qemu-e2k/hw/acpi/Kconfig

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

81 lines
1.1 KiB
Plaintext
Raw Normal View History

config ACPI
bool
config ACPI_X86
bool
select ACPI
select ACPI_NVDIMM
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 16:40:49 +02:00
select ACPI_CXL
select ACPI_CPU_HOTPLUG
select ACPI_MEMORY_HOTPLUG
select ACPI_HMAT
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 09:14:09 +02:00
select ACPI_PCIHP
select ACPI_ERST
config ACPI_ICH9
bool
select ACPI_SMBUS
select ACPI_X86
select APM
config ACPI_CPU_HOTPLUG
bool
config ACPI_MEMORY_HOTPLUG
bool
select MEM_DEVICE
config ACPI_NVDIMM
bool
depends on ACPI
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 09:14:09 +02:00
config ACPI_PIIX4
bool
select ACPI
select ACPI_SMBUS
select APM
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 09:14:09 +02:00
config ACPI_PCIHP
bool
depends on ACPI
config ACPI_PCI_BRIDGE
bool
depends on ACPI && PCI && ACPI_PCIHP
config ACPI_HMAT
bool
depends on ACPI
config ACPI_APEI
bool
depends on ACPI
config ACPI_PCI
bool
depends on ACPI && PCI
config ACPI_VMGENID
bool
default y
depends on PC
config ACPI_VIOT
bool
depends on ACPI
config ACPI_HW_REDUCED
hw/acpi/Kconfig: Add missing Kconfig dependencies (build error) The 'microvm' machine misses various dependencies: /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:247: undefined reference to `acpi_build_tables_init' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:192: undefined reference to `bios_linker_loader_alloc' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:121: undefined reference to `init_aml_allocator' /usr/bin/ld: hw/i386/acpi-microvm.c:124: undefined reference to `acpi_data_push' /usr/bin/ld: hw/i386/acpi-microvm.c:126: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:129: undefined reference to `build_ged_aml' /usr/bin/ld: hw/i386/acpi-microvm.c:131: undefined reference to `acpi_dsdt_add_power_button' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_virtio': hw/i386/acpi-microvm.c:77: undefined reference to `aml_string' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:138: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:149: undefined reference to `build_header' /usr/bin/ld: hw/i386/acpi-microvm.c:152: undefined reference to `free_aml_allocator' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:202: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:203: undefined reference to `build_fadt' /usr/bin/ld: hw/i386/acpi-microvm.c:206: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:207: undefined reference to `acpi_build_madt' /usr/bin/ld: hw/i386/acpi-microvm.c:212: undefined reference to `build_xsdt' /usr/bin/ld: hw/i386/acpi-microvm.c:224: undefined reference to `build_rsdp' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:251: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:253: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:255: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:258: undefined reference to `acpi_build_tables_cleanup' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_pci': hw/i386/acpi-microvm.c:105: undefined reference to `acpi_dsdt_add_gpex' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. Update the ACPI_HW_REDUCED symbol to select ACPI_MEMORY_HOTPLUG / ACPI_NVDIMM / ACPI. Fixes: 8045df14bcc ("microvm/acpi: add minimal acpi support") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210616204328.2611406-23-philmd@redhat.com>
2021-05-21 15:53:57 +02:00
bool
select ACPI
select ACPI_MEMORY_HOTPLUG
select ACPI_NVDIMM
config ACPI_ERST
bool
default y
depends on ACPI && PCI
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 16:40:49 +02:00
config ACPI_CXL
bool
depends on ACPI