL,
errp);
if (!blk) {
ret = -EPERM;
goto cleanup;
}
if (prealloc == PREALLOC_MODE_METADATA) {
prealloc = PREALLOC_MODE_OFF;
}
data = (struct BlockCryptoCreateData) {
.blk = blk,
.size = size,
.prealloc = prealloc,
};
crypto = qcrypto_block_create(opts, NULL,
block_crypto_create_init_func,
block_crypto_create_write_func,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
&data,
errp);
if (!crypto) {
ret = -EIO;
goto cleanup;
}
ret = 0;
cleanup:
qcrypto_block_free(crypto);
blk_unref(blk);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
return ret;
}
static int coroutine_fn
block_crypto_co_truncate(BlockDriverState *bs, int64_t offset, bool exact,
PreallocMode prealloc, BdrvRequestFlags flags,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
BlockCrypto *crypto = bs->opaque;
uint64_t payload_offset =
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qcrypto_block_get_payload_offset(crypto->block);
if (payload_offset > INT64_MAX - offset) {
error_setg(errp, "The requested file size is too large");
return -EFBIG;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
offset += payload_offset;
return bdrv_co_truncate(bs->file, offset, exact, prealloc, 0, errp);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
}
static void block_crypto_close(BlockDriverState *bs)
{
BlockCrypto *crypto = bs->opaque;
qcrypto_block_free(crypto->block);
}
static int block_crypto_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
/* nothing needs checking */
return 0;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
/*
* 1 MB bounce buffer gives good performance / memory tradeoff
* when using cache=none|directsync.
*/
#define BLOCK_CRYPTO_MAX_IO_SIZE (1024 * 1024)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
static coroutine_fn int
block_crypto_co_preadv(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
BlockCrypto *crypto = bs->opaque;
uint64_t cur_bytes; /* number of bytes in current iteration */
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
uint64_t bytes_done = 0;
uint8_t *cipher_data = NULL;
QEMUIOVector hd_qiov;
int ret = 0;
uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
uint64_t payload_offset = qcrypto_block_get_payload_offset(crypto->block);
assert(!flags);
assert(payload_offset < INT64_MAX);
assert(QEMU_IS_ALIGNED(offset, sector_size));
assert(QEMU_IS_ALIGNED(bytes, sector_size));
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qemu_iovec_init(&hd_qiov, qiov->niov);
/* Bounce buffer because we don't wish to expose cipher text
* in qiov which points to guest memory.
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
*/
cipher_data =
qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_IO_SIZE,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qiov->size));
if (cipher_data == NULL) {
ret = -ENOMEM;
goto cleanup;
}
while (bytes) {
cur_bytes = MIN(bytes, BLOCK_CRYPTO_MAX_IO_SIZE);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qemu_iovec_reset(&hd_qiov);
qemu_iovec_add(&hd_qiov, cipher_data, cur_bytes);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
ret = bdrv_co_preadv(bs->file, payload_offset + offset + bytes_done,
cur_bytes, &hd_qiov, 0);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (ret < 0) {
goto cleanup;
}
if (qcrypto_block_decrypt(crypto->block, offset + bytes_done,
cipher_data, cur_bytes, NULL) < 0) {
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
ret = -EIO;
goto cleanup;
}
qemu_iovec_from_buf(qiov, bytes_done, cipher_data, cur_bytes);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
bytes -= cur_bytes;
bytes_done += cur_bytes;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
}
cleanup:
qemu_iovec_destroy(&hd_qiov);
qemu_vfree(cipher_data);
return ret;
}
static coroutine_fn int
block_crypto_co_pwritev(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
BlockCrypto *crypto = bs->opaque;
uint64_t cur_bytes; /* number of bytes in current iteration */
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
uint64_t bytes_done = 0;
uint8_t *cipher_data = NULL;
QEMUIOVector hd_qiov;
int ret = 0;
uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
uint64_t payload_offset = qcrypto_block_get_payload_offset(crypto->block);
assert(!(flags & ~BDRV_REQ_FUA));
assert(payload_offset < INT64_MAX);
assert(QEMU_IS_ALIGNED(offset, sector_size));
assert(QEMU_IS_ALIGNED(bytes, sector_size));
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qemu_iovec_init(&hd_qiov, qiov->niov);
/* Bounce buffer because we're not permitted to touch
* contents of qiov - it points to guest memory.
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
*/
cipher_data =
qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_IO_SIZE,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qiov->size));
if (cipher_data == NULL) {
ret = -ENOMEM;
goto cleanup;
}
while (bytes) {
cur_bytes = MIN(bytes, BLOCK_CRYPTO_MAX_IO_SIZE);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
qemu_iovec_to_buf(qiov, bytes_done, cipher_data, cur_bytes);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (qcrypto_block_encrypt(crypto->block, offset + bytes_done,
cipher_data, cur_bytes, NULL) < 0) {
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
ret = -EIO;
goto cleanup;
}
qemu_iovec_reset(&hd_qiov);
qemu_iovec_add(&hd_qiov, cipher_data, cur_bytes);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
ret = bdrv_co_pwritev(bs->file, payload_offset + offset + bytes_done,
cur_bytes, &hd_qiov, flags);
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
if (ret < 0) {
goto cleanup;
}
bytes -= cur_bytes;
bytes_done += cur_bytes;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
}
cleanup:
qemu_iovec_destroy(&hd_qiov);
qemu_vfree(cipher_data);
return ret;
}
static void block_crypto_refresh_limits(BlockDriverState *bs, Error **errp)
{
BlockCrypto *crypto = bs->opaque;
uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
bs->bl.request_alignment = sector_size; /* No sub-sector I/O */
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
static int64_t block_crypto_getlength(BlockDriverState *bs)
{
BlockCrypto *crypto = bs->opaque;
int64_t len = bdrv_getlength(bs->file->bs);
uint64_t offset = qcrypto_block_get_payload_offset(crypto->block);
assert(offset < INT64_MAX);
if (offset > len) {
return -EIO;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
len -= offset;
return len;
}
static BlockMeasureInfo *block_crypto_measure(QemuOpts *opts,
BlockDriverState *in_bs,
Error **errp)
{
g_autoptr(QCryptoBlockCreateOptions) create_opts = NULL;
Error *local_err = NULL;
BlockMeasureInfo *info;
uint64_t size;
size_t luks_payload_size;
QDict *cryptoopts;
/*
* Preallocation mode doesn't affect size requirements but we must consume
* the option.
*/
g_free(qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC));
size = qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0);
if (in_bs) {
int64_t ssize = bdrv_getlength(in_bs);
if (ssize < 0) {
error_setg_errno(&local_err, -ssize,
"Unable to get image virtual_size");
goto err;
}
size = ssize;
}
cryptoopts = qemu_opts_to_qdict_filtered(opts, NULL,
&block_crypto_create_opts_luks, true);
qdict_put_str(cryptoopts, "format", "luks");
create_opts = block_crypto_create_opts_init(cryptoopts, &local_err);
qobject_unref(cryptoopts);
if (!create_opts) {
goto err;
}
if (!qcrypto_block_calculate_payload_offset(create_opts, NULL,
&luks_payload_size,
&local_err)) {
goto err;
}
/*
* Unallocated blocks are still encrypted so allocation status makes no
* difference to the file size.
*/
qcow2: Expose bitmaps' size during measure It's useful to know how much space can be occupied by qcow2 persistent bitmaps, even though such metadata is unrelated to the guest-visible data. Report this value as an additional QMP field, present when measuring an existing image and output format that both support bitmaps. Update iotest 178 and 190 to updated output, as well as new coverage in 190 demonstrating non-zero values made possible with the recently-added qemu-img bitmap command (see 3b51ab4b). The new 'bitmaps size:' field is displayed automatically as part of 'qemu-img measure' any time it is present in QMP (that is, any time both the source image being measured and destination format support bitmaps, even if the measurement is 0 because there are no bitmaps present). If the field is absent, it means that no bitmaps can be copied (source, destination, or both lack bitmaps, including when measuring based on size rather than on a source image). This behavior is compatible with an upcoming patch adding 'qemu-img convert --bitmaps': that command will fail in the same situations where this patch omits the field. The addition of a new field demonstrates why we should always zero-initialize qapi C structs; while the qcow2 driver still fully populates all fields, the raw and crypto drivers had to be tweaked to avoid uninitialized data. Consideration was also given towards having a 'qemu-img measure --bitmaps' which errors out when bitmaps are not possible, and otherwise sums the bitmaps into the existing allocation totals rather than displaying as a separate field, as a potential convenience factor. But this was ultimately decided to be more complexity than necessary when the QMP interface was sufficient enough with bitmaps remaining a separate field. See also: https://bugzilla.redhat.com/1779904 Reported-by: Nir Soffer <nsoffer@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521192137.1120211-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-21 21:21:34 +02:00
info = g_new0(BlockMeasureInfo, 1);
info->fully_allocated = luks_payload_size + size;
info->required = luks_payload_size + size;
return info;
err:
error_propagate(errp, local_err);
return NULL;
}
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
static int block_crypto_probe_luks(const uint8_t *buf,
int buf_size,
const char *filename) {
return block_crypto_probe_generic(Q_CRYPTO_BLOCK_FORMAT_LUKS,
buf, buf_size, filename);
}
static int block_crypto_open_luks(BlockDriverState *bs,
QDict *options,
int flags,
Error **errp)
{
return block_crypto_open_generic(Q_CRYPTO_BLOCK_FORMAT_LUKS,
&block_crypto_runtime_opts_luks,
bs, options, flags, errp);
}
static int coroutine_fn
block_crypto_co_create_luks(BlockdevCreateOptions *create_options, Error **errp)
{
BlockdevCreateOptionsLUKS *luks_opts;
BlockDriverState *bs = NULL;
QCryptoBlockCreateOptions create_opts;
PreallocMode preallocation = PREALLOC_MODE_OFF;
int ret;
assert(create_options->driver == BLOCKDEV_DRIVER_LUKS);
luks_opts = &create_options->u.luks;
bs = bdrv_open_blockdev_ref(luks_opts->file, errp);
if (bs == NULL) {
return -EIO;
}
create_opts = (QCryptoBlockCreateOptions) {
.format = Q_CRYPTO_BLOCK_FORMAT_LUKS,
.u.luks = *qapi_BlockdevCreateOptionsLUKS_base(luks_opts),
};
if (luks_opts->has_preallocation) {
preallocation = luks_opts->preallocation;
}
ret = block_crypto_co_create_generic(bs, luks_opts->size, &create_opts,
preallocation, errp);
if (ret < 0) {
goto fail;
}
ret = 0;
fail:
bdrv_unref(bs);
return ret;
}
static int coroutine_fn block_crypto_co_create_opts_luks(BlockDriver *drv,
const char *filename,
QemuOpts *opts,
Error **errp)
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
{
QCryptoBlockCreateOptions *create_opts = NULL;
BlockDriverState *bs = NULL;
QDict *cryptoopts;
PreallocMode prealloc;
char *buf = NULL;
int64_t size;
int ret;
Error *local_err = NULL;
/* Parse options */
size = qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0);
buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
prealloc = qapi_enum_parse(&PreallocMode_lookup, buf,
PREALLOC_MODE_OFF, &local_err);
g_free(buf);
if (local_err) {
error_propagate(errp, local_err);
return -EINVAL;
}
cryptoopts = qemu_opts_to_qdict_filtered(opts, NULL,
&block_crypto_create_opts_luks,
true);
qdict_put_str(cryptoopts, "format", "luks");
create_opts = block_crypto_create_opts_init(cryptoopts, errp);
if (!create_opts) {
ret = -EINVAL;
goto fail;
}
/* Create protocol layer */
ret = bdrv_create_file(filename, opts, errp);
if (ret < 0) {
goto fail;
}
bs = bdrv_open(filename, NULL, NULL,
BDRV_O_RDWR | BDRV_O_RESIZE | BDRV_O_PROTOCOL, errp);
if (!bs) {
ret = -EINVAL;
goto fail;
}
/* Create format layer */
ret = block_crypto_co_create_generic(bs, size, create_opts, prealloc, errp);
if (ret < 0) {
goto fail;
}
ret = 0;
fail:
crypto.c: cleanup created file when block_crypto_co_create_opts_luks fails When using a non-UTF8 secret to create a volume using qemu-img, the following error happens: $ qemu-img create -f luks --object secret,id=vol_1_encrypt0,file=vol_resize_pool.vol_1.secret.qzVQrI -o key-secret=vol_1_encrypt0 /var/tmp/pool_target/vol_1 10240K Formatting '/var/tmp/pool_target/vol_1', fmt=luks size=10485760 key-secret=vol_1_encrypt0 qemu-img: /var/tmp/pool_target/vol_1: Data from secret vol_1_encrypt0 is not valid UTF-8 However, the created file '/var/tmp/pool_target/vol_1' is left behind in the file system after the failure. This behavior can be observed when creating the volume using Libvirt, via 'virsh vol-create', and then getting "volume target path already exist" errors when trying to re-create the volume. The volume file is created inside block_crypto_co_create_opts_luks(), in block/crypto.c. If the bdrv_create_file() call is successful but any succeeding step fails*, the existing 'fail' label does not take into account the created file, leaving it behind. This patch changes block_crypto_co_create_opts_luks() to delete 'filename' in case of failure. A failure in this point means that the volume is now truncated/corrupted, so even if 'filename' was an existing volume before calling qemu-img, it is now unusable. Deleting the file it is not much worse than leaving it in the filesystem in this scenario, and we don't have to deal with checking the file pre-existence in the code. * in our case, block_crypto_co_create_generic calls qcrypto_block_create, which calls qcrypto_block_luks_create, and this function fails when calling qcrypto_secret_lookup_as_utf8. Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com> Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20200130213907.2830642-4-danielhb413@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-30 22:39:06 +01:00
/*
* If an error occurred, delete 'filename'. Even if the file existed
* beforehand, it has been truncated and corrupted in the process.
*/
if (ret && bs) {
Error *local_delete_err = NULL;
int r_del = bdrv_co_delete_file(bs, &local_delete_err);
/*
* ENOTSUP will happen if the block driver doesn't support
* the 'bdrv_co_delete_file' interface. This is a predictable
* scenario and shouldn't be reported back to the user.
*/
if ((r_del < 0) && (r_del != -ENOTSUP)) {
error_report_err(local_delete_err);
}
}
bdrv_unref(bs);
qapi_free_QCryptoBlockCreateOptions(create_opts);
qobject_unref(cryptoopts);
return ret;
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
}
static int block_crypto_get_info_luks(BlockDriverState *bs,
BlockDriverInfo *bdi)
{
BlockDriverInfo subbdi;
int ret;
ret = bdrv_get_info(bs->file->bs, &subbdi);
if (ret != 0) {
return ret;
}
bdi->cluster_size = subbdi.cluster_size;
return 0;
}
static ImageInfoSpecific *
block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
{
BlockCrypto *crypto = bs->opaque;
ImageInfoSpecific *spec_info;
QCryptoBlockInfo *info;
info = qcrypto_block_get_info(crypto->block, errp);
if (!info) {
return NULL;
}
assert(info->format == Q_CRYPTO_BLOCK_FORMAT_LUKS);
spec_info = g_new(ImageInfoSpecific, 1);
spec_info->type = IMAGE_INFO_SPECIFIC_KIND_LUKS;
spec_info->u.luks.data = g_new(QCryptoBlockInfoLUKS, 1);
*spec_info->u.luks.data = info->u.luks;
/* Blank out pointers we've just stolen to avoid double free */
memset(&info->u.luks, 0, sizeof(info->u.luks));
qapi_free_QCryptoBlockInfo(info);
return spec_info;
}
static int
block_crypto_amend_options_generic_luks(BlockDriverState *bs,
QCryptoBlockAmendOptions *amend_options,
bool force,
Error **errp)
{
BlockCrypto *crypto = bs->opaque;
int ret;
assert(crypto);
assert(crypto->block);
/* apply for exclusive read/write permissions to the underlying file*/
crypto->updating_keys = true;
ret = bdrv_child_refresh_perms(bs, bs->file, errp);
if (ret) {
goto cleanup;
}
ret = qcrypto_block_amend_options(crypto->block,
block_crypto_read_func,
block_crypto_write_func,
bs,
amend_options,
force,
errp);
cleanup:
/* release exclusive read/write permissions to the underlying file*/
crypto->updating_keys = false;
bdrv_child_refresh_perms(bs, bs->file, errp);
return ret;
}
static int
block_crypto_amend_options_luks(BlockDriverState *bs,
QemuOpts *opts,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque,
bool force,
Error **errp)
{
BlockCrypto *crypto = bs->opaque;
QDict *cryptoopts = NULL;
QCryptoBlockAmendOptions *amend_options = NULL;
int ret = -EINVAL;
assert(crypto);
assert(crypto->block);
cryptoopts = qemu_opts_to_qdict(opts, NULL);
qdict_put_str(cryptoopts, "format", "luks");
amend_options = block_crypto_amend_opts_init(cryptoopts, errp);
qobject_unref(cryptoopts);
if (!amend_options) {
goto cleanup;
}
ret = block_crypto_amend_options_generic_luks(bs, amend_options,
force, errp);
cleanup:
qapi_free_QCryptoBlockAmendOptions(amend_options);
return ret;
}
static int
coroutine_fn block_crypto_co_amend_luks(BlockDriverState *bs,
BlockdevAmendOptions *opts,
bool force,
Error **errp)
{
QCryptoBlockAmendOptions amend_opts;
amend_opts = (QCryptoBlockAmendOptions) {
.format = Q_CRYPTO_BLOCK_FORMAT_LUKS,
.u.luks = *qapi_BlockdevAmendOptionsLUKS_base(&opts->u.luks),
};
return block_crypto_amend_options_generic_luks(bs, &amend_opts,
force, errp);
}
static void
block_crypto_child_perms(BlockDriverState *bs, BdrvChild *c,
const BdrvChildRole role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
BlockCrypto *crypto = bs->opaque;
bdrv_default_perms(bs, c, role, reopen_queue, perm, shared, nperm, nshared);
/*
* For backward compatibility, manually share the write
* and resize permission
*/
*nshared |= shared & (BLK_PERM_WRITE | BLK_PERM_RESIZE);
/*
* Since we are not fully a format driver, don't always request
* the read/resize permission but only when explicitly
* requested
*/
*nperm &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
*nperm |= perm & (BLK_PERM_WRITE | BLK_PERM_RESIZE);
/*
* This driver doesn't modify LUKS metadata except
* when updating the encryption slots.
* Thus unlike a proper format driver we don't ask for
* shared write/read permission. However we need it
* when we are updating the keys, to ensure that only we
* have access to the device.
*
* Encryption update will set the crypto->updating_keys
* during that period and refresh permissions
*
*/
if (crypto->updating_keys) {
/* need exclusive write access for header update */
*nperm |= BLK_PERM_WRITE;
/* unshare read and write permission */
*nshared &= ~(BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE);
}
}
static const char *const block_crypto_strong_runtime_opts[] = {
BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
NULL
};
static BlockDriver bdrv_crypto_luks = {
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
.format_name = "luks",
.instance_size = sizeof(BlockCrypto),
.bdrv_probe = block_crypto_probe_luks,
.bdrv_open = block_crypto_open_luks,
.bdrv_close = block_crypto_close,
.bdrv_child_perm = block_crypto_child_perms,
.bdrv_co_create = block_crypto_co_create_luks,
.bdrv_co_create_opts = block_crypto_co_create_opts_luks,
.bdrv_co_truncate = block_crypto_co_truncate,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
.create_opts = &block_crypto_create_opts_luks,
.amend_opts = &block_crypto_amend_opts_luks,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
.bdrv_reopen_prepare = block_crypto_reopen_prepare,
.bdrv_refresh_limits = block_crypto_refresh_limits,
.bdrv_co_preadv = block_crypto_co_preadv,
.bdrv_co_pwritev = block_crypto_co_pwritev,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
.bdrv_getlength = block_crypto_getlength,
.bdrv_measure = block_crypto_measure,
.bdrv_get_info = block_crypto_get_info_luks,
.bdrv_get_specific_info = block_crypto_get_specific_info_luks,
.bdrv_amend_options = block_crypto_amend_options_luks,
.bdrv_co_amend = block_crypto_co_amend_luks,
.is_format = true,
.strong_runtime_opts = block_crypto_strong_runtime_opts,
block: add generic full disk encryption driver Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21 15:11:47 +01:00
};
static void block_crypto_init(void)
{
bdrv_register(&bdrv_crypto_luks);
}
block_init(block_crypto_init);