qemu-e2k/linux-user/socket.h

336 lines
12 KiB
C
Raw Normal View History

#if defined(TARGET_MIPS)
/* MIPS special values for constants */
/*
* For setsockopt(2)
*
* This defines are ABI conformant as far as Linux supports these ...
*/
#define TARGET_SOL_SOCKET 0xffff
#define TARGET_SO_DEBUG 0x0001 /* Record debugging information. */
#define TARGET_SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
#define TARGET_SO_KEEPALIVE 0x0008 /* Keep connections alive and send
SIGPIPE when they die. */
#define TARGET_SO_DONTROUTE 0x0010 /* Don't do local routing. */
#define TARGET_SO_BROADCAST 0x0020 /* Allow transmission of
broadcast messages. */
#define TARGET_SO_LINGER 0x0080 /* Block on close of a reliable
* socket to transmit pending data.
*/
#define TARGET_SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band.
*/
#if 0
/* To add: Allow local address and port reuse. */
#define TARGET_SO_REUSEPORT 0x0200
#endif
#define TARGET_SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */
#define TARGET_SO_STYLE SO_TYPE /* Synonym */
#define TARGET_SO_ERROR 0x1007 /* get error status and clear */
#define TARGET_SO_SNDBUF 0x1001 /* Send buffer size. */
#define TARGET_SO_RCVBUF 0x1002 /* Receive buffer. */
#define TARGET_SO_SNDLOWAT 0x1003 /* send low-water mark */
#define TARGET_SO_RCVLOWAT 0x1004 /* receive low-water mark */
#define TARGET_SO_SNDTIMEO 0x1005 /* send timeout */
#define TARGET_SO_RCVTIMEO 0x1006 /* receive timeout */
#define TARGET_SO_ACCEPTCONN 0x1009
/* linux-specific, might as well be the same as on i386 */
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_BSDCOMPAT 14
#define TARGET_SO_PASSCRED 17
#define TARGET_SO_PEERCRED 18
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 22
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define SCM_TIMESTAMP SO_TIMESTAMP
#define TARGET_SO_PEERSEC 30
#define TARGET_SO_SNDBUFFORCE 31
#define TARGET_SO_RCVBUFFORCE 33
/** sock_type - Socket types
*
* Please notice that for binary compat reasons MIPS has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_DGRAM = 1,
TARGET_SOCK_STREAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 02000000,
TARGET_SOCK_NONBLOCK = 0200,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#elif defined(TARGET_ALPHA)
/* For setsockopt(2) */
#define TARGET_SOL_SOCKET 0xffff
#define TARGET_SO_DEBUG 0x0001
#define TARGET_SO_REUSEADDR 0x0004
#define TARGET_SO_KEEPALIVE 0x0008
#define TARGET_SO_DONTROUTE 0x0010
#define TARGET_SO_BROADCAST 0x0020
#define TARGET_SO_LINGER 0x0080
#define TARGET_SO_OOBINLINE 0x0100
/* To add :#define TARGET_SO_REUSEPORT 0x0200 */
#define TARGET_SO_TYPE 0x1008
#define TARGET_SO_ERROR 0x1007
#define TARGET_SO_SNDBUF 0x1001
#define TARGET_SO_RCVBUF 0x1002
#define TARGET_SO_SNDBUFFORCE 0x100a
#define TARGET_SO_RCVBUFFORCE 0x100b
#define TARGET_SO_RCVLOWAT 0x1010
#define TARGET_SO_SNDLOWAT 0x1011
#define TARGET_SO_RCVTIMEO 0x1012
#define TARGET_SO_SNDTIMEO 0x1013
#define TARGET_SO_ACCEPTCONN 0x1014
#define TARGET_SO_PROTOCOL 0x1028
#define TARGET_SO_DOMAIN 0x1029
/* linux-specific, might as well be the same as on i386 */
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_BSDCOMPAT 14
#define TARGET_SO_PASSCRED 17
#define TARGET_SO_PEERCRED 18
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP
#define TARGET_SO_PEERSEC 30
#define TARGET_SO_PASSSEC 34
#define TARGET_SO_TIMESTAMPNS 35
#define TARGET_SCM_TIMESTAMPNS TARGET_SO_TIMESTAMPNS
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 19
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 20
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 21
#define TARGET_SO_MARK 36
#define TARGET_SO_TIMESTAMPING 37
#define TARGET_SCM_TIMESTAMPING TARGET_SO_TIMESTAMPING
#define TARGET_SO_RXQ_OVFL 40
#define TARGET_SO_WIFI_STATUS 41
#define TARGET_SCM_WIFI_STATUS TARGET_SO_WIFI_STATUS
#define TARGET_SO_PEEK_OFF 42
/* Instruct lower device to use last 4-bytes of skb data as FCS */
#define TARGET_SO_NOFCS 43
/** sock_type - Socket types
*
* Please notice that for binary compat reasons ALPHA has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 010000000,
TARGET_SOCK_NONBLOCK = 010000000000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#else
#if defined(TARGET_SPARC)
/** sock_type - Socket types
*
* Please notice that for binary compat reasons SPARC has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 020000000,
TARGET_SOCK_NONBLOCK = 040000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#endif
/* For setsockopt(2) */
#define TARGET_SOL_SOCKET 1
#define TARGET_SO_DEBUG 1
#define TARGET_SO_REUSEADDR 2
#define TARGET_SO_TYPE 3
#define TARGET_SO_ERROR 4
#define TARGET_SO_DONTROUTE 5
#define TARGET_SO_BROADCAST 6
#define TARGET_SO_SNDBUF 7
#define TARGET_SO_RCVBUF 8
#define TARGET_SO_SNDBUFFORCE 32
#define TARGET_SO_RCVBUFFORCE 33
#define TARGET_SO_KEEPALIVE 9
#define TARGET_SO_OOBINLINE 10
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_LINGER 13
#define TARGET_SO_BSDCOMPAT 14
/* To add :#define TARGET_SO_REUSEPORT 15 */
#if defined(TARGET_PPC)
#define TARGET_SO_RCVLOWAT 16
#define TARGET_SO_SNDLOWAT 17
#define TARGET_SO_RCVTIMEO 18
#define TARGET_SO_SNDTIMEO 19
#define TARGET_SO_PASSCRED 20
#define TARGET_SO_PEERCRED 21
#else
#define TARGET_SO_PASSCRED 16
#define TARGET_SO_PEERCRED 17
#define TARGET_SO_RCVLOWAT 18
#define TARGET_SO_SNDLOWAT 19
#define TARGET_SO_RCVTIMEO 20
#define TARGET_SO_SNDTIMEO 21
#endif
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 22
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP
#define TARGET_SO_ACCEPTCONN 30
#define TARGET_SO_PEERSEC 31
#endif
#ifndef ARCH_HAS_SOCKET_TYPES
/** sock_type - Socket types - default values
*
*
* @SOCK_STREAM - stream (connection) socket
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 02000000,
TARGET_SOCK_NONBLOCK = 04000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#endif