qemu-e2k/hw/misc/npcm7xx_clk.c

295 lines
8.8 KiB
C
Raw Normal View History

/*
* Nuvoton NPCM7xx Clock Control Registers.
*
* Copyright 2020 Google LLC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include "qemu/osdep.h"
#include "hw/misc/npcm7xx_clk.h"
#include "hw/timer/npcm7xx_timer.h"
#include "migration/vmstate.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qemu/timer.h"
#include "qemu/units.h"
#include "trace.h"
#include "sysemu/watchdog.h"
#define PLLCON_LOKI BIT(31)
#define PLLCON_LOKS BIT(30)
#define PLLCON_PWDEN BIT(12)
enum NPCM7xxCLKRegisters {
NPCM7XX_CLK_CLKEN1,
NPCM7XX_CLK_CLKSEL,
NPCM7XX_CLK_CLKDIV1,
NPCM7XX_CLK_PLLCON0,
NPCM7XX_CLK_PLLCON1,
NPCM7XX_CLK_SWRSTR,
NPCM7XX_CLK_IPSRST1 = 0x20 / sizeof(uint32_t),
NPCM7XX_CLK_IPSRST2,
NPCM7XX_CLK_CLKEN2,
NPCM7XX_CLK_CLKDIV2,
NPCM7XX_CLK_CLKEN3,
NPCM7XX_CLK_IPSRST3,
NPCM7XX_CLK_WD0RCR,
NPCM7XX_CLK_WD1RCR,
NPCM7XX_CLK_WD2RCR,
NPCM7XX_CLK_SWRSTC1,
NPCM7XX_CLK_SWRSTC2,
NPCM7XX_CLK_SWRSTC3,
NPCM7XX_CLK_SWRSTC4,
NPCM7XX_CLK_PLLCON2,
NPCM7XX_CLK_CLKDIV3,
NPCM7XX_CLK_CORSTC,
NPCM7XX_CLK_PLLCONG,
NPCM7XX_CLK_AHBCKFI,
NPCM7XX_CLK_SECCNT,
NPCM7XX_CLK_CNTR25M,
NPCM7XX_CLK_REGS_END,
};
/*
* These reset values were taken from version 0.91 of the NPCM750R data sheet.
*
* All are loaded on power-up reset. CLKENx and SWRSTR should also be loaded on
* core domain reset, but this reset type is not yet supported by QEMU.
*/
static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
[NPCM7XX_CLK_CLKEN1] = 0xffffffff,
[NPCM7XX_CLK_CLKSEL] = 0x004aaaaa,
[NPCM7XX_CLK_CLKDIV1] = 0x5413f855,
[NPCM7XX_CLK_PLLCON0] = 0x00222101 | PLLCON_LOKI,
[NPCM7XX_CLK_PLLCON1] = 0x00202101 | PLLCON_LOKI,
[NPCM7XX_CLK_IPSRST1] = 0x00001000,
[NPCM7XX_CLK_IPSRST2] = 0x80000000,
[NPCM7XX_CLK_CLKEN2] = 0xffffffff,
[NPCM7XX_CLK_CLKDIV2] = 0xaa4f8f9f,
[NPCM7XX_CLK_CLKEN3] = 0xffffffff,
[NPCM7XX_CLK_IPSRST3] = 0x03000000,
[NPCM7XX_CLK_WD0RCR] = 0xffffffff,
[NPCM7XX_CLK_WD1RCR] = 0xffffffff,
[NPCM7XX_CLK_WD2RCR] = 0xffffffff,
[NPCM7XX_CLK_SWRSTC1] = 0x00000003,
[NPCM7XX_CLK_PLLCON2] = 0x00c02105 | PLLCON_LOKI,
[NPCM7XX_CLK_CORSTC] = 0x04000003,
[NPCM7XX_CLK_PLLCONG] = 0x01228606 | PLLCON_LOKI,
[NPCM7XX_CLK_AHBCKFI] = 0x000000c8,
};
/* Register Field Definitions */
#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */
/* The number of watchdogs that can trigger a reset. */
#define NPCM7XX_NR_WATCHDOGS (3)
static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
{
uint32_t reg = offset / sizeof(uint32_t);
NPCM7xxCLKState *s = opaque;
int64_t now_ns;
uint32_t value = 0;
if (reg >= NPCM7XX_CLK_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: offset 0x%04" HWADDR_PRIx " out of range\n",
__func__, offset);
return 0;
}
switch (reg) {
case NPCM7XX_CLK_SWRSTR:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: register @ 0x%04" HWADDR_PRIx " is write-only\n",
__func__, offset);
break;
case NPCM7XX_CLK_SECCNT:
now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
value = (now_ns - s->ref_ns) / NANOSECONDS_PER_SECOND;
break;
case NPCM7XX_CLK_CNTR25M:
now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
/*
* This register counts 25 MHz cycles, updating every 640 ns. It rolls
* over to zero every second.
*
* The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
*/
value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
break;
default:
value = s->regs[reg];
break;
};
trace_npcm7xx_clk_read(offset, value);
return value;
}
static void npcm7xx_clk_write(void *opaque, hwaddr offset,
uint64_t v, unsigned size)
{
uint32_t reg = offset / sizeof(uint32_t);
NPCM7xxCLKState *s = opaque;
uint32_t value = v;
trace_npcm7xx_clk_write(offset, value);
if (reg >= NPCM7XX_CLK_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: offset 0x%04" HWADDR_PRIx " out of range\n",
__func__, offset);
return;
}
switch (reg) {
case NPCM7XX_CLK_SWRSTR:
qemu_log_mask(LOG_UNIMP, "%s: SW reset not implemented: 0x%02x\n",
__func__, value);
value = 0;
break;
case NPCM7XX_CLK_PLLCON0:
case NPCM7XX_CLK_PLLCON1:
case NPCM7XX_CLK_PLLCON2:
case NPCM7XX_CLK_PLLCONG:
if (value & PLLCON_PWDEN) {
/* Power down -- clear lock and indicate loss of lock */
value &= ~PLLCON_LOKI;
value |= PLLCON_LOKS;
} else {
/* Normal mode -- assume always locked */
value |= PLLCON_LOKI;
/* Keep LOKS unchanged unless cleared by writing 1 */
if (value & PLLCON_LOKS) {
value &= ~PLLCON_LOKS;
} else {
value |= (value & PLLCON_LOKS);
}
}
break;
case NPCM7XX_CLK_CNTR25M:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
__func__, offset);
return;
}
s->regs[reg] = value;
}
/* Perform reset action triggered by a watchdog */
static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n,
int level)
{
NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque);
uint32_t rcr;
g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS);
rcr = clk->regs[NPCM7XX_CLK_WD0RCR + n];
if (rcr & NPCM7XX_CLK_WDRCR_CA9C) {
watchdog_perform_action();
} else {
qemu_log_mask(LOG_UNIMP,
"%s: only CPU reset is implemented. (requested 0x%" PRIx32")\n",
__func__, rcr);
}
}
static const struct MemoryRegionOps npcm7xx_clk_ops = {
.read = npcm7xx_clk_read,
.write = npcm7xx_clk_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
.unaligned = false,
},
};
static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
{
NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values));
switch (type) {
case RESET_TYPE_COLD:
memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
return;
}
/*
* A small number of registers need to be reset on a core domain reset,
* but no such reset type exists yet.
*/
qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.",
__func__, type);
}
static void npcm7xx_clk_init(Object *obj)
{
NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
TYPE_NPCM7XX_CLK, 4 * KiB);
sysbus_init_mmio(&s->parent, &s->iomem);
qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
}
static const VMStateDescription vmstate_npcm7xx_clk = {
.name = "npcm7xx-clk",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
VMSTATE_END_OF_LIST(),
},
};
static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
{
ResettableClass *rc = RESETTABLE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM7XX_CLK_NR_REGS);
dc->desc = "NPCM7xx Clock Control Registers";
dc->vmsd = &vmstate_npcm7xx_clk;
rc->phases.enter = npcm7xx_clk_enter_reset;
}
static const TypeInfo npcm7xx_clk_info = {
.name = TYPE_NPCM7XX_CLK,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(NPCM7xxCLKState),
.instance_init = npcm7xx_clk_init,
.class_init = npcm7xx_clk_class_init,
};
static void npcm7xx_clk_register_type(void)
{
type_register_static(&npcm7xx_clk_info);
}
type_init(npcm7xx_clk_register_type);