qemu-e2k/hw/core/qdev-properties.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1094 lines
30 KiB
C
Raw Normal View History

#include "qemu/osdep.h"
#include "hw/qdev-properties.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
Include generated QAPI headers less Some of the generated qapi-types-MODULE.h are included all over the place. Changing a QAPI type can trigger massive recompiling. Top scorers recompile more than 1000 out of some 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h): 6300 qapi/qapi-builtin-types.h 5700 qapi/qapi-types-run-state.h 3900 qapi/qapi-types-common.h 3300 qapi/qapi-types-sockets.h 3000 qapi/qapi-types-misc.h 3000 qapi/qapi-types-crypto.h 3000 qapi/qapi-types-job.h 3000 qapi/qapi-types-block-core.h 2800 qapi/qapi-types-block.h 1300 qapi/qapi-types-net.h Clean up headers to include generated QAPI headers only where needed. Impact is negligible except for hw/qdev-properties.h. This header includes qapi/qapi-types-block.h and qapi/qapi-types-misc.h. They are used only in expansions of property definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and DEFINE_PROP_OFF_AUTO(). Moving their inclusion from hw/qdev-properties.h to the users of these macros avoids pointless recompiles. This is how other property definition macros, such as DEFINE_PROP_NETDEV(), already work. Improves things for some of the top scorers: 3600 qapi/qapi-types-common.h 2800 qapi/qapi-types-sockets.h 900 qapi/qapi-types-misc.h 2200 qapi/qapi-types-crypto.h 2100 qapi/qapi-types-job.h 2100 qapi/qapi-types-block-core.h 270 qapi/qapi-types-block.h Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-3-armbru@redhat.com>
2019-08-12 07:23:32 +02:00
#include "qapi/qapi-types-misc.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qmp/qlist.h"
#include "qemu/ctype.h"
#include "qemu/error-report.h"
#include "qapi/visitor.h"
#include "qemu/units.h"
#include "qemu/cutils.h"
#include "qdev-prop-internal.h"
#include "qom/qom-qobject.h"
void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
Error **errp)
{
if (dev->id) {
error_setg(errp, "Attempt to set property '%s' on device '%s' "
"(type '%s') after it was realized", name, dev->id,
object_get_typename(OBJECT(dev)));
} else {
error_setg(errp, "Attempt to set property '%s' on anonymous device "
"(type '%s') after it was realized", name,
object_get_typename(OBJECT(dev)));
}
}
/* returns: true if property is allowed to be set, false otherwise */
static bool qdev_prop_allow_set(Object *obj, const char *name,
const PropertyInfo *info, Error **errp)
{
DeviceState *dev = DEVICE(obj);
if (dev->realized && !info->realized_set_allowed) {
qdev_prop_set_after_realize(dev, name, errp);
return false;
}
return true;
}
void qdev_prop_allow_set_link_before_realize(const Object *obj,
const char *name,
Object *val, Error **errp)
{
DeviceState *dev = DEVICE(obj);
if (dev->realized) {
error_setg(errp, "Attempt to set link property '%s' on device '%s' "
"(type '%s') after it was realized",
name, dev->id, object_get_typename(obj));
}
}
void *object_field_prop_ptr(Object *obj, Property *prop)
{
void *ptr = obj;
ptr += prop->offset;
return ptr;
}
static void field_prop_get(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
return prop->info->get(obj, v, name, opaque, errp);
}
/**
* field_prop_getter: Return getter function to be used for property
*
* Return value can be NULL if @info has no getter function.
*/
static ObjectPropertyAccessor *field_prop_getter(const PropertyInfo *info)
{
return info->get ? field_prop_get : NULL;
}
static void field_prop_set(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
if (!qdev_prop_allow_set(obj, name, prop->info, errp)) {
return;
}
return prop->info->set(obj, v, name, opaque, errp);
}
/**
* field_prop_setter: Return setter function to be used for property
*
* Return value can be NULL if @info has not setter function.
*/
static ObjectPropertyAccessor *field_prop_setter(const PropertyInfo *info)
{
return info->set ? field_prop_set : NULL;
}
void qdev_propinfo_get_enum(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
int *ptr = object_field_prop_ptr(obj, prop);
visit_type_enum(v, name, ptr, prop->info->enum_table, errp);
}
void qdev_propinfo_set_enum(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
int *ptr = object_field_prop_ptr(obj, prop);
visit_type_enum(v, name, ptr, prop->info->enum_table, errp);
}
void qdev_propinfo_set_default_value_enum(ObjectProperty *op,
const Property *prop)
{
object_property_set_default_str(op,
qapi_enum_lookup(prop->info->enum_table, prop->defval.i));
}
const PropertyInfo qdev_prop_enum = {
.name = "enum",
.get = qdev_propinfo_get_enum,
.set = qdev_propinfo_set_enum,
.set_default_value = qdev_propinfo_set_default_value_enum,
};
/* Bit */
static uint32_t qdev_get_prop_mask(Property *prop)
{
assert(prop->info == &qdev_prop_bit);
return 0x1 << prop->bitnr;
}
static void bit_prop_set(Object *obj, Property *props, bool val)
{
uint32_t *p = object_field_prop_ptr(obj, props);
uint32_t mask = qdev_get_prop_mask(props);
if (val) {
*p |= mask;
} else {
*p &= ~mask;
}
}
static void prop_get_bit(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint32_t *p = object_field_prop_ptr(obj, prop);
bool value = (*p & qdev_get_prop_mask(prop)) != 0;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_bool(v, name, &value, errp);
}
static void prop_set_bit(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
bool value;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_bool(v, name, &value, errp)) {
return;
}
bit_prop_set(obj, prop, value);
}
static void set_default_value_bool(ObjectProperty *op, const Property *prop)
{
object_property_set_default_bool(op, prop->defval.u);
}
const PropertyInfo qdev_prop_bit = {
.name = "bool",
.description = "on/off",
.get = prop_get_bit,
.set = prop_set_bit,
.set_default_value = set_default_value_bool,
};
/* Bit64 */
static uint64_t qdev_get_prop_mask64(Property *prop)
{
assert(prop->info == &qdev_prop_bit64);
return 0x1ull << prop->bitnr;
}
static void bit64_prop_set(Object *obj, Property *props, bool val)
{
uint64_t *p = object_field_prop_ptr(obj, props);
uint64_t mask = qdev_get_prop_mask64(props);
if (val) {
*p |= mask;
} else {
*p &= ~mask;
}
}
static void prop_get_bit64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint64_t *p = object_field_prop_ptr(obj, prop);
bool value = (*p & qdev_get_prop_mask64(prop)) != 0;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_bool(v, name, &value, errp);
}
static void prop_set_bit64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
bool value;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_bool(v, name, &value, errp)) {
return;
}
bit64_prop_set(obj, prop, value);
}
const PropertyInfo qdev_prop_bit64 = {
.name = "bool",
.description = "on/off",
.get = prop_get_bit64,
.set = prop_set_bit64,
.set_default_value = set_default_value_bool,
};
/* --- bool --- */
static void get_bool(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
bool *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_bool(v, name, ptr, errp);
}
static void set_bool(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
bool *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_bool(v, name, ptr, errp);
}
const PropertyInfo qdev_prop_bool = {
.name = "bool",
.get = get_bool,
.set = set_bool,
.set_default_value = set_default_value_bool,
};
/* --- 8bit integer --- */
static void get_uint8(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
uint8_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, ptr, errp);
}
static void set_uint8(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
uint8_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint8(v, name, ptr, errp);
}
void qdev_propinfo_set_default_value_int(ObjectProperty *op,
const Property *prop)
{
object_property_set_default_int(op, prop->defval.i);
}
void qdev_propinfo_set_default_value_uint(ObjectProperty *op,
const Property *prop)
{
object_property_set_default_uint(op, prop->defval.u);
}
const PropertyInfo qdev_prop_uint8 = {
.name = "uint8",
.get = get_uint8,
.set = set_uint8,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
/* --- 16bit integer --- */
static void get_uint16(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint16_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint16(v, name, ptr, errp);
}
static void set_uint16(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint16_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint16(v, name, ptr, errp);
}
const PropertyInfo qdev_prop_uint16 = {
.name = "uint16",
.get = get_uint16,
.set = set_uint16,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
/* --- 32bit integer --- */
static void get_uint32(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint32_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, ptr, errp);
}
static void set_uint32(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint32_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, ptr, errp);
}
void qdev_propinfo_get_int32(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
int32_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_int32(v, name, ptr, errp);
}
static void set_int32(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
int32_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_int32(v, name, ptr, errp);
}
const PropertyInfo qdev_prop_uint32 = {
.name = "uint32",
.get = get_uint32,
.set = set_uint32,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
const PropertyInfo qdev_prop_int32 = {
.name = "int32",
.get = qdev_propinfo_get_int32,
.set = set_int32,
.set_default_value = qdev_propinfo_set_default_value_int,
};
/* --- 64bit integer --- */
static void get_uint64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint64_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint64(v, name, ptr, errp);
}
static void set_uint64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint64_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint64(v, name, ptr, errp);
}
static void get_int64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
int64_t *ptr = object_field_prop_ptr(obj, prop);
visit_type_int64(v, name, ptr, errp);
}
static void set_int64(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
int64_t *ptr = object_field_prop_ptr(obj, prop);
visit_type_int64(v, name, ptr, errp);
}
const PropertyInfo qdev_prop_uint64 = {
.name = "uint64",
.get = get_uint64,
.set = set_uint64,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
const PropertyInfo qdev_prop_int64 = {
.name = "int64",
.get = get_int64,
.set = set_int64,
.set_default_value = qdev_propinfo_set_default_value_int,
};
static void set_uint64_checkmask(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint64_t *ptr = object_field_prop_ptr(obj, prop);
visit_type_uint64(v, name, ptr, errp);
if (*ptr & ~prop->bitmask) {
error_setg(errp, "Property value for '%s' has bits outside mask '0x%" PRIx64 "'",
name, prop->bitmask);
}
}
const PropertyInfo qdev_prop_uint64_checkmask = {
.name = "uint64",
.get = get_uint64,
.set = set_uint64_checkmask,
};
/* --- string --- */
static void release_string(Object *obj, const char *name, void *opaque)
{
Property *prop = opaque;
g_free(*(char **)object_field_prop_ptr(obj, prop));
}
static void get_string(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
char **ptr = object_field_prop_ptr(obj, prop);
if (!*ptr) {
char *str = (char *)"";
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_str(v, name, &str, errp);
} else {
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_str(v, name, ptr, errp);
}
}
static void set_string(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
char **ptr = object_field_prop_ptr(obj, prop);
char *str;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_str(v, name, &str, errp)) {
return;
}
g_free(*ptr);
*ptr = str;
}
const PropertyInfo qdev_prop_string = {
.name = "str",
.release = release_string,
.get = get_string,
.set = set_string,
};
/* --- on/off/auto --- */
const PropertyInfo qdev_prop_on_off_auto = {
.name = "OnOffAuto",
.description = "on/off/auto",
.enum_table = &OnOffAuto_lookup,
.get = qdev_propinfo_get_enum,
.set = qdev_propinfo_set_enum,
.set_default_value = qdev_propinfo_set_default_value_enum,
};
/* --- 32bit unsigned int 'size' type --- */
void qdev_propinfo_get_size32(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
uint32_t *ptr = object_field_prop_ptr(obj, prop);
uint64_t value = *ptr;
visit_type_size(v, name, &value, errp);
}
static void set_size32(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
uint32_t *ptr = object_field_prop_ptr(obj, prop);
uint64_t value;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_size(v, name, &value, errp)) {
return;
}
if (value > UINT32_MAX) {
error_setg(errp,
"Property %s.%s doesn't take value %" PRIu64
" (maximum: %u)",
object_get_typename(obj), name, value, UINT32_MAX);
return;
}
*ptr = value;
}
const PropertyInfo qdev_prop_size32 = {
.name = "size",
.get = qdev_propinfo_get_size32,
.set = set_size32,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
/* --- support for array properties --- */
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
typedef struct ArrayElementList ArrayElementList;
struct ArrayElementList {
ArrayElementList *next;
void *value;
};
/*
* Given an array property @parent_prop in @obj, return a Property for a
* specific element of the array. Arrays are backed by an uint32_t length field
* and an element array. @elem points at an element in this element array.
*/
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
static Property array_elem_prop(Object *obj, Property *parent_prop,
const char *name, char *elem)
{
return (Property) {
.info = parent_prop->arrayinfo,
.name = name,
/*
* This ugly piece of pointer arithmetic sets up the offset so
* that when the underlying release hook calls qdev_get_prop_ptr
* they get the right answer despite the array element not actually
* being inside the device struct.
*/
.offset = (uintptr_t)elem - (uintptr_t)obj,
};
}
/*
* Object property release callback for array properties: We call the
* underlying element's property release hook for each element.
*
* Note that it is the responsibility of the individual device's deinit
* to free the array proper.
*/
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
static void release_prop_array(Object *obj, const char *name, void *opaque)
{
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
Property *prop = opaque;
uint32_t *alenptr = object_field_prop_ptr(obj, prop);
void **arrayptr = (void *)obj + prop->arrayoffset;
char *elem = *arrayptr;
int i;
if (!prop->arrayinfo->release) {
return;
}
for (i = 0; i < *alenptr; i++) {
Property elem_prop = array_elem_prop(obj, prop, name, elem);
prop->arrayinfo->release(obj, NULL, &elem_prop);
elem += prop->arrayfieldsize;
}
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
/*
* Setter for an array property. This sets both the array length (which
* is technically the property field in the object) and the array itself
* (a pointer to which is stored in the additional field described by
* prop->arrayoffset).
*/
static void set_prop_array(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
ERRP_GUARD();
Property *prop = opaque;
uint32_t *alenptr = object_field_prop_ptr(obj, prop);
void **arrayptr = (void *)obj + prop->arrayoffset;
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
ArrayElementList *list, *elem, *next;
const size_t size = sizeof(*list);
char *elemptr;
bool ok = true;
if (*alenptr) {
error_setg(errp, "array size property %s may not be set more than once",
name);
return;
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
if (!visit_start_list(v, name, (GenericList **) &list, size, errp)) {
return;
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
/* Read the whole input into a temporary list */
elem = list;
while (elem) {
Property elem_prop;
elem->value = g_malloc0(prop->arrayfieldsize);
elem_prop = array_elem_prop(obj, prop, name, elem->value);
prop->arrayinfo->set(obj, v, NULL, &elem_prop, errp);
if (*errp) {
ok = false;
goto out_obj;
}
if (*alenptr == INT_MAX) {
error_setg(errp, "array is too big");
return;
}
(*alenptr)++;
elem = (ArrayElementList *) visit_next_list(v, (GenericList*) elem,
size);
}
ok = visit_check_list(v, errp);
out_obj:
visit_end_list(v, (void**) &list);
if (!ok) {
for (elem = list; elem; elem = next) {
Property elem_prop = array_elem_prop(obj, prop, name,
elem->value);
if (prop->arrayinfo->release) {
prop->arrayinfo->release(obj, NULL, &elem_prop);
}
next = elem->next;
g_free(elem->value);
g_free(elem);
}
return;
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
/*
* Now that we know how big the array has to be, move the data over to a
* linear array and free the temporary list.
*/
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
*arrayptr = g_malloc_n(*alenptr, prop->arrayfieldsize);
elemptr = *arrayptr;
for (elem = list; elem; elem = next) {
memcpy(elemptr, elem->value, prop->arrayfieldsize);
elemptr += prop->arrayfieldsize;
next = elem->next;
g_free(elem->value);
g_free(elem);
}
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
static void get_prop_array(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ERRP_GUARD();
Property *prop = opaque;
uint32_t *alenptr = object_field_prop_ptr(obj, prop);
void **arrayptr = (void *)obj + prop->arrayoffset;
char *elemptr = *arrayptr;
ArrayElementList *list = NULL, *elem;
ArrayElementList **tail = &list;
const size_t size = sizeof(*list);
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
int i;
bool ok;
/* At least the string output visitor needs a real list */
for (i = 0; i < *alenptr; i++) {
elem = g_new0(ArrayElementList, 1);
elem->value = elemptr;
elemptr += prop->arrayfieldsize;
*tail = elem;
tail = &elem->next;
}
if (!visit_start_list(v, name, (GenericList **) &list, size, errp)) {
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
return;
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
elem = list;
while (elem) {
Property elem_prop = array_elem_prop(obj, prop, name, elem->value);
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
prop->arrayinfo->get(obj, v, NULL, &elem_prop, errp);
if (*errp) {
goto out_obj;
}
elem = (ArrayElementList *) visit_next_list(v, (GenericList*) elem,
size);
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
}
/* visit_check_list() can only fail for input visitors */
ok = visit_check_list(v, errp);
assert(ok);
out_obj:
visit_end_list(v, (void**) &list);
while (list) {
elem = list;
list = elem->next;
g_free(elem);
}
}
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
static void default_prop_array(ObjectProperty *op, const Property *prop)
{
object_property_set_default_list(op);
}
const PropertyInfo qdev_prop_array = {
.name = "list",
.get = get_prop_array,
.set = set_prop_array,
.release = release_prop_array,
.set_default_value = default_prop_array,
};
/* --- public helpers --- */
static Property *qdev_prop_walk(Property *props, const char *name)
{
if (!props) {
return NULL;
}
while (props->name) {
if (strcmp(props->name, name) == 0) {
return props;
}
props++;
}
return NULL;
}
static Property *qdev_prop_find(DeviceState *dev, const char *name)
{
ObjectClass *class;
Property *prop;
/* device properties */
class = object_get_class(OBJECT(dev));
do {
prop = qdev_prop_walk(DEVICE_CLASS(class)->props_, name);
if (prop) {
return prop;
}
class = object_class_get_parent(class);
} while (class != object_class_by_name(TYPE_DEVICE));
return NULL;
}
void error_set_from_qdev_prop_error(Error **errp, int ret, Object *obj,
const char *name, const char *value)
{
switch (ret) {
case -EEXIST:
error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use",
object_get_typename(obj), name, value);
break;
default:
case -EINVAL:
error_setg(errp, QERR_PROPERTY_VALUE_BAD,
object_get_typename(obj), name, value);
break;
case -ENOENT:
error_setg(errp, "Property '%s.%s' can't find value '%s'",
object_get_typename(obj), name, value);
break;
case 0:
break;
}
}
void qdev_prop_set_bit(DeviceState *dev, const char *name, bool value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_bool(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_uint8(DeviceState *dev, const char *name, uint8_t value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_uint16(DeviceState *dev, const char *name, uint16_t value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_uint32(DeviceState *dev, const char *name, uint32_t value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_int32(DeviceState *dev, const char *name, int32_t value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_uint64(DeviceState *dev, const char *name, uint64_t value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_int(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_string(DeviceState *dev, const char *name, const char *value)
{
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_str(OBJECT(dev), name, value, &error_abort);
}
void qdev_prop_set_enum(DeviceState *dev, const char *name, int value)
{
Property *prop;
prop = qdev_prop_find(dev, name);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_str(OBJECT(dev), name,
qapi_enum_lookup(prop->info->enum_table, value),
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
&error_abort);
}
void qdev_prop_set_array(DeviceState *dev, const char *name, QList *values)
{
qdev: Rework array properties based on list visitor Until now, array properties are actually implemented with a hack that uses multiple properties on the QOM level: a static "foo-len" property and after it is set, dynamically created "foo[i]" properties. In external interfaces (-device on the command line and device_add in QMP), this interface was broken by commit f3558b1b ('qdev: Base object creation on QDict rather than QemuOpts') because QDicts are unordered and therefore it could happen that QEMU tried to set the indexed properties before setting the length, which fails and effectively makes array properties inaccessible. In particular, this affects the 'ports' property of the 'rocker' device, which used to be configured like this: -device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1 This patch reworks the external interface so that instead of using a separate top-level property for the length and for each element, we use a single true array property that accepts a list value. In the external interfaces, this is naturally expressed as a JSON list and makes array properties accessible again. The new syntax looks like this: -device '{"driver":"rocker","ports":["dev0","dev1"]}' Creating an array property on the command line without using JSON format is currently not possible. This could be fixed by switching from QemuOpts to a keyval parser, which however requires consideration of the compatibility implications. All internal users of devices with array properties go through qdev_prop_set_array() at this point, so updating it takes care of all of them. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-09 18:42:40 +01:00
object_property_set_qobject(OBJECT(dev), name, QOBJECT(values),
&error_abort);
qobject_unref(values);
}
static GPtrArray *global_props(void)
{
static GPtrArray *gp;
if (!gp) {
gp = g_ptr_array_new();
}
return gp;
}
void qdev_prop_register_global(GlobalProperty *prop)
{
g_ptr_array_add(global_props(), prop);
}
const GlobalProperty *qdev_find_global_prop(Object *obj,
qdev: Improve netdev property override error a bit qdev_prop_set_netdev() fails when the property already has a non-null value. Seems to go back to commit 30c367ed44 "qdev-properties-system.c: Allow vlan or netdev for -device, not both", v1.7.0. Board code doesn't expect failure, and crashes: $ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0 Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101: qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0 ' Aborted (core dumped) -device and device_add handle the failure: $ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1 qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1' $ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0 QEMU 5.0.50 monitor - type 'help' for more information (qemu) qemu-system-x86_64: warning: netdev net0 has no peer qemu-system-x86_64: warning: netdev net1 has no peer device_add e1000,netdev=net1 Error: Property 'e1000.netdev' doesn't take value 'net1' Perhaps netdev property override could be made to work. Perhaps it should. I'm not the right guy to figure this out. What I can do is improve the error message a bit: (qemu) device_add e1000,netdev=net1 Error: -global e1000.netdev=... conflicts with netdev=net1 Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
2020-06-22 11:42:21 +02:00
const char *name)
{
GPtrArray *props = global_props();
const GlobalProperty *p;
int i;
for (i = 0; i < props->len; i++) {
p = g_ptr_array_index(props, i);
if (object_dynamic_cast(obj, p->driver)
qdev: Improve netdev property override error a bit qdev_prop_set_netdev() fails when the property already has a non-null value. Seems to go back to commit 30c367ed44 "qdev-properties-system.c: Allow vlan or netdev for -device, not both", v1.7.0. Board code doesn't expect failure, and crashes: $ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0 Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101: qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0 ' Aborted (core dumped) -device and device_add handle the failure: $ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1 qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1' $ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0 QEMU 5.0.50 monitor - type 'help' for more information (qemu) qemu-system-x86_64: warning: netdev net0 has no peer qemu-system-x86_64: warning: netdev net1 has no peer device_add e1000,netdev=net1 Error: Property 'e1000.netdev' doesn't take value 'net1' Perhaps netdev property override could be made to work. Perhaps it should. I'm not the right guy to figure this out. What I can do is improve the error message a bit: (qemu) device_add e1000,netdev=net1 Error: -global e1000.netdev=... conflicts with netdev=net1 Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
2020-06-22 11:42:21 +02:00
&& !strcmp(p->property, name)) {
return p;
}
}
return NULL;
}
int qdev_prop_check_globals(void)
{
int i, ret = 0;
for (i = 0; i < global_props()->len; i++) {
GlobalProperty *prop;
ObjectClass *oc;
DeviceClass *dc;
prop = g_ptr_array_index(global_props(), i);
if (prop->used) {
continue;
}
oc = object_class_by_name(prop->driver);
oc = object_class_dynamic_cast(oc, TYPE_DEVICE);
if (!oc) {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 15:57:41 +02:00
warn_report("global %s.%s has invalid class name",
prop->driver, prop->property);
ret = 1;
continue;
}
dc = DEVICE_CLASS(oc);
if (!dc->hotpluggable && !prop->used) {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 15:57:41 +02:00
warn_report("global %s.%s=%s not used",
prop->driver, prop->property, prop->value);
ret = 1;
continue;
}
}
return ret;
}
void qdev_prop_set_globals(DeviceState *dev)
{
object_apply_global_props(OBJECT(dev), global_props(),
dev->hotplugged ? NULL : &error_fatal);
}
/* --- 64bit unsigned int 'size' type --- */
static void get_size(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
uint64_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_size(v, name, ptr, errp);
}
static void set_size(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
uint64_t *ptr = object_field_prop_ptr(obj, prop);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_size(v, name, ptr, errp);
}
const PropertyInfo qdev_prop_size = {
.name = "size",
.get = get_size,
.set = set_size,
.set_default_value = qdev_propinfo_set_default_value_uint,
};
/* --- object link property --- */
static ObjectProperty *create_link_property(ObjectClass *oc, const char *name,
Property *prop)
{
return object_class_property_add_link(oc, name, prop->link_type,
prop->offset,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_STRONG);
}
const PropertyInfo qdev_prop_link = {
.name = "link",
.create = create_link_property,
};
void qdev_property_add_static(DeviceState *dev, Property *prop)
{
Object *obj = OBJECT(dev);
ObjectProperty *op;
assert(!prop->info->create);
op = object_property_add(obj, prop->name, prop->info->name,
field_prop_getter(prop->info),
field_prop_setter(prop->info),
prop->info->release,
prop);
object_property_set_description(obj, prop->name,
prop->info->description);
if (prop->set_default) {
prop->info->set_default_value(op, prop);
if (op->init) {
op->init(obj, op);
}
}
}
static void qdev_class_add_property(DeviceClass *klass, const char *name,
Property *prop)
{
ObjectClass *oc = OBJECT_CLASS(klass);
ObjectProperty *op;
if (prop->info->create) {
op = prop->info->create(oc, name, prop);
} else {
op = object_class_property_add(oc,
name, prop->info->name,
field_prop_getter(prop->info),
field_prop_setter(prop->info),
prop->info->release,
prop);
}
if (prop->set_default) {
prop->info->set_default_value(op, prop);
}
object_class_property_set_description(oc, name, prop->info->description);
}
/**
* Legacy property handling
*/
static void qdev_get_legacy_property(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
Property *prop = opaque;
char buffer[1024];
char *ptr = buffer;
prop->info->print(obj, prop, buffer, sizeof(buffer));
visit_type_str(v, name, &ptr, errp);
}
/**
* qdev_class_add_legacy_property:
* @dev: Device to add the property to.
* @prop: The qdev property definition.
*
* Add a legacy QOM property to @dev for qdev property @prop.
*
* Legacy properties are string versions of QOM properties. The format of
* the string depends on the property type. Legacy properties are only
* needed for "info qtree".
*
* Do not use this in new code! QOM Properties added through this interface
* will be given names in the "legacy" namespace.
*/
static void qdev_class_add_legacy_property(DeviceClass *dc, Property *prop)
{
g_autofree char *name = NULL;
/* Register pointer properties as legacy properties */
if (!prop->info->print && prop->info->get) {
return;
}
name = g_strdup_printf("legacy-%s", prop->name);
object_class_property_add(OBJECT_CLASS(dc), name, "str",
prop->info->print ? qdev_get_legacy_property : prop->info->get,
NULL, NULL, prop);
}
void device_class_set_props(DeviceClass *dc, Property *props)
{
Property *prop;
dc->props_ = props;
for (prop = props; prop && prop->name; prop++) {
qdev_class_add_legacy_property(dc, prop);
qdev_class_add_property(dc, prop->name, prop);
}
}
void qdev_alias_all_properties(DeviceState *target, Object *source)
{
ObjectClass *class;
ObjectPropertyIterator iter;
ObjectProperty *prop;
class = object_get_class(OBJECT(target));
object_class_property_iter_init(&iter, class);
while ((prop = object_property_iter_next(&iter))) {
if (object_property_find(source, prop->name)) {
continue; /* skip duplicate properties */
}
object_property_add_alias(source, prop->name,
OBJECT(target), prop->name);
}
}