qemu-e2k/block/raw-posix.c

2834 lines
76 KiB
C
Raw Normal View History

/*
* Block driver for RAW files (posix)
*
* Copyright (c) 2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
#include "qemu/log.h"
#include "block/block_int.h"
#include "qemu/module.h"
#include "trace.h"
#include "block/thread-pool.h"
#include "qemu/iov.h"
#include "raw-aio.h"
#include "qapi/util.h"
#include "qapi/qmp/qstring.h"
#if defined(__APPLE__) && (__MACH__)
#include <paths.h>
#include <sys/param.h>
#include <IOKit/IOKitLib.h>
#include <IOKit/IOBSD.h>
#include <IOKit/storage/IOMediaBSDClient.h>
#include <IOKit/storage/IOMedia.h>
#include <IOKit/storage/IOCDMedia.h>
//#include <IOKit/storage/IOCDTypes.h>
#include <CoreFoundation/CoreFoundation.h>
#endif
#ifdef __sun__
#define _POSIX_PTHREAD_SEMANTICS 1
#include <sys/dkio.h>
#endif
#ifdef __linux__
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/param.h>
#include <linux/cdrom.h>
#include <linux/fd.h>
#include <linux/fs.h>
#include <linux/hdreg.h>
#include <scsi/sg.h>
#ifdef __s390__
#include <asm/dasd.h>
#endif
#ifndef FS_NOCOW_FL
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
#endif
#endif
#if defined(CONFIG_FALLOCATE_PUNCH_HOLE) || defined(CONFIG_FALLOCATE_ZERO_RANGE)
#include <linux/falloc.h>
#endif
#if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
#include <sys/disk.h>
#include <sys/cdio.h>
#endif
#ifdef __OpenBSD__
#include <sys/ioctl.h>
#include <sys/disklabel.h>
#include <sys/dkio.h>
#endif
#ifdef __NetBSD__
#include <sys/ioctl.h>
#include <sys/disklabel.h>
#include <sys/dkio.h>
#include <sys/disk.h>
#endif
#ifdef __DragonFly__
#include <sys/ioctl.h>
#include <sys/diskslice.h>
#endif
#ifdef CONFIG_XFS
#include <xfs/xfs.h>
#endif
//#define DEBUG_BLOCK
#ifdef DEBUG_BLOCK
# define DEBUG_BLOCK_PRINT 1
#else
# define DEBUG_BLOCK_PRINT 0
#endif
#define DPRINTF(fmt, ...) \
do { \
if (DEBUG_BLOCK_PRINT) { \
printf(fmt, ## __VA_ARGS__); \
} \
} while (0)
/* OS X does not have O_DSYNC */
#ifndef O_DSYNC
#ifdef O_SYNC
#define O_DSYNC O_SYNC
#elif defined(O_FSYNC)
#define O_DSYNC O_FSYNC
#endif
#endif
/* Approximate O_DIRECT with O_DSYNC if O_DIRECT isn't available */
#ifndef O_DIRECT
#define O_DIRECT O_DSYNC
#endif
#define FTYPE_FILE 0
#define FTYPE_CD 1
#define FTYPE_FD 2
/* if the FD is not accessed during that time (in ns), we try to
reopen it to see if the disk has been changed */
#define FD_OPEN_TIMEOUT (1000000000)
#define MAX_BLOCKSIZE 4096
typedef struct BDRVRawState {
int fd;
int type;
int open_flags;
size_t buf_align;
#if defined(__linux__)
/* linux floppy specific */
int64_t fd_open_time;
int64_t fd_error_time;
int fd_got_error;
int fd_media_changed;
#endif
#ifdef CONFIG_LINUX_AIO
int use_aio;
void *aio_ctx;
#endif
#ifdef CONFIG_XFS
bool is_xfs:1;
#endif
bool has_discard:1;
bool has_write_zeroes:1;
bool discard_zeroes:1;
bool has_fallocate;
bool needs_alignment;
} BDRVRawState;
typedef struct BDRVRawReopenState {
int fd;
int open_flags;
#ifdef CONFIG_LINUX_AIO
int use_aio;
#endif
} BDRVRawReopenState;
static int fd_open(BlockDriverState *bs);
static int64_t raw_getlength(BlockDriverState *bs);
typedef struct RawPosixAIOData {
BlockDriverState *bs;
int aio_fildes;
union {
struct iovec *aio_iov;
void *aio_ioctl_buf;
};
int aio_niov;
uint64_t aio_nbytes;
#define aio_ioctl_cmd aio_nbytes /* for QEMU_AIO_IOCTL */
off_t aio_offset;
int aio_type;
} RawPosixAIOData;
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
static int cdrom_reopen(BlockDriverState *bs);
#endif
#if defined(__NetBSD__)
static int raw_normalize_devicepath(const char **filename)
{
static char namebuf[PATH_MAX];
const char *dp, *fname;
struct stat sb;
fname = *filename;
dp = strrchr(fname, '/');
if (lstat(fname, &sb) < 0) {
fprintf(stderr, "%s: stat failed: %s\n",
fname, strerror(errno));
return -errno;
}
if (!S_ISBLK(sb.st_mode)) {
return 0;
}
if (dp == NULL) {
snprintf(namebuf, PATH_MAX, "r%s", fname);
} else {
snprintf(namebuf, PATH_MAX, "%.*s/r%s",
(int)(dp - fname), fname, dp + 1);
}
fprintf(stderr, "%s is a block device", fname);
*filename = namebuf;
fprintf(stderr, ", using %s\n", *filename);
return 0;
}
#else
static int raw_normalize_devicepath(const char **filename)
{
return 0;
}
#endif
/*
* Get logical block size via ioctl. On success store it in @sector_size_p.
*/
static int probe_logical_blocksize(int fd, unsigned int *sector_size_p)
{
unsigned int sector_size;
bool success = false;
errno = ENOTSUP;
/* Try a few ioctls to get the right size */
#ifdef BLKSSZGET
if (ioctl(fd, BLKSSZGET, &sector_size) >= 0) {
*sector_size_p = sector_size;
success = true;
}
#endif
#ifdef DKIOCGETBLOCKSIZE
if (ioctl(fd, DKIOCGETBLOCKSIZE, &sector_size) >= 0) {
*sector_size_p = sector_size;
success = true;
}
#endif
#ifdef DIOCGSECTORSIZE
if (ioctl(fd, DIOCGSECTORSIZE, &sector_size) >= 0) {
*sector_size_p = sector_size;
success = true;
}
#endif
return success ? 0 : -errno;
}
/**
* Get physical block size of @fd.
* On success, store it in @blk_size and return 0.
* On failure, return -errno.
*/
static int probe_physical_blocksize(int fd, unsigned int *blk_size)
{
#ifdef BLKPBSZGET
if (ioctl(fd, BLKPBSZGET, blk_size) < 0) {
return -errno;
}
return 0;
#else
return -ENOTSUP;
#endif
}
/* Check if read is allowed with given memory buffer and length.
*
* This function is used to check O_DIRECT memory buffer and request alignment.
*/
static bool raw_is_io_aligned(int fd, void *buf, size_t len)
{
ssize_t ret = pread(fd, buf, len, 0);
if (ret >= 0) {
return true;
}
#ifdef __linux__
/* The Linux kernel returns EINVAL for misaligned O_DIRECT reads. Ignore
* other errors (e.g. real I/O error), which could happen on a failed
* drive, since we only care about probing alignment.
*/
if (errno != EINVAL) {
return true;
}
#endif
return false;
}
static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
{
BDRVRawState *s = bs->opaque;
char *buf;
block: align bounce buffers to page The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-12 16:30:56 +02:00
size_t max_align = MAX(MAX_BLOCKSIZE, getpagesize());
/* For SCSI generic devices the alignment is not really used.
With buffered I/O, we don't have any restrictions. */
if (bdrv_is_sg(bs) || !s->needs_alignment) {
bs->request_alignment = 1;
s->buf_align = 1;
return;
}
bs->request_alignment = 0;
s->buf_align = 0;
/* Let's try to use the logical blocksize for the alignment. */
if (probe_logical_blocksize(fd, &bs->request_alignment) < 0) {
bs->request_alignment = 0;
}
#ifdef CONFIG_XFS
if (s->is_xfs) {
struct dioattr da;
if (xfsctl(NULL, fd, XFS_IOC_DIOINFO, &da) >= 0) {
bs->request_alignment = da.d_miniosz;
/* The kernel returns wrong information for d_mem */
/* s->buf_align = da.d_mem; */
}
}
#endif
/* If we could not get the sizes so far, we can only guess them */
if (!s->buf_align) {
size_t align;
block: align bounce buffers to page The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-12 16:30:56 +02:00
buf = qemu_memalign(max_align, 2 * max_align);
for (align = 512; align <= max_align; align <<= 1) {
if (raw_is_io_aligned(fd, buf + align, max_align)) {
s->buf_align = align;
break;
}
}
qemu_vfree(buf);
}
if (!bs->request_alignment) {
size_t align;
block: align bounce buffers to page The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-12 16:30:56 +02:00
buf = qemu_memalign(s->buf_align, max_align);
for (align = 512; align <= max_align; align <<= 1) {
if (raw_is_io_aligned(fd, buf, align)) {
bs->request_alignment = align;
break;
}
}
qemu_vfree(buf);
}
if (!s->buf_align || !bs->request_alignment) {
error_setg(errp, "Could not find working O_DIRECT alignment. "
"Try cache.direct=off.");
}
}
static void raw_parse_flags(int bdrv_flags, int *open_flags)
{
assert(open_flags != NULL);
*open_flags |= O_BINARY;
*open_flags &= ~O_ACCMODE;
if (bdrv_flags & BDRV_O_RDWR) {
*open_flags |= O_RDWR;
} else {
*open_flags |= O_RDONLY;
}
/* Use O_DSYNC for write-through caching, no flags for write-back caching,
* and O_DIRECT for no caching. */
if ((bdrv_flags & BDRV_O_NOCACHE)) {
*open_flags |= O_DIRECT;
}
}
static void raw_detach_aio_context(BlockDriverState *bs)
{
#ifdef CONFIG_LINUX_AIO
BDRVRawState *s = bs->opaque;
if (s->use_aio) {
laio_detach_aio_context(s->aio_ctx, bdrv_get_aio_context(bs));
}
#endif
}
static void raw_attach_aio_context(BlockDriverState *bs,
AioContext *new_context)
{
#ifdef CONFIG_LINUX_AIO
BDRVRawState *s = bs->opaque;
if (s->use_aio) {
laio_attach_aio_context(s->aio_ctx, new_context);
}
#endif
}
#ifdef CONFIG_LINUX_AIO
static int raw_set_aio(void **aio_ctx, int *use_aio, int bdrv_flags)
{
int ret = -1;
assert(aio_ctx != NULL);
assert(use_aio != NULL);
/*
* Currently Linux do AIO only for files opened with O_DIRECT
* specified so check NOCACHE flag too
*/
if ((bdrv_flags & (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) ==
(BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) {
/* if non-NULL, laio_init() has already been run */
if (*aio_ctx == NULL) {
*aio_ctx = laio_init();
if (!*aio_ctx) {
goto error;
}
}
*use_aio = 1;
} else {
*use_aio = 0;
}
ret = 0;
error:
return ret;
}
#endif
static void raw_parse_filename(const char *filename, QDict *options,
Error **errp)
{
/* The filename does not have to be prefixed by the protocol name, since
* "file" is the default protocol; therefore, the return value of this
* function call can be ignored. */
strstart(filename, "file:", &filename);
qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
}
static QemuOptsList raw_runtime_opts = {
.name = "raw",
.head = QTAILQ_HEAD_INITIALIZER(raw_runtime_opts.head),
.desc = {
{
.name = "filename",
.type = QEMU_OPT_STRING,
.help = "File name of the image",
},
{ /* end of list */ }
},
};
static int raw_open_common(BlockDriverState *bs, QDict *options,
int bdrv_flags, int open_flags, Error **errp)
{
BDRVRawState *s = bs->opaque;
QemuOpts *opts;
Error *local_err = NULL;
const char *filename = NULL;
int fd, ret;
struct stat st;
opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto fail;
}
filename = qemu_opt_get(opts, "filename");
ret = raw_normalize_devicepath(&filename);
if (ret != 0) {
error_setg_errno(errp, -ret, "Could not normalize device path");
goto fail;
}
s->open_flags = open_flags;
raw_parse_flags(bdrv_flags, &s->open_flags);
s->fd = -1;
fd = qemu_open(filename, s->open_flags, 0644);
if (fd < 0) {
ret = -errno;
if (ret == -EROFS) {
ret = -EACCES;
}
goto fail;
}
s->fd = fd;
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
#ifdef CONFIG_LINUX_AIO
if (raw_set_aio(&s->aio_ctx, &s->use_aio, bdrv_flags)) {
qemu_close(fd);
ret = -errno;
error_setg_errno(errp, -ret, "Could not set AIO state");
goto fail;
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
}
if (!s->use_aio && (bdrv_flags & BDRV_O_NATIVE_AIO)) {
error_printf("WARNING: aio=native was specified for '%s', but "
"it requires cache.direct=on, which was not "
"specified. Falling back to aio=threads.\n"
" This will become an error condition in "
"future QEMU versions.\n",
bs->filename);
}
#endif
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
s->has_discard = true;
s->has_write_zeroes = true;
if ((bs->open_flags & BDRV_O_NOCACHE) != 0) {
s->needs_alignment = true;
}
if (fstat(s->fd, &st) < 0) {
ret = -errno;
error_setg_errno(errp, errno, "Could not stat file");
goto fail;
}
if (S_ISREG(st.st_mode)) {
s->discard_zeroes = true;
s->has_fallocate = true;
}
if (S_ISBLK(st.st_mode)) {
#ifdef BLKDISCARDZEROES
unsigned int arg;
if (ioctl(s->fd, BLKDISCARDZEROES, &arg) == 0 && arg) {
s->discard_zeroes = true;
}
#endif
#ifdef __linux__
/* On Linux 3.10, BLKDISCARD leaves stale data in the page cache. Do
* not rely on the contents of discarded blocks unless using O_DIRECT.
* Same for BLKZEROOUT.
*/
if (!(bs->open_flags & BDRV_O_NOCACHE)) {
s->discard_zeroes = false;
s->has_write_zeroes = false;
}
#endif
}
#ifdef __FreeBSD__
if (S_ISCHR(st.st_mode)) {
/*
* The file is a char device (disk), which on FreeBSD isn't behind
* a pager, so force all requests to be aligned. This is needed
* so QEMU makes sure all IO operations on the device are aligned
* to sector size, or else FreeBSD will reject them with EINVAL.
*/
s->needs_alignment = true;
}
#endif
#ifdef CONFIG_XFS
if (platform_test_xfs_fd(s->fd)) {
s->is_xfs = true;
}
#endif
raw_attach_aio_context(bs, bdrv_get_aio_context(bs));
ret = 0;
fail:
if (filename && (bdrv_flags & BDRV_O_TEMPORARY)) {
unlink(filename);
}
qemu_opts_del(opts);
return ret;
}
static int raw_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
s->type = FTYPE_FILE;
ret = raw_open_common(bs, options, flags, 0, &local_err);
if (local_err) {
error_propagate(errp, local_err);
}
return ret;
}
static int raw_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
BDRVRawState *s;
BDRVRawReopenState *raw_s;
int ret = 0;
Error *local_err = NULL;
assert(state != NULL);
assert(state->bs != NULL);
s = state->bs->opaque;
state->opaque = g_new0(BDRVRawReopenState, 1);
raw_s = state->opaque;
#ifdef CONFIG_LINUX_AIO
raw_s->use_aio = s->use_aio;
/* we can use s->aio_ctx instead of a copy, because the use_aio flag is
* valid in the 'false' condition even if aio_ctx is set, and raw_set_aio()
* won't override aio_ctx if aio_ctx is non-NULL */
if (raw_set_aio(&s->aio_ctx, &raw_s->use_aio, state->flags)) {
error_setg(errp, "Could not set AIO state");
return -1;
}
#endif
if (s->type == FTYPE_FD || s->type == FTYPE_CD) {
raw_s->open_flags |= O_NONBLOCK;
}
raw_parse_flags(state->flags, &raw_s->open_flags);
raw_s->fd = -1;
int fcntl_flags = O_APPEND | O_NONBLOCK;
#ifdef O_NOATIME
fcntl_flags |= O_NOATIME;
#endif
#ifdef O_ASYNC
/* Not all operating systems have O_ASYNC, and those that don't
* will not let us track the state into raw_s->open_flags (typically
* you achieve the same effect with an ioctl, for example I_SETSIG
* on Solaris). But we do not use O_ASYNC, so that's fine.
*/
assert((s->open_flags & O_ASYNC) == 0);
#endif
if ((raw_s->open_flags & ~fcntl_flags) == (s->open_flags & ~fcntl_flags)) {
/* dup the original fd */
/* TODO: use qemu fcntl wrapper */
#ifdef F_DUPFD_CLOEXEC
raw_s->fd = fcntl(s->fd, F_DUPFD_CLOEXEC, 0);
#else
raw_s->fd = dup(s->fd);
if (raw_s->fd != -1) {
qemu_set_cloexec(raw_s->fd);
}
#endif
if (raw_s->fd >= 0) {
ret = fcntl_setfl(raw_s->fd, raw_s->open_flags);
if (ret) {
qemu_close(raw_s->fd);
raw_s->fd = -1;
}
}
}
/* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
if (raw_s->fd == -1) {
const char *normalized_filename = state->bs->filename;
ret = raw_normalize_devicepath(&normalized_filename);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not normalize device path");
} else {
assert(!(raw_s->open_flags & O_CREAT));
raw_s->fd = qemu_open(normalized_filename, raw_s->open_flags);
if (raw_s->fd == -1) {
error_setg_errno(errp, errno, "Could not reopen file");
ret = -1;
}
}
}
/* Fail already reopen_prepare() if we can't get a working O_DIRECT
* alignment with the new fd. */
if (raw_s->fd != -1) {
raw_probe_alignment(state->bs, raw_s->fd, &local_err);
if (local_err) {
qemu_close(raw_s->fd);
raw_s->fd = -1;
error_propagate(errp, local_err);
ret = -EINVAL;
}
}
return ret;
}
static void raw_reopen_commit(BDRVReopenState *state)
{
BDRVRawReopenState *raw_s = state->opaque;
BDRVRawState *s = state->bs->opaque;
s->open_flags = raw_s->open_flags;
qemu_close(s->fd);
s->fd = raw_s->fd;
#ifdef CONFIG_LINUX_AIO
s->use_aio = raw_s->use_aio;
#endif
g_free(state->opaque);
state->opaque = NULL;
}
static void raw_reopen_abort(BDRVReopenState *state)
{
BDRVRawReopenState *raw_s = state->opaque;
/* nothing to do if NULL, we didn't get far enough */
if (raw_s == NULL) {
return;
}
if (raw_s->fd >= 0) {
qemu_close(raw_s->fd);
raw_s->fd = -1;
}
g_free(state->opaque);
state->opaque = NULL;
}
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVRawState *s = bs->opaque;
raw_probe_alignment(bs, s->fd, errp);
bs->bl.min_mem_alignment = s->buf_align;
block: align bounce buffers to page The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-12 16:30:56 +02:00
bs->bl.opt_mem_alignment = MAX(s->buf_align, getpagesize());
}
static int check_for_dasd(int fd)
{
#ifdef BIODASDINFO2
struct dasd_information2_t info = {0};
return ioctl(fd, BIODASDINFO2, &info);
#else
return -1;
#endif
}
/**
* Try to get @bs's logical and physical block size.
* On success, store them in @bsz and return zero.
* On failure, return negative errno.
*/
static int hdev_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
{
BDRVRawState *s = bs->opaque;
int ret;
/* If DASD, get blocksizes */
if (check_for_dasd(s->fd) < 0) {
return -ENOTSUP;
}
ret = probe_logical_blocksize(s->fd, &bsz->log);
if (ret < 0) {
return ret;
}
return probe_physical_blocksize(s->fd, &bsz->phys);
}
/**
* Try to get @bs's geometry: cyls, heads, sectors.
* On success, store them in @geo and return 0.
* On failure return -errno.
* (Allows block driver to assign default geometry values that guest sees)
*/
#ifdef __linux__
static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
{
BDRVRawState *s = bs->opaque;
struct hd_geometry ioctl_geo = {0};
uint32_t blksize;
/* If DASD, get its geometry */
if (check_for_dasd(s->fd) < 0) {
return -ENOTSUP;
}
if (ioctl(s->fd, HDIO_GETGEO, &ioctl_geo) < 0) {
return -errno;
}
/* HDIO_GETGEO may return success even though geo contains zeros
(e.g. certain multipath setups) */
if (!ioctl_geo.heads || !ioctl_geo.sectors || !ioctl_geo.cylinders) {
return -ENOTSUP;
}
/* Do not return a geometry for partition */
if (ioctl_geo.start != 0) {
return -ENOTSUP;
}
geo->heads = ioctl_geo.heads;
geo->sectors = ioctl_geo.sectors;
if (!probe_physical_blocksize(s->fd, &blksize)) {
/* overwrite cyls: HDIO_GETGEO result is incorrect for big drives */
geo->cylinders = bdrv_nb_sectors(bs) / (blksize / BDRV_SECTOR_SIZE)
/ (geo->heads * geo->sectors);
return 0;
}
geo->cylinders = ioctl_geo.cylinders;
return 0;
}
#else /* __linux__ */
static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
{
return -ENOTSUP;
}
#endif
static ssize_t handle_aiocb_ioctl(RawPosixAIOData *aiocb)
{
int ret;
ret = ioctl(aiocb->aio_fildes, aiocb->aio_ioctl_cmd, aiocb->aio_ioctl_buf);
if (ret == -1) {
return -errno;
}
return 0;
}
static ssize_t handle_aiocb_flush(RawPosixAIOData *aiocb)
{
int ret;
ret = qemu_fdatasync(aiocb->aio_fildes);
if (ret == -1) {
return -errno;
}
return 0;
}
#ifdef CONFIG_PREADV
static bool preadv_present = true;
static ssize_t
qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset)
{
return preadv(fd, iov, nr_iov, offset);
}
static ssize_t
qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset)
{
return pwritev(fd, iov, nr_iov, offset);
}
#else
static bool preadv_present = false;
static ssize_t
qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset)
{
return -ENOSYS;
}
static ssize_t
qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset)
{
return -ENOSYS;
}
#endif
static ssize_t handle_aiocb_rw_vector(RawPosixAIOData *aiocb)
{
ssize_t len;
do {
if (aiocb->aio_type & QEMU_AIO_WRITE)
len = qemu_pwritev(aiocb->aio_fildes,
aiocb->aio_iov,
aiocb->aio_niov,
aiocb->aio_offset);
else
len = qemu_preadv(aiocb->aio_fildes,
aiocb->aio_iov,
aiocb->aio_niov,
aiocb->aio_offset);
} while (len == -1 && errno == EINTR);
if (len == -1) {
return -errno;
}
return len;
}
/*
* Read/writes the data to/from a given linear buffer.
*
* Returns the number of bytes handles or -errno in case of an error. Short
* reads are only returned if the end of the file is reached.
*/
static ssize_t handle_aiocb_rw_linear(RawPosixAIOData *aiocb, char *buf)
{
ssize_t offset = 0;
ssize_t len;
while (offset < aiocb->aio_nbytes) {
if (aiocb->aio_type & QEMU_AIO_WRITE) {
len = pwrite(aiocb->aio_fildes,
(const char *)buf + offset,
aiocb->aio_nbytes - offset,
aiocb->aio_offset + offset);
} else {
len = pread(aiocb->aio_fildes,
buf + offset,
aiocb->aio_nbytes - offset,
aiocb->aio_offset + offset);
}
if (len == -1 && errno == EINTR) {
continue;
} else if (len == -1 && errno == EINVAL &&
(aiocb->bs->open_flags & BDRV_O_NOCACHE) &&
!(aiocb->aio_type & QEMU_AIO_WRITE) &&
offset > 0) {
/* O_DIRECT pread() may fail with EINVAL when offset is unaligned
* after a short read. Assume that O_DIRECT short reads only occur
* at EOF. Therefore this is a short read, not an I/O error.
*/
break;
} else if (len == -1) {
offset = -errno;
break;
} else if (len == 0) {
break;
}
offset += len;
}
return offset;
}
static ssize_t handle_aiocb_rw(RawPosixAIOData *aiocb)
{
ssize_t nbytes;
char *buf;
if (!(aiocb->aio_type & QEMU_AIO_MISALIGNED)) {
/*
* If there is just a single buffer, and it is properly aligned
* we can just use plain pread/pwrite without any problems.
*/
if (aiocb->aio_niov == 1) {
return handle_aiocb_rw_linear(aiocb, aiocb->aio_iov->iov_base);
}
/*
* We have more than one iovec, and all are properly aligned.
*
* Try preadv/pwritev first and fall back to linearizing the
* buffer if it's not supported.
*/
if (preadv_present) {
nbytes = handle_aiocb_rw_vector(aiocb);
if (nbytes == aiocb->aio_nbytes ||
(nbytes < 0 && nbytes != -ENOSYS)) {
return nbytes;
}
preadv_present = false;
}
/*
* XXX(hch): short read/write. no easy way to handle the reminder
* using these interfaces. For now retry using plain
* pread/pwrite?
*/
}
/*
* Ok, we have to do it the hard way, copy all segments into
* a single aligned buffer.
*/
buf = qemu_try_blockalign(aiocb->bs, aiocb->aio_nbytes);
if (buf == NULL) {
return -ENOMEM;
}
if (aiocb->aio_type & QEMU_AIO_WRITE) {
char *p = buf;
int i;
for (i = 0; i < aiocb->aio_niov; ++i) {
memcpy(p, aiocb->aio_iov[i].iov_base, aiocb->aio_iov[i].iov_len);
p += aiocb->aio_iov[i].iov_len;
}
assert(p - buf == aiocb->aio_nbytes);
}
nbytes = handle_aiocb_rw_linear(aiocb, buf);
if (!(aiocb->aio_type & QEMU_AIO_WRITE)) {
char *p = buf;
size_t count = aiocb->aio_nbytes, copy;
int i;
for (i = 0; i < aiocb->aio_niov && count; ++i) {
copy = count;
if (copy > aiocb->aio_iov[i].iov_len) {
copy = aiocb->aio_iov[i].iov_len;
}
memcpy(aiocb->aio_iov[i].iov_base, p, copy);
assert(count >= copy);
p += copy;
count -= copy;
}
assert(count == 0);
}
qemu_vfree(buf);
return nbytes;
}
#ifdef CONFIG_XFS
static int xfs_write_zeroes(BDRVRawState *s, int64_t offset, uint64_t bytes)
{
struct xfs_flock64 fl;
int err;
memset(&fl, 0, sizeof(fl));
fl.l_whence = SEEK_SET;
fl.l_start = offset;
fl.l_len = bytes;
if (xfsctl(NULL, s->fd, XFS_IOC_ZERO_RANGE, &fl) < 0) {
err = errno;
DPRINTF("cannot write zero range (%s)\n", strerror(errno));
return -err;
}
return 0;
}
static int xfs_discard(BDRVRawState *s, int64_t offset, uint64_t bytes)
{
struct xfs_flock64 fl;
int err;
memset(&fl, 0, sizeof(fl));
fl.l_whence = SEEK_SET;
fl.l_start = offset;
fl.l_len = bytes;
if (xfsctl(NULL, s->fd, XFS_IOC_UNRESVSP64, &fl) < 0) {
err = errno;
DPRINTF("cannot punch hole (%s)\n", strerror(errno));
return -err;
}
return 0;
}
#endif
static int translate_err(int err)
{
if (err == -ENODEV || err == -ENOSYS || err == -EOPNOTSUPP ||
err == -ENOTTY) {
err = -ENOTSUP;
}
return err;
}
#ifdef CONFIG_FALLOCATE
static int do_fallocate(int fd, int mode, off_t offset, off_t len)
{
do {
if (fallocate(fd, mode, offset, len) == 0) {
return 0;
}
} while (errno == EINTR);
return translate_err(-errno);
}
#endif
static ssize_t handle_aiocb_write_zeroes_block(RawPosixAIOData *aiocb)
{
int ret = -ENOTSUP;
BDRVRawState *s = aiocb->bs->opaque;
if (!s->has_write_zeroes) {
return -ENOTSUP;
}
#ifdef BLKZEROOUT
do {
uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
if (ioctl(aiocb->aio_fildes, BLKZEROOUT, range) == 0) {
return 0;
}
} while (errno == EINTR);
ret = translate_err(-errno);
#endif
if (ret == -ENOTSUP) {
s->has_write_zeroes = false;
}
return ret;
}
static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
{
#if defined(CONFIG_FALLOCATE) || defined(CONFIG_XFS)
BDRVRawState *s = aiocb->bs->opaque;
#endif
if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
return handle_aiocb_write_zeroes_block(aiocb);
}
#ifdef CONFIG_XFS
if (s->is_xfs) {
return xfs_write_zeroes(s, aiocb->aio_offset, aiocb->aio_nbytes);
}
#endif
#ifdef CONFIG_FALLOCATE_ZERO_RANGE
if (s->has_write_zeroes) {
int ret = do_fallocate(s->fd, FALLOC_FL_ZERO_RANGE,
aiocb->aio_offset, aiocb->aio_nbytes);
if (ret == 0 || ret != -ENOTSUP) {
return ret;
}
s->has_write_zeroes = false;
}
#endif
#ifdef CONFIG_FALLOCATE_PUNCH_HOLE
if (s->has_discard && s->has_fallocate) {
int ret = do_fallocate(s->fd,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
aiocb->aio_offset, aiocb->aio_nbytes);
if (ret == 0) {
ret = do_fallocate(s->fd, 0, aiocb->aio_offset, aiocb->aio_nbytes);
if (ret == 0 || ret != -ENOTSUP) {
return ret;
}
s->has_fallocate = false;
} else if (ret != -ENOTSUP) {
return ret;
} else {
s->has_discard = false;
}
}
#endif
#ifdef CONFIG_FALLOCATE
if (s->has_fallocate && aiocb->aio_offset >= bdrv_getlength(aiocb->bs)) {
int ret = do_fallocate(s->fd, 0, aiocb->aio_offset, aiocb->aio_nbytes);
if (ret == 0 || ret != -ENOTSUP) {
return ret;
}
s->has_fallocate = false;
}
#endif
return -ENOTSUP;
}
static ssize_t handle_aiocb_discard(RawPosixAIOData *aiocb)
{
int ret = -EOPNOTSUPP;
BDRVRawState *s = aiocb->bs->opaque;
if (!s->has_discard) {
return -ENOTSUP;
}
if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
#ifdef BLKDISCARD
do {
uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
if (ioctl(aiocb->aio_fildes, BLKDISCARD, range) == 0) {
return 0;
}
} while (errno == EINTR);
ret = -errno;
#endif
} else {
#ifdef CONFIG_XFS
if (s->is_xfs) {
return xfs_discard(s, aiocb->aio_offset, aiocb->aio_nbytes);
}
#endif
#ifdef CONFIG_FALLOCATE_PUNCH_HOLE
ret = do_fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
aiocb->aio_offset, aiocb->aio_nbytes);
#endif
}
ret = translate_err(ret);
if (ret == -ENOTSUP) {
s->has_discard = false;
}
return ret;
}
static int aio_worker(void *arg)
{
RawPosixAIOData *aiocb = arg;
ssize_t ret = 0;
switch (aiocb->aio_type & QEMU_AIO_TYPE_MASK) {
case QEMU_AIO_READ:
ret = handle_aiocb_rw(aiocb);
if (ret >= 0 && ret < aiocb->aio_nbytes) {
iov_memset(aiocb->aio_iov, aiocb->aio_niov, ret,
0, aiocb->aio_nbytes - ret);
ret = aiocb->aio_nbytes;
}
if (ret == aiocb->aio_nbytes) {
ret = 0;
} else if (ret >= 0 && ret < aiocb->aio_nbytes) {
ret = -EINVAL;
}
break;
case QEMU_AIO_WRITE:
ret = handle_aiocb_rw(aiocb);
if (ret == aiocb->aio_nbytes) {
ret = 0;
} else if (ret >= 0 && ret < aiocb->aio_nbytes) {
ret = -EINVAL;
}
break;
case QEMU_AIO_FLUSH:
ret = handle_aiocb_flush(aiocb);
break;
case QEMU_AIO_IOCTL:
ret = handle_aiocb_ioctl(aiocb);
break;
case QEMU_AIO_DISCARD:
ret = handle_aiocb_discard(aiocb);
break;
case QEMU_AIO_WRITE_ZEROES:
ret = handle_aiocb_write_zeroes(aiocb);
break;
default:
fprintf(stderr, "invalid aio request (0x%x)\n", aiocb->aio_type);
ret = -EINVAL;
break;
}
g_slice_free(RawPosixAIOData, aiocb);
return ret;
}
static int paio_submit_co(BlockDriverState *bs, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
int type)
{
RawPosixAIOData *acb = g_slice_new(RawPosixAIOData);
ThreadPool *pool;
acb->bs = bs;
acb->aio_type = type;
acb->aio_fildes = fd;
acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
if (qiov) {
acb->aio_iov = qiov->iov;
acb->aio_niov = qiov->niov;
assert(qiov->size == acb->aio_nbytes);
}
trace_paio_submit_co(sector_num, nb_sectors, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
return thread_pool_submit_co(pool, aio_worker, acb);
}
static BlockAIOCB *paio_submit(BlockDriverState *bs, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque, int type)
{
RawPosixAIOData *acb = g_slice_new(RawPosixAIOData);
ThreadPool *pool;
acb->bs = bs;
acb->aio_type = type;
acb->aio_fildes = fd;
acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
if (qiov) {
acb->aio_iov = qiov->iov;
acb->aio_niov = qiov->niov;
assert(qiov->size == acb->aio_nbytes);
}
trace_paio_submit(acb, opaque, sector_num, nb_sectors, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
return thread_pool_submit_aio(pool, aio_worker, acb, cb, opaque);
}
static BlockAIOCB *raw_aio_submit(BlockDriverState *bs,
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque, int type)
{
BDRVRawState *s = bs->opaque;
if (fd_open(bs) < 0)
return NULL;
/*
* Check if the underlying device requires requests to be aligned,
* and if the request we are trying to submit is aligned or not.
* If this is the case tell the low-level driver that it needs
* to copy the buffer.
*/
if (s->needs_alignment) {
if (!bdrv_qiov_is_aligned(bs, qiov)) {
type |= QEMU_AIO_MISALIGNED;
#ifdef CONFIG_LINUX_AIO
} else if (s->use_aio) {
return laio_submit(bs, s->aio_ctx, s->fd, sector_num, qiov,
nb_sectors, cb, opaque, type);
#endif
}
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
}
return paio_submit(bs, s->fd, sector_num, qiov, nb_sectors,
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
cb, opaque, type);
}
static void raw_aio_plug(BlockDriverState *bs)
{
#ifdef CONFIG_LINUX_AIO
BDRVRawState *s = bs->opaque;
if (s->use_aio) {
laio_io_plug(bs, s->aio_ctx);
}
#endif
}
static void raw_aio_unplug(BlockDriverState *bs)
{
#ifdef CONFIG_LINUX_AIO
BDRVRawState *s = bs->opaque;
if (s->use_aio) {
laio_io_unplug(bs, s->aio_ctx, true);
}
#endif
}
static void raw_aio_flush_io_queue(BlockDriverState *bs)
{
#ifdef CONFIG_LINUX_AIO
BDRVRawState *s = bs->opaque;
if (s->use_aio) {
laio_io_unplug(bs, s->aio_ctx, false);
}
#endif
}
static BlockAIOCB *raw_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
return raw_aio_submit(bs, sector_num, qiov, nb_sectors,
cb, opaque, QEMU_AIO_READ);
}
static BlockAIOCB *raw_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
raw-posix: refactor AIO support Currently the raw-posix.c code contains a lot of knowledge about the asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c. All this code does not really belong here and is getting a bit in the way of implementing native AIO on Linux. So instead move all the guts of the AIO implementation into posix-aio-compat.c (which might need a better name, btw). There's now a very small interface between the AIO providers and raw-posix.c: - an init routine is called from raw_open_common to return an AIO context for this drive. An AIO implementation may either re-use one context for all drives, or use a different one for each as the Linux native AIO support will do. - an submit routine is called from the aio_reav/writev methods to submit an AIO request There are no indirect calls involved in this interface as we need to decide which one to call manually. We will only call the Linux AIO native init function if we were requested to by vl.c, and we will only call the native submit function if we are asked to and the request is properly aligned. That's also the reason why the alignment check actually does the inverse move and now goes into raw-posix.c. The old posix-aio-compat.h headers is removed now that most of it's content is private to posix-aio-compat.c, and instead we add a new block/raw-posix-aio.h headers is created containing only the tiny interface between raw-posix.c and the AIO implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-20 16:58:19 +02:00
return raw_aio_submit(bs, sector_num, qiov, nb_sectors,
cb, opaque, QEMU_AIO_WRITE);
}
static BlockAIOCB *raw_aio_flush(BlockDriverState *bs,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (fd_open(bs) < 0)
return NULL;
return paio_submit(bs, s->fd, 0, NULL, 0, cb, opaque, QEMU_AIO_FLUSH);
}
static void raw_close(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
raw_detach_aio_context(bs);
#ifdef CONFIG_LINUX_AIO
if (s->use_aio) {
laio_cleanup(s->aio_ctx);
}
#endif
if (s->fd >= 0) {
qemu_close(s->fd);
s->fd = -1;
}
}
static int raw_truncate(BlockDriverState *bs, int64_t offset)
{
BDRVRawState *s = bs->opaque;
struct stat st;
if (fstat(s->fd, &st)) {
return -errno;
}
if (S_ISREG(st.st_mode)) {
if (ftruncate(s->fd, offset) < 0) {
return -errno;
}
} else if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
if (offset > raw_getlength(bs)) {
return -EINVAL;
}
} else {
return -ENOTSUP;
}
return 0;
}
#ifdef __OpenBSD__
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int fd = s->fd;
struct stat st;
if (fstat(fd, &st))
return -errno;
if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
struct disklabel dl;
if (ioctl(fd, DIOCGDINFO, &dl))
return -errno;
return (uint64_t)dl.d_secsize *
dl.d_partitions[DISKPART(st.st_rdev)].p_size;
} else
return st.st_size;
}
#elif defined(__NetBSD__)
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int fd = s->fd;
struct stat st;
if (fstat(fd, &st))
return -errno;
if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
struct dkwedge_info dkw;
if (ioctl(fd, DIOCGWEDGEINFO, &dkw) != -1) {
return dkw.dkw_size * 512;
} else {
struct disklabel dl;
if (ioctl(fd, DIOCGDINFO, &dl))
return -errno;
return (uint64_t)dl.d_secsize *
dl.d_partitions[DISKPART(st.st_rdev)].p_size;
}
} else
return st.st_size;
}
#elif defined(__sun__)
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
struct dk_minfo minfo;
int ret;
int64_t size;
ret = fd_open(bs);
if (ret < 0) {
return ret;
}
/*
* Use the DKIOCGMEDIAINFO ioctl to read the size.
*/
ret = ioctl(s->fd, DKIOCGMEDIAINFO, &minfo);
if (ret != -1) {
return minfo.dki_lbsize * minfo.dki_capacity;
}
/*
* There are reports that lseek on some devices fails, but
* irc discussion said that contingency on contingency was overkill.
*/
size = lseek(s->fd, 0, SEEK_END);
if (size < 0) {
return -errno;
}
return size;
}
#elif defined(CONFIG_BSD)
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int fd = s->fd;
int64_t size;
struct stat sb;
#if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
int reopened = 0;
#endif
int ret;
ret = fd_open(bs);
if (ret < 0)
return ret;
#if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
again:
#endif
if (!fstat(fd, &sb) && (S_IFCHR & sb.st_mode)) {
#ifdef DIOCGMEDIASIZE
if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
#elif defined(DIOCGPART)
{
struct partinfo pi;
if (ioctl(fd, DIOCGPART, &pi) == 0)
size = pi.media_size;
else
size = 0;
}
if (size == 0)
#endif
#if defined(__APPLE__) && defined(__MACH__)
{
uint64_t sectors = 0;
uint32_t sector_size = 0;
if (ioctl(fd, DKIOCGETBLOCKCOUNT, &sectors) == 0
&& ioctl(fd, DKIOCGETBLOCKSIZE, &sector_size) == 0) {
size = sectors * sector_size;
} else {
size = lseek(fd, 0LL, SEEK_END);
if (size < 0) {
return -errno;
}
}
}
#else
size = lseek(fd, 0LL, SEEK_END);
if (size < 0) {
return -errno;
}
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
switch(s->type) {
case FTYPE_CD:
/* XXX FreeBSD acd returns UINT_MAX sectors for an empty drive */
if (size == 2048LL * (unsigned)-1)
size = 0;
/* XXX no disc? maybe we need to reopen... */
if (size <= 0 && !reopened && cdrom_reopen(bs) >= 0) {
reopened = 1;
goto again;
}
}
#endif
} else {
size = lseek(fd, 0, SEEK_END);
if (size < 0) {
return -errno;
}
}
return size;
}
#else
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int ret;
int64_t size;
ret = fd_open(bs);
if (ret < 0) {
return ret;
}
size = lseek(s->fd, 0, SEEK_END);
if (size < 0) {
return -errno;
}
return size;
}
#endif
static int64_t raw_get_allocated_file_size(BlockDriverState *bs)
{
struct stat st;
BDRVRawState *s = bs->opaque;
if (fstat(s->fd, &st) < 0) {
return -errno;
}
return (int64_t)st.st_blocks * 512;
}
static int raw_create(const char *filename, QemuOpts *opts, Error **errp)
{
int fd;
int result = 0;
int64_t total_size = 0;
bool nocow = false;
PreallocMode prealloc;
char *buf = NULL;
Error *local_err = NULL;
strstart(filename, "file:", &filename);
/* Read out options */
total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
nocow = qemu_opt_get_bool(opts, BLOCK_OPT_NOCOW, false);
buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
prealloc = qapi_enum_parse(PreallocMode_lookup, buf,
PREALLOC_MODE_MAX, PREALLOC_MODE_OFF,
&local_err);
g_free(buf);
if (local_err) {
error_propagate(errp, local_err);
result = -EINVAL;
goto out;
}
fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
0644);
if (fd < 0) {
result = -errno;
error_setg_errno(errp, -result, "Could not create file");
goto out;
}
if (nocow) {
#ifdef __linux__
/* Set NOCOW flag to solve performance issue on fs like btrfs.
* This is an optimisation. The FS_IOC_SETFLAGS ioctl return value
* will be ignored since any failure of this operation should not
* block the left work.
*/
int attr;
if (ioctl(fd, FS_IOC_GETFLAGS, &attr) == 0) {
attr |= FS_NOCOW_FL;
ioctl(fd, FS_IOC_SETFLAGS, &attr);
}
#endif
}
if (ftruncate(fd, total_size) != 0) {
result = -errno;
error_setg_errno(errp, -result, "Could not resize file");
goto out_close;
}
switch (prealloc) {
#ifdef CONFIG_POSIX_FALLOCATE
case PREALLOC_MODE_FALLOC:
/* posix_fallocate() doesn't set errno. */
result = -posix_fallocate(fd, 0, total_size);
if (result != 0) {
error_setg_errno(errp, -result,
"Could not preallocate data for the new file");
}
break;
#endif
case PREALLOC_MODE_FULL:
{
int64_t num = 0, left = total_size;
buf = g_malloc0(65536);
while (left > 0) {
num = MIN(left, 65536);
result = write(fd, buf, num);
if (result < 0) {
result = -errno;
error_setg_errno(errp, -result,
"Could not write to the new file");
break;
}
left -= result;
}
if (result >= 0) {
result = fsync(fd);
if (result < 0) {
result = -errno;
error_setg_errno(errp, -result,
"Could not flush new file to disk");
}
}
g_free(buf);
break;
}
case PREALLOC_MODE_OFF:
break;
default:
result = -EINVAL;
error_setg(errp, "Unsupported preallocation mode: %s",
PreallocMode_lookup[prealloc]);
break;
}
out_close:
if (qemu_close(fd) != 0 && result == 0) {
result = -errno;
error_setg_errno(errp, -result, "Could not close the new file");
}
out:
return result;
}
/*
* Find allocation range in @bs around offset @start.
* May change underlying file descriptor's file offset.
* If @start is not in a hole, store @start in @data, and the
* beginning of the next hole in @hole, and return 0.
* If @start is in a non-trailing hole, store @start in @hole and the
* beginning of the next non-hole in @data, and return 0.
* If @start is in a trailing hole or beyond EOF, return -ENXIO.
* If we can't find out, return a negative errno other than -ENXIO.
*/
static int find_allocation(BlockDriverState *bs, off_t start,
off_t *data, off_t *hole)
{
#if defined SEEK_HOLE && defined SEEK_DATA
BDRVRawState *s = bs->opaque;
off_t offs;
/*
* SEEK_DATA cases:
* D1. offs == start: start is in data
* D2. offs > start: start is in a hole, next data at offs
* D3. offs < 0, errno = ENXIO: either start is in a trailing hole
* or start is beyond EOF
* If the latter happens, the file has been truncated behind
* our back since we opened it. All bets are off then.
* Treating like a trailing hole is simplest.
* D4. offs < 0, errno != ENXIO: we learned nothing
*/
offs = lseek(s->fd, start, SEEK_DATA);
if (offs < 0) {
return -errno; /* D3 or D4 */
}
assert(offs >= start);
if (offs > start) {
/* D2: in hole, next data at offs */
*hole = start;
*data = offs;
return 0;
}
/* D1: in data, end not yet known */
/*
* SEEK_HOLE cases:
* H1. offs == start: start is in a hole
* If this happens here, a hole has been dug behind our back
* since the previous lseek().
* H2. offs > start: either start is in data, next hole at offs,
* or start is in trailing hole, EOF at offs
* Linux treats trailing holes like any other hole: offs ==
* start. Solaris seeks to EOF instead: offs > start (blech).
* If that happens here, a hole has been dug behind our back
* since the previous lseek().
* H3. offs < 0, errno = ENXIO: start is beyond EOF
* If this happens, the file has been truncated behind our
* back since we opened it. Treat it like a trailing hole.
* H4. offs < 0, errno != ENXIO: we learned nothing
* Pretend we know nothing at all, i.e. "forget" about D1.
*/
offs = lseek(s->fd, start, SEEK_HOLE);
if (offs < 0) {
return -errno; /* D1 and (H3 or H4) */
}
assert(offs >= start);
if (offs > start) {
/*
* D1 and H2: either in data, next hole at offs, or it was in
* data but is now in a trailing hole. In the latter case,
* all bets are off. Treating it as if it there was data all
* the way to EOF is safe, so simply do that.
*/
*data = start;
*hole = offs;
return 0;
}
/* D1 and H1 */
return -EBUSY;
#else
return -ENOTSUP;
#endif
}
/*
* Returns the allocation status of the specified sectors.
*
* If 'sector_num' is beyond the end of the disk image the return value is 0
* and 'pnum' is set to 0.
*
* 'pnum' is set to the number of sectors (including and immediately following
* the specified sector) that are known to be in the same
* allocated/unallocated state.
*
* 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
* beyond the end of the disk image it will be clamped.
*/
static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
int64_t sector_num,
int nb_sectors, int *pnum)
{
off_t start, data = 0, hole = 0;
int64_t total_size;
int ret;
ret = fd_open(bs);
if (ret < 0) {
return ret;
}
start = sector_num * BDRV_SECTOR_SIZE;
total_size = bdrv_getlength(bs);
if (total_size < 0) {
return total_size;
} else if (start >= total_size) {
*pnum = 0;
return 0;
} else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
}
ret = find_allocation(bs, start, &data, &hole);
if (ret == -ENXIO) {
/* Trailing hole */
*pnum = nb_sectors;
ret = BDRV_BLOCK_ZERO;
} else if (ret < 0) {
/* No info available, so pretend there are no holes */
*pnum = nb_sectors;
ret = BDRV_BLOCK_DATA;
} else if (data == start) {
/* On a data extent, compute sectors to the end of the extent,
* possibly including a partial sector at EOF. */
*pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, BDRV_SECTOR_SIZE));
ret = BDRV_BLOCK_DATA;
} else {
/* On a hole, compute sectors to the beginning of the next extent. */
assert(hole == start);
*pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
ret = BDRV_BLOCK_ZERO;
}
return ret | BDRV_BLOCK_OFFSET_VALID | start;
}
static coroutine_fn BlockAIOCB *raw_aio_discard(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
return paio_submit(bs, s->fd, sector_num, NULL, nb_sectors,
cb, opaque, QEMU_AIO_DISCARD);
}
static int coroutine_fn raw_co_write_zeroes(
BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
QEMU_AIO_WRITE_ZEROES);
} else if (s->discard_zeroes) {
return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
QEMU_AIO_DISCARD);
}
return -ENOTSUP;
}
static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
BDRVRawState *s = bs->opaque;
bdi->unallocated_blocks_are_zero = s->discard_zeroes;
bdi->can_write_zeroes_with_unmap = s->discard_zeroes;
return 0;
}
static QemuOptsList raw_create_opts = {
.name = "raw-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(raw_create_opts.head),
.desc = {
{
.name = BLOCK_OPT_SIZE,
.type = QEMU_OPT_SIZE,
.help = "Virtual disk size"
},
{
.name = BLOCK_OPT_NOCOW,
.type = QEMU_OPT_BOOL,
.help = "Turn off copy-on-write (valid only on btrfs)"
},
{
.name = BLOCK_OPT_PREALLOC,
.type = QEMU_OPT_STRING,
.help = "Preallocation mode (allowed values: off, falloc, full)"
},
{ /* end of list */ }
}
};
BlockDriver bdrv_file = {
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
.format_name = "file",
.protocol_name = "file",
.instance_size = sizeof(BDRVRawState),
.bdrv_needs_filename = true,
.bdrv_probe = NULL, /* no probe for protocols */
.bdrv_parse_filename = raw_parse_filename,
.bdrv_file_open = raw_open,
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_close = raw_close,
.bdrv_create = raw_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
.bdrv_co_get_block_status = raw_co_get_block_status,
.bdrv_co_write_zeroes = raw_co_write_zeroes,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_aio_discard = raw_aio_discard,
.bdrv_refresh_limits = raw_refresh_limits,
.bdrv_io_plug = raw_aio_plug,
.bdrv_io_unplug = raw_aio_unplug,
.bdrv_flush_io_queue = raw_aio_flush_io_queue,
.bdrv_truncate = raw_truncate,
.bdrv_getlength = raw_getlength,
.bdrv_get_info = raw_get_info,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
.bdrv_detach_aio_context = raw_detach_aio_context,
.bdrv_attach_aio_context = raw_attach_aio_context,
.create_opts = &raw_create_opts,
};
/***********************************************/
/* host device */
#if defined(__APPLE__) && defined(__MACH__)
static kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator );
static kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize );
kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator )
{
kern_return_t kernResult;
mach_port_t masterPort;
CFMutableDictionaryRef classesToMatch;
kernResult = IOMasterPort( MACH_PORT_NULL, &masterPort );
if ( KERN_SUCCESS != kernResult ) {
printf( "IOMasterPort returned %d\n", kernResult );
}
classesToMatch = IOServiceMatching( kIOCDMediaClass );
if ( classesToMatch == NULL ) {
printf( "IOServiceMatching returned a NULL dictionary.\n" );
} else {
CFDictionarySetValue( classesToMatch, CFSTR( kIOMediaEjectableKey ), kCFBooleanTrue );
}
kernResult = IOServiceGetMatchingServices( masterPort, classesToMatch, mediaIterator );
if ( KERN_SUCCESS != kernResult )
{
printf( "IOServiceGetMatchingServices returned %d\n", kernResult );
}
return kernResult;
}
kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize )
{
io_object_t nextMedia;
kern_return_t kernResult = KERN_FAILURE;
*bsdPath = '\0';
nextMedia = IOIteratorNext( mediaIterator );
if ( nextMedia )
{
CFTypeRef bsdPathAsCFString;
bsdPathAsCFString = IORegistryEntryCreateCFProperty( nextMedia, CFSTR( kIOBSDNameKey ), kCFAllocatorDefault, 0 );
if ( bsdPathAsCFString ) {
size_t devPathLength;
strcpy( bsdPath, _PATH_DEV );
strcat( bsdPath, "r" );
devPathLength = strlen( bsdPath );
if ( CFStringGetCString( bsdPathAsCFString, bsdPath + devPathLength, maxPathSize - devPathLength, kCFStringEncodingASCII ) ) {
kernResult = KERN_SUCCESS;
}
CFRelease( bsdPathAsCFString );
}
IOObjectRelease( nextMedia );
}
return kernResult;
}
#endif
static int hdev_probe_device(const char *filename)
{
struct stat st;
/* allow a dedicated CD-ROM driver to match with a higher priority */
if (strstart(filename, "/dev/cdrom", NULL))
return 50;
if (stat(filename, &st) >= 0 &&
(S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode))) {
return 100;
}
return 0;
}
static int check_hdev_writable(BDRVRawState *s)
{
#if defined(BLKROGET)
/* Linux block devices can be configured "read-only" using blockdev(8).
* This is independent of device node permissions and therefore open(2)
* with O_RDWR succeeds. Actual writes fail with EPERM.
*
* bdrv_open() is supposed to fail if the disk is read-only. Explicitly
* check for read-only block devices so that Linux block devices behave
* properly.
*/
struct stat st;
int readonly = 0;
if (fstat(s->fd, &st)) {
return -errno;
}
if (!S_ISBLK(st.st_mode)) {
return 0;
}
if (ioctl(s->fd, BLKROGET, &readonly) < 0) {
return -errno;
}
if (readonly) {
return -EACCES;
}
#endif /* defined(BLKROGET) */
return 0;
}
static void hdev_parse_filename(const char *filename, QDict *options,
Error **errp)
{
/* The prefix is optional, just as for "file". */
strstart(filename, "host_device:", &filename);
qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
}
static bool hdev_is_sg(BlockDriverState *bs)
{
#if defined(__linux__)
struct stat st;
struct sg_scsi_id scsiid;
int sg_version;
if (stat(bs->filename, &st) >= 0 && S_ISCHR(st.st_mode) &&
!bdrv_ioctl(bs, SG_GET_VERSION_NUM, &sg_version) &&
!bdrv_ioctl(bs, SG_GET_SCSI_ID, &scsiid)) {
DPRINTF("SG device found: type=%d, version=%d\n",
scsiid.scsi_type, sg_version);
return true;
}
#endif
return false;
}
static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
#if defined(__APPLE__) && defined(__MACH__)
const char *filename = qdict_get_str(options, "filename");
if (strstart(filename, "/dev/cdrom", NULL)) {
kern_return_t kernResult;
io_iterator_t mediaIterator;
char bsdPath[ MAXPATHLEN ];
int fd;
kernResult = FindEjectableCDMedia( &mediaIterator );
kernResult = GetBSDPath( mediaIterator, bsdPath, sizeof( bsdPath ) );
if ( bsdPath[ 0 ] != '\0' ) {
strcat(bsdPath,"s0");
/* some CDs don't have a partition 0 */
fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
if (fd < 0) {
bsdPath[strlen(bsdPath)-1] = '1';
} else {
qemu_close(fd);
}
filename = bsdPath;
qdict_put(options, "filename", qstring_from_str(filename));
}
if ( mediaIterator )
IOObjectRelease( mediaIterator );
}
#endif
s->type = FTYPE_FILE;
ret = raw_open_common(bs, options, flags, 0, &local_err);
if (ret < 0) {
if (local_err) {
error_propagate(errp, local_err);
}
return ret;
}
/* Since this does ioctl the device must be already opened */
bs->sg = hdev_is_sg(bs);
if (flags & BDRV_O_RDWR) {
ret = check_hdev_writable(s);
if (ret < 0) {
raw_close(bs);
error_setg_errno(errp, -ret, "The device is not writable");
return ret;
}
}
return ret;
}
#if defined(__linux__)
/* Note: we do not have a reliable method to detect if the floppy is
present. The current method is to try to open the floppy at every
I/O and to keep it opened during a few hundreds of ms. */
static int fd_open(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int last_media_present;
if (s->type != FTYPE_FD)
return 0;
last_media_present = (s->fd >= 0);
if (s->fd >= 0 &&
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - s->fd_open_time) >= FD_OPEN_TIMEOUT) {
qemu_close(s->fd);
s->fd = -1;
DPRINTF("Floppy closed\n");
}
if (s->fd < 0) {
if (s->fd_got_error &&
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - s->fd_error_time) < FD_OPEN_TIMEOUT) {
DPRINTF("No floppy (open delayed)\n");
return -EIO;
}
s->fd = qemu_open(bs->filename, s->open_flags & ~O_NONBLOCK);
if (s->fd < 0) {
s->fd_error_time = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
s->fd_got_error = 1;
if (last_media_present)
s->fd_media_changed = 1;
DPRINTF("No floppy\n");
return -EIO;
}
DPRINTF("Floppy opened\n");
}
if (!last_media_present)
s->fd_media_changed = 1;
s->fd_open_time = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
s->fd_got_error = 0;
return 0;
}
static int hdev_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
{
BDRVRawState *s = bs->opaque;
return ioctl(s->fd, req, buf);
}
static BlockAIOCB *hdev_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
RawPosixAIOData *acb;
ThreadPool *pool;
if (fd_open(bs) < 0)
return NULL;
acb = g_slice_new(RawPosixAIOData);
acb->bs = bs;
acb->aio_type = QEMU_AIO_IOCTL;
acb->aio_fildes = s->fd;
acb->aio_offset = 0;
acb->aio_ioctl_buf = buf;
acb->aio_ioctl_cmd = req;
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
return thread_pool_submit_aio(pool, aio_worker, acb, cb, opaque);
}
#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
static int fd_open(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
/* this is just to ensure s->fd is sane (its called by io ops) */
if (s->fd >= 0)
return 0;
return -EIO;
}
#else /* !linux && !FreeBSD */
static int fd_open(BlockDriverState *bs)
{
return 0;
}
#endif /* !linux && !FreeBSD */
static coroutine_fn BlockAIOCB *hdev_aio_discard(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (fd_open(bs) < 0) {
return NULL;
}
return paio_submit(bs, s->fd, sector_num, NULL, nb_sectors,
cb, opaque, QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
}
static coroutine_fn int hdev_co_write_zeroes(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
int rc;
rc = fd_open(bs);
if (rc < 0) {
return rc;
}
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
QEMU_AIO_WRITE_ZEROES|QEMU_AIO_BLKDEV);
} else if (s->discard_zeroes) {
return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
}
return -ENOTSUP;
}
static int hdev_create(const char *filename, QemuOpts *opts,
Error **errp)
{
int fd;
int ret = 0;
struct stat stat_buf;
int64_t total_size = 0;
bool has_prefix;
/* This function is used by all three protocol block drivers and therefore
* any of these three prefixes may be given.
* The return value has to be stored somewhere, otherwise this is an error
* due to -Werror=unused-value. */
has_prefix =
strstart(filename, "host_device:", &filename) ||
strstart(filename, "host_cdrom:" , &filename) ||
strstart(filename, "host_floppy:", &filename);
(void)has_prefix;
ret = raw_normalize_devicepath(&filename);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not normalize device path");
return ret;
}
/* Read out options */
total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
fd = qemu_open(filename, O_WRONLY | O_BINARY);
if (fd < 0) {
ret = -errno;
error_setg_errno(errp, -ret, "Could not open device");
return ret;
}
if (fstat(fd, &stat_buf) < 0) {
ret = -errno;
error_setg_errno(errp, -ret, "Could not stat device");
} else if (!S_ISBLK(stat_buf.st_mode) && !S_ISCHR(stat_buf.st_mode)) {
error_setg(errp,
"The given file is neither a block nor a character device");
ret = -ENODEV;
} else if (lseek(fd, 0, SEEK_END) < total_size) {
error_setg(errp, "Device is too small");
ret = -ENOSPC;
}
qemu_close(fd);
return ret;
}
static BlockDriver bdrv_host_device = {
.format_name = "host_device",
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
.protocol_name = "host_device",
.instance_size = sizeof(BDRVRawState),
.bdrv_needs_filename = true,
.bdrv_probe_device = hdev_probe_device,
.bdrv_parse_filename = hdev_parse_filename,
.bdrv_file_open = hdev_open,
.bdrv_close = raw_close,
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_create = hdev_create,
.create_opts = &raw_create_opts,
.bdrv_co_write_zeroes = hdev_co_write_zeroes,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_aio_discard = hdev_aio_discard,
.bdrv_refresh_limits = raw_refresh_limits,
.bdrv_io_plug = raw_aio_plug,
.bdrv_io_unplug = raw_aio_unplug,
.bdrv_flush_io_queue = raw_aio_flush_io_queue,
.bdrv_truncate = raw_truncate,
.bdrv_getlength = raw_getlength,
.bdrv_get_info = raw_get_info,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
.bdrv_probe_blocksizes = hdev_probe_blocksizes,
.bdrv_probe_geometry = hdev_probe_geometry,
.bdrv_detach_aio_context = raw_detach_aio_context,
.bdrv_attach_aio_context = raw_attach_aio_context,
/* generic scsi device */
#ifdef __linux__
.bdrv_ioctl = hdev_ioctl,
.bdrv_aio_ioctl = hdev_aio_ioctl,
#endif
};
#ifdef __linux__
static void floppy_parse_filename(const char *filename, QDict *options,
Error **errp)
{
/* The prefix is optional, just as for "file". */
strstart(filename, "host_floppy:", &filename);
qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
}
static int floppy_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
s->type = FTYPE_FD;
/* open will not fail even if no floppy is inserted, so add O_NONBLOCK */
ret = raw_open_common(bs, options, flags, O_NONBLOCK, &local_err);
if (ret) {
if (local_err) {
error_propagate(errp, local_err);
}
return ret;
}
/* close fd so that we can reopen it as needed */
qemu_close(s->fd);
s->fd = -1;
s->fd_media_changed = 1;
error_report("Host floppy pass-through is deprecated");
error_printf("Support for it will be removed in a future release.\n");
return 0;
}
static int floppy_probe_device(const char *filename)
{
int fd, ret;
int prio = 0;
struct floppy_struct fdparam;
struct stat st;
if (strstart(filename, "/dev/fd", NULL) &&
!strstart(filename, "/dev/fdset/", NULL) &&
!strstart(filename, "/dev/fd/", NULL)) {
prio = 50;
}
fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
if (fd < 0) {
goto out;
}
ret = fstat(fd, &st);
if (ret == -1 || !S_ISBLK(st.st_mode)) {
goto outc;
}
/* Attempt to detect via a floppy specific ioctl */
ret = ioctl(fd, FDGETPRM, &fdparam);
if (ret >= 0)
prio = 100;
outc:
qemu_close(fd);
out:
return prio;
}
static int floppy_is_inserted(BlockDriverState *bs)
{
return fd_open(bs) >= 0;
}
static int floppy_media_changed(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int ret;
/*
* XXX: we do not have a true media changed indication.
* It does not work if the floppy is changed without trying to read it.
*/
fd_open(bs);
ret = s->fd_media_changed;
s->fd_media_changed = 0;
DPRINTF("Floppy changed=%d\n", ret);
return ret;
}
static void floppy_eject(BlockDriverState *bs, bool eject_flag)
{
BDRVRawState *s = bs->opaque;
int fd;
if (s->fd >= 0) {
qemu_close(s->fd);
s->fd = -1;
}
fd = qemu_open(bs->filename, s->open_flags | O_NONBLOCK);
if (fd >= 0) {
if (ioctl(fd, FDEJECT, 0) < 0)
perror("FDEJECT");
qemu_close(fd);
}
}
static BlockDriver bdrv_host_floppy = {
.format_name = "host_floppy",
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
.protocol_name = "host_floppy",
.instance_size = sizeof(BDRVRawState),
.bdrv_needs_filename = true,
.bdrv_probe_device = floppy_probe_device,
.bdrv_parse_filename = floppy_parse_filename,
.bdrv_file_open = floppy_open,
.bdrv_close = raw_close,
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_create = hdev_create,
.create_opts = &raw_create_opts,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_refresh_limits = raw_refresh_limits,
.bdrv_io_plug = raw_aio_plug,
.bdrv_io_unplug = raw_aio_unplug,
.bdrv_flush_io_queue = raw_aio_flush_io_queue,
.bdrv_truncate = raw_truncate,
2013-10-29 12:18:58 +01:00
.bdrv_getlength = raw_getlength,
.has_variable_length = true,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
.bdrv_detach_aio_context = raw_detach_aio_context,
.bdrv_attach_aio_context = raw_attach_aio_context,
/* removable device support */
.bdrv_is_inserted = floppy_is_inserted,
.bdrv_media_changed = floppy_media_changed,
.bdrv_eject = floppy_eject,
};
#endif
#if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
static void cdrom_parse_filename(const char *filename, QDict *options,
Error **errp)
{
/* The prefix is optional, just as for "file". */
strstart(filename, "host_cdrom:", &filename);
qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
}
#endif
#ifdef __linux__
static int cdrom_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
s->type = FTYPE_CD;
/* open will not fail even if no CD is inserted, so add O_NONBLOCK */
ret = raw_open_common(bs, options, flags, O_NONBLOCK, &local_err);
if (local_err) {
error_propagate(errp, local_err);
}
return ret;
}
static int cdrom_probe_device(const char *filename)
{
int fd, ret;
int prio = 0;
struct stat st;
fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
if (fd < 0) {
goto out;
}
ret = fstat(fd, &st);
if (ret == -1 || !S_ISBLK(st.st_mode)) {
goto outc;
}
/* Attempt to detect via a CDROM specific ioctl */
ret = ioctl(fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
if (ret >= 0)
prio = 100;
outc:
qemu_close(fd);
out:
return prio;
}
static int cdrom_is_inserted(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int ret;
ret = ioctl(s->fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
if (ret == CDS_DISC_OK)
return 1;
return 0;
}
static void cdrom_eject(BlockDriverState *bs, bool eject_flag)
{
BDRVRawState *s = bs->opaque;
if (eject_flag) {
if (ioctl(s->fd, CDROMEJECT, NULL) < 0)
perror("CDROMEJECT");
} else {
if (ioctl(s->fd, CDROMCLOSETRAY, NULL) < 0)
perror("CDROMEJECT");
}
}
static void cdrom_lock_medium(BlockDriverState *bs, bool locked)
{
BDRVRawState *s = bs->opaque;
if (ioctl(s->fd, CDROM_LOCKDOOR, locked) < 0) {
/*
* Note: an error can happen if the distribution automatically
* mounts the CD-ROM
*/
/* perror("CDROM_LOCKDOOR"); */
}
}
static BlockDriver bdrv_host_cdrom = {
.format_name = "host_cdrom",
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
.protocol_name = "host_cdrom",
.instance_size = sizeof(BDRVRawState),
.bdrv_needs_filename = true,
.bdrv_probe_device = cdrom_probe_device,
.bdrv_parse_filename = cdrom_parse_filename,
.bdrv_file_open = cdrom_open,
.bdrv_close = raw_close,
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_create = hdev_create,
.create_opts = &raw_create_opts,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_refresh_limits = raw_refresh_limits,
.bdrv_io_plug = raw_aio_plug,
.bdrv_io_unplug = raw_aio_unplug,
.bdrv_flush_io_queue = raw_aio_flush_io_queue,
.bdrv_truncate = raw_truncate,
2013-10-29 12:18:58 +01:00
.bdrv_getlength = raw_getlength,
.has_variable_length = true,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
.bdrv_detach_aio_context = raw_detach_aio_context,
.bdrv_attach_aio_context = raw_attach_aio_context,
/* removable device support */
.bdrv_is_inserted = cdrom_is_inserted,
.bdrv_eject = cdrom_eject,
.bdrv_lock_medium = cdrom_lock_medium,
/* generic scsi device */
.bdrv_ioctl = hdev_ioctl,
.bdrv_aio_ioctl = hdev_aio_ioctl,
};
#endif /* __linux__ */
#if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
static int cdrom_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
s->type = FTYPE_CD;
ret = raw_open_common(bs, options, flags, 0, &local_err);
if (ret) {
if (local_err) {
error_propagate(errp, local_err);
}
return ret;
}
/* make sure the door isn't locked at this time */
ioctl(s->fd, CDIOCALLOW);
return 0;
}
static int cdrom_probe_device(const char *filename)
{
if (strstart(filename, "/dev/cd", NULL) ||
strstart(filename, "/dev/acd", NULL))
return 100;
return 0;
}
static int cdrom_reopen(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int fd;
/*
* Force reread of possibly changed/newly loaded disc,
* FreeBSD seems to not notice sometimes...
*/
if (s->fd >= 0)
qemu_close(s->fd);
fd = qemu_open(bs->filename, s->open_flags, 0644);
if (fd < 0) {
s->fd = -1;
return -EIO;
}
s->fd = fd;
/* make sure the door isn't locked at this time */
ioctl(s->fd, CDIOCALLOW);
return 0;
}
static int cdrom_is_inserted(BlockDriverState *bs)
{
return raw_getlength(bs) > 0;
}
static void cdrom_eject(BlockDriverState *bs, bool eject_flag)
{
BDRVRawState *s = bs->opaque;
if (s->fd < 0)
return;
(void) ioctl(s->fd, CDIOCALLOW);
if (eject_flag) {
if (ioctl(s->fd, CDIOCEJECT) < 0)
perror("CDIOCEJECT");
} else {
if (ioctl(s->fd, CDIOCCLOSE) < 0)
perror("CDIOCCLOSE");
}
cdrom_reopen(bs);
}
static void cdrom_lock_medium(BlockDriverState *bs, bool locked)
{
BDRVRawState *s = bs->opaque;
if (s->fd < 0)
return;
if (ioctl(s->fd, (locked ? CDIOCPREVENT : CDIOCALLOW)) < 0) {
/*
* Note: an error can happen if the distribution automatically
* mounts the CD-ROM
*/
/* perror("CDROM_LOCKDOOR"); */
}
}
static BlockDriver bdrv_host_cdrom = {
.format_name = "host_cdrom",
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
.protocol_name = "host_cdrom",
.instance_size = sizeof(BDRVRawState),
.bdrv_needs_filename = true,
.bdrv_probe_device = cdrom_probe_device,
.bdrv_parse_filename = cdrom_parse_filename,
.bdrv_file_open = cdrom_open,
.bdrv_close = raw_close,
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_create = hdev_create,
.create_opts = &raw_create_opts,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_refresh_limits = raw_refresh_limits,
.bdrv_io_plug = raw_aio_plug,
.bdrv_io_unplug = raw_aio_unplug,
.bdrv_flush_io_queue = raw_aio_flush_io_queue,
.bdrv_truncate = raw_truncate,
2013-10-29 12:18:58 +01:00
.bdrv_getlength = raw_getlength,
.has_variable_length = true,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
.bdrv_detach_aio_context = raw_detach_aio_context,
.bdrv_attach_aio_context = raw_attach_aio_context,
/* removable device support */
.bdrv_is_inserted = cdrom_is_inserted,
.bdrv_eject = cdrom_eject,
.bdrv_lock_medium = cdrom_lock_medium,
};
#endif /* __FreeBSD__ */
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
static void bdrv_file_init(void)
{
/*
* Register all the drivers. Note that order is important, the driver
* registered last will get probed first.
*/
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
bdrv_register(&bdrv_file);
bdrv_register(&bdrv_host_device);
#ifdef __linux__
bdrv_register(&bdrv_host_floppy);
bdrv_register(&bdrv_host_cdrom);
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
bdrv_register(&bdrv_host_cdrom);
#endif
}
block: separate raw images from the file protocol We're running into various problems because the "raw" file access, which is used internally by the various image formats is entangled with the "raw" image format, which maps the VM view 1:1 to a file system. This patch renames the raw file backends to the file protocol which is treated like other protocols (e.g. nbd and http) and adds a new "raw" image format which is just a wrapper around calls to the underlying protocol. The patch is surprisingly simple, besides changing the probing logical in block.c to only look for image formats when using bdrv_open and renaming of the old raw protocols to file there's almost nothing in there. For creating images, a new bdrv_create_file is introduced which guesses the protocol to use. This allows using qemu-img create -f raw (or just using the default) for both files and host devices. Converting the other format drivers to use this function to create their images is left for later patches. The only issues still open are in the handling of the host devices. Firstly in current qemu we can specifiy the host* format names on various command line acceping images, but the new code can't do that without adding some translation. Second the layering breaks the no_zero_init flag in the BlockDriver used by qemu-img. I'm not happy how this is done per-driver instead of per-state so I'll prepare a separate patch to clean this up. There's some more cleanup opportunity after this patch, e.g. using separate lists and registration functions for image formats vs protocols and maybe even host drivers, but this can be done at a later stage. Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT case that I don't quite understand, but which I fear won't work as expected - possibly even before this patch. Note that this patch requires various recent block patches from Kevin and me, which should all be in his block queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-07 22:30:24 +02:00
block_init(bdrv_file_init);