qemu-e2k/hw/virtio/virtio-mem.c

980 lines
32 KiB
C
Raw Normal View History

virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
/*
* Virtio MEM device
*
* Copyright (C) 2020 Red Hat, Inc.
*
* Authors:
* David Hildenbrand <david@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/iov.h"
#include "qemu/cutils.h"
#include "qemu/error-report.h"
#include "qemu/units.h"
#include "sysemu/numa.h"
#include "sysemu/sysemu.h"
#include "sysemu/reset.h"
#include "hw/virtio/virtio.h"
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
#include "hw/virtio/virtio-mem.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "exec/ram_addr.h"
#include "migration/misc.h"
#include "hw/boards.h"
#include "hw/qdev-properties.h"
#include CONFIG_DEVICES
#include "trace.h"
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
/*
* Let's not allow blocks smaller than 1 MiB, for example, to keep the tracking
* bitmap small.
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
*/
#define VIRTIO_MEM_MIN_BLOCK_SIZE ((uint32_t)(1 * MiB))
#if defined(__x86_64__) || defined(__arm__) || defined(__aarch64__) || \
defined(__powerpc64__)
#define VIRTIO_MEM_DEFAULT_THP_SIZE ((uint32_t)(2 * MiB))
#else
/* fallback to 1 MiB (e.g., the THP size on s390x) */
#define VIRTIO_MEM_DEFAULT_THP_SIZE VIRTIO_MEM_MIN_BLOCK_SIZE
#endif
/*
* We want to have a reasonable default block size such that
* 1. We avoid splitting THPs when unplugging memory, which degrades
* performance.
* 2. We avoid placing THPs for plugged blocks that also cover unplugged
* blocks.
*
* The actual THP size might differ between Linux kernels, so we try to probe
* it. In the future (if we ever run into issues regarding 2.), we might want
* to disable THP in case we fail to properly probe the THP size, or if the
* block size is configured smaller than the THP size.
*/
static uint32_t thp_size;
#define HPAGE_PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
static uint32_t virtio_mem_thp_size(void)
{
gchar *content = NULL;
const char *endptr;
uint64_t tmp;
if (thp_size) {
return thp_size;
}
/*
* Try to probe the actual THP size, fallback to (sane but eventually
* incorrect) default sizes.
*/
if (g_file_get_contents(HPAGE_PMD_SIZE_PATH, &content, NULL, NULL) &&
!qemu_strtou64(content, &endptr, 0, &tmp) &&
(!endptr || *endptr == '\n')) {
/*
* Sanity-check the value, if it's too big (e.g., aarch64 with 64k base
* pages) or weird, fallback to something smaller.
*/
if (!tmp || !is_power_of_2(tmp) || tmp > 16 * MiB) {
warn_report("Read unsupported THP size: %" PRIx64, tmp);
} else {
thp_size = tmp;
}
}
if (!thp_size) {
thp_size = VIRTIO_MEM_DEFAULT_THP_SIZE;
warn_report("Could not detect THP size, falling back to %" PRIx64
" MiB.", thp_size / MiB);
}
g_free(content);
return thp_size;
}
static uint64_t virtio_mem_default_block_size(RAMBlock *rb)
{
const uint64_t page_size = qemu_ram_pagesize(rb);
/* We can have hugetlbfs with a page size smaller than the THP size. */
if (page_size == qemu_real_host_page_size) {
return MAX(page_size, virtio_mem_thp_size());
}
return MAX(page_size, VIRTIO_MEM_MIN_BLOCK_SIZE);
}
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
/*
* Size the usable region bigger than the requested size if possible. Esp.
* Linux guests will only add (aligned) memory blocks in case they fully
* fit into the usable region, but plug+online only a subset of the pages.
* The memory block size corresponds mostly to the section size.
*
* This allows e.g., to add 20MB with a section size of 128MB on x86_64, and
* a section size of 1GB on arm64 (as long as the start address is properly
* aligned, similar to ordinary DIMMs).
*
* We can change this at any time and maybe even make it configurable if
* necessary (as the section size can change). But it's more likely that the
* section size will rather get smaller and not bigger over time.
*/
#if defined(TARGET_X86_64) || defined(TARGET_I386)
#define VIRTIO_MEM_USABLE_EXTENT (2 * (128 * MiB))
#else
#error VIRTIO_MEM_USABLE_EXTENT not defined
#endif
static bool virtio_mem_is_busy(void)
{
/*
* Postcopy cannot handle concurrent discards and we don't want to migrate
* pages on-demand with stale content when plugging new blocks.
*
* For precopy, we don't want unplugged blocks in our migration stream, and
* when plugging new blocks, the page content might differ between source
* and destination (observable by the guest when not initializing pages
* after plugging them) until we're running on the destination (as we didn't
* migrate these blocks when they were unplugged).
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
*/
return migration_in_incoming_postcopy() || !migration_is_idle();
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
}
static bool virtio_mem_test_bitmap(VirtIOMEM *vmem, uint64_t start_gpa,
uint64_t size, bool plugged)
{
const unsigned long first_bit = (start_gpa - vmem->addr) / vmem->block_size;
const unsigned long last_bit = first_bit + (size / vmem->block_size) - 1;
unsigned long found_bit;
/* We fake a shorter bitmap to avoid searching too far. */
if (plugged) {
found_bit = find_next_zero_bit(vmem->bitmap, last_bit + 1, first_bit);
} else {
found_bit = find_next_bit(vmem->bitmap, last_bit + 1, first_bit);
}
return found_bit > last_bit;
}
static void virtio_mem_set_bitmap(VirtIOMEM *vmem, uint64_t start_gpa,
uint64_t size, bool plugged)
{
const unsigned long bit = (start_gpa - vmem->addr) / vmem->block_size;
const unsigned long nbits = size / vmem->block_size;
if (plugged) {
bitmap_set(vmem->bitmap, bit, nbits);
} else {
bitmap_clear(vmem->bitmap, bit, nbits);
}
}
static void virtio_mem_send_response(VirtIOMEM *vmem, VirtQueueElement *elem,
struct virtio_mem_resp *resp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(vmem);
VirtQueue *vq = vmem->vq;
trace_virtio_mem_send_response(le16_to_cpu(resp->type));
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
iov_from_buf(elem->in_sg, elem->in_num, 0, resp, sizeof(*resp));
virtqueue_push(vq, elem, sizeof(*resp));
virtio_notify(vdev, vq);
}
static void virtio_mem_send_response_simple(VirtIOMEM *vmem,
VirtQueueElement *elem,
uint16_t type)
{
struct virtio_mem_resp resp = {
.type = cpu_to_le16(type),
};
virtio_mem_send_response(vmem, elem, &resp);
}
static bool virtio_mem_valid_range(VirtIOMEM *vmem, uint64_t gpa, uint64_t size)
{
if (!QEMU_IS_ALIGNED(gpa, vmem->block_size)) {
return false;
}
if (gpa + size < gpa || !size) {
return false;
}
if (gpa < vmem->addr || gpa >= vmem->addr + vmem->usable_region_size) {
return false;
}
if (gpa + size > vmem->addr + vmem->usable_region_size) {
return false;
}
return true;
}
static int virtio_mem_set_block_state(VirtIOMEM *vmem, uint64_t start_gpa,
uint64_t size, bool plug)
{
const uint64_t offset = start_gpa - vmem->addr;
int ret;
if (virtio_mem_is_busy()) {
return -EBUSY;
}
if (!plug) {
ret = ram_block_discard_range(vmem->memdev->mr.ram_block, offset, size);
if (ret) {
error_report("Unexpected error discarding RAM: %s",
strerror(-ret));
return -EBUSY;
}
}
virtio_mem_set_bitmap(vmem, start_gpa, size, plug);
return 0;
}
static int virtio_mem_state_change_request(VirtIOMEM *vmem, uint64_t gpa,
uint16_t nb_blocks, bool plug)
{
const uint64_t size = nb_blocks * vmem->block_size;
int ret;
if (!virtio_mem_valid_range(vmem, gpa, size)) {
return VIRTIO_MEM_RESP_ERROR;
}
if (plug && (vmem->size + size > vmem->requested_size)) {
return VIRTIO_MEM_RESP_NACK;
}
/* test if really all blocks are in the opposite state */
if (!virtio_mem_test_bitmap(vmem, gpa, size, !plug)) {
return VIRTIO_MEM_RESP_ERROR;
}
ret = virtio_mem_set_block_state(vmem, gpa, size, plug);
if (ret) {
return VIRTIO_MEM_RESP_BUSY;
}
if (plug) {
vmem->size += size;
} else {
vmem->size -= size;
}
notifier_list_notify(&vmem->size_change_notifiers, &vmem->size);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
return VIRTIO_MEM_RESP_ACK;
}
static void virtio_mem_plug_request(VirtIOMEM *vmem, VirtQueueElement *elem,
struct virtio_mem_req *req)
{
const uint64_t gpa = le64_to_cpu(req->u.plug.addr);
const uint16_t nb_blocks = le16_to_cpu(req->u.plug.nb_blocks);
uint16_t type;
trace_virtio_mem_plug_request(gpa, nb_blocks);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
type = virtio_mem_state_change_request(vmem, gpa, nb_blocks, true);
virtio_mem_send_response_simple(vmem, elem, type);
}
static void virtio_mem_unplug_request(VirtIOMEM *vmem, VirtQueueElement *elem,
struct virtio_mem_req *req)
{
const uint64_t gpa = le64_to_cpu(req->u.unplug.addr);
const uint16_t nb_blocks = le16_to_cpu(req->u.unplug.nb_blocks);
uint16_t type;
trace_virtio_mem_unplug_request(gpa, nb_blocks);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
type = virtio_mem_state_change_request(vmem, gpa, nb_blocks, false);
virtio_mem_send_response_simple(vmem, elem, type);
}
static void virtio_mem_resize_usable_region(VirtIOMEM *vmem,
uint64_t requested_size,
bool can_shrink)
{
uint64_t newsize = MIN(memory_region_size(&vmem->memdev->mr),
requested_size + VIRTIO_MEM_USABLE_EXTENT);
/* The usable region size always has to be multiples of the block size. */
newsize = QEMU_ALIGN_UP(newsize, vmem->block_size);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
if (!requested_size) {
newsize = 0;
}
if (newsize < vmem->usable_region_size && !can_shrink) {
return;
}
trace_virtio_mem_resized_usable_region(vmem->usable_region_size, newsize);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
vmem->usable_region_size = newsize;
}
static int virtio_mem_unplug_all(VirtIOMEM *vmem)
{
RAMBlock *rb = vmem->memdev->mr.ram_block;
int ret;
if (virtio_mem_is_busy()) {
return -EBUSY;
}
ret = ram_block_discard_range(rb, 0, qemu_ram_get_used_length(rb));
if (ret) {
error_report("Unexpected error discarding RAM: %s", strerror(-ret));
return -EBUSY;
}
bitmap_clear(vmem->bitmap, 0, vmem->bitmap_size);
if (vmem->size) {
vmem->size = 0;
notifier_list_notify(&vmem->size_change_notifiers, &vmem->size);
}
trace_virtio_mem_unplugged_all();
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
virtio_mem_resize_usable_region(vmem, vmem->requested_size, true);
return 0;
}
static void virtio_mem_unplug_all_request(VirtIOMEM *vmem,
VirtQueueElement *elem)
{
trace_virtio_mem_unplug_all_request();
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
if (virtio_mem_unplug_all(vmem)) {
virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_BUSY);
} else {
virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_ACK);
}
}
static void virtio_mem_state_request(VirtIOMEM *vmem, VirtQueueElement *elem,
struct virtio_mem_req *req)
{
const uint16_t nb_blocks = le16_to_cpu(req->u.state.nb_blocks);
const uint64_t gpa = le64_to_cpu(req->u.state.addr);
const uint64_t size = nb_blocks * vmem->block_size;
struct virtio_mem_resp resp = {
.type = cpu_to_le16(VIRTIO_MEM_RESP_ACK),
};
trace_virtio_mem_state_request(gpa, nb_blocks);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
if (!virtio_mem_valid_range(vmem, gpa, size)) {
virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_ERROR);
return;
}
if (virtio_mem_test_bitmap(vmem, gpa, size, true)) {
resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_PLUGGED);
} else if (virtio_mem_test_bitmap(vmem, gpa, size, false)) {
resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_UNPLUGGED);
} else {
resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_MIXED);
}
trace_virtio_mem_state_response(le16_to_cpu(resp.u.state.state));
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
virtio_mem_send_response(vmem, elem, &resp);
}
static void virtio_mem_handle_request(VirtIODevice *vdev, VirtQueue *vq)
{
const int len = sizeof(struct virtio_mem_req);
VirtIOMEM *vmem = VIRTIO_MEM(vdev);
VirtQueueElement *elem;
struct virtio_mem_req req;
uint16_t type;
while (true) {
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
return;
}
if (iov_to_buf(elem->out_sg, elem->out_num, 0, &req, len) < len) {
virtio_error(vdev, "virtio-mem protocol violation: invalid request"
" size: %d", len);
virtqueue_detach_element(vq, elem, 0);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
g_free(elem);
return;
}
if (iov_size(elem->in_sg, elem->in_num) <
sizeof(struct virtio_mem_resp)) {
virtio_error(vdev, "virtio-mem protocol violation: not enough space"
" for response: %zu",
iov_size(elem->in_sg, elem->in_num));
virtqueue_detach_element(vq, elem, 0);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
g_free(elem);
return;
}
type = le16_to_cpu(req.type);
switch (type) {
case VIRTIO_MEM_REQ_PLUG:
virtio_mem_plug_request(vmem, elem, &req);
break;
case VIRTIO_MEM_REQ_UNPLUG:
virtio_mem_unplug_request(vmem, elem, &req);
break;
case VIRTIO_MEM_REQ_UNPLUG_ALL:
virtio_mem_unplug_all_request(vmem, elem);
break;
case VIRTIO_MEM_REQ_STATE:
virtio_mem_state_request(vmem, elem, &req);
break;
default:
virtio_error(vdev, "virtio-mem protocol violation: unknown request"
" type: %d", type);
virtqueue_detach_element(vq, elem, 0);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
g_free(elem);
return;
}
g_free(elem);
}
}
static void virtio_mem_get_config(VirtIODevice *vdev, uint8_t *config_data)
{
VirtIOMEM *vmem = VIRTIO_MEM(vdev);
struct virtio_mem_config *config = (void *) config_data;
config->block_size = cpu_to_le64(vmem->block_size);
config->node_id = cpu_to_le16(vmem->node);
config->requested_size = cpu_to_le64(vmem->requested_size);
config->plugged_size = cpu_to_le64(vmem->size);
config->addr = cpu_to_le64(vmem->addr);
config->region_size = cpu_to_le64(memory_region_size(&vmem->memdev->mr));
config->usable_region_size = cpu_to_le64(vmem->usable_region_size);
}
static uint64_t virtio_mem_get_features(VirtIODevice *vdev, uint64_t features,
Error **errp)
{
MachineState *ms = MACHINE(qdev_get_machine());
if (ms->numa_state) {
#if defined(CONFIG_ACPI)
virtio_add_feature(&features, VIRTIO_MEM_F_ACPI_PXM);
#endif
}
return features;
}
static void virtio_mem_system_reset(void *opaque)
{
VirtIOMEM *vmem = VIRTIO_MEM(opaque);
/*
* During usual resets, we will unplug all memory and shrink the usable
* region size. This is, however, not possible in all scenarios. Then,
* the guest has to deal with this manually (VIRTIO_MEM_REQ_UNPLUG_ALL).
*/
virtio_mem_unplug_all(vmem);
}
static void virtio_mem_device_realize(DeviceState *dev, Error **errp)
{
MachineState *ms = MACHINE(qdev_get_machine());
int nb_numa_nodes = ms->numa_state ? ms->numa_state->num_nodes : 0;
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOMEM *vmem = VIRTIO_MEM(dev);
uint64_t page_size;
RAMBlock *rb;
int ret;
if (!vmem->memdev) {
error_setg(errp, "'%s' property is not set", VIRTIO_MEM_MEMDEV_PROP);
return;
} else if (host_memory_backend_is_mapped(vmem->memdev)) {
error_setg(errp, "'%s' property specifies a busy memdev: %s",
VIRTIO_MEM_MEMDEV_PROP,
object_get_canonical_path_component(OBJECT(vmem->memdev)));
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
return;
} else if (!memory_region_is_ram(&vmem->memdev->mr) ||
memory_region_is_rom(&vmem->memdev->mr) ||
!vmem->memdev->mr.ram_block) {
error_setg(errp, "'%s' property specifies an unsupported memdev",
VIRTIO_MEM_MEMDEV_PROP);
return;
}
if ((nb_numa_nodes && vmem->node >= nb_numa_nodes) ||
(!nb_numa_nodes && vmem->node)) {
error_setg(errp, "'%s' property has value '%" PRIu32 "', which exceeds"
"the number of numa nodes: %d", VIRTIO_MEM_NODE_PROP,
vmem->node, nb_numa_nodes ? nb_numa_nodes : 1);
return;
}
if (enable_mlock) {
error_setg(errp, "Incompatible with mlock");
return;
}
rb = vmem->memdev->mr.ram_block;
page_size = qemu_ram_pagesize(rb);
/*
* If the block size wasn't configured by the user, use a sane default. This
* allows using hugetlbfs backends of any page size without manual
* intervention.
*/
if (!vmem->block_size) {
vmem->block_size = virtio_mem_default_block_size(rb);
}
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
if (vmem->block_size < page_size) {
error_setg(errp, "'%s' property has to be at least the page size (0x%"
PRIx64 ")", VIRTIO_MEM_BLOCK_SIZE_PROP, page_size);
return;
} else if (vmem->block_size < virtio_mem_default_block_size(rb)) {
warn_report("'%s' property is smaller than the default block size (%"
PRIx64 " MiB)", VIRTIO_MEM_BLOCK_SIZE_PROP,
virtio_mem_default_block_size(rb) / MiB);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
} else if (!QEMU_IS_ALIGNED(vmem->requested_size, vmem->block_size)) {
error_setg(errp, "'%s' property has to be multiples of '%s' (0x%" PRIx64
")", VIRTIO_MEM_REQUESTED_SIZE_PROP,
VIRTIO_MEM_BLOCK_SIZE_PROP, vmem->block_size);
return;
} else if (!QEMU_IS_ALIGNED(vmem->addr, vmem->block_size)) {
error_setg(errp, "'%s' property has to be multiples of '%s' (0x%" PRIx64
")", VIRTIO_MEM_ADDR_PROP, VIRTIO_MEM_BLOCK_SIZE_PROP,
vmem->block_size);
return;
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
} else if (!QEMU_IS_ALIGNED(memory_region_size(&vmem->memdev->mr),
vmem->block_size)) {
error_setg(errp, "'%s' property memdev size has to be multiples of"
"'%s' (0x%" PRIx64 ")", VIRTIO_MEM_MEMDEV_PROP,
VIRTIO_MEM_BLOCK_SIZE_PROP, vmem->block_size);
return;
}
if (ram_block_discard_require(true)) {
error_setg(errp, "Discarding RAM is disabled");
return;
}
ret = ram_block_discard_range(rb, 0, qemu_ram_get_used_length(rb));
if (ret) {
error_setg_errno(errp, -ret, "Unexpected error discarding RAM");
ram_block_discard_require(false);
return;
}
virtio_mem_resize_usable_region(vmem, vmem->requested_size, true);
vmem->bitmap_size = memory_region_size(&vmem->memdev->mr) /
vmem->block_size;
vmem->bitmap = bitmap_new(vmem->bitmap_size);
virtio_init(vdev, TYPE_VIRTIO_MEM, VIRTIO_ID_MEM,
sizeof(struct virtio_mem_config));
vmem->vq = virtio_add_queue(vdev, 128, virtio_mem_handle_request);
host_memory_backend_set_mapped(vmem->memdev, true);
vmstate_register_ram(&vmem->memdev->mr, DEVICE(vmem));
qemu_register_reset(virtio_mem_system_reset, vmem);
precopy_add_notifier(&vmem->precopy_notifier);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
}
static void virtio_mem_device_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOMEM *vmem = VIRTIO_MEM(dev);
precopy_remove_notifier(&vmem->precopy_notifier);
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
qemu_unregister_reset(virtio_mem_system_reset, vmem);
vmstate_unregister_ram(&vmem->memdev->mr, DEVICE(vmem));
host_memory_backend_set_mapped(vmem->memdev, false);
virtio_del_queue(vdev, 0);
virtio_cleanup(vdev);
g_free(vmem->bitmap);
ram_block_discard_require(false);
}
static int virtio_mem_restore_unplugged(VirtIOMEM *vmem)
{
RAMBlock *rb = vmem->memdev->mr.ram_block;
unsigned long first_zero_bit, last_zero_bit;
uint64_t offset, length;
int ret;
/* Find consecutive unplugged blocks and discard the consecutive range. */
first_zero_bit = find_first_zero_bit(vmem->bitmap, vmem->bitmap_size);
while (first_zero_bit < vmem->bitmap_size) {
offset = first_zero_bit * vmem->block_size;
last_zero_bit = find_next_bit(vmem->bitmap, vmem->bitmap_size,
first_zero_bit + 1) - 1;
length = (last_zero_bit - first_zero_bit + 1) * vmem->block_size;
ret = ram_block_discard_range(rb, offset, length);
if (ret) {
error_report("Unexpected error discarding RAM: %s",
strerror(-ret));
return -EINVAL;
}
first_zero_bit = find_next_zero_bit(vmem->bitmap, vmem->bitmap_size,
last_zero_bit + 2);
}
return 0;
}
static int virtio_mem_post_load(void *opaque, int version_id)
{
if (migration_in_incoming_postcopy()) {
return 0;
}
return virtio_mem_restore_unplugged(VIRTIO_MEM(opaque));
}
typedef struct VirtIOMEMMigSanityChecks {
VirtIOMEM *parent;
uint64_t addr;
uint64_t region_size;
uint64_t block_size;
uint32_t node;
} VirtIOMEMMigSanityChecks;
static int virtio_mem_mig_sanity_checks_pre_save(void *opaque)
{
VirtIOMEMMigSanityChecks *tmp = opaque;
VirtIOMEM *vmem = tmp->parent;
tmp->addr = vmem->addr;
tmp->region_size = memory_region_size(&vmem->memdev->mr);
tmp->block_size = vmem->block_size;
tmp->node = vmem->node;
return 0;
}
static int virtio_mem_mig_sanity_checks_post_load(void *opaque, int version_id)
{
VirtIOMEMMigSanityChecks *tmp = opaque;
VirtIOMEM *vmem = tmp->parent;
const uint64_t new_region_size = memory_region_size(&vmem->memdev->mr);
if (tmp->addr != vmem->addr) {
error_report("Property '%s' changed from 0x%" PRIx64 " to 0x%" PRIx64,
VIRTIO_MEM_ADDR_PROP, tmp->addr, vmem->addr);
return -EINVAL;
}
/*
* Note: Preparation for resizeable memory regions. The maximum size
* of the memory region must not change during migration.
*/
if (tmp->region_size != new_region_size) {
error_report("Property '%s' size changed from 0x%" PRIx64 " to 0x%"
PRIx64, VIRTIO_MEM_MEMDEV_PROP, tmp->region_size,
new_region_size);
return -EINVAL;
}
if (tmp->block_size != vmem->block_size) {
error_report("Property '%s' changed from 0x%" PRIx64 " to 0x%" PRIx64,
VIRTIO_MEM_BLOCK_SIZE_PROP, tmp->block_size,
vmem->block_size);
return -EINVAL;
}
if (tmp->node != vmem->node) {
error_report("Property '%s' changed from %" PRIu32 " to %" PRIu32,
VIRTIO_MEM_NODE_PROP, tmp->node, vmem->node);
return -EINVAL;
}
return 0;
}
static const VMStateDescription vmstate_virtio_mem_sanity_checks = {
.name = "virtio-mem-device/sanity-checks",
.pre_save = virtio_mem_mig_sanity_checks_pre_save,
.post_load = virtio_mem_mig_sanity_checks_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT64(addr, VirtIOMEMMigSanityChecks),
VMSTATE_UINT64(region_size, VirtIOMEMMigSanityChecks),
VMSTATE_UINT64(block_size, VirtIOMEMMigSanityChecks),
VMSTATE_UINT32(node, VirtIOMEMMigSanityChecks),
VMSTATE_END_OF_LIST(),
},
};
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
static const VMStateDescription vmstate_virtio_mem_device = {
.name = "virtio-mem-device",
.minimum_version_id = 1,
.version_id = 1,
.post_load = virtio_mem_post_load,
.fields = (VMStateField[]) {
VMSTATE_WITH_TMP(VirtIOMEM, VirtIOMEMMigSanityChecks,
vmstate_virtio_mem_sanity_checks),
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
VMSTATE_UINT64(usable_region_size, VirtIOMEM),
VMSTATE_UINT64(size, VirtIOMEM),
VMSTATE_UINT64(requested_size, VirtIOMEM),
VMSTATE_BITMAP(bitmap, VirtIOMEM, 0, bitmap_size),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_virtio_mem = {
.name = "virtio-mem",
.minimum_version_id = 1,
.version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_VIRTIO_DEVICE,
VMSTATE_END_OF_LIST()
},
};
static void virtio_mem_fill_device_info(const VirtIOMEM *vmem,
VirtioMEMDeviceInfo *vi)
{
vi->memaddr = vmem->addr;
vi->node = vmem->node;
vi->requested_size = vmem->requested_size;
vi->size = vmem->size;
vi->max_size = memory_region_size(&vmem->memdev->mr);
vi->block_size = vmem->block_size;
vi->memdev = object_get_canonical_path(OBJECT(vmem->memdev));
}
static MemoryRegion *virtio_mem_get_memory_region(VirtIOMEM *vmem, Error **errp)
{
if (!vmem->memdev) {
error_setg(errp, "'%s' property must be set", VIRTIO_MEM_MEMDEV_PROP);
return NULL;
}
return &vmem->memdev->mr;
}
static void virtio_mem_add_size_change_notifier(VirtIOMEM *vmem,
Notifier *notifier)
{
notifier_list_add(&vmem->size_change_notifiers, notifier);
}
static void virtio_mem_remove_size_change_notifier(VirtIOMEM *vmem,
Notifier *notifier)
{
notifier_remove(notifier);
}
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
static void virtio_mem_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
const VirtIOMEM *vmem = VIRTIO_MEM(obj);
uint64_t value = vmem->size;
visit_type_size(v, name, &value, errp);
}
static void virtio_mem_get_requested_size(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
const VirtIOMEM *vmem = VIRTIO_MEM(obj);
uint64_t value = vmem->requested_size;
visit_type_size(v, name, &value, errp);
}
static void virtio_mem_set_requested_size(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
VirtIOMEM *vmem = VIRTIO_MEM(obj);
Error *err = NULL;
uint64_t value;
visit_type_size(v, name, &value, &err);
if (err) {
error_propagate(errp, err);
return;
}
/*
* The block size and memory backend are not fixed until the device was
* realized. realize() will verify these properties then.
*/
if (DEVICE(obj)->realized) {
if (!QEMU_IS_ALIGNED(value, vmem->block_size)) {
error_setg(errp, "'%s' has to be multiples of '%s' (0x%" PRIx64
")", name, VIRTIO_MEM_BLOCK_SIZE_PROP,
vmem->block_size);
return;
} else if (value > memory_region_size(&vmem->memdev->mr)) {
error_setg(errp, "'%s' cannot exceed the memory backend size"
"(0x%" PRIx64 ")", name,
memory_region_size(&vmem->memdev->mr));
return;
}
if (value != vmem->requested_size) {
virtio_mem_resize_usable_region(vmem, value, false);
vmem->requested_size = value;
}
/*
* Trigger a config update so the guest gets notified. We trigger
* even if the size didn't change (especially helpful for debugging).
*/
virtio_notify_config(VIRTIO_DEVICE(vmem));
} else {
vmem->requested_size = value;
}
}
static void virtio_mem_get_block_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
const VirtIOMEM *vmem = VIRTIO_MEM(obj);
uint64_t value = vmem->block_size;
/*
* If not configured by the user (and we're not realized yet), use the
* default block size we would use with the current memory backend.
*/
if (!value) {
if (vmem->memdev && memory_region_is_ram(&vmem->memdev->mr)) {
value = virtio_mem_default_block_size(vmem->memdev->mr.ram_block);
} else {
value = virtio_mem_thp_size();
}
}
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
visit_type_size(v, name, &value, errp);
}
static void virtio_mem_set_block_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
VirtIOMEM *vmem = VIRTIO_MEM(obj);
Error *err = NULL;
uint64_t value;
if (DEVICE(obj)->realized) {
error_setg(errp, "'%s' cannot be changed", name);
return;
}
visit_type_size(v, name, &value, &err);
if (err) {
error_propagate(errp, err);
return;
}
if (value < VIRTIO_MEM_MIN_BLOCK_SIZE) {
error_setg(errp, "'%s' property has to be at least 0x%" PRIx32, name,
VIRTIO_MEM_MIN_BLOCK_SIZE);
return;
} else if (!is_power_of_2(value)) {
error_setg(errp, "'%s' property has to be a power of two", name);
return;
}
vmem->block_size = value;
}
static void virtio_mem_precopy_exclude_unplugged(VirtIOMEM *vmem)
{
void * const host = qemu_ram_get_host_addr(vmem->memdev->mr.ram_block);
unsigned long first_zero_bit, last_zero_bit;
uint64_t offset, length;
/*
* Find consecutive unplugged blocks and exclude them from migration.
*
* Note: Blocks cannot get (un)plugged during precopy, no locking needed.
*/
first_zero_bit = find_first_zero_bit(vmem->bitmap, vmem->bitmap_size);
while (first_zero_bit < vmem->bitmap_size) {
offset = first_zero_bit * vmem->block_size;
last_zero_bit = find_next_bit(vmem->bitmap, vmem->bitmap_size,
first_zero_bit + 1) - 1;
length = (last_zero_bit - first_zero_bit + 1) * vmem->block_size;
qemu_guest_free_page_hint(host + offset, length);
first_zero_bit = find_next_zero_bit(vmem->bitmap, vmem->bitmap_size,
last_zero_bit + 2);
}
}
static int virtio_mem_precopy_notify(NotifierWithReturn *n, void *data)
{
VirtIOMEM *vmem = container_of(n, VirtIOMEM, precopy_notifier);
PrecopyNotifyData *pnd = data;
switch (pnd->reason) {
case PRECOPY_NOTIFY_SETUP:
precopy_enable_free_page_optimization();
break;
case PRECOPY_NOTIFY_AFTER_BITMAP_SYNC:
virtio_mem_precopy_exclude_unplugged(vmem);
break;
default:
break;
}
return 0;
}
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
static void virtio_mem_instance_init(Object *obj)
{
VirtIOMEM *vmem = VIRTIO_MEM(obj);
notifier_list_init(&vmem->size_change_notifiers);
vmem->precopy_notifier.notify = virtio_mem_precopy_notify;
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
object_property_add(obj, VIRTIO_MEM_SIZE_PROP, "size", virtio_mem_get_size,
NULL, NULL, NULL);
object_property_add(obj, VIRTIO_MEM_REQUESTED_SIZE_PROP, "size",
virtio_mem_get_requested_size,
virtio_mem_set_requested_size, NULL, NULL);
object_property_add(obj, VIRTIO_MEM_BLOCK_SIZE_PROP, "size",
virtio_mem_get_block_size, virtio_mem_set_block_size,
NULL, NULL);
}
static Property virtio_mem_properties[] = {
DEFINE_PROP_UINT64(VIRTIO_MEM_ADDR_PROP, VirtIOMEM, addr, 0),
DEFINE_PROP_UINT32(VIRTIO_MEM_NODE_PROP, VirtIOMEM, node, 0),
DEFINE_PROP_LINK(VIRTIO_MEM_MEMDEV_PROP, VirtIOMEM, memdev,
TYPE_MEMORY_BACKEND, HostMemoryBackend *),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_mem_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
VirtIOMEMClass *vmc = VIRTIO_MEM_CLASS(klass);
device_class_set_props(dc, virtio_mem_properties);
dc->vmsd = &vmstate_virtio_mem;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
vdc->realize = virtio_mem_device_realize;
vdc->unrealize = virtio_mem_device_unrealize;
vdc->get_config = virtio_mem_get_config;
vdc->get_features = virtio_mem_get_features;
vdc->vmsd = &vmstate_virtio_mem_device;
vmc->fill_device_info = virtio_mem_fill_device_info;
vmc->get_memory_region = virtio_mem_get_memory_region;
vmc->add_size_change_notifier = virtio_mem_add_size_change_notifier;
vmc->remove_size_change_notifier = virtio_mem_remove_size_change_notifier;
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 09:22:37 +02:00
}
static const TypeInfo virtio_mem_info = {
.name = TYPE_VIRTIO_MEM,
.parent = TYPE_VIRTIO_DEVICE,
.instance_size = sizeof(VirtIOMEM),
.instance_init = virtio_mem_instance_init,
.class_init = virtio_mem_class_init,
.class_size = sizeof(VirtIOMEMClass),
};
static void virtio_register_types(void)
{
type_register_static(&virtio_mem_info);
}
type_init(virtio_register_types)