OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
98ed805c38
qemu-e2k/tcg/mips/tcg-target.h

133 lines
4.0 KiB
C
Raw Normal View History

tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/*
* Tiny Code Generator for QEMU
*
* Copyright (c) 2008-2009 Arnaud Patard <arnaud.patard@rtp-net.org>
* Copyright (c) 2009 Aurelien Jarno <aurelien@aurel32.net>
* Based on i386/tcg-target.c - Copyright (c) 2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
janitor: add guards to headers Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06 12:15:58 +01:00
#ifndef TCG_TARGET_MIPS
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#define TCG_TARGET_MIPS 1
#ifdef __MIPSEB__
# define TCG_TARGET_WORDS_BIGENDIAN
#endif
#define TCG_TARGET_NB_REGS 32
tcg: Standardize on TCGReg as the enum for hard registers Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-09 09:03:33 +01:00
typedef enum {
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
TCG_REG_ZERO = 0,
TCG_REG_AT,
TCG_REG_V0,
TCG_REG_V1,
TCG_REG_A0,
TCG_REG_A1,
TCG_REG_A2,
TCG_REG_A3,
TCG_REG_T0,
TCG_REG_T1,
TCG_REG_T2,
TCG_REG_T3,
TCG_REG_T4,
TCG_REG_T5,
TCG_REG_T6,
TCG_REG_T7,
TCG_REG_S0,
TCG_REG_S1,
TCG_REG_S2,
TCG_REG_S3,
TCG_REG_S4,
TCG_REG_S5,
TCG_REG_S6,
TCG_REG_S7,
TCG_REG_T8,
TCG_REG_T9,
TCG_REG_K0,
TCG_REG_K1,
TCG_REG_GP,
TCG_REG_SP,
TCG_REG_FP,
TCG_REG_RA,
tcg: Standardize on TCGReg as the enum for hard registers Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-09 09:03:33 +01:00
} TCGReg;
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#define TCG_CT_CONST_ZERO 0x100
#define TCG_CT_CONST_U16 0x200
#define TCG_CT_CONST_S16 0x400
/* used for function call generation */
#define TCG_REG_CALL_STACK TCG_REG_SP
#define TCG_TARGET_STACK_ALIGN 8
#define TCG_TARGET_CALL_STACK_OFFSET 16
#define TCG_TARGET_CALL_ALIGN_ARGS 1
/* optional instructions */
tcg: Always define all of the TCGOpcode enum members. By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-17 23:11:46 +02:00
#define TCG_TARGET_HAS_div_i32 1
#define TCG_TARGET_HAS_not_i32 1
#define TCG_TARGET_HAS_nor_i32 1
#define TCG_TARGET_HAS_ext8s_i32 1
#define TCG_TARGET_HAS_ext16s_i32 1
#define TCG_TARGET_HAS_andc_i32 0
#define TCG_TARGET_HAS_orc_i32 0
#define TCG_TARGET_HAS_eqv_i32 0
#define TCG_TARGET_HAS_nand_i32 0
tcg/mips: implement movcond op on MIPS32R2 movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
/* optional instructions only implemented on MIPS4, MIPS32 and Loongson 2 */
tcg/mips: fix MIPS32(R2) detection Fix the MIPS32(R2) cpu detection so that it also works with -march=octeon. Thanks to Andrew Pinski for the hint. Cc: Andrew Pinski <apinski@cavium.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22 23:08:38 +02:00
#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 1)) || \
defined(_MIPS_ARCH_LOONGSON2E) || defined(_MIPS_ARCH_LOONGSON2F) || \
defined(_MIPS_ARCH_MIPS4)
tcg/mips: implement movcond op on MIPS32R2 movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_movcond_i32 1
#else
tcg: Introduce movcond Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:13:34 +02:00
#define TCG_TARGET_HAS_movcond_i32 0
tcg/mips: implement movcond op on MIPS32R2 movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#endif
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
tcg/mips: optimize bswap{16,16s,32} on MIPS32R2 bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
/* optional instructions only implemented on MIPS32R2 */
tcg/mips: fix MIPS32(R2) detection Fix the MIPS32(R2) cpu detection so that it also works with -march=octeon. Thanks to Andrew Pinski for the hint. Cc: Andrew Pinski <apinski@cavium.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22 23:08:38 +02:00
#if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
tcg/mips: optimize bswap{16,16s,32} on MIPS32R2 bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_bswap16_i32 1
#define TCG_TARGET_HAS_bswap32_i32 1
tcg/mips: implement rotl/rotr ops on MIPS32R2 rotr operations can be optimized on MIPS32 Release 2 using the ROTR and ROTRV instructions. Also implemented rotl operations by subtracting the shift from 32. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_rot_i32 1
tcg/mips: implement deposit op on MIPS32R2 deposit operations can be optimized on MIPS32 Release 2 using the INS instruction. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_deposit_i32 1
tcg/mips: optimize bswap{16,16s,32} on MIPS32R2 bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#else
#define TCG_TARGET_HAS_bswap16_i32 0
#define TCG_TARGET_HAS_bswap32_i32 0
tcg/mips: implement rotl/rotr ops on MIPS32R2 rotr operations can be optimized on MIPS32 Release 2 using the ROTR and ROTRV instructions. Also implemented rotl operations by subtracting the shift from 32. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_rot_i32 0
tcg/mips: implement deposit op on MIPS32R2 deposit operations can be optimized on MIPS32 Release 2 using the INS instruction. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#define TCG_TARGET_HAS_deposit_i32 0
tcg/mips: optimize bswap{16,16s,32} on MIPS32R2 bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
#endif
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/* optional instructions automatically implemented */
tcg: Always define all of the TCGOpcode enum members. By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-17 23:11:46 +02:00
#define TCG_TARGET_HAS_neg_i32 0 /* sub rd, zero, rt */
#define TCG_TARGET_HAS_ext8u_i32 0 /* andi rt, rs, 0xff */
#define TCG_TARGET_HAS_ext16u_i32 0 /* andi rt, rs, 0xffff */
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
tcp/mips: Change TCG_AREG0 (fp -> s0) Register fp (frame pointer) is a bad choice for compilations without optimisation, because the compiler makes heavy use of this register (so the resulting code crashes). Register s0 had been used for TCG_AREG1 in earlier releases, but was no longer used and is now free for TCG_AREG0. The resulting code works for compilations without optimisation (tested with qemu mips in qemu mips on x86 host). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 17:28:40 +02:00
#define TCG_AREG0 TCG_REG_S0
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD. Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-26 05:06:00 +02:00
#ifdef __OpenBSD__
#include <machine/sysarch.h>
#else
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#include <sys/cachectl.h>
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD. Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-26 05:06:00 +02:00
#endif
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
w64: Change data type of parameters for flush_icache_range The TCG targets i386 and tci needed a change of the function prototype for w64. This change is currently not needed for the other TCG targets, but it can be applied to avoid code differences. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-02 23:30:05 +01:00
static inline void flush_icache_range(tcg_target_ulong start,
tcg_target_ulong stop)
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
{
cacheflush ((void *)start, stop-start, ICACHE);
}
janitor: add guards to headers Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06 12:15:58 +01:00
#endif
Reference in New Issue Copy Permalink