qemu-e2k/block/gluster.c

867 lines
24 KiB
C
Raw Normal View History

block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
/*
* GlusterFS backend for QEMU
*
* Copyright (C) 2012 Bharata B Rao <bharata@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
*
*/
#include "qemu/osdep.h"
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
#include <glusterfs/api/glfs.h>
#include "block/block_int.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/uri.h"
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
typedef struct GlusterAIOCB {
int64_t size;
int ret;
QEMUBH *bh;
Coroutine *coroutine;
AioContext *aio_context;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
} GlusterAIOCB;
typedef struct BDRVGlusterState {
struct glfs *glfs;
struct glfs_fd *fd;
} BDRVGlusterState;
typedef struct GlusterConf {
char *server;
int port;
char *volname;
char *image;
char *transport;
} GlusterConf;
static void qemu_gluster_gconf_free(GlusterConf *gconf)
{
if (gconf) {
g_free(gconf->server);
g_free(gconf->volname);
g_free(gconf->image);
g_free(gconf->transport);
g_free(gconf);
}
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
static int parse_volume_options(GlusterConf *gconf, char *path)
{
char *p, *q;
if (!path) {
return -EINVAL;
}
/* volume */
p = q = path + strspn(path, "/");
p += strcspn(p, "/");
if (*p == '\0') {
return -EINVAL;
}
gconf->volname = g_strndup(q, p - q);
/* image */
p += strspn(p, "/");
if (*p == '\0') {
return -EINVAL;
}
gconf->image = g_strdup(p);
return 0;
}
/*
* file=gluster[+transport]://[server[:port]]/volname/image[?socket=...]
*
* 'gluster' is the protocol.
*
* 'transport' specifies the transport type used to connect to gluster
* management daemon (glusterd). Valid transport types are
* tcp, unix and rdma. If a transport type isn't specified, then tcp
* type is assumed.
*
* 'server' specifies the server where the volume file specification for
* the given volume resides. This can be either hostname, ipv4 address
* or ipv6 address. ipv6 address needs to be within square brackets [ ].
* If transport type is 'unix', then 'server' field should not be specified.
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
* The 'socket' field needs to be populated with the path to unix domain
* socket.
*
* 'port' is the port number on which glusterd is listening. This is optional
* and if not specified, QEMU will send 0 which will make gluster to use the
* default port. If the transport type is unix, then 'port' should not be
* specified.
*
* 'volname' is the name of the gluster volume which contains the VM image.
*
* 'image' is the path to the actual VM image that resides on gluster volume.
*
* Examples:
*
* file=gluster://1.2.3.4/testvol/a.img
* file=gluster+tcp://1.2.3.4/testvol/a.img
* file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
* file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
* file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
* file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
* file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
* file=gluster+rdma://1.2.3.4:24007/testvol/a.img
*/
static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename)
{
URI *uri;
QueryParams *qp = NULL;
bool is_unix = false;
int ret = 0;
uri = uri_parse(filename);
if (!uri) {
return -EINVAL;
}
/* transport */
if (!uri->scheme || !strcmp(uri->scheme, "gluster")) {
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
gconf->transport = g_strdup("tcp");
} else if (!strcmp(uri->scheme, "gluster+tcp")) {
gconf->transport = g_strdup("tcp");
} else if (!strcmp(uri->scheme, "gluster+unix")) {
gconf->transport = g_strdup("unix");
is_unix = true;
} else if (!strcmp(uri->scheme, "gluster+rdma")) {
gconf->transport = g_strdup("rdma");
} else {
ret = -EINVAL;
goto out;
}
ret = parse_volume_options(gconf, uri->path);
if (ret < 0) {
goto out;
}
qp = query_params_parse(uri->query);
if (qp->n > 1 || (is_unix && !qp->n) || (!is_unix && qp->n)) {
ret = -EINVAL;
goto out;
}
if (is_unix) {
if (uri->server || uri->port) {
ret = -EINVAL;
goto out;
}
if (strcmp(qp->p[0].name, "socket")) {
ret = -EINVAL;
goto out;
}
gconf->server = g_strdup(qp->p[0].value);
} else {
gconf->server = g_strdup(uri->server ? uri->server : "localhost");
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
gconf->port = uri->port;
}
out:
if (qp) {
query_params_free(qp);
}
uri_free(uri);
return ret;
}
static struct glfs *qemu_gluster_init(GlusterConf *gconf, const char *filename,
Error **errp)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
struct glfs *glfs = NULL;
int ret;
int old_errno;
ret = qemu_gluster_parseuri(gconf, filename);
if (ret < 0) {
error_setg(errp, "Usage: file=gluster[+transport]://[server[:port]]/"
"volname/image[?socket=...]");
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
errno = -ret;
goto out;
}
glfs = glfs_new(gconf->volname);
if (!glfs) {
goto out;
}
ret = glfs_set_volfile_server(glfs, gconf->transport, gconf->server,
gconf->port);
if (ret < 0) {
goto out;
}
/*
* TODO: Use GF_LOG_ERROR instead of hard code value of 4 here when
* GlusterFS makes GF_LOG_* macros available to libgfapi users.
*/
ret = glfs_set_logging(glfs, "-", 4);
if (ret < 0) {
goto out;
}
ret = glfs_init(glfs);
if (ret) {
error_setg_errno(errp, errno,
"Gluster connection failed for server=%s port=%d "
"volume=%s image=%s transport=%s", gconf->server,
gconf->port, gconf->volname, gconf->image,
gconf->transport);
/* glfs_init sometimes doesn't set errno although docs suggest that */
if (errno == 0)
errno = EINVAL;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
goto out;
}
return glfs;
out:
if (glfs) {
old_errno = errno;
glfs_fini(glfs);
errno = old_errno;
}
return NULL;
}
static void qemu_gluster_complete_aio(void *opaque)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
GlusterAIOCB *acb = (GlusterAIOCB *)opaque;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
qemu_bh_delete(acb->bh);
acb->bh = NULL;
qemu_coroutine_enter(acb->coroutine, NULL);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
/*
* AIO callback routine called from GlusterFS thread.
*/
static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret, void *arg)
{
GlusterAIOCB *acb = (GlusterAIOCB *)arg;
if (!ret || ret == acb->size) {
acb->ret = 0; /* Success */
} else if (ret < 0) {
acb->ret = -errno; /* Read/Write failed */
} else {
acb->ret = -EIO; /* Partial read/write - fail it */
}
acb->bh = aio_bh_new(acb->aio_context, qemu_gluster_complete_aio, acb);
qemu_bh_schedule(acb->bh);
}
/* TODO Convert to fine grained options */
static QemuOptsList runtime_opts = {
.name = "gluster",
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
.name = "filename",
.type = QEMU_OPT_STRING,
.help = "URL to the gluster image",
},
{ /* end of list */ }
},
};
static void qemu_gluster_parse_flags(int bdrv_flags, int *open_flags)
{
assert(open_flags != NULL);
*open_flags |= O_BINARY;
if (bdrv_flags & BDRV_O_RDWR) {
*open_flags |= O_RDWR;
} else {
*open_flags |= O_RDONLY;
}
if ((bdrv_flags & BDRV_O_NOCACHE)) {
*open_flags |= O_DIRECT;
}
}
static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
int bdrv_flags, Error **errp)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
BDRVGlusterState *s = bs->opaque;
int open_flags = 0;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
int ret = 0;
GlusterConf *gconf = g_new0(GlusterConf, 1);
QemuOpts *opts;
Error *local_err = NULL;
const char *filename;
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
filename = qemu_opt_get(opts, "filename");
s->glfs = qemu_gluster_init(gconf, filename, errp);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
if (!s->glfs) {
ret = -errno;
goto out;
}
#ifdef CONFIG_GLUSTERFS_XLATOR_OPT
/* Without this, if fsync fails for a recoverable reason (for instance,
* ENOSPC), gluster will dump its cache, preventing retries. This means
* almost certain data loss. Not all gluster versions support the
* 'resync-failed-syncs-after-fsync' key value, but there is no way to
* discover during runtime if it is supported (this api returns success for
* unknown key/value pairs) */
ret = glfs_set_xlator_option(s->glfs, "*-write-behind",
"resync-failed-syncs-after-fsync",
"on");
if (ret < 0) {
error_setg_errno(errp, errno, "Unable to set xlator key/value pair");
ret = -errno;
goto out;
}
#endif
qemu_gluster_parse_flags(bdrv_flags, &open_flags);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
s->fd = glfs_open(s->glfs, gconf->image, open_flags);
if (!s->fd) {
ret = -errno;
}
out:
qemu_opts_del(opts);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
qemu_gluster_gconf_free(gconf);
if (!ret) {
return ret;
}
if (s->fd) {
glfs_close(s->fd);
}
if (s->glfs) {
glfs_fini(s->glfs);
}
return ret;
}
typedef struct BDRVGlusterReopenState {
struct glfs *glfs;
struct glfs_fd *fd;
} BDRVGlusterReopenState;
static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
int ret = 0;
BDRVGlusterReopenState *reop_s;
GlusterConf *gconf = NULL;
int open_flags = 0;
assert(state != NULL);
assert(state->bs != NULL);
state->opaque = g_new0(BDRVGlusterReopenState, 1);
reop_s = state->opaque;
qemu_gluster_parse_flags(state->flags, &open_flags);
gconf = g_new0(GlusterConf, 1);
reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, errp);
if (reop_s->glfs == NULL) {
ret = -errno;
goto exit;
}
#ifdef CONFIG_GLUSTERFS_XLATOR_OPT
ret = glfs_set_xlator_option(reop_s->glfs, "*-write-behind",
"resync-failed-syncs-after-fsync", "on");
if (ret < 0) {
error_setg_errno(errp, errno, "Unable to set xlator key/value pair");
ret = -errno;
goto exit;
}
#endif
reop_s->fd = glfs_open(reop_s->glfs, gconf->image, open_flags);
if (reop_s->fd == NULL) {
/* reops->glfs will be cleaned up in _abort */
ret = -errno;
goto exit;
}
exit:
/* state->opaque will be freed in either the _abort or _commit */
qemu_gluster_gconf_free(gconf);
return ret;
}
static void qemu_gluster_reopen_commit(BDRVReopenState *state)
{
BDRVGlusterReopenState *reop_s = state->opaque;
BDRVGlusterState *s = state->bs->opaque;
/* close the old */
if (s->fd) {
glfs_close(s->fd);
}
if (s->glfs) {
glfs_fini(s->glfs);
}
/* use the newly opened image / connection */
s->fd = reop_s->fd;
s->glfs = reop_s->glfs;
g_free(state->opaque);
state->opaque = NULL;
return;
}
static void qemu_gluster_reopen_abort(BDRVReopenState *state)
{
BDRVGlusterReopenState *reop_s = state->opaque;
if (reop_s == NULL) {
return;
}
if (reop_s->fd) {
glfs_close(reop_s->fd);
}
if (reop_s->glfs) {
glfs_fini(reop_s->glfs);
}
g_free(state->opaque);
state->opaque = NULL;
return;
}
#ifdef CONFIG_GLUSTERFS_ZEROFILL
static coroutine_fn int qemu_gluster_co_write_zeroes(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
{
int ret;
GlusterAIOCB acb;
BDRVGlusterState *s = bs->opaque;
off_t size = nb_sectors * BDRV_SECTOR_SIZE;
off_t offset = sector_num * BDRV_SECTOR_SIZE;
acb.size = size;
acb.ret = 0;
acb.coroutine = qemu_coroutine_self();
acb.aio_context = bdrv_get_aio_context(bs);
ret = glfs_zerofill_async(s->fd, offset, size, gluster_finish_aiocb, &acb);
if (ret < 0) {
return -errno;
}
qemu_coroutine_yield();
return acb.ret;
}
static inline bool gluster_supports_zerofill(void)
{
return 1;
}
static inline int qemu_gluster_zerofill(struct glfs_fd *fd, int64_t offset,
int64_t size)
{
return glfs_zerofill(fd, offset, size);
}
#else
static inline bool gluster_supports_zerofill(void)
{
return 0;
}
static inline int qemu_gluster_zerofill(struct glfs_fd *fd, int64_t offset,
int64_t size)
{
return 0;
}
#endif
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
static int qemu_gluster_create(const char *filename,
QemuOpts *opts, Error **errp)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
struct glfs *glfs;
struct glfs_fd *fd;
int ret = 0;
int prealloc = 0;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
int64_t total_size = 0;
char *tmp = NULL;
GlusterConf *gconf = g_new0(GlusterConf, 1);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
glfs = qemu_gluster_init(gconf, filename, errp);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
if (!glfs) {
ret = -errno;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
goto out;
}
total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
tmp = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
if (!tmp || !strcmp(tmp, "off")) {
prealloc = 0;
} else if (!strcmp(tmp, "full") &&
gluster_supports_zerofill()) {
prealloc = 1;
} else {
error_setg(errp, "Invalid preallocation mode: '%s'"
" or GlusterFS doesn't support zerofill API",
tmp);
ret = -EINVAL;
goto out;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
fd = glfs_creat(glfs, gconf->image,
O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, S_IRUSR | S_IWUSR);
if (!fd) {
ret = -errno;
} else {
if (!glfs_ftruncate(fd, total_size)) {
if (prealloc && qemu_gluster_zerofill(fd, 0, total_size)) {
ret = -errno;
}
} else {
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
ret = -errno;
}
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
if (glfs_close(fd) != 0) {
ret = -errno;
}
}
out:
g_free(tmp);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
qemu_gluster_gconf_free(gconf);
if (glfs) {
glfs_fini(glfs);
}
return ret;
}
static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, int write)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
int ret;
GlusterAIOCB acb;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
BDRVGlusterState *s = bs->opaque;
size_t size = nb_sectors * BDRV_SECTOR_SIZE;
off_t offset = sector_num * BDRV_SECTOR_SIZE;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
acb.size = size;
acb.ret = 0;
acb.coroutine = qemu_coroutine_self();
acb.aio_context = bdrv_get_aio_context(bs);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
if (write) {
ret = glfs_pwritev_async(s->fd, qiov->iov, qiov->niov, offset, 0,
gluster_finish_aiocb, &acb);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
} else {
ret = glfs_preadv_async(s->fd, qiov->iov, qiov->niov, offset, 0,
gluster_finish_aiocb, &acb);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
if (ret < 0) {
return -errno;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
qemu_coroutine_yield();
return acb.ret;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
static int qemu_gluster_truncate(BlockDriverState *bs, int64_t offset)
{
int ret;
BDRVGlusterState *s = bs->opaque;
ret = glfs_ftruncate(s->fd, offset);
if (ret < 0) {
return -errno;
}
return 0;
}
static coroutine_fn int qemu_gluster_co_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
return qemu_gluster_co_rw(bs, sector_num, nb_sectors, qiov, 0);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
static coroutine_fn int qemu_gluster_co_writev(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
return qemu_gluster_co_rw(bs, sector_num, nb_sectors, qiov, 1);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
static void qemu_gluster_close(BlockDriverState *bs)
{
BDRVGlusterState *s = bs->opaque;
if (s->fd) {
glfs_close(s->fd);
s->fd = NULL;
}
glfs_fini(s->glfs);
}
static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
{
int ret;
GlusterAIOCB acb;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
BDRVGlusterState *s = bs->opaque;
acb.size = 0;
acb.ret = 0;
acb.coroutine = qemu_coroutine_self();
acb.aio_context = bdrv_get_aio_context(bs);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
ret = glfs_fsync_async(s->fd, gluster_finish_aiocb, &acb);
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
if (ret < 0) {
ret = -errno;
goto error;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
qemu_coroutine_yield();
if (acb.ret < 0) {
ret = acb.ret;
goto error;
}
return acb.ret;
error:
/* Some versions of Gluster (3.5.6 -> 3.5.8?) will not retain its cache
* after a fsync failure, so we have no way of allowing the guest to safely
* continue. Gluster versions prior to 3.5.6 don't retain the cache
* either, but will invalidate the fd on error, so this is again our only
* option.
*
* The 'resync-failed-syncs-after-fsync' xlator option for the
* write-behind cache will cause later gluster versions to retain its
* cache after error, so long as the fd remains open. However, we
* currently have no way of knowing if this option is supported.
*
* TODO: Once gluster provides a way for us to determine if the option
* is supported, bypass the closure and setting drv to NULL. */
qemu_gluster_close(bs);
bs->drv = NULL;
return ret;
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
}
#ifdef CONFIG_GLUSTERFS_DISCARD
static coroutine_fn int qemu_gluster_co_discard(BlockDriverState *bs,
int64_t sector_num, int nb_sectors)
{
int ret;
GlusterAIOCB acb;
BDRVGlusterState *s = bs->opaque;
size_t size = nb_sectors * BDRV_SECTOR_SIZE;
off_t offset = sector_num * BDRV_SECTOR_SIZE;
acb.size = 0;
acb.ret = 0;
acb.coroutine = qemu_coroutine_self();
acb.aio_context = bdrv_get_aio_context(bs);
ret = glfs_discard_async(s->fd, offset, size, gluster_finish_aiocb, &acb);
if (ret < 0) {
return -errno;
}
qemu_coroutine_yield();
return acb.ret;
}
#endif
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
static int64_t qemu_gluster_getlength(BlockDriverState *bs)
{
BDRVGlusterState *s = bs->opaque;
int64_t ret;
ret = glfs_lseek(s->fd, 0, SEEK_END);
if (ret < 0) {
return -errno;
} else {
return ret;
}
}
static int64_t qemu_gluster_allocated_file_size(BlockDriverState *bs)
{
BDRVGlusterState *s = bs->opaque;
struct stat st;
int ret;
ret = glfs_fstat(s->fd, &st);
if (ret < 0) {
return -errno;
} else {
return st.st_blocks * 512;
}
}
static int qemu_gluster_has_zero_init(BlockDriverState *bs)
{
/* GlusterFS volume could be backed by a block device */
return 0;
}
static QemuOptsList qemu_gluster_create_opts = {
.name = "qemu-gluster-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(qemu_gluster_create_opts.head),
.desc = {
{
.name = BLOCK_OPT_SIZE,
.type = QEMU_OPT_SIZE,
.help = "Virtual disk size"
},
{
.name = BLOCK_OPT_PREALLOC,
.type = QEMU_OPT_STRING,
.help = "Preallocation mode (allowed values: off, full)"
},
{ /* end of list */ }
}
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
};
static BlockDriver bdrv_gluster = {
.format_name = "gluster",
.protocol_name = "gluster",
.instance_size = sizeof(BDRVGlusterState),
.bdrv_needs_filename = true,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_close = qemu_gluster_close,
.bdrv_create = qemu_gluster_create,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
.bdrv_has_zero_init = qemu_gluster_has_zero_init,
#ifdef CONFIG_GLUSTERFS_DISCARD
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
};
static BlockDriver bdrv_gluster_tcp = {
.format_name = "gluster",
.protocol_name = "gluster+tcp",
.instance_size = sizeof(BDRVGlusterState),
.bdrv_needs_filename = true,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_close = qemu_gluster_close,
.bdrv_create = qemu_gluster_create,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
.bdrv_has_zero_init = qemu_gluster_has_zero_init,
#ifdef CONFIG_GLUSTERFS_DISCARD
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
};
static BlockDriver bdrv_gluster_unix = {
.format_name = "gluster",
.protocol_name = "gluster+unix",
.instance_size = sizeof(BDRVGlusterState),
.bdrv_needs_filename = true,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_close = qemu_gluster_close,
.bdrv_create = qemu_gluster_create,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
.bdrv_has_zero_init = qemu_gluster_has_zero_init,
#ifdef CONFIG_GLUSTERFS_DISCARD
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
};
static BlockDriver bdrv_gluster_rdma = {
.format_name = "gluster",
.protocol_name = "gluster+rdma",
.instance_size = sizeof(BDRVGlusterState),
.bdrv_needs_filename = true,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_close = qemu_gluster_close,
.bdrv_create = qemu_gluster_create,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
.bdrv_has_zero_init = qemu_gluster_has_zero_init,
#ifdef CONFIG_GLUSTERFS_DISCARD
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
block: Support GlusterFS as a QEMU block backend. This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27 16:00:32 +02:00
};
static void bdrv_gluster_init(void)
{
bdrv_register(&bdrv_gluster_rdma);
bdrv_register(&bdrv_gluster_unix);
bdrv_register(&bdrv_gluster_tcp);
bdrv_register(&bdrv_gluster);
}
block_init(bdrv_gluster_init);